Molecular dynamics study of T = 3 capsid assembly.

Molecular dynamics simulation is used to model the self-assembly of polyhedral shells containing 180 trapezoidal particles that correspond to the T = 3 virus capsid. Three kinds of particle, differing only slightly in shape, are used to account for the effect of quasi-equivalence. Bond formation between particles is reversible and an explicit atomistic solvent is included. Under suitable conditions the simulations are able to produce complete shells, with the majority of unused particles remaining as monomers, and practically no other clusters. There are also no incorrectly assembled clusters. The simulations reveal details of intermediate structures along the growth pathway, information that is relevant for interpreting experiment.

Packaging stiff polymers in small containers: A molecular dynamics study.

The question of how stiff polymers are able to pack into small containers is particularly relevant to the study of DNA packaging in viruses. A reduced version of the problem based on coarse-grained representations of the main components of the system-the DNA polymer and the spherical viral capsid-has been studied by molecular dynamics simulation. The results, involving longer polymers than in earlier work, show that as polymers become more rigid there is an increasing tendency to self-organize as spools that wrap from the inside out, rather than the inverse direction seen previously. In the final state, a substantial part of the polymer is packed into one or more coaxial spools, concentrically layered with different orientations, a form of packaging achievable without twisting the polymer.

Molecular dynamics simulation: a tool for exploration and discovery using simple models.

Emergent phenomena share the fascinating property of not being obvious consequences of the design of the system in which they appear. This characteristic is no less relevant when attempting to simulate such phenomena, given that the outcome is not always a foregone conclusion. The present survey focuses on several simple model systems that exhibit surprisingly rich emergent behavior, all studied by molecular dynamics (MD) simulation.The examples are taken from the disparate fields of fluid dynamics, granular matter and supramolecular self-assembly. In studies of fluids modeled at the detailed microscopic level using discrete particles, the simulations demonstrate that complex hydrodynamic phenomena in rotating and convecting fluids­the Taylor­Couette and Rayleigh­Bénard instabilities­cannot only be observed within the limited length and time scales accessible to MD, but even allow quantitative agreement to be achieved. Simulation of highly counter-intuitive segregation phenomena in granular mixtures, again using MD methods, but now augmented by forces producing damping and friction, leads to results that resemble experimentally observed axial and radial segregation in the case of a rotating cylinder and to a novel form of horizontal segregation in a vertically vibrated layer. Finally, when modeling self-assembly processes analogous to the formation of the polyhedral shells that package spherical viruses, simulation of suitably shaped particles reveals the ability to produce complete, error-free assembly and leads to the important general observation that reversible growth steps contribute to the high yield. While there are limitations to the MD approach, both computational and conceptual, the results offer a tantalizing hint of the kinds of phenomena that can be explored and what might be discovered when sufficient resources are brought to bear on a problem.

Mitochondrial proteolytic stress induced by loss of mortalin function is rescued by Parkin and PINK1.

The mitochondrial chaperone mortalin was implicated in Parkinson's disease (PD) because of its reduced levels in the brains of PD patients and disease-associated rare genetic variants that failed to rescue impaired mitochondrial integrity in cellular knockdown models. To uncover the molecular mechanisms underlying mortalin-related neurodegeneration, we dissected the cellular surveillance mechanisms related to mitochondrial quality control, defined the effects of reduced mortalin function at the molecular and cellular levels and investigated the functional interaction of mortalin with Parkin and PINK1, two PD-related proteins involved in mitochondrial homeostasis. We found that reduced mortalin function leads to: (1) activation of the mitochondrial unfolded protein response (UPR(mt)), (2) increased susceptibility towards intramitochondrial proteolytic stress, (3) increased autophagic degradation of fragmented mitochondria and (4) reduced mitochondrial mass in human cells in vitro and ex vivo. These alterations caused increased vulnerability toward apoptotic cell death. Proteotoxic perturbations induced by either partial loss of mortalin or chemical induction were rescued by complementation with native mortalin, but not disease-associated mortalin variants, and were independent of the integrity of autophagic pathways. However, Parkin and PINK1 rescued loss of mortalin phenotypes via increased lysosomal-mediated mitochondrial clearance and required intact autophagic machinery. Our results on loss of mortalin function reveal a direct link between impaired mitochondrial proteostasis, UPR(mt) and PD and show that effective removal of dysfunctional mitochondria via either genetic (PINK1 and Parkin overexpression) or pharmacological intervention (rapamycin) may compensate mitochondrial phenotypes.

Molecular dynamics simulation of reversibly self-assembling shells in solution using trapezoidal particles.

The self-assembly of polyhedral shells, each constructed from 60 trapezoidal particles, is simulated using molecular dynamics. The spatial organization of the component particles in this shell is similar to the capsomer proteins forming the capsid of a T=1 virus. Growth occurs in the presence of an atomistic solvent and, under suitable conditions, achieves a high yield of complete shells. The simulations provide details of the structure and lifetime of the particle clusters that appear as intermediate states along the growth pathway, and the nature of the transitions between them. In certain respects the growth of size-60 shells from trapezoidal particles resembles the growth of icosahedral shells from triangular particles studied previously, with reversible bonding playing a major role in avoiding incorrect assembly, although the details differ due to particle shape and bond organization. The strong preference for maximal bonding exhibited by the triangular particle clusters is also apparent for trapezoidal particles, but this is now confined to early growth and is less pronounced as shells approach completion along a variety of pathways.

Structure and interactions in fluids of prolate colloidal ellipsoids: comparison between experiment, theory, and simulation.

The microscopic structure of fluids of simple spheres is well known. However, the constituents of most real-life fluids are non-spherical, leading to a coupling between the rotational and translational degrees of freedom. The structure of simple dense fluids of spheroids - ellipsoids of revolution - was only recently determined by direct experimental techniques [A. P. Cohen, E. Janai, E. Mogilko, A. B. Schofield, and E. Sloutskin, Phys. Rev. Lett. 107, 238301 (2011)]. Using confocal microscopy, it was demonstrated that the structure of these simple fluids cannot be described by hard particle models based on the widely used Percus-Yevick approximation. In this paper, we describe a new protocol for determining the shape of the experimental spheroids, which allows us to expand our previous microscopy measurements of these fluids. To avoid the approximations in the theoretical approach, we have also used molecular dynamics simulations to reproduce the experimental radial distribution functions g(r) and estimate the contribution of charge effects to the interactions. Accounting for these charge effects within the Percus-Yevick framework leads to similar agreement with the experiment.

CEDNIK syndrome results from loss-of-function mutations in SNAP29.

BACKGROUND: CEDNIK (cerebral dysgenesis, neuropathy, ichthyosis and keratoderma) syndrome is a rare genodermatosis which was shown 5 years ago in one family to be associated with a loss-of-function mutation in SNAP29, encoding a member of the SNARE family of proteins. Decrease in SNAP29 expression was found to result in abnormal lamellar granule maturation leading to aberrant epidermal differentiation and ichthyosis. OBJECTIVES: To delineate the molecular consequences of disease-causing mutations in SNAP29. METHODS: We used direct sequencing, in vitro mutagenesis and three-dimensional organotypic cell cultures. RESULTS: We identified a novel homozygous insertion in SNAP29 (c.486insA) in two sibs presenting with ichthyosis and dysgenesis of the corpus callosum. In vitro transfection experiments indicated that this mutation results in SNAP29 loss-of-function. Further substantiating this notion, we could replicate histological features typical for CEDNIK syndrome in three-dimensional primary human keratinocyte organotypic cell cultures downregulated for SNAP29. CONCLUSIONS: The identification of a second mutation in SNAP29 in the present study definitely establishes a causal relationship between defective function of SNAP29 and the pleiotropic manifestations of CEDNIK syndrome. Our present and previous data position SNAP29 as an essential component of the epidermal differentiation machinery.

Modeling capsid self-assembly: design and analysis.

A series of simulations aimed at elucidating the self-assembly dynamics of spherical virus capsids is described. This little-understood phenomenon is a fascinating example of the complex processes that occur in the simplest of organisms. The fact that different viruses adopt similar structural forms is an indication of a common underlying design, motivating the use of simplified, low-resolution models in exploring the assembly process. Several versions of a molecular dynamics approach are described. Polyhedral shells of different sizes are involved, the assembly pathways are either irreversible or reversible and an explicit solvent is optionally included. Model design, simulation methodology and analysis techniques are discussed. The analysis focuses on the growth pathways and the nature of the intermediate states, properties that are hard to access experimentally. Among the key observations are that efficient growth proceeds by means of a cascade of highly reversible stages, and that while there are a large variety of possible partial assemblies, only a relatively small number of strongly bonded configurations are actually encountered.

Studies of reversible capsid shell growth.

Results from molecular dynamics simulations of simple, structured particles capable of self-assembling into polyhedral shells are described. The analysis focuses on the growth histories of individual shells in the presence of an explicit solvent and the nature of the events along their growth pathways; the results provide further evidence of the importance of reversibility in the assembly process. The underlying goal of this approach is the modeling of virus capsid growth, a phenomenon at the submicroscopic scale that, despite its importance, is little understood.

Simulational nanoengineering: Molecular dynamics implementation of an atomistic Stirling engine.

A nanoscale-sized Stirling engine with an atomistic working fluid has been modeled using molecular dynamics simulation. The design includes heat exchangers based on thermostats, pistons attached to a flywheel under load, and a regenerator. Key aspects of the behavior, including the time-dependent flows, are described. The model is shown to be capable of stable operation while producing net work at a moderate level of efficiency.

Role of reversibility in viral capsid growth: a paradigm for self-assembly.

Self-assembly at submicroscopic scales is an important but little understood phenomenon. A prominent example is virus capsid growth, whose underlying behavior can be modeled using simple particles that assemble into polyhedral shells. Molecular dynamics simulation of shell formation in the presence of an atomistic solvent provides new insight into the self-assembly mechanism, notably that growth proceeds via a cascade of strongly reversible steps and, despite the large variety of possible intermediates, only a small fraction of highly bonded forms appear on the pathway.

Simulated three-component granular segregation in a rotating drum.

Discrete particle simulations are used to model segregation in granular mixtures of three different particle species in a horizontal rotating drum. Axial band formation is observed, with medium-size particles tending to be located between alternating bands of big and small particles. Partial radial segregation also appears; it precedes the axial segregation and is characterized by an inner core region richer in small particles. Axial bands are seen to merge during the long simulation runs, leading to a coarsening of the band pattern; the relocation of particles involved in one such merging event is examined. Overall, the behavior is similar to experiment and represents a generalization of what occurs in the simpler two-component mixture.

Radial and axial segregation of granular matter in a rotating cylinder: a simulation study.

The phenomena of radial and axial segregation in a horizontal rotating cylinder containing a mixture of granular particles of two different species have been modeled using discrete particle simulation. Space-time plots and detailed imagery provide a comprehensive description of what occurs in the system. As is the case experimentally, the nature of the segregation depends on the parameters defining the problem; the radial component of the segregation may be transient or long lasting, and the axial component may or may not develop. Simulations displaying the different kinds of behavior are described and the particle dynamics associated with the axially segregated state examined. The importance of an appropriate choice of interaction for representing the effective friction force is demonstrated.

Microscale swimming: the molecular dynamics approach.

The self-propelled motion of microscopic bodies immersed in a fluid medium is studied using molecular dynamics simulation. The advantage of the atomistic approach is that the detailed level of description allows complete freedom in specifying the swimmer design and its coupling with the surrounding fluid. A series of two-dimensional swimming bodies employing a variety of propulsion mechanisms-motivated by biological and microrobotic designs-is investigated, including the use of moving limbs, changing body shapes, and fluid jets. The swimming efficiency and the nature of the induced, time-dependent flow fields are found to differ widely among body designs and propulsion mechanisms.

Hexagonal convection patterns in atomistically simulated fluids.

Molecular dynamics simulation has been used to model pattern formation in three-dimensional Rayleigh-Bénard convection at the discrete-particle level. Two examples are considered, one in which an almost perfect array of hexagonally shaped convection rolls appears, the other a much narrower system that forms a set of linear rolls; both pattern types are familiar from experiment. The nature of the flow within the convection cells and quantitative aspects of the development of the hexagonal planform based on automated polygon subdivision are analyzed. Despite the microscopic scale of the system, relatively large simulations with several million particles and integration time steps are involved.

Self-assembly of polyhedral shells: a molecular dynamics study.

The use of reduced models for investigating the self-assembly dynamics underlying protein shell formation in spherical viruses is described. The spontaneous self-assembly of these polyhedral, supramolecular structures, in which icosahedral symmetry is a conspicuous feature, is a phenomenon whose dynamics remain unexplored; studying the growth process by means of computer simulation provides access to the mechanisms underlying assembly. In order to capture the more universal aspects of self-assembly, namely the manner in which component shapes influence structure and assembly pathway, in this exploratory study low-resolution approximations are used to represent the basic protein building blocks. Alternative approaches involving both irreversible and reversible assembly are discussed, models based on both schemes are introduced, and examples of the resulting behavior described.

Dynamics of polymer chain collapse into compact states.

Molecular dynamics simulation methods are used to study the folding of polymer chains into packed cubic states. The polymer model, based on a chain of linked sites moving in the continuum, includes both excluded volume and torsional interactions. Different native-state packing arrangements and chain lengths are explored; the organization of the native state is found to affect both the ability of the chain to fold successfully and the nature of the folding pathway as the system is gradually cooled. An order parameter based on contact counts is used to provide information about the folding process, with contacts additionally classified according to criteria such as core and surface sites or local and distant site pairs. Fully detailed contact maps and their evolution are also examined.

Molecular dynamics simulation of polymer helix formation using rigid-link methods.

Molecular dynamics simulations are used to study structure formation in simple model polymer chains that are subject to excluded volume and torsional interactions. The changing conformations exhibited by chains of different lengths under gradual cooling are followed until each reaches a state from which no further change is possible. The interactions are chosen so that the true ground state is a helix, and a high proportion of simulation runs succeed in reaching this state; the fraction that manages to form defect-free helices is a function of both chain length and cooling rate. In order to demonstrate behavior analogous to the formation of protein tertiary structure, additional attractive interactions are introduced into the model, leading to the appearance of aligned, antiparallel helix pairs. The simulations employ a computational approach that deals directly with the internal coordinates in a recursive manner; this representation is able to maintain constant bond lengths and angles without the necessity of treating them as an algebraic constraint problem supplementary to the equations of motion.

Simulational studies of axial granular segregation in a rotating cylinder.

Discrete particle simulation methods have been used to study axial segregation in a horizontal rotating cylinder that is partially filled with a mixture of two different kinds of granular particles. Under suitable conditions segregation was found to occur, with the particles separating into a series of bands perpendicular to the axis. In certain cases the band structure exhibited time-dependent behavior, including band formation, merging and motion along the axis, all corresponding to phenomena that arise experimentally. In order to examine how the many parameters specifying the problem affect the segregation process, simulation runs were carried out using a variety of parameter settings, including combinations of friction coefficients not realizable experimentally. Both segregation and desegregation (mixing) were investigated, and cylinders with both explicit end caps and periodic ends were used to help isolate the causes of segregation.

Antiviral prophylaxis may prevent human herpesvirus-6 reactivation in bone marrow transplant recipients.

Human herpesvirus-6 (HHV-6) infects the majority of children under the age of 2 years causing roseola infantum. Following short self-limited disease, the virus enters into a latency phase in peripheral blood lymphocytes (PBL). It has been previously reported that HHV-6 reactivation from latency, in immunocompromised patients undergoing bone marrow transplantation (BMT), could result in febrile illness, pneumonitis, meningitis, and/or encephalitis. In our study, 14 BMT patients received two different antiviral prophylactic therapies: 8 patients received acyclovir, whereas 6 patients received ganciclovir. Clinical manifestations and virus recovery were monitored pre- and post-BMT by polymerase chain reaction tests of cord blood cells cultured with the patients' PBL. No HHV-6 recovery was shown in the 6 patients treated with ganciclovir, whereas 3 of the 8 acyclovir-treated patients experienced virus reactivation 20-21 days post-BMT. One of the 3 patients was asymptomatic but had late engraftment; the second patient had prolonged fever, skin rash, and hemorrhage; the third patient experienced prolonged fever, pneumonitis, marrow rejection, and fatal encephalitis. It is concluded that viral reactivation may be prevented by prophylactic treatment with ganciclovir. Our observation awaits further documentation in prospective randomized trials in high-risk BMT recipients.