Assessing the influences of ß-glucan on highland barley starch: Insights into gelatinization and molecular interactions.

Developing highland barley products is complex, possibly due to the presence of ß-glucan in highland barley. This study aims to investigate the impact of ß-glucan on the physicochemical properties, microstructure, and molecular interactions of highland barley starch (HBS) during gelatinization and aging. Increasing the ß-glucan content significantly reduced peak viscosity, setback viscosity, and breakdown viscosity, indicating altered gelatinization behavior. The ß-glucan content increase caused a significant drop in peak viscosity. With 20% ß-glucan addition, it reduced by 883 mPa·s, nearly 38%. Rheological analysis showed a transition from a solid-like to a liquid-like texture or quality, ultimately leading to a shear-thinning behavior. Fourier-transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) confirmed the interaction between HBS and ß-glucan via intermolecular hydrogen bonding, promoting the formation of double helical structures in starch. These findings provide a deeper understanding of the role of ß-glucan in the processing of highland barley, highlighting its influence on the starch's properties.

Alanine and glutamate catabolism collaborate to ensure the success of Bacillus subtilis sporulation.

Sporulation as a typical bacterial differentiation process has been studied for decades. However, two crucial aspects of sporulation, (i) the energy sources supporting the process, and (ii) the maintenance of spore dormancy throughout sporulation, are scarcely explored. Here, we reported the crucial role of RocG-mediated glutamate catabolism in regulating mother cell lysis, a critical step for sporulation completion of Bacillus subtilis, likely by providing energy metabolite ATP. Notably, rocG overexpression resulted in an excessive ATP accumulation in sporulating cells, leading to adverse effects on future spore properties, e.g. increased germination efficiency, reduced DPA content, and lowered heat resistance. Additionally, we revealed that Ald-mediated alanine metabolism was highly related to the inhibition of premature germination and the maintenance of spore dormancy during sporulation, which might be achieved by decreasing the typical germinant L-alanine concentration in sporulating environment. Our data inferred that sporulation of B. subtilis was a highly orchestrated biological process requiring a delicate balance in diverse metabolic pathways, hence ensuring both the completion of sporulation and production of high-quality spores.

Reconstruction of TNF-α with specific isoelectric point released from SPIONs basing on variable charge to enhance pH-sensitive controlled-release.

The clinical application of tumor necrosis factor-α (TNF-α) is limited by its short half-life, subeffective concentration in the targeted area and severe systemic toxicity. In this study, the recombinant polypeptide S4-TNF-α was constructed and coupled with chitosan-modified superparamagnetic iron oxide nanoparticles (S4-TNF-α-SPIONs) to achieve pH-sensitive controlled release and active tumor targeting activity. The isoelectric point (pI) of S4-TNF-α was reconstructed to approach the pH of the tumor microenvironment. The negative-charge S4-TNF-α was adsorbed to chitosan-modified superparamagnetic iron oxide nanoparticles (CS-SPIONs) with a positive charge through electrostatic adsorption at physiological pH. The acidic tumor microenvironment endowed S4-TNF-α with a zero charge, which accelerated S4-TNF-α release from CS-SPIONs. Our studies showed that S4-TNF-α-SPIONs displayed an ideal pH-sensitive controlled release capacity and improved antitumor effects. Our study presents a novel approach to enhance the pH-sensitive controlled-release of genetically engineered drugs by adjusting their pI to match the pH of the tumor microenvironment.

A review on fermented vegetables: Microbial community and potential upgrading strategy via inoculated fermentation.

Fermentation is a traditional method utilized for vegetable preservation, with microorganisms playing a crucial role in the process. Nowadays, traditional spontaneous fermentation methods are widely employed, which excessively depend on the microorganisms attached to the surface of raw materials, resulting in great difficulties in ideal control over the fermentation process. To achieve standardized production and improve product quality, it is essential to promote inoculated fermentation. In this way, starter cultures can dominate the fermentation processes successfully. Unfortunately, inoculated fermentation has not been thoroughly studied and applied. Therefore, this paper provides a systematic review of the potential upgrading strategy of vegetable fermentation technology. First, we disclose the microbial community structures and succession rules in some typical spontaneously fermented vegetables to comprehend the microbial fermentation processes well. Then, internal and external factors affecting microorganisms are explored to provide references for the selection of fermented materials and conditions. Besides, we widely summarize the potential starter candidates with various characteristics isolated from spontaneously fermented products. Subsequently, we exhibited the inoculated fermentation strategies with those isolations. To optimize the product quality, not only lactic acid bacteria that lead the fermentation, but also yeasts that contribute to aroma formation should be combined for inoculation. The inoculation order of the starter cultures also affects the microbial fermentation. It is equally important to choose a proper processing method to guarantee the activity and convenience of starter cultures. Only in this way can we achieve the transition from traditional spontaneous fermentation to modern inoculated fermentation.

SASEGAN-TCN: Speech enhancement algorithm based on self-attention generative adversarial network and temporal convolutional network.

Traditional unsupervised speech enhancement models often have problems such as non-aggregation of input feature information, which will introduce additional noise during training, thereby reducing the quality of the speech signal. In order to solve the above problems, this paper analyzed the impact of problems such as non-aggregation of input speech feature information on its performance. Moreover, this article introduced a temporal convolutional neural network and proposed a SASEGAN-TCN speech enhancement model, which captured local features information and aggregated global feature information to improve model effect and training stability. The simulation experiment results showed that the model can achieve 2.1636 and 92.78% in perceptual evaluation of speech quality (PESQ) score and short-time objective intelligibility (STOI) on the Valentini dataset, and can accordingly reach 1.8077 and 83.54% on the THCHS30 dataset. In addition, this article used the enhanced speech data for the acoustic model to verify the recognition accuracy. The speech recognition error rate was reduced by 17.4%, which was a significant improvement compared to the baseline model experimental results.

3D Lightweight Interconnected Melamine Foam Modified with Hollow CoFe2O4/MXene toward Efficient Microwave Absorption.

Considering the increasing severity of electromagnetic wave pollution, the development of high-performance low-filler-content microwave absorbers possessing wide frequency bands and strong absorption for practical applications is a demanding research hotspot. In this study, from the perspectives of the electromagnetic component coordination and structural design, a three-dimensional (3D) interconnected CoFe2O4/MXene-melamine foam (MF) was constructed via simple impregnation and a single freeze-drying step. By changing the absorber (CoFe2O4/MXene) concentration, the pore opening and electromagnetic properties of the 3D foams can be effectively adjusted. When the absorber concentration is sufficiently high to clog the internal pores, the microwave absorption is hindered. When the filler (CoFe2O4/MXene-MF) content is just ∼5.8 wt % (at a density of ∼33.3 mg cm-3), a minimum reflection loss (RLmin) of -72.1 dB is achieved at a matching thickness of 3.32 mm, and an effective absorption bandwidth (4.54 GHz) covering the whole X band is achieved at a thickness of 3 mm. CoFe2O4/MXene-MF, which possesses a 3D porous electromagnetic network structure, optimizes impedance matching and enhances multiple polarization relaxations and reflections/scattering, resulting in superior absorption capabilities. In particular, the continuous network structure ensures the uniform distribution of electromagnetic fields in the microstructure, achieving high absorption at low filler contents. This work provides a reference for subsequent 3D absorber concentration studies and a novel engineering strategy for preparing a low-filler-content, lightweight, and efficient electromagnetic wave absorber, which could be applied in the fields of radar security and information communications.

Controlled SPION-Exosomes Loaded with Quercetin Preserves Pancreatic Beta Cell Survival and Function in Type 2 Diabetes Mellitus.

Introduction: Quercetin has an ideal therapeutic effect on islet function improvement in type 2 diabetes mellitus (T2DM). However, the therapeutic benefit of quercetin is hindered by its poor bioavailability and limited concentration in pancreatic islets. In this study, superparamagnetic iron oxide nanoparticle (SPION)-modified exosomes were prepared to load quercetin, hoping to endow quercetin with enhanced water solubility and active targeting capacity with the help of magnetic force (MF). Methods: Transferrin-modified SPIONs (Tf-SPIONs) were synthesized by exploiting N-hydroxysuccinimidyl (NHS) conjugation chemistry, and quercetin-loaded exosomes (Qu-exosomes) were acquired by electroporation. Tf-SPION-modified quercetin-loaded exosomes (Qu-exosome-SPIONs) were generated by the self-assembly of transferrin (Tf) and the transferrin receptor (TfR). The solubility of quercetin was determined by high-performance liquid chromatography (HPLC) analysis. The pancreatic islet targeting capacity and insulin secretagogue and antiapoptotic activities of Qu-exosome-SPIONs/MF were evaluated both in vitro and in vivo. Results: The Qu-exosome-SPIONs were well constructed and harvested by magnetic separation with a uniform size and shape in a diameter of approximately 86.2 nm. The water solubility of quercetin increased 1.97-fold when loaded into the SPION-modified exosomes. The application of SPIONs/MF endowed the Qu-exosomes with favorable targeting capacity. In vitro studies showed that Qu-exosome-SPIONs/MF more effectively inhibited or attenuated ß cell apoptosis and promoted insulin secretion in response to elevated glucose (GLC) compared with quercetin or Qu-exosome-SPIONs. In vivo studies demonstrated that Qu-exosome-SPIONs/MF displayed an ideal pancreatic islet targeting capacity, thereby leading to the restoration of islet function. Conclusion: The Qu-exosome-SPIONs/MF nano-delivery system significantly enhanced the quercetin concentration in pancreatic islets and thereby improved pancreatic islet protection.

Analyzing the pressure resistant, sublethal injury and resuscitable viable but non-culturable state population of Escherichia coli, Staphylococcus aureus, Bacillus amyloliquefaciens and Lactiplantibacillus plantarum under high pressure processing.

This study aimed to analyze and reduce the pressure resistance (PR), sublethal injury (SLI), and viable but non-culturable (VBNC) populations during HPP. Escherichia coli, Staphylococcus aureus, Bacillus amyloliquefaciens and Lactiplantibacillus plantarum were selected for evaluation of PR, SLI and VBNC cell counts and proportions during HPP. The results revealed that the bactericidal efficiency against these strains gradually improved as the processing pressure increased. However, viable bacteria could still be detected, suggesting that there may involve the presence of resistant population that difficult to be killed or revived from SLI. Further detecting the quantity and proportion of PR, SLI and VBNC bacteria found that these state of cells were present during whole HPP treatment. Additionally, the more resistant a bacterial species was to high pressure, the fewer SLI and more resuscitable VBNC (RVBNC) populations it generated, and vice versa. Therefore, correlation analysis was also employed to make the relationship between log reduction, SLI and RVBNC population ratios clearer. The results demonstrated that the log reduction was highly positive correlation with SLI population ratios, and negative correlation with RVBNC population within our detected species at 500 MPa. Furthermore, CO2 and Nisin were employed to combined with HPP to reduce these survivors. Comparing with 233, 218, 241 and 259 MPa for HPP treatment, it took 37, 89, 135 and 229 MPa for HPP + CO2, and 189, 161, 199 and 292 MPa for HPP + Nisin to the first decimal reduction for E. coli, S.aureus, B. amyloliquefaciens and L. plantarum, respectively. The results indicated that HPP combined with CO2 or Nisin could significantly reduce the quantity of PR, SLI, and RVBNC cells during HPP, and provide better bactericidal effects. In conclusion, we quantified the presence of PR, SLI, and VBNC bacteria after high pressure treatment and investigate the effectiveness of HPP combined with CO2 or Nisin to enhance the inactivation of bacteria and reduce the occurrence of PR, SLI, and RVBNC bacteria.

Effect of high pressure homogenization on the interaction between corn starch and cyanidin-3-O-glucoside.

The effects of high pressure homogenization (HPH) at different pressures (50, 100, 150 and 200 MPa) and temperatures (4, 20, 40, 60 and 80 °C) on the interaction between corn starch (CS) and cyanidin-3-O-glucoside (C3G) were investigated. Based on analyses of zeta potential, attenuated total reflection-flourier transformed infrared spectroscopy and binding rate after adding shielding agents, the main interaction force changed from electrostatic interaction to hydrogen bonds. In comparison, the interaction between CS and C3G exhibited greater strength at low temperatures and pressures. Especially, 4 °C/50 MPa HPH caused the most significant enhancement in binding rate and binding amount, from 9.56 % to 25.16 % and 0.96 µg/mg CS to 2.52 µg/mg CS, respectively. At this condition, the specific surface area of CS-C3G increased from 433.57 ± 0.91 m2/kg to 440.93 ± 1.01 m2/kg. Surface fluorescence reduction was observed by confocal laser scanning microscopy, further X-ray diffraction patterns indicated the retention of partial spatial structure. Therefore, HPH opened the entry channels, increased contact area and preserved steric hindrance, which increased hydrogen bonding sites. At high temperatures and high pressures (> 40 °C, > 100 MPa), the increasing free starch chains provided new hydrogen bonding sites. Overall, HPH was an effective method to enhance the interaction by affecting starch structure.

Resuscitation of viable but nonculturable bacteria promoted by ATP-mediated NAD+ synthesis.

INTRODUCTION: Entry into the viable but nonculturable (VBNC) state is a survival strategy adopted by bacteria to survive harsh environment. Although VBNC cells still have metabolic activity, they lose the ability to form colonies on nonselective culture media. Thus, conventional bacterial detection methods, such as plate counting, are unable to detect the presence of VBNC cells. When the environmental conditions are appropriate, VBNC cells can initiate resuscitation, posing a great risk to the safety of public health. The study of the VBNC resuscitation mechanism could provide new insights into the prevention and control of VBNC resuscitation. OBJECTIVES: Uncovering the molecular mechanism of VBNC cell resuscitation by investigating the role of O-antigen ligase (RfaL) in inhibiting the resuscitation of Escherichia coli O157:H7 in the VBNC state. METHODS: RfaL was screened and verified as a resuscitation inhibitor of VBNC Escherichia coli O157:H7 by detecting resuscitation curve and time-lapse microscopy. The mechanism of RfaL impacts VBNC E. coli resuscitation was investigated by detecting the single cell ATP content, metabolomic changes, NAD(H) content and new protein biosynthesis of WT and ΔrfaL at different stage of resuscitation. RESULTS: Mutation of rfaL, which encoded an O-antigen ligase, markedly shortened the resuscitating lag phase. Further studies indicated that ΔrfaL VBNC cells contained higher ATP levels, and ATP consumption during the resuscitating lag phase was highly correlated with resuscitation efficiency. Metabolomic analysis revealed that ATP was utilized to activate the Handler and salvage pathways to synthesize NAD+, balancing redox reactions to recover cell activity and promote cell resuscitation. CONCLUSION: Our findings revealed a strategy employed by VBNC cells for revival, that is, using residual ATP to primarily recover metabolic activity, driving cells to exit dormancy. The synthesis pathway of lipopolysaccharide (LPS) in rfaL null mutant was inhibited and could supply more ATP to synthesis NAD+ and promote resuscitation.

Generation, utilization, and environmental impact of ladle furnace slag: A minor review.

More than 20 million tons of ladle furnace slag are produced annually. This slag is mainly treated by stockpiling; however, stacking results in dust and heavy metal pollution. Utilizing this slag as a resource can reduce primary resource consumption and eliminate pollution. In this review, existing studies and practices related to slag are discussed, and applications for different slag types are analyzed. The findings reveal that under alkali- or gypsum-activated conditions, CaO-SiO2-MgO, CaO-Al2O3-MgO, and CaO-SiO2-Al2O3-MgO slags may act as a low-strength binder, a garnet- or ettringite-based binder, and a high-strength cementitious material, respectively. Partial replacement of cement with CaO-Al2O3-MgO or CaO-SiO2-Al2O3-MgO slag can adjust the settling time. Meanwhile, CaO-SiO2-Al2O3-FeO-MgO slag combined with fly ash can be used to prepare a high-strength geopolymer, and CaO-Al2O3-MgO and CaO-SiO2-MgO slags may yield high carbon dioxide sequestration percentages. However, the aforementioned applications could lead to secondary pollution because these slags contain heavy metals and sulfur. Removing them or suppressing their dissolution is therefore of significant interest. Reusing hot slag in a ladle furnace could be an efficient utilization strategy because it can recover heat energy while utilizing the components of the hot slag. However, adopting this approach necessitates the further development of an efficient method for removing sulfur from hot slag. Overall, this review elucidates the relationship between the utilization method and slag type and identifies future research directions, thereby providing references and guidance for future research on slag utilization.

Urchin-like Fe3O4@C hollow spheres with core-shell structure: Controllable synthesis and microwave absorption.

The steadily increasing use of microwave stealth materials in aerospace flying vehicles needs the development of lightweight absorbers with low density and high thermal stability for printing or spraying. In that regard, the structural designability of typical microwave absorbers made of Fe3O4 seems to be a significant roadmap. In this work, a hollow spherical structure with a uniform carbon shell around the urchin-like Fe3O4 core (Fe3O4@C) was produced via a two-step hydrothermal method and annealing. The Fe3O4@C absorber exhibited a strong minimum reflection loss (RLmin) of -73.5 dB at the matching thickness of 3.23 mm. The maximum effective absorption bandwidth (EABmax) was 4.78 GHz at 4.55 mm. The proposed urchin-like core-shell structure was shown to provide good impedance matching and electromagnetic loss ability due to the synergistic effect of Fe3O4 and C. In particular, the urchin-like structure increases the heterogeneous interfaces and effectively improves their polarization and relaxation. On the other hand, it reduces the density of the absorber and enhances multiple scattering attenuations of electromagnetic waves (EMWs). Therefore, the findings of the present study open up prospects for the design of high-efficiency lightweight microwave absorbers with specialized structures.

The underlying mechanism of bacterial spore germination: An update review.

Bacterial spores are highly resilient and universally present on earth and can irreversibly enter the food chain to cause food spoilage or foodborne illness once revived to resume vegetative growth. Traditionally, extensive thermal processing has been employed to efficiently kill spores; however, the relatively high thermal load adversely affects food quality attributes. In recent years, the germination-inactivation strategy has been developed to mildly kill spores based on the circumstance that germination can decrease spore-resilient properties. However, the failure to induce all spores to geminate, mainly owing to the heterogeneous germination behavior of spores, hampers the success of applying this strategy in the food industry. Undoubtedly, elucidating the detailed germination pathway and underlying mechanism can fill the gap in our understanding of germination heterogeneity, thereby facilitating the development of full-scale germination regimes to mildly kill spores. In this review, we comprehensively discuss the mechanisms of spore germination of Bacillus and Clostridium species, and update the molecular basis of the early germination events, for example, the activation of germination receptors, ion release, Ca-DPA release, and molecular events, combined with the latest research evidence. Moreover, high hydrostatic pressure (HHP), an advanced non-thermal food processing technology, can also trigger spore germination, providing a basis for the application of a germination-inactivation strategy in HHP processing. Here, we also summarize the diverse germination behaviors and mechanisms of spores of Bacillus and Clostridium species under HHP, with the aim of facilitating HHP as a mild processing technology with possible applications in food sterilization. Practical Application: This work provides fundamental basis for developing efficient killing strategies of bacterial spores in food industry.

Effect of preliminary stresses on the induction of viable but non-culturable Escherichia coli O157:H7 NCTC 12900 and Staphylococcus aureus ATCC 6538.

As a novel non-thermal pasteurization technology, high pressure carbon dioxide (HPCD) has been used in food processing. However, it could induce microorganisms into a viable but nonculturable (VBNC) state, posing a potential risk to food safety and public health. In this study, we attempted to investigate the effect of various preliminary stresses including cold, heat, osmosis, acidity and oxidation on HPCD-induced VBNC formation. The results indicated that there was no effect of preliminary stresses on VBNC Staphylococcus aureus induction. However, heat, acidity and long-term (24 h) cultivation preadaptation could significantly increase the VBNC E. coli production induced by HPCD. Transcriptome analysis revealed that genes involved in ATP production were significantly decreased in these three stress-treated cells, and further ATP levels determination revealed that the ATP levels of the cell were significantly decreased after heat, acidity and long-term cultivation preadaptation, implying the decrease of ATP level caused by these stresses might be the reason for increasing VBNC production. To further study the relationship between ATP level and VBNC cell ratios after preadaptation. We artificially decreased the ATP levels, and detect their VBNC ratios after HPCD treatment. We found that with the ATP concentration decreasing after exposure to carbonyl cyanide m-chlorophenyl hydrazine (CCCP), the VBNC ratios were increased after HPCD treatment, indicating that the ATP contents were highly negatively correlated with VBNC ratios. This study proved that the preadaptation of heat, acidity and long-term cultivation could promote VBNC induction by decreasing the intracellular ATP level. In general, the obtained result gave the instruction about the storage environment for food materials, helped to further develop and optimize the HPCD processing to prevent VBNC formation and accelerate the development of HPCD technology in food industry.

Influence of pressurization rate and mode on cell damage of Escherichia coli and Staphyloccocus aureus by high hydrostatic pressure.

As a non-thermal technology, high hydrostatic pressure (HHP) has been widely investigated for inactivating microorganisms in food. Few studies have been presented on the pressurization/depressurization rate and mode of microbial inactivation. In this study, effect of pressurization rate and mode on Escherichia coli and Staphylococcus aureus cell damage during HHP treatment was investigated. The results showed that fast pressurization + linear mode (FL) treatment has the best bactericidal effect on E. coli and S. aureus, followed by fast pressurization + stepwise mode (FS) and slow pressurization + stepwise mode (SS) treatments. FL treatment caused more morphological damage to the cell wall, cell membrane, and cytoplasmic components compared with FS and SS treatment detected by SEM and TEM. Additionally, the damage to membrane permeability of them was also enhanced after FL treatment. Therefore, our results indicated that FL treatment could be applied to enhance the bactericidal effect of HHP on bacteria by increasing the damage to cell morphological structure and membrane integrity.

Development of an HPLC-PDA Method for the Determination of Capsanthin, Zeaxanthin, Lutein, ß-Cryptoxanthin and ß-Carotene Simultaneously in Chili Peppers and Products.

For the better standardization and widespread application of the determination method of carotenoids in both chili peppers and their products, this work reports for the first time the simultaneous determination of five main carotenoids, including capsanthin, zeaxanthin, lutein, ß-cryptoxanthin and ß-carotene in chili peppers and their products, with optimized extraction and the high-performance liquid chromatography (HPLC) method. All parameters in the methodological evaluation were found to be in good stability, recovery and accuracy compliance with the reference values; the R coefficients for the calibration curves were more than 0.998; and the LODs and LOQs varied from 0.020 to 0.063 and from 0.067 to 0.209 mg/L, respectively. The characterization of five carotenoids in chili peppers and their products passed all the required validation criteria. The method was applied in the determination of carotenoids in nine fresh chili peppers and seven chili pepper products.

Acid shock protein Asr induces protein aggregation to promote E. coli O157:H7 entering viable but non-culturable state under high pressure carbon dioxide stress.

Under stressful conditions, bacteria can enter viable but non-culturable (VBNC) state to survive. VBNC cells lost ability to grow on routine culture medium but are still alive and may revive in suitable conditions. The revived cells can consume nutrients or produce toxins, leading to food spoilage or human illness, posing great risk to food safety and public health. Previously, we have reported that high pressure carbon dioxide (HPCD), an environment-friendly sterilization technology, can induce VBNC formation. However, the underlying mechanism is unclear. By performing a comprehensive transcriptomic analysis, we revealed that HPCD initiated high expression of asr, encoding an acid shock protein, could promote VBNC formation of E. coli O157:H7. Quantitative reverse transcription PCR analysis suggested that high expression of asr (i) inhibited acid resistance (AR) systems, resulting in endogenous proton accumulation; (ii) inhibited hchA expression, a protein stabilizing factor. The two effects resulted in endogenous protein aggregation, which was highly correlated to VBNC formation. Accordingly, HPCD-stressed cells exhibited decreased efficiency of electron transfer chain and ATP production, which was also contributory to cytoplasmic protein aggregation. Taken together, HPCD-initiated high expression of Asr coupled with decreased ATP production led to protein aggregation, finally promoted the cells to enter VBNC state.

Investigating the microbial inactivation effect of low temperature high pressure carbon dioxide and its application in frozen prawn (Penaeus vannamei).

During the pandemic of coronavirus disease 2019, the fact that frozen foods can carry the relevant virus raises concerns about the microbial safety of cold-chain foods. As a non-thermal processing technology, high pressure carbon dioxide (HPCD) is a potential method to reduce microbial load on cold-chain foods. In this study, we explored the microbial inactivation of low temperature (5-10 °C) HPCD (LT-HPCD) and evaluated its effect on the quality of prawn during freeze-chilled and frozen storage. LT-HPCD treatment at 6.5 MPa and 10 °C for 15 min could effectively inactivate E. coli (99.45%) and S. aureus (94.6%) suspended in 0.85% NaCl, SARS-CoV-2 Spike pseudovirus (>99%) and human coronavirus 229E (hCoV-229E) (>1-log virus tilter reduction) suspended in DMEM medium. The inactivation effect of LT-HPCD was weakened but still significant when the microorganisms were inoculated on the surface of food or package. LT-HPCD treatment at 6.5 MPa and 10 °C for 15 min achieved about 60% inactivation of total aerobic count while could maintain frozen state and quality of prawn. Moreover, LT-HPCD treated prawn exhibited significant slower microbial proliferation and no occurrence of melanosis compared with the untreated samples during chilled storage. A comprehensive quality investigation indicated that LT-HPCD treatment could maintain the color, texture and sensory of prawn during chilled or frozen storage. Consequently, LT-HPCD could improve the microbial safety of frozen prawn while maintaining its original quality, and could be a potential method for food industry to improve the microbial safety of cold-chain foods.

Glutamate catabolism during sporulation determines the success of the future spore germination.

Bacterial spores can preserve cellular dormancy for years, but still hold the remarkable ability to revive and recommence life. This cellular awakening begins with a rapid and irreversible event termed germination; however, the metabolic determinants required for its success have been hardly explored. Here, we show that at the onset of the process of sporulation, the metabolic enzyme RocG catabolizes glutamate, facilitating ATP production in the spore progenitor cell, and subsequently influencing the eventual spore ATP reservoir. Mutants displaying low RocG levels generate low ATP-containing spores that exhibit severe germination deficiency. Importantly, this phenotype could be complemented by expressing RocG at a specific window of time during the initiation of sporulation. Thus, we propose that despite its low abundance in dormant spores, ATP energizes spore germination, and its production, fueled by RocG, is coupled with the initial developmental phase of spore formation.

Effect of high hydrostatic pressure processing on the structure, functionality, and nutritional properties of food proteins: A review.

Proteins are important food ingredients that possess both functional and nutritional properties. High hydrostatic pressure (HHP) is an emerging nonthermal food processing technology that has been subject to great advancements in the last two decades. It is well established that pressure can induce changes in protein folding and oligomerization, and consequently, HHP has the potential to modify the desired protein properties. In this review article, the research progress over the last 15 years regarding the effect of HHP on protein structures, as well as the applications of HHP in modifying protein functionalities (i.e., solubility, water/oil holding capacity, emulsification, foaming and gelation) and nutritional properties (i.e., digestibility and bioactivity) are systematically discussed. Protein unfolding generally occurs during HHP treatment, which can result in increased conformational flexibility and the exposure of interior residues. Through the optimization of HHP and environmental conditions, a balance in protein hydrophobicity and hydrophilicity may be obtained, and therefore, the desired protein functionality can be improved. Moreover, after HHP treatment, there might be greater accessibility of the interior residues to digestive enzymes or the altered conformation of specific active sites, which may lead to modified nutritional properties. However, the practical applications of HHP in developing functional protein ingredients are underutilized and require more research concerning the impact of other food components or additives during HHP treatment. Furthermore, possible negative impacts on nutritional properties of proteins and other compounds must be also considered.