Molecular characterization of begomovirus and DNA satellites associated with mosaic and leaf curl disease of Jamaica cherry (Muntingia calabura) in India: Uncovering a new host for chilli leaf curl India virus.

Begomoviruses, member of the Geminiviridae family, are responsible for significant economic losses in crops worldwide. Chilli leaf curl India virus (ChiLCINV) is a well-known begomovirus that causes leaf curl disease, primarily affecting plants in the Solanaceae family. In this study, sample from a Jamaica cherry (Muntingia calabura) tree showing typical begomovirus symptoms of mosaic and leaf curling was collected from Nagavara village in the Bengaluru Rural district of Karnataka State, India. The collected sample was designated as the MUT-1 isolate. The association of the begomovirus (DNA-A) and betasatellites with the sample was confirmed by PCR using begomovirus-specific primers, resulting in the expected amplicons of approximately 1.2 kb and 1.3 kb, respectively. No amplification was obtained for DNA-B and alphasatellite specific primers. The complete genome sequence of DNA-A of begomovirus isolate MUT-1 was obtained through rolling circle amplification and compared with other begomoviruses using Sequence Demarcation Tool which revealed that, DNA-A of MUT-1 isolate, (Acc.No. PP475538) showed maximum nucleotide (nt) identity of 98.7-99.4% with chilli leaf curl India virus. Further, sequence of betasattelite (Acc.No. PP493212) of this isolate shared maximum nt identity of 86.5-100% with tomato leaf curl Bangladesh betasatellite (ToLCBDB). Recombination and GC plot analysis showed that the presence of two and three intraspecific recombination event in DNA-A and betasatellite genomic regions, respectively and are derived from the previously reported begomoviruses. This study presents one more evidence of expanding host range for begomoviruses and first record of begomovirus associated with mosaic and leaf curl disease of Jamaica cherry (M. calabura) from India. Supplementary Information: The online version contains supplementary material available at 10.1007/s13337-024-00891-w.

Pyrazinoquinoxaline derivatives for flexible electronic devices: effect of the mechanical properties of the crystals on device durability.

Understanding the interplay between the molecular structure and material properties of emerging p-type organic semiconductors marks a significant stride in the advancement of molecular electronics. Among the array of promising materials, mechanically flexible single crystals of π-conjugated molecules stand out due to their potential for cutting-edge applications in organic electronics. Notably, derivatives of pyrazinoquinoxaline (PQ) are recognized as versatile building blocks for constructing π-conjugated systems, showcasing good semiconductor performance in organic field-effect transistors (OFETs). In this study, we present an exploration into the p-type charge transport and mechanical characteristics of two newly synthesized PQ derivatives: 5,10-diphenyl-2,3,7,8-tetra(thiophen-2-yl)pyrazino[2,3-g]quinoxaline (DPTTQ) and 2,3,5,7,8,10-hexa(thiophen-2-yl)pyrazino[2,3-g]quinoxaline (HTPQ). HTPQ crystals exhibit flexural behaviour under applied stress, effortlessly returning to their initial configuration upon relaxation. Conversely, two polymorphic forms of DPTTQ crystals display brittle fracture when subjected to a similar stress. Specifically, DPTTQ molecules adopt a ß-sheet packing, while HTPQ presents a γ-packing with a corrugated arrangement. Field-effect charge transport measurements reveal p-type charge transport in both DPTTQ and HTPQ, with HTPQ showcasing hole mobility up to 0.01 cm2 V-1 s-1, while DPTTQ exhibits mobility that is at least one order of magnitude lower. This variance in the field effect mobility can be directly correlated to the difference in crystal packing, highlighting a clear structure-property correlation. Moreover, taking advantage of the flexural nature of the HTPQ crystals, we fabricated durable electronic devices, which retain their conductivity for over 60 cycles of strain, indicating the efficacy of our chemical design in demonstrating high-performance flexible devices. These findings underscore the promise of semiconducting organics with γ-packing for achieving both better mobility and elasticity for integration into organic electronic devices.

The Efficacy and Safety of Probiotic Combinations Lobun Forte® Versus Renadyl® in Patients With Chronic Kidney Disease: A Comparative, Phase IV, Randomized, Open-Label, Active-Controlled, Parallel Study.

BACKGROUND: Chronic kidney disease (CKD) often leads to gut microbiota imbalance, accelerating disease progression and increasing uremic toxins and inflammation. We conducted a randomized clinical trial comparing outcomes between two multi-strain probiotic supplements Lobun Forte® (Sanzyme P Ltd, Hyderabad, India) containing Streptococcus thermophilus, Lactobacillus acidophilus, Bifidobacterium longum, and Bacillus coagulans and Renadyl® (Kibow Biotech, LLC., Pennsylvania, United States) containing S. thermophilus, L. acidophilus, and B. longum. MATERIALS AND METHODS: Sixty patients with stage 3-4 CKD were randomized to receive either Lobun Forte (n=30) or Renadyl (n=30) for six months, with each supplement providing 45 billion CFU/capsule, twice daily. Primary outcomes included quality of life (QoL) (Short-Form 8 (SF-8) score), reductions in uremic toxins (p-cresyl sulfate (PCS), 3-indoxyl sulfate (IS), indole-3-acetic acid (IAA)), blood urea nitrogen (BUN), serum creatinine, and serum uric acid. Secondary outcomes assessed oxidative stress, inflammatory biomarkers, and estimated glomerular filtration rate (eGFR). Results: Both Lobun Forte and Renadyl groups showed significant improvements in QoL, with Lobun Forte achieving a 53.5% improvement (16.43 point increase) and Renadyl a 51.1% improvement (15.27 point increase) in SF-8 scores (p < 0.0001). The levels of IS decreased significantly in both groups (p < 0.0001), with Lobun Forte reducing IS by 29.72% and Renadyl by 24.20%. In terms of other uremic toxins, Lobun Forte showed non-significant (p > 0.05) reductions in mean PCS (7.63%) and IAA (15.57%), whereas Renadyl demonstrated a significant (p = 0.0314) decrease in PCS (20.75%) and a non-significant (p > 0.05) reduction in IAA (12.35%). Both groups showed significant (p < 0.0001) reductions in BUN and serum creatinine levels. Serum uric acid levels showed a significant (p = 0.0448) reduction with Lobun Forte while Renadyl exhibited a non-significant reduction (p = 0.1034). Lobun Forte significantly (p = 0.0359) reduced mean high-sensitivity C-reactive protein (hsCRP) levels, while Renadyl showed a non-significant reduction (p = 0.0876). Both groups had non-significant reductions in interleukin-6 and tumor necrosis factor-alpha levels (p > 0.05). Further, both groups experienced significant (p < 0.0001) increases in mean glutathione levels and nitric oxide levels. Additionally, Renadyl resulted in a significant reduction in mean malondialdehyde, whereas Lobun Forte showed a non-significant reduction. Both probiotics significantly (p < 0.0001) improved eGFR, with Lobun Forte increasing it by 40.4% and Renadyl by 36.9%. Both probiotics were well tolerated, with a favorable safety profile throughout the study. Conclusion: Both Lobun Forte and Renadyl effectively improve the quality of life in patients with stage 3-4 CKD by modulation of uremic toxins, renal parameters, inflammatory biomarkers, oxidative biomarkers, and eGFR. These findings suggest that both probiotics may help delay CKD progression by modulating the gut-kidney axis.

Sterility Mosaic Disease of Pigeonpea (Cajanus cajan (L.) Huth): Current Status, Disease Management Strategies, and Future Prospects.

Pigeonpea (Cajanus cajan) is one of the important grain legume crops cultivated in the semi-arid tropics, playing a crucial role in the economic well-being of subsistence farmers. India is the major producer of pigeonpea, accounting for over 75% of the world's production. Sterility mosaic disease (SMD), caused by Pigeonpea sterility mosaic virus (PPSMV) and transmitted by the eriophyid mite (Aceria cajani), is a major constraint to pigeonpea cultivation in the Indian subcontinent, leading to potential yield losses of up to 100%. The recent characterization of another Emaravirus associated with SMD has further complicated the etiology of this challenging viral disease. This review focuses on critical areas, including the current status of the disease, transmission and host-range, rapid phenotyping techniques, as well as available disease management strategies. The review concludes with insights into the future prospects, offering an overview and direction for further research and management strategies.

A fine-tuned vision transformer based enhanced multi-class brain tumor classification using MRI scan imagery.

Brain tumors occur due to the expansion of abnormal cell tissues and can be malignant (cancerous) or benign (not cancerous). Numerous factors such as the position, size, and progression rate are considered while detecting and diagnosing brain tumors. Detecting brain tumors in their initial phases is vital for diagnosis where MRI (magnetic resonance imaging) scans play an important role. Over the years, deep learning models have been extensively used for medical image processing. The current study primarily investigates the novel Fine-Tuned Vision Transformer models (FTVTs)-FTVT-b16, FTVT-b32, FTVT-l16, FTVT-l32-for brain tumor classification, while also comparing them with other established deep learning models such as ResNet50, MobileNet-V2, and EfficientNet - B0. A dataset with 7,023 images (MRI scans) categorized into four different classes, namely, glioma, meningioma, pituitary, and no tumor are used for classification. Further, the study presents a comparative analysis of these models including their accuracies and other evaluation metrics including recall, precision, and F1-score across each class. The deep learning models ResNet-50, EfficientNet-B0, and MobileNet-V2 obtained an accuracy of 96.5%, 95.1%, and 94.9%, respectively. Among all the FTVT models, FTVT-l16 model achieved a remarkable accuracy of 98.70% whereas other FTVT models FTVT-b16, FTVT-b32, and FTVT-132 achieved an accuracy of 98.09%, 96.87%, 98.62%, respectively, hence proving the efficacy and robustness of FTVT's in medical image processing.

A simple technique for percutaneous antegrade retrieval of proximally migrated double J stents after pyeloplasty in infants.

Proximal migration of double J (DJ) stent after pyeloplasty poses a difficult problem in infants whose small ureter renders retrograde ureteroscopic retrieval difficult. Previously described antegrade techniques used large access sheaths or blind removal under fluoroscopic guidance. We describe a technique for antegrade retrieval of the stent under direct vision. A 8F vascular access sheath is placed into the renal pelvis under ultrasound guidance. A 6F nephroscope with 3F forceps placed through the sheath grasps and retrieves the stent under direct visualization. This technique is simple, quick, avoids radiation exposure and was used by us successfully in 2 small infants.

The prevalence of malaria in the five districts of Limpopo Province, South Africa, 2015 - 2017.

BACKGROUND: In South Africa (SA), malaria is endemic in three of nine provinces - KwaZulu-Natal, Mpumalanga and Limpopo. During 2010 - 2014, SA reported that ~47.6% of all malaria cases were imported. Contemporary estimates for the prevalence of malaria in the five districts of Limpopo Province are limited, with unknown proportions of imported malaria cases. We estimated the prevalence of malaria, and the proportion of imported malaria cases in the five districts of Limpopo, from January 2015 to December 2017. OBJECTIVE: To measure the prevalence of malaria in Limpopo Province, the proportion of malaria cases that are imported and to determine factors associated with malaria from January 2015 to December 2017. METHODS: We retrospectively reviewed data routinely collected through the Malaria Information System and Laboratory Information System of the National Health Laboratory Services, and assessed associations with age, sex and district, using a multivariable logistic regression model. RESULTS: From 2015 to 2017, a total of 43 199 malaria cases were reported, of which 3.5% (n=1 532) were imported. The prevalence of malaria in Limpopo Province was the highest in 2017, at 331.0 per 100 000 population. The highest malaria prevalence district was Vhembe, with 647.9 in 2015, 220.3 in 2016 and 659.4 in 2017 per 100 000 population. However, Waterberg had the highest proportion of imported malaria cases 28.5% (437/1 532). In adjusted analyses, ages 15 - 49 years (adjusted odds ratio (aOR) 1.58, 95% confidence interval (CI) 1.48 - 1.68, p<0.001) and <1 year (aOR 1.55, 95% CI 1.37 - 0.74, p<0.001) were at higher odds of having malaria compared with ages ≥65 years. CONCLUSION: These findings highlight the significant burden of imported malaria in Limpopo Province. There is a need for strengthened surveillance and control programmes in neighboring countries (such as Mozambique, Zimbabwe and Botswana) to reduce the importation and spread of malaria in this region.

Complete genome characterization of chilli veinal mottle virus associated with mosaic and mottling disease of tomato and development of LAMP assay for quick detection.

Chilli veinal mottle virus (ChiVMV) is a potyvirus known to cause havoc in many solanaceous crops. Samples from tomato plants exhibiting typical mosaic and mottling symptoms in two locations from farmers' fields were collected and tested using DAC ELISA for the presence of ChiVMV and other viruses known to infect tomato. ChiVMV Gauribidanur isolate from infected tomato was mechanically inoculated to Datura metel, Nicotiana tabacum, Nicotiana benthamiana, Nicotiana glutinosa, chilli, and tomato plants which exhibited systemic mosaic and mottling symptoms 10 days post-inoculation. This results were further confirmed by RT-PCR and DAC ELISA using CP gene-specific primers and ChiVMV antisera, respectively. Transmission electron microscopy revealed the presence of long filamentous particles (800 × 11 nm) resembling viruses in the Potyviridae family. The complete genome of ChiVMV comprised 9716 nucleotides except for poly A tail, with a predicted open reading frame spanning 9270 nucleotides encoding polyproteins of 3089 amino acids. Comparative analysis revealed that ChiVMV-tomato isolates reported across the world shared maximum nucleotide identity (93-96.7%) with chilli isolates from India and Pakistan. These results were well supported by sequence demarcation analysis. Further, the Neibhor-Net network analysis of the complete genome of ChiVMV-tomato, along with other host isolates, formed a reticular network phylogenetic tree suggesting recombination events. Subsequently, RDP5 detected intra-specific recombination breakpoints at the positions 1656-5666 nucleotides with major parent ChiVMV (MN508960) Uravakonda and minor parent ChiVMV (MN508956) with a significant average p value of 1.905 × 10-22. The LAMP assay using ChiVMV-specific primers resulted in ladder-like amplified products on electrophoresed gel and a distinct red colour pattern with hydroxy naphthalene blue, indicating a positive reaction for the presence of ChiVMV in infected tomato samples. To validate LAMP-designed primers, RNA extracted from ChiVMV-infected tomato, chilli, datura, and tobacco samples were subjected to LAMP assay and it accurately detected the presence of ChiVMV in infected plant samples. Overall, this study provides holistic information of ChiVMV infecting tomato, spanning diagnosis, transmission, genetic characterization, and detection of recombination events, which collectively contribute to effective disease management, crop protection, and informed decision-making in agricultural practices.

Computational analysis of affinity dynamics between the variants of SARS-CoV-2 spike protein (RBD) and human ACE-2 receptor.

The novel coronavirus SARS-CoV-2 resulted in a significant worldwide health emergency known as the COVID-19 pandemic. This crisis has been marked by the widespread of various variants, with certain ones causing notable apprehension. In this study, we harnessed computational techniques to scrutinize these Variants of Concern (VOCs), including various Omicron subvariants. Our approach involved the use of protein structure prediction algorithms and molecular docking techniques, we have investigated the effects of mutations within the Receptor Binding Domain (RBD) of SARS-CoV-2 and how these mutations influence its interactions with the human angiotensin-converting enzyme 2 (hACE-2) receptor. Further we have predicted the structural alterations in the RBD of naturally occurring SARS-CoV-2 variants using the tr-Rosetta algorithm. Subsequent docking and binding analysis employing HADDOCK and PRODIGY illuminated crucial interactions occurring at the Receptor-Binding Motif (RBM). Our findings revealed a hierarchy of increased binding affinity between the human ACE2 receptor and the various RBDs, in the order of wild type (Wuhan-strain) < Beta < Alpha < Gamma < Omicron-B.1.1.529 < Delta < Omicron-BA.2.12.1 < Omicron-BA.5.2.1 < Omicron-BA.1.1. Notably, Omicron-BA.1.1 demonstrated the highest binding affinity of -17.4 kcal mol-1 to the hACE2 receptor when compared to all the mutant complexes. Additionally, our examination indicated that mutations occurring in active residues of the Receptor Binding Domain (RBD) consistently improved the binding affinity and intermolecular interactions in all mutant complexes. Analysis of the differences among variants has laid a foundation for the structure-based drug design targeting the RBD region of SARS-CoV-2.

Crystal property engineering using molecular-supramolecular equivalence: mechanical property alteration in hydrogen bonded systems.

Most crystal engineering strategies exercised until now mainly rely on the alteration of weak non-covalent interactions to design structures and thus properties. Examples of mechanical property alteration for a given structure type are rare with only a few halogen bonded cases. The modular nature of halogen bonds with interaction strength tunability makes the task straightforward to obtain property differentiated crystals. However, the design of such crystals using hydrogen bond interactions has proven to be non-trivial, because of its relatively higher difference in bonding energies, and more importantly, disparate geometries of the functional groups. In the present crystal property engineering exercise, with the support of CSD analysis, we replaced a supramolecular precursor that leads to plastically bendable crystals, with a molecular equivalent, and obtained an equivalent crystal structure. As a result, the new structure, with comparable hydrogen bonding chains, produces elastically bendable single crystals (as opposed to plastically bendable crystals). In addition, the crystals show multidirectional (here two) elastic bending as well as rare elastic twisting. The occurrence of multiple isostructural examples, including a solid solution, with identical properties further demonstrates the general applicability of the proposed model. Crystals cannot display the concerned mechanical property in the absence of the desired structure type and fracture in a brittle manner on application of an external stress. Nanomechanical experiments and energy framework calculations also complement our results. To the best of our knowledge, this is the first example of a rational crystal engineering exercise using solely hydrogen bond interactions to obtain property differentiated crystals. This strategy namely molecular-supramolecular equivalence has been unexplored till now to tune mechanical properties, and hence is useful for crystal property engineering.

Biomonitoring of mercury and selenium in commercially important shellfish: Distribution pattern, health benefit assessment and consumption advisories.

This study aims to explore the concentrations of Se and Hg in shellfish along the Gulf of Mannar (GoM) coast (Southeast India) and to estimate related risks and risk-based consumption limits for children, pregnant women, and adults. Se concentrations in shrimp, crab, and cephalopods ranged from 0.256 to 0.275 mg kg-1, 0.182 to 0.553 mg kg-1, and 0.176 to 0.255 mg kg-1, respectively, whereas Hg concentrations differed from 0.009 to 0.014 mg kg-1, 0.022 to 0.042 mg kg-1 and 0.011 to 0.024 mg kg-1, respectively. Se and Hg content in bamboo shark (C. griseum) was 0.242 mg kg-1 and 0.082 mg kg-1, respectively. The lowest and highest Se concentrations were found in C. indicus (0.176 mg kg-1) and C. natator (0.553 mg kg-1), while Hg was found high in C. griseum (0.082 mg kg-1) and low in P. vannamei (0.009 mg kg-1). Se shellfishes were found in the following order: crabs > shrimp > shark > cephalopods, while that of Hg were shark > crabs > cephalopods > shrimp. Se in shellfish was negatively correlated with trophic level (TL) and size (length and weight), whereas Hg was positively correlated with TL and size. Hg concentrations in shellfish were below the maximum residual limits (MRL) of 0.5 mg kg-1 for crustaceans and cephalopods set by FSSAI, 0.5 mg kg-1 for crustaceans and 1.0 mg kg-1 for cephalopods and sharks prescribed by the European Commission (EC/1881/2006). Se risk-benefit analysis, the AI (actual intake):RDI (recommended daily intake) ratio was > 100%, and the AI:UL (upper limit) ratio was < 100%, indicating that all shellfish have sufficient level of Se to meet daily requirements without exceeding the upper limit (UL). The target hazard quotient (THQ < 1) and hazard index (HI < 1) imply that the consumption of shellfish has no non-carcinogenic health impacts for all age groups. However, despite variations among the examined shellfish, it was consistently observed that they all exhibited a Se:Hg molar ratio > 1. This finding implies that the consumption of shellfish is generally safe in terms of Hg content. The health benefit indexes, Se-HBV and HBVse, consistently showed high positive values across all shellfish, further supporting the protective influence of Se against Hg toxicity and reinforcing the overall safety of shellfish consumption. Enhancing comprehension of food safety analysis, it is crucial to recognize that the elevated Se:Hg ratio in shellfish may be attributed to regular selenoprotein synthesis and the mitigation of Hg toxicity by substituting Se bound to Hg.

Optimising barrier placement for intrusion detection and prevention in WSNs.

This research addresses the pressing challenge of intrusion detection and prevention in Wireless Sensor Networks (WSNs), offering an innovative and comprehensive approach. The research leverages Support Vector Regression (SVR) models to predict the number of barriers necessary for effective intrusion detection and prevention while optimising their strategic placement. The paper employs the Ant Colony Optimization (ACO) algorithm to enhance the precision of barrier placement and resource allocation. The integrated approach combines SVR predictive modelling with ACO-based optimisation, contributing to advancing adaptive security solutions for WSNs. Feature ranking highlights the critical influence of barrier count attributes, and regularisation techniques are applied to enhance model robustness. Importantly, the results reveal substantial percentage improvements in model accuracy metrics: a 4835.71% reduction in Mean Squared Error (MSE) for ACO-SVR1, an 862.08% improvement in Mean Absolute Error (MAE) for ACO-SVR1, and an 86.29% enhancement in R-squared (R2) for ACO-SVR1. ACO-SVR2 has a 2202.85% reduction in MSE, a 733.98% improvement in MAE, and a 54.03% enhancement in R-squared. These considerable improvements verify the method's effectiveness in enhancing WSNs, ensuring reliability and resilience in critical infrastructure. The paper concludes with a performance comparison and emphasises the remarkable efficacy of regularisation. It also underscores the practicality of precise barrier count estimation and optimised barrier placement, enhancing the security and resilience of WSNs against potential threats.

Global spatial distribution of Prosopis juliflora - one of the world's worst 100 invasive alien species under changing climate using multiple machine learning models.

Climate change is one of the factors contributing to the spread of invasive alien species. As a result, it is critical to investigate potential invasion dynamics on a global scale in the face of climate change. We used updated occurrence data, bioclimatic variables, and Köppen-Geiger climatic zones to better understand the climatic niche dynamics of Prosopis juliflora L. (Fabaceae). In this study, we first compared several algorithms-MaxEnt, generalized linear model (GLM), artificial neural network (ANN), generalized boosted model (GBM), generalized additive model (GAM), and random forest (RF)-to investigate the relationships between species-environment and climate for mesquite. We identified the global climate niche similarity sites (NSSs) using the coalesce approach. This study focused on the current and future climatic suitability of P. juliflora under two global circulation models (GCMs) and two climatic scenarios, i.e., Representative Concentration Pathways (RCPs), 4.5 and 8.5, for 2050 and 2070, respectively. Sensitivity, specificity, true skill statistic (TSS), kappa coefficient, and correlation were used to evaluate model performance. Among the tested models, the machine learning algorithm random forest (RF) demonstrated the highest accuracy. The vast swaths of currently uninvaded land on multiple continents are ideal habitats for invasion. Approximately 9.65% of the area is highly suitable for the establishment of P. juliflora. Consequently, certain regions in the Americas, Africa, Asia, Europe, and Oceania have become particularly vulnerable to invasion. In relation to RCPs, we identified suitable area changes (expansion, loss, and stability). The findings of this study show that NSSs and RCPs increase the risk of invasion in specific parts of the world. Our findings contribute to a cross-border continental conservation effort to combat P. juliflora  expansion into new potential invasion areas.

What Is the Likelihood of Union and Frequency of Complications After Parallel Plating and Supplemental Bone Grafting for Resistant Distal Femoral Nonunions?

BACKGROUND: Management of resistant distal femur nonunions is challenging because patients not only have disability from an unhealed fracture, but also often have a shortened femur, stiff knee, deformities, and bone defects to address during revision surgery. Dual plating of the distal femur in such a setting can maintain stability that allows the nonunion to heal while also addressing bone defects and correcting deformities simultaneously. Dual-plating techniques that have been described lack standardization with regard to the size and type of medial-side implants and configuration of the dual-plate construct. QUESTIONS/PURPOSES: (1) What proportion of patients achieve radiologic evidence of union after parallel plating of resistant distal femoral nonunions? (2) What improvements in function are achieved with this approach, as assessed by improvements in femoral length discrepancy, knee flexion, and patient-reported outcome scores? (3) What complications are associated with the technique? METHODS: Between 2017 and 2020, the senior author of this study treated 38 patients with resistant distal femoral nonunions, defined here as nonunions that persisted for more than 12 months since the injury despite a minimum of two previous internal fixation procedures. During the study period, our preferred technique for treating aseptic, resistant distal femoral nonunions was to use dual plates in a parallel configuration augmented with autografts. Of 38 patients, three patients with active signs of infection who underwent resection and reconstruction using bone transport techniques and two patients older than 65 years with deficient distal femur bone stock who underwent endoprosthetic reconstruction were excluded. Of the 33 included patients, 67% (22 of 33) were male. The median age was 40 years (range 20 to 67 years). Nonunion was articular and metaphyseal in 13 patients and metaphyseal only in 20 patients. Our surgical approach was to remove existing implants, perform intraoperative culturing to rule out infection, debride the nonunion, correct the deformity, perform intra-articular and extra-articular lysis of adhesions with quadriceps release, and apply fixation using medial and lateral fixed-angle anatomic locked implants positioned in a parallel configuration. Every attempt to improve length was undertaken, and the defects were filled with autografts. A total of 97% of patients were followed until union occurred (one of 33 was lost to follow-up before union was documented), and 79% (26 of 33) were assessed for functional outcomes at a minimum of 2 years (median 38 months [range 25 to 60 months]) after excluding patients lost to follow-up and those in whom union did not occur after parallel plating. Union was defined as evidence of central trabecular bridging on AP radiographs and posterior cortical bridging on lateral radiographs. These radiologic criteria were defined to overcome difficulties in assessing radiologic healing in patients with lateral and medial plates. With parallel plating, bridging trabecular bone along the posterior cortex on lateral radiographs and the central region on AP radiographs is visualized and can be appreciated and interpreted as evidence of healing in two orthogonal planes. Preoperative and follow-up clinical assessment of knee ROM, the extent of femoral length correction based on calibrated femoral radiographs before and after surgery, and the evaluation of improvement in lower limb function based on the preoperative and follow-up differences in responses to the lower extremity functional scale (LEFS) were studied (the LEFS is scored from 0 to 80, with higher scores representing better function). Complications and secondary surgical procedures to address them were abstracted from a longitudinally maintained trauma database. RESULTS: Sixty-seven percent (22 of 33) of nonunions showed radiologic healing by 24 weeks, and another 24% (eight of 33) healed by 36 weeks. Six percent (two of 33) did not unite, and one patient was lost to follow-up before union was documented. In the 79% (26 of 33) of patients available for final functional outcome assessment, the median femoral shortening had improved from 2.4 cm (range 0 to 4 cm) to 1.1 cm (range 0 to 2.3 cm; p < 0.001), and the median knee ROM had improved from 70° (range 20° to 110°) to 100° (range 50° to 130°; p = 0.002) after surgery. The median LEFS score improved to 63 (range 41 to 78) compared with 22 (range 15 to 33; p < 0.001) before surgery. Serious complications, including major thromboembolic events, iliac graft site infection, knee stiffness (flexion < 60°), and medial plate impingement necessitating removal, were seen in 30% (10 of 33) of patients. Secondary surgical interventions were performed in 24% (eight of 33) of patients to address procedure-related complications. CONCLUSION: Based on our findings, a high likelihood of union and improvements in knee and lower limb function can be expected with parallel plating of resistant distal femur nonunions using anatomic locked plates. However, the increased frequency of complications observed in our study suggests the need for improvements in dual-plating techniques and to explore possible alternative fixation methods through larger multicenter comparative studies. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Microscopic Cracks Modulate Nucleation and Solid-State Crystallization Tendency of Amorphous Celecoxib.

Drugs have been classified as fast, moderate, and poor crystallizers based on their inherent solid-state crystallization tendency. Differential scanning calorimetry-based heat-cool-heat protocol serves as a valuable tool to define the solid-state crystallization tendency. This classification helps in the development of strategies for stabilizing amorphous drugs. However, microscopic characteristics of the samples were generally overlooked during these experiments. In the present study, we evaluated the influence of microscopic cracks on the crystallization tendency of a poorly water-soluble model drug, celecoxib. Cracks developed in the temperature range of 0-10 °C during the cooling cycle triggered the subsequent crystallization of the amorphous phase. Nanoindentation study suggested minimal differences in mechanical properties between samples, although the cracked sample showed relatively inhomogeneous mechanical properties. Nuclei nourishment experiments suggested crack-assisted nucleation, which was supported by Raman data that revealed subtle changes in intermolecular interactions between cracked and uncracked samples. Celecoxib has been generally classified as class II, i.e., a drug with moderate crystallization tendency. Interestingly, classification of amorphous celecoxib may change depending on the presence or absence of cracks in the amorphous sample. Hence, subtle events such as microscopic cracks should be given due consideration while defining the solid-state crystallization tendency of drugs.

Tricuspid valve annular tilt for assessment of pre- and post-intervention right ventricular volume in patients undergoing transcatheter pulmonary valve replacement.

INTRODUCTION: Transcatheter pulmonary valve replacement serves as a successful alternative to surgical replacement of a right ventricle to pulmonary artery conduit. Guidelines for recommending transcatheter pulmonary valve replacement depend on MRI right ventricular volumes, which have been correlated to the echocardiographic measure of right ventricular annular tilt. We aim to assess whether right ventricular annular tilt can be a clinically useful alternative tool in the acute and long-term periods after transcatheter pulmonary valve replacement to assess right ventricular health. METHODS: We reviewed 70 patients who underwent transcatheter pulmonary valve replacement at a single institution. Echocardiographic measurements were obtained prior to transcatheter pulmonary valve replacement, immediately after transcatheter pulmonary valve replacement, and within 6 months to 1 year after transcatheter pulmonary valve replacement. Right ventricular annular tilt measures the angle of the tricuspid valve plane relative to the mitral valve plane at end-diastole in the apical four-chamber view. Right ventricular fractional area change, right ventricular systolic strain, tissue Doppler velocity, and tricuspid annular plane systolic excursion Z-scores were obtained using published methods. RESULTS: Right ventricular annular tilt decreased significantly immediately after transcatheter pulmonary valve replacement (p = 0.0004), and this reduction in right ventricular volume persisted at the mid-term follow-up (p < 0.0001). Fractional area change did not change significantly after transcatheter pulmonary valve replacement while right ventricular global strain improved at mid-term follow-up despite no significant difference immediately after transcatheter pulmonary valve replacement. CONCLUSIONS: Right ventricular annular tilt decreases both immediately after transcatheter pulmonary valve replacement and at mid-term follow-up. Right ventricular strain also improved after transcatheter pulmonary valve replacement, corresponding to the improved volume load. Right ventricular annular tilt can be considered as an additional echocardiographic factor to assess right ventricular volume and remodeling after transcatheter pulmonary valve replacement.

Thermally activated delayed fluorescence in a mechanically soft charge-transfer complex: role of the locally excited state.

Molecular design for thermally activated delayed fluorescence (TADF) necessitates precise molecular geometric requirements along with definite electronic states to ensure high intersystem crossing (ISC) rate and photoluminescence quantum yield (PLQY). Achieving all these requirements synchronously while maintaining ease of synthesis and scalability is still challenging. To circumvent this, our strategy of combining a crystal engineering approach with basic molecular quantum mechanical principles appears promising. A holistic, non-covalent approach for achieving efficient TADF in crystalline materials with distinct mechanical properties is highlighted here. Charge transfer (CT) co-crystals of two carbazole-derived donors (ETC and DTBC) with an acceptor (TFDCNB) molecule are elaborated as a proof-of-concept. Using temperature-dependent steady-state and time-resolved photoluminescence techniques, we prove the need for a donor-centric triplet state (3LE) to ensure efficient TADF. Such intermediate states guarantee a naturally forbidden, energetically uphill reverse intersystem crossing (RISC) process, which is paramount for effective TADF. A unique single-crystal packing feature with isolated D-A-D trimeric units ensured minimal non-radiative exciton loss, leading to a high PLQY and displaying interesting mechanical plastic bending behaviour. Thus, a comprehensive approach involving a non-covalent strategy to circumvent the conflicting requirements of a small effective singlet-triplet energy offset and a high oscillator strength for efficient TADF emitters is achieved here.

Begomovirus and DNA-satellites association with mosaic and leaf curl disease of Solanum nigrum and Physalis minima: the new hosts for chilli leaf curl virus.

The numerous plants of Solanum nigrum L, and Physalis minima L, well-known weeds with medicinal properties in agriculture and horticulture crops exhibiting severe mosaic, enation and leaf curl symptoms, were collected from the Varanasi and Mirzapur districts of Uttar Pradesh, India. The begomovirus infection in S. nigrum and P. minima was validated by PCR using virus-specific primers. The whole genome of the represented isolate of S. nigrum (SN1), P. minima (PM1), and beta satellite was amplified, cloned and sequenced. The SDT analysis showed that the DNA-A of PM1 and SN1 isolate showed the highest nt identity of 87.4 to 99.1%, with several chilli leaf curl virus (ChiLCuV) isolates from India and Oman, respectively. The betasatellite sequence (PM1ß) obtained from the PM1 isolate showed a very low identity of 83.1-84.5%. A demarcation threshold of 91% for betasatellite species delineation has led to identifying a new betasatellite in the PM1 sample. This unique betasatellite has been named "physalis minima leaf curl betasatellite," indicating its novelty with the plant. Whereas, betasatellite sequence (SN1ß) obtained from the SN1 sample showed 86.8-91.2% nucleotide identity with ChiLCB isolates infecting several crops in Indian subcontinents. The RDP analysis of the viral genome and betasatellite of SN1 and PM1 isolates revealed recombination in substantial portions of their genetic makeup, which appeared to have originated from pre-existing begomoviruses known to infect diverse host species. The present research also highlights the potential role of these plants as significant reservoir hosts for ChiLCuV in chili plants. Supplementary Information: The online version contains supplementary material available at 10.1007/s13337-023-00850-x.

Genome sequencing of cucumber mosaic virus (CMV) isolates infecting chilli and its interaction with host ferredoxin protein of different host for causing mosaic symptoms.

Chilli (Capsicum annuum L.) is an important vegetable crop grown in the Indian sub-continent and is prone to viral infections under field conditions. During the field survey, leaf samples from chilli plants showing typical symptoms of disease caused by cucumber mosaic virus (CMV) such as mild mosaic, mottling and leaf distortion were collected. DAC-ELISA analysis confirmed the presence of CMV in 71 out of 100 samples, indicating its widespread prevalence in the region. Five CMV isolates, named Gu1, Gu2, BA, Ho, and Sal were mechanically inoculated onto cucumber and Nicotiana glutinosa plants to study their virulence. Inoculated plants expressed the characteristic symptoms of CMV such as chlorotic spots followed by mild mosaic and leaf distortion. Complete genomes of the five CMV isolates were amplified, cloned, and sequenced, revealing RNA1, RNA2, and RNA3 sequences with 3358, 3045, and 2220 nucleotides, respectively. Phylogenetic analysis classified the isolates as belonging to the CMV-IB subgroup, distinguishing them from subgroup IA and II CMV isolates. Recombination analysis showed intra and interspecific recombination in all the three RNA segments of these isolates. In silico protein-protein docking approach was used to decipher the mechanism behind the production of mosaic symptoms during the CMV-host interaction in 13 host plants. Analysis revealed that the production of mosaic symptoms could be due to the interaction between the coat protein (CP) of CMV and chloroplast ferredoxin proteins. Further, in silico prediction was validated in 13 host plants of CMV by mechanical sap inoculation. Twelve host plants produced systemic symptoms viz., chlorotic spot, chlorotic ringspot, chlorotic local lesion, mosaic and mild mosaic and one host plant, Solanum lycopersicum produced mosaic followed by shoestring symptoms. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03777-8.

Autonomous self-healing organic crystals for nonlinear optics.

Non-centrosymmetric molecular crystals have a plethora of applications, such as piezoelectric transducers, energy storage and nonlinear optical materials owing to their unique structural order which is absent in other synthetic materials. As most crystals are brittle, their efficiency declines upon prolonged usage due to fatigue or catastrophic failure, limiting their utilities. Some natural substances, like bone, enamel, leaf and skin, function efficiently, last a life-time, thanks to their inherent self-healing nature. Therefore, incorporating self-healing ability in crystalline materials will greatly broaden their scope. Here, we report single crystals of a dibenzoate derivative, capable of self-healing within milliseconds via autonomous actuation. Systematic quantitative experiments reveal the limit of mechanical forces that the self-healing crystals can withstand. As a proof-of-concept, we also demonstrate that our self-healed crystals can retain their second harmonic generation (SHG) with high efficiency. Kinematic analysis of the actuation in our system also revealed its impressive performance parameters, and shows actuation response times in the millisecond range.