Physicochemical Properties of A New PEGylated Polybenzofulvene Brush for Drug Encapsulation.

A new polymer brush was synthesized by spontaneous polymerization of benzofulvene macromonomer 6-MOEG-9-T-BF3k bearing a nona(ethylene glycol) side chain linked to the 3-phenylindene scaffold by means of a triazole heterocycle. The polymer structure was studied by SEC-MALS, NMR spectroscopy, and MALDI-TOF MS techniques, and the results supported the role of oligomeric initiatory species in the spontaneous polymerization of polybenzofulvene derivatives. The aggregation features of high molecular weight poly-6-MOEG-9-T-BF3k-FE were investigated by pyrene fluorescence analysis, dynamic light scattering studies, and transmission electron microscopy, which suggested a tendency towards the formation of spherical objects showing dimensions in the range of 20-200 nm. Moreover, poly-6-MOEG-9-T-BF3k-FE showed an interesting cytocompatibility in the whole concentration range tested that, besides its aggregation features, makes this polybenzofulvene brush a good polymer candidate for nanoencapsulation and delivery of drug molecules. Finally, the photo-physical features of poly-6-MOEG-9-T-BF3k-FE could allow the biodistribution of the resulting drug delivery systems to be monitored by fluorescence microscopy techniques.

Structural Manipulation of the Conjugated Phenyl Moiety in 3-Phenylbenzofulvene Monomers: Effects on Spontaneous Polymerization.

Spontaneous polymerization is an intriguing phenomenon in which pure monomers begin their polymerization without initiators or catalysts. Previously, 3-phenylbenzofulvene monomers were found to polymerize spontaneously after solvent removal. Here, eight new 3-substituted benzofulvene monomers 1a⁻h were synthesized in order to investigate the effects of differently substituted aromatic rings in position 3 of the benzofulvene scaffold on spontaneous polymerization. The newly synthesized monomers maintained the tendency toward spontaneous polymerization. However, monomer 1a, bearing an ortho-methoxy substituted phenyl, polymerized hardly, thus producing low polymerization yields, inhomogeneous structure, and low molecular weight of the obtained polymeric material. This result suggested the importance of the presence of hydrogen atoms in the 2'-position to achieve productive interactions among the monomers in the recognition step preluding the spontaneous polymerization and among the monomeric units in the polybenzofulvene backbones. Moreover, this study paves the way to modify the pendant rings in position 3 of the indene scaffold to synthesize new polybenzofulvene derivatives variously decorated.

Hyaluronan-based graft copolymers bearing aggregation-induced emission fluorogens.

In order to develop a technology platform based on two natural compounds from biorenewable resources, a short series of hyaluronan (HA) copolymers grafted with propargylated ferulic acid (HA-FA-Pg) were designed and synthesized to show different grafting degree values and their optical properties were characterized in comparison with reference compounds containing the same ferulate fluorophore. Interestingly, these studies revealed that the ferulate fluorophore was quite sensitive to the restriction of intramolecular motion and its introduction into the rigid HA backbone, as in HA-FA-Pg graft copolymers, led to higher photoluminescence quantum yield values than those obtained with the isolated fluorophore. Thus, the propargyl groups of HA-FA-Pg derivatives were exploited in the coupling with oleic acid through a biocompatible nona(ethylene glycol) spacer as an example of the possible applications of this technology platform. The resulting HA-FA-NEG-OA materials showed self-assembling capabilities in aqueous environment. Furthermore, HA-FA-NEG-OA derivatives have been shown to interact with phospholipid bilayers both in liposomes and living cells, retaining their fluorogenic properties and showing a high degree of cytocompatibility and for this reason they were proposed as potential biocompatible self-assembled aggregates forming new materials for biomedical applications.

Poly-histidine grafting leading to fishbone-like architectures.

A small series of Morita-Baylis-Hillman adduct (MBHA) derivatives was synthesized and made to react with imidazole, N-acetylhistidine, and N-acetylhexahistidine as models of poly-histidine derivatives. Intriguingly, the reaction of MBHA derivatives 1a and b with imidazole in acetonitrile-phosphate buffered saline (PBS) gave the imidazolium salt biadducts 3a and b as the main reaction products. These results were confirmed by experiments performed with N-acetylhistidine and 1b and suggested the possible occurrence of these structures in the products of poly-histidine labeling with MBHA derivatives 1a and b. These compounds were then transformed into the corresponding water-soluble derivatives 1c-e by introducing oligo(ethylene glycol) chains and their reactivity was evaluated in preliminary experiments with imidazole and then with N-acetylhexahistidine in PBS. The structure of polymeric materials Ac-His-6-MBHA-1d and Ac-His-6-MBHA-1e obtained using ten-fold excesses of compounds 1d and e was investigated using mass spectrometry, NMR spectroscopy, and photophysical studies, which suggested the presence of biadduct residues in both polymeric materials. These results provide the basis for the preparation of fishbone-like polymer brushes, the characterization of their properties, and the exploration of their potential applications in different fields of science such as in vivo fluorogenic labeling, fluorescence microscopy, protein PEGylation, up to the production of smart materials and biosensors.

Electrochemical and optoelectronic properties of terthiophene- and bithiophene-based polybenzofulvene derivatives.

The electrochemical behavior of some polybenzofulvene derivatives bearing bithiophene (BT) or terthiophene (TT) side chains was investigated by cyclic voltammetry. Very interestingly, the presence of unsubstituted terminal thiophene moieties allowed poly-6-BT-BF3k and poly-6-TT-BF3k to be cross-linked by electrochemical procedures. Conductive films were obtained by electrodeposition from solutions of these polymers onto electrode surfaces through the formation of covalent cross-linking due to dimerization (i.e. electrochemical oxidation) of the BT or TT side chains. The films showed electrochromic features and switched from yellow-orange (neutral) to green (positively charged) by switching the potential, and were stable to tenths of cycles, without degradation in the wet state in the electrolyte solution. Finally, the thin film obtained by electrodeposition of poly-6-TT-BF3k on a indium tin oxide (ITO) glass substrate showed in the neutral state a significantly red-shifted photoluminescence (PL) emission (∼40 nm red-shifted with respect to that of the corresponding film obtained by casting procedures), which was consistent with the presence of more conjugated moieties produced by the oxidative dimerization of the TT side chains. The innovative architecture and the easy preparation could lead to a broad range of applications in optoelectronics and bioelectronics for these cross-linked hybrid materials based on π-stacked polybenzofulvene backbones bearing oligothiophene side chains.

Development of Imidazole-Reactive Molecules Leading to a New Aggregation-Induced Emission Fluorophore Based on the Cinnamic Scaffold.

In order to obtain new fluorophores potentially useful in imidazole labeling and subsequent conjugation, a small series of Morita-Baylis-Hillman acetates (3a-c) was designed, synthesized, and reacted with imidazole. The optical properties of the corresponding imidazole derivatives 4a-c were analyzed both in solution and in the solid state. Although the solutions display a very weak emission, the powders show a blue emission, particularly enhanced in the case of compound 4c possessing two methoxy groups in the cinnamic scaffold. The photophysical study confirmed the hypothesis that the molecular rigidity of the solid state enhances the emission properties of these compounds by triggering the restriction of intramolecular motions, paving the way for their applications in fluorogenic labeling.

Polybenzofulvene derivatives bearing dynamic binding sites as potential anticancer drug delivery systems.

In order to obtain new advanced functional materials capable of recognizing drug molecules, the polybenzofulvene backbone of molecular brush poly-6-MOEG-9-TM-BF3k has been functionalized with a "synthetic dynamic receptor" composed of two 1-adamantylurea moieties linked together by means of a dipropyleneamino bridge as in Meijer's bis(adamantylurea) pincer (BAUP). This functional material, bearing synthetic receptors potentially capable of recognizing/loading and then delivering drug molecules, was used to prepare colloidal drug delivery systems (by means of soft interaction with BAUP) for delivering the model anti-cancer drug doxorubicin (DOXO). The resulting nanostructured drug delivery systems containing the physically loaded drug were characterized in terms of drug loading and release, dimensions and zeta potential, and in vitro cell activity and uptake on two different cell lines (i.e. the human bronchial epithelial 16HBE and the human colon cancer HCT116). On normal cells, free DOXO was found to be more cytotoxic than DOXO-loaded nanogels at the higher tested concentration and, only on cancer cells, DOXO-loaded nanogels show similar or slightly higher cytotoxicity values than free DOXO, suggesting potential advantages in the treatment of cancer. These results were supported by fluorescence microscopy studies, which suggested that DOXO-loaded nanogels provide an extracellular reservoir of the drug, which is gradually released and internalized within the cells.