High-Pressure Pasteurization of Oat Okara.

The issue of the short microbiological shelf life of residues from the plant-based beverage industry creates a large food waste problem. Today, the oat beverage residue, in this study referred to as oat okara, is generally converted to energy or used as animal feed. High-pressure pasteurization (200 MPa, 400 MPa, and 600 MPa) was applied to oat okara to investigate the effect on shelf life and microbiological activity. A 4-week microbiological storage study was performed and thermal properties, viscosity, and water and oil holding capacities were analyzed. The total aerobic count, including yeast and mold, was significantly reduced (p < 0.05) by 600 MPa after four weeks of storage at 4 °C. The content of lactic acid bacteria after four weeks of storage was low for untreated oat okara (3.2 log CFU/g) but, for 600 MPa, the content remained at the detection limit (2.3 log CFU/g). Conversely, the treatments of 200 MPa and 400 MPa increased the microbial content of the total aerobic count significantly (p < 0.05) after two weeks in comparison to untreated oat okara. The thermal properties of untreated and high-pressure-treated oat okara demonstrated an increase in protein denaturation of the 12S globulin, avenalin, when higher pressure was applied (400-600 MPa). This was also confirmed in the viscosity measurements where a viscosity peak for avenalin was only present for untreated and 200 MPa treated oat okara. The water holding capacity did not change as a function of high-pressure treatment (3.5-3.8 mL/g) except for the treatment at 200 MPa, which was reduced (2.7 mL/g). The oil holding capacity was constant (1.2-1.3 mL/g) after all treatments. High-pressure pasteurization of 600 MPa reduced the microbial content in oat okara resulting in a shelf life of 2-4 weeks. However, more research is required to identify the microorganisms in oat okara to achieve a microbiologically safe product that can be used for food applications.

High-Pressure Pasteurization of Soy Okara.

Okara is a by-product from the production of soy beverages, which has a high content of protein and fiber. Even though it has a high nutritional value, it is generally discarded or used as animal feed or compost. The problem is its short shelf life due to its high water content and high water activity. The aim of this study was to investigate the effect of high-pressure pasteurization at 200 MPa, 400 MPa, and 600 MPa on the shelf life of soy okara. Microbiological growth, as well as thermal properties, viscosity, water holding capacity, and oil holding capacity, was evaluated after the pressure treatments. Treatment at 600 MPa significantly reduced (p < 0.05) the growth of total aerobic count, yeast and mold, and lactic acid bacteria for up to four weeks of storage at 4 °C. The pasting properties were increased while the water and oil holding capacities of the soy okara did not significantly change (p > 0.05) after high-pressure pasteurization at 400 MPa and 600 MPa. High-pressure pasteurization is therefore a potential application technique for soy okara to produce a microbiologically safe product with maintained functional properties. However, more research is needed to optimize the process and to further investigate the microbiological species present in untreated soy okara to exclude any potential food safety risks.

Synthesis of controlled-size starch nanoparticles and superparamagnetic starch nanocomposites by microemulsion method.

In this study, a synthesis process based on the microemulsion method (ME) was developed with the aim to produce controlled-size starch nanoparticles (SNPs). Several formulations were tested for the preparation of the W/O microemulsions varying the organic/aqueous phase ratios and co-stabilizers concentrations. SNPs were characterized in terms of size, morphology, monodispersity and crystallinity. Spherical shape particles with mean sizes 30-40 nm were prepared. The method was then used to simultaneously synthesize SNPs and iron oxide nanoparticles with superparamagnetic properties. Starch-based nanocomposites with superparamagnetic properties and controlled size were obtained. Therefore, the microemulsion method developed could be considered an innovative technology for the design and development of novel functional nanomaterials. The starch-based nanocomposites were evaluated in terms of morphology and magnetic properties, and they are being considered as promising sustainable nanomaterials for different biomedical applications.

Plant-Based Meat Analogues from Alternative Protein: A Systematic Literature Review.

This study aimed to conduct a systematic literature review (SLR) of the research performed in the plant-based meat analogues area. Historical, current, and future tendencies are discussed. The paper offers a comprehensive SLR coupled with a bibliometric analysis of the publication from 1972 to January 2022. The articles were obtained using a research string and precise inclusion and exclusion criteria from two prominent databases, Scopus and Web of Science (WoS). The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) flow technique was used to describe the data screening and selection. In total, 84 publications were selected for further analysis after a thorough literature assessment. From this study, six main themes were identified: (1) objectives of the study; (2) type of plant protein; (3) product type; (4) added ingredients; (5) texturization technique; and (6) quality assessment considered in the studies. Recent trends in publication imply that meat analogue technology is gaining prominence. This review revealed significant research on improving meat analogues via texturization. Even though extrusion is used industrially, the technique is still in its infancy and needs improvement. Future studies should focus more on fiber and protein-protein interactions, macromolecule conformation and mechanisms, diversifying or improving current methods, sensory attributes, and gastrointestinal absorption rate of each novel protein ingredient.

The Effect of Precipitation pH on Protein Recovery Yield and Emulsifying Properties in the Extraction of Protein from Cold-Pressed Rapeseed Press Cake.

Rapeseed is the second most cultivated oilseed after soybean and is mainly used to produce vegetable oil. The by-product rapeseed press cake is rich in high-quality proteins, thus having the possibility of becoming a new plant protein food source. This study aimed to investigate how the precipitation pH affects the protein yield, protein content, and emulsifying properties when industrially cold-pressed rapeseed press cake is used as the starting material. Proteins were extracted under alkaline conditions (pH 10.5) with an extraction coefficient of 52 ± 2% followed by precipitation at various pH (3.0-6.5). The most preferred condition in terms of process efficiency was pH 4.0, which is reflected in the zeta potential results, where the proteins' net charge was 0 at pH 4.2. pH 4.0 also exhibited the highest protein recovery yield (33 ± 0%) and the highest protein concentration (64 ± 1%, dry basis). Proteins precipitated at pH 6.0-6.5 stabilized emulsions with the smallest initial droplet size, although emulsions stabilized by rapeseed protein precipitated at pH 5.0-6.0 showed the highest emulsion stability at 37 °C for 21 days, with a limited layer of free oil. Overall, emulsion stabilized by protein precipitated at pH 5.0 was the most stable formulation, with no layer of free oil after 21 days of incubation.

Development and characterization of medium and high internal phase novel multiple Pickering emulsions stabilized by hordein nanoparticles.

Medium and high internal phase W1/O/W2 multiple Pickering emulsions (MPEs) were fabricated by physically-modified hordein nanoparticles. A triphasic system was developed at dispersed phase volume fraction (Φ) of 0.5 with an overrun value of ∼40%. No overrun was detected in high internal phase MPEs (Φ 0.8). Optical and confocal laser scanning microscopy confirmed the formation of MPEs. Monomodal droplet size distribution with a mean diameter of 32.90 and 21.48 µm was observed for MPEs at Φ 0.5 and Φ 0.8, respectively. Static multiple light scattering confirmed that creaming was the main mechanism behind the instability of MPEs. Both MPEs revealed pseudo-plastic behavior and predominant storage modulus (G') over the applied frequency range. The encapsulation efficiency of vitamin B12 in MPEs was 98.3% and remained relatively constant during 28 d. These results suggested the excellent potential of hordein nanoparticles as appropriate candidate for designing multi-structural colloidal systems using plant proteins.

Protein extraction from cold-pressed hempseed press cake: From laboratory to pilot scale.

During the production of industrial hempseed oil, a press cake is formed as a byproduct, which is often used as animal feed although it contains a high amount of protein that could be used for human consumption. Extracting this valuable protein would reduce food waste and increase the availability of plant-based protein. A protein extraction process based on the pH-shift method was adapted to improve the protein extraction yield from industrial hempseed press cake (HPC). Parameters such as alkali extraction pH, time, and temperature, as well as isoelectric precipitation pH, were investigated in laboratory scale and were thereafter carried out in a pilot trial to explore the suitability for future scale up. The phytic acid content of the extracted protein isolate was also analyzed to investigate any potential inhibitory effect on mineral absorption. A final protein yield of 60.6%, with a precipitated protein content of 90.3% (dw), was obtained using a constant alkali extraction pH of 10.5 for 1 h at room temperature, followed by precipitation at pH 5.5. The pilot trial showed promising results for the future production of industrial hemp protein precipitate on a larger scale, showing a protein yield of 57.0% and protein content of 90.8% (dw). The amount of phytic acid in the protein isolate produced in the optimal laboratory experiment and in the pilot trial was 0.595 and 0.557 g phytic acid/100 g dw, respectively, which is 83%-88% less than in the HPC. This is in the range of other plant-based protein sources (tofu, kidney beans, peas, etc.). PRACTICAL APPLICATION: Industrial hempseed press cake is a byproduct in the production of industrial hempseed oil, which is mostly used as animal feed, but has the potential to become an additional source of plant-based protein for human consumption with a suitable protein extraction method. The extracted hemp protein could be used to develop new plant-based dairy or meat analog products.

Development and Characterization of Extrudates Based on Rapeseed and Pea Protein Blends Using High-Moisture Extrusion Cooking.

Rapeseed protein is not currently utilized for food applications, although it has excellent physicochemical, functional, and nutritional properties similar to soy protein. Thus, the goal of this study was to create new plant-based extrudates for application as high-moisture meat analogs from a 50:50 blend of rapeseed protein concentrate (RPC) and yellow pea isolate (YPI) using high-moisture-extrusion (HME) cooking with a twin-screw extruder to gain a better understanding of the properties of the protein powders and resulting extrudates. The effects of extrusion processing parameters such as moisture content (60%, 63%, 65%, 70%), screw speed (500, 700, and 900 rpm), and a barrel temperature profile of 40-80-130-150 °C on the extrudates' characteristics were studied. When compared to the effect of varying screw speeds, targeted moisture content had a larger impact on textural characteristics. The extrudates had a greater hardness at the same moisture content when the screw speed was reduced. The specific mechanical energy (SME) increased as the screw speed increased, while increased moisture content resulted in a small reduction in SME. The lightness (L*) of most samples was found to increase as the target moisture content increased from 60% to 70%. The RPC:YPI blend was equivalent to proteins produced from other sources and comparable to the FAO/WHO standard requirements.

Development of High-Moisture Meat Analogues with Hemp and Soy Protein Using Extrusion Cooking.

The interest in plant-based products is growing in Western countries, mostly due to health and environmental issues that arise from the consumption and production of animal-based food products. Many vegan products today are made from soy, but drawbacks include the challenges of cultivating soy in colder climates such as northern Europe. Therefore, the present study investigates whether industrial hemp (Cannabis sativa) could substitute soy in the production of high moisture meat analogues (HMMA). A twin screw co-rotating extruder was used to investigate to what extent hemp protein concentrate (HPC) could replace soy protein isolate (SPI) in HMMAs. The substitution levels of HPC were 20 wt%, 40 wt% and 60 wt%. Pasting properties and melting temperature of the protein powders were characterized by Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC), respectively and the produced HMMA was analysed by determining the texture and colour attributes. The results showed that it is possible to extrude a mixture with up to 60% HPC. HPC absorbed less water and needed a higher denaturing temperature compared to SPI. Increasing the moisture content by 5% would have resulted in a reduction of hardness and chewiness. The lightness (L* value) was found to be significantly higher in SPI product and decreased in the mixture with higher HPC (p < 0.05).

Emulsifying and Anti-Oxidative Properties of Proteins Extracted from Industrially Cold-Pressed Rapeseed Press-Cake.

One of the functional proteins in rapeseed-the amphiphilic protein oleosin-could be used to stabilize emulsions. The objectives of this study were to extract oleosins from cold-pressed rapeseed press-cake, optimize the extraction process, and investigate their emulsifying and anti-oxidative capacity. The proteins were recovered from industrially cold-pressed rapeseed press-cake at different alkali pHs. Emulsifying properties and oxidation rates were assessed. Oleosin extracted at pH 9 stabilized smaller emulsion droplets than oleosin extracted at pH 12, although the protein yield was higher at pH 12. Emulsions were formulated from flaxseed oil and corn oil and were stabilized by oleosin, bovine serum albumin, de-oiled lecithin and Tween 20,h and the emulsions were stored in accelerated conditions (30 °C) for 12 days. Oleosin stabilized emulsions to the same extent as commercial food-grade emulsifiers. Flaxseed oil emulsions stabilized by oleosin had a significantly lower concentration of malondialdehyde (MDA) which indicates a lower oxidation rate compared to BSA, de-oiled lecithin and Tween 20. For corn oil emulsions, oleosin and BSA had a similar capacity to delay oxidation and were significantly more efficient compared to de-oiled lecithin and Tween 20. Rapeseed oleosin recovered from cold-pressed rapeseed press-cake could be a suitable natural emulsifier with anti-oxidation properties.

Effects of Storage Conditions on Degradation of Chlorophyll and Emulsifying Capacity of Thylakoid Powders Produced by Different Drying Methods.

Thylakoid membranes isolated from spinach have previously been shown to inhibit lipase/co-lipase and prolong satiety in vivo. There is a need to develop thylakoid products that not only have the desired characteristics and functionality after processing, but also are stable and provide equivalent effect on appetite over the promised shelf life. The aim of the present study was therefore to evaluate how the thylakoid powders' characteristics and functionality were affected by moisture during storage. Thylakoids produced by drum-drying, spray-drying, and freeze-drying were incubated in controlled atmosphere with different relative humidity (10 RH%, 32 RH%, 48 RH% and 61 RH%) for 8 months. The water content in all powders was increased during storage. The water absorption was moisture-dependent, and the powders were considered hygroscopic. Relative humidity showed a definite influence on the rate of chlorophyll degradation and loss of green color in thylakoid powders after storage which correlated with impaired emulsifying capacity. Spray-dried powder had the overall highest chlorophyll content and emulsifying capacity at all RH-levels investigated. Spray drying was therefore considered the most suitable drying method yielding a powder with best-maintained functionality after storage. The results can be applied towards quality control of high-quality functional foods with appetite suppressing abilities.

Starch granule stabilized Pickering emulsions: an 8-year stability study.

BACKGROUND: Pickering emulsions are known to have advantages over conventional emulsions, in particular, improved and long-term stability against coalescence. This research is an eight-year stability investigation of oil-in-water Pickering emulsions stabilized by quinoa starch granules modified by octenyl succinic anhydride (OSA). Two different concentrations of starch (i.e. 200 and 600 mg mL-1 based on oil) were used at oil fraction (ϕ) of 0.1. The emulsions were prepared using a high-pressure homogenizer. The emulsions were stored in a refrigerator (at 6 °C) and evaluated using particle size analyzer over the storage period and light microscopy at the end of the storage period. RESULTS: Starch granule stabilized Pickering emulsions produced by a high-pressure homogenizer displayed remarkable storage stability over the eight years with no indication of coalescence. In addition, the results showed that increasing the concentration of starch granules resulted in a decrease in droplet sizes. The sizes measured by the particle size analyzer showed a decline over the storage period which was due to dissociation of some networks of aggregated droplets that, in addition to representing smaller droplet sizes, resulted in the release of free and unbound starch entrapped in these networks. CONCLUSIONS: This study showed that Pickering emulsions produced by OSA modified starch granules from quinoa can be used in practical applications for the development of highly stable formulations when prolonged storage is required. © 2020 Society of Chemical Industry.

Comparison of Three Methods to Determine the Degree of Substitution of Quinoa and Rice Starch Acetates, Propionates, and Butyrates: Direct Stoichiometry, FTIR, and 1H-NMR.

Rice and quinoa starch esters were prepared by acylation using short-chain fatty acid anhydrides with different chain lengths (acetic, propionic, and butyric anhydride). A direct stoichiometric method based on the acylation reaction was used to determine the degree of substitution (DS) and acyl content (AC). In addition, Fourier-transform infrared spectroscopy (FTIR) was used to validate the conformational changes of acylated starch and 1H-NMR was used as a DS reference method. DS by stoichiometric calculation was shown to be in agreement with FTIR and was comparable with DS obtained from Proton nuclear magnetic resonance (1H-NMR). Based on this study, stoichiometric calculation allows rapid and direct determination of substitution levels and acyl content without the loss of samples, which provides efficiency and optimization of manufacturing procedures in producing the desired level of esterified starches.

Protein Recovery from Rapeseed Press Cake: Varietal and Processing Condition Effects on Yield, Emulsifying Capacity and Antioxidant Activity of the Protein Rich Extract.

Protein was recovered from five varieties and a mixed blend of cold-pressed rapeseed press cake by leaching and precipitation in a water-based process, and the protein recovery yield varied from 26-41% depending on variety. Exposure for heat during protein recovery severely reduced the rapeseed proteins' ability to stabilize the oil-water interface of emulsion droplets. Protein extract from Lyside had the best emulsifying properties of the varieties investigated. Oxidation rate was assessed by the Thiobarbituric Acid Reactive Substances (TBARS) method and rapeseed protein extracts from Epure and Festivo had higher capacity to delay oxidation compared with soy lecithin. There are possibilities to broaden the use of rapeseed whereby recovered rapeseed protein can be used as a plant-based multifunctional ingredient with emulsifying capacity and which has a delaying effect on oxidation.

The Effects of Oil Extraction Methods on Recovery Yield and Emulsifying Properties of Proteins from Rapeseed Meal and Press Cake.

The agricultural sector is thought to be responsible for around 30% of the anthropogenic climate change and it is well established that high meat consumption has a tremendous impact on the environment. Rapeseed is mainly used for production of vegetable oil, but press cake has high protein content with the potential for incorporation into new plant protein-based foods. Protein was recovered from press cakes generated from different oil pressing processes. Industrially cold-pressed, hot-pressed, and solvent-extracted rapeseed press cake and the effect of heat treatment in the recovery process was assessed. Protein recovery yield, protein concentration and emulsifying properties were analyzed. Cold-pressed rapeseed press cake (RPC) recovered in the absence of heat, yielded the highest protein recovery (45%) followed by hot-pressed rapeseed meal (RM) (26%) and solvent-extracted RM (5%). Exposure to heat during recovery significantly reduced the yield for cold-pressed RPC but no difference was found for hot-pressed RM. The protein recovery yield was improved for solvent-extracted RM when heat was applied in the recovery process. The ability to stabilize emulsions was highest for protein recovered from cold-pressed RPC, followed by hot-pressed RM and solvent-extracted RM, and was in the same range as commercial emulsifying agents. Heat treatment during recovery significantly reduced the emulsifying properties for all pressing methods examined. This study suggests that cold-pressed rapeseed press cake without heat in the recovery process could be a successful strategy for an efficient recovery of rapeseed protein with good emulsifying properties.

Early and advanced stages of Maillard reaction in infant formulas: Analysis of available lysine and carboxymethyl-lysine.

Although the literature on the Maillard reaction in infant formulas is extensive, most studies have focused on model systems, and in only a few cases on real food systems. Therefore, the objective of the present study was to determine the status of the Maillard reaction, both the early and advanced phases, in a variety of commercial infant formulas available on the Swedish market. Ten powder and liquid milk-based infant formulas from three manufacturers were selected to determine available lysine and CML contents, the two established indicators of the reaction. The products were also characterized with respect to protein content, carbohydrates composition, water content and water activity. In order to be able to compare the impact of different processing steps applied on powder and liquid formulas, the solid formulas contained similar ingredients as their corresponding liquid ones. Our findings showed that powder and liquid formulas contained similar available lysine concentrations regardless of the manufacturer, showing 27.14-36.57% decrease in the available lysine, compared to the reference skim milk powder in this study. The CML concentrations were in a broad range of 68.77-507.99 mg / kg protein. In the case of one manufacturer, liquid infant formulas had significantly higher CML content, compared to the powder products (p < 0.05). The results from this study are a step taken towards better understanding of the extent of the Maillard reaction in real complex systems of infant formulas.

A comparison of emulsion stability for different OSA-modified waxy maize emulsifiers: Granules, dissolved starch, and non-solvent precipitates.

This work investigates the stability of emulsions prepared by using octenyl succinic anhydride (OSA)-modified waxy maize starch in the form of granules, dissolved starch, and non-solvent precipitated starch as Pickering emulsion stabilisers. The aim of this study was to investigate the effects of different forms of starches on the stability of emulsion using light microscopy, light scattering, and static multiple light scattering. All starch samples were hydrophobically modified with 3% (w/w) n-octenyl succinyl anhydride (OSA). Starch polymer solutions were prepared by dissolving OSA- modified starch in water in an autoclave at 140°C. Non-solvent precipitates were obtained through ethanol precipitation of dissolved waxy maize. The stability of the oil/water emulsions were different for the three forms of starches used. The granule-based emulsions were unstable, with only a small proportion of the granules adsorbed onto oil droplets, as viewed under a light microscope. The emulsions were observed to cream after 2 hours. The dissolved starch and non-solvent precipitate-based emulsions were stable towards creaming for months, and they had almost 100% emulsifying index (EI = 1) by visual observation and EI ~ 0.9 by multiple light scattering measurements. The results from light microscopy and multiple light scattering measurements indicated the occurrence of coalescence for all three types of emulsions. The coalescence was fastest within days for the granule stabilised system while it was slower both for the dissolved starch and non-solvent precipitate-based emulsions. The latter demonstrated the least degree of coalescence over time. Thus, it was concluded that differences in starch particle size and molecular structure influenced the emulsion droplet size and stability. A decreased particle size correlates to a decrease in droplet size, thus increasing stabilisation against creaming. However, stability towards coalescence was low for the large granules but was best for the non-solvent precipitate starch indicating that there is a window of optimal particle size for stability. Thus, best emulsifying properties were obtained with the non-solvent precipitates (~ 120 nm particle size) where the emulsions remained stable after one year of storage. In conclusion, this study illustrated the potentiality of non-solvent precipitated starch as emulsion stabilizers.

Chemical methods and techniques to monitor early Maillard reaction in milk products; A review.

Maillard reaction is an extensively studied, yet unresolved chemical reaction that occurs as a result of application of the heat and during the storage of foods. The formation of advanced glycation end products (AGEs) has been the focus of several investigations recently. These molecules which are formed at the advanced stage of the Maillard reaction, are suspected to be involved in autoimmune diseases in humans. Therefore, understanding to which extent this reaction occurs in foods, is of vital significance. Because of their composition, milk products are ideal media for this reaction, especially when application of heat and prolonged storage are considered. Thus, in this work several chemical approaches to monitor this reaction in an early stage are reviewed. This is mostly done regarding available lysine blockage which takes place in the very beginning of the reaction. The most popular methods and their applications to various products are reviewed. The methods including their modifications are described in detail and their findings are discussed. The present paper provides an insight into the history of the most frequently-used methods and provides an overview on the indicators of the Maillard reaction in the early stage with its focus on milk products and especially milk powders.

Rice Starch Particle Interactions at Air/Aqueous Interfaces-Effect of Particle Hydrophobicity and Solution Ionic Strength.

Starch particles modified by esterification with dicarboxylic acids to give octenyl succinic anhydride (OSA) starch is an approved food additive that can be used to stabilize oil in water emulsions used in foods and drinks. However, the effects of the OSA modification of the starch particle on the interfacial interactions are not fully understood. Here, we directly measured the packing of films of rice starch granules, i.e., the natural particle found inside the plant, at air/aqueous interfaces, and the interaction forces in that system as a function of the particle hydrophobicity and ionic strength, in order to gain insight on how starch particles can stabilize emulsions. This was achieved by using a combined Langmuir trough and optical microscope system, and the Monolayer Interaction Particle Apparatus. Native rice starch particles were seen to form large aggregates at air/water interfaces, causing films with large voids to be formed at the interface. The OSA modification of the rice starches particles decreased this aggregation. Increasing the degree of modification improved the particle packing within the film of particles at the air/water interface, due to the introduction of inter-particle electrostatic interactions within the film. The introduction of salt to the water phase caused the particles to aggregate and form holes within the film, due to the screening of the charged groups on the starch particles by the salt. The presence of these holes in the film decreased the stiffness of the films. The effect of the OSA modification was concluded to decrease the aggregation of the particles at an air/water interface. The presence of salts, however, caused the particles to aggregate, thereby reducing the strength of the interfacial film.

Daily Intake of Milk Powder and Risk of Celiac Disease in Early Childhood: A Nested Case-Control Study.

Milk powder and gluten are common components in Swedish infants' diets. Whereas large intakes of gluten early in life increases the risk of celiac disease in genetically at-risk Swedish children, no study has yet evaluated if intake of milk powder by 2 years of age is associated with celiac disease. A 1-to-3 nested case-control study, comprised of 207 celiac disease children and 621 controls matched for sex, birth year, and HLA genotype, was performed on a birth cohort of HLA-DR3-DQ2 and/or DR4-DQ8-positive children. Subjects were screened annually for celiac disease using tissue transglutaminase autoantibodies (tTGA). Three-day food records estimated the mean intake of milk powder at ages 6 months, 9 months, 12 months, 18 months, and 24 months. Conditional logistic regression calculated odds ratios (OR) at last intake prior to seroconversion of tTGA positivity, and for each time-point respectively and adjusted for having a first-degree relative with celiac disease and gluten intake. Intake of milk powder prior to seroconversion of tTGA positivity was not associated with celiac disease (OR = 1.00; 95% CI = 0.99, 1.03; p = 0.763). In conclusion, intake of milk powder in early childhood is not associated with celiac disease in genetically susceptible children.