Pneumolysin/Plasma Protein Adsorption, Bacterial Adherence, and Cell Adhesion Characteristics of a Cell-Membrane-Mimicking Polymer System.

This study delivers the first report on a cell-membrane-mimicking polymer system, poly[oxy(4-(13-cholenoatenonyl)-1,2,3-triazoyl-1-methyl)ethylene-random-oxy(4-(13-phosphorylcholinenonyl)-1,2,3-triazoyl-1-methyl)ethylene] (PGA-CholmPCn) films in various compositions in terms of physicochemical properties, protein adsorptions, bacterial adherences, and human cell adhesions. Higher Chol-containing PGA-CholmPCn in a self-assembled multi-bilayer membrane structure is confirmed to show excellently high affinity to pneumolysin (a cytolysin) and its C-terminal fragment (domain 4) but substantially suppressed affinity to the N-terminal fragment (domains 1-3) and further to plasma proteins. Furthermore, the adherences of pathogenic bacteria are increased favorably; however, the adhesion and proliferation of a human HEp-2 cell line are hindered severely. In contrast, higher-PC-containing PGA-CholmPCn membranes promote HEp-2 cell adhesion and proliferation but significantly suppress the adsorptions of pneumolysin and its fragments and plasma proteins as well as bacterial adherence. The results collectively confirm that PGA-CholmPCn can yield a membrane platform enriched with hydrophobic Chol and hydrophilic and zwitterionic PC moieties in any desired compositions, providing highly selective and sensitive physicochemical characters and biocompatibilities which are demanded for applications in various fields including biomedicine, cosmetics, and environmentally friendly consumer products.

Newly Found Digital Memory Characteristics of Pyrrolidone- and Succinimide-Based Polymers.

This study reports for the first time the excellent nonvolatile and volatile digital memory characteristics of polymers bearing 2-pyrrolidone and succinimide moieties. A series of new polymers is synthesized from poly(ethylene-alt-maleic anhydride) and four alcohol derivatives with and without 2-pyrrolidone and succinimide moieties. All polymers, including polyvinylpyrrolidone, are found to be thermally stable up to 195 °C or higher, and characterized regarding their molecular orbital energy levels, bandgap, and resistive digital memory behaviors. Excitingly, the polymers bearing either 2-pyrrolidone or succinimide moiety demonstrate p-type digital memory behaviors with high ON/OFF current ratios and long reliabilities. Nonvolatile digital memory performance is achieved over the film thickness range of 10-80 nm, whereas volatile digital memory is demonstrated over a much narrower range of film thickness. All digital memory performances can be originated from the 2-pyrrolidone and succinimide moieties possessing high affinity and stabilization power to charges via charge traps and transformations based on a hopping conduction process. Hence, these new polymers are suitable for the production of high-performance p-type nonvolatile and volatile digital memory devices. Moreover, 2-pyrrolidone and succinimide can be used as new and economical electroactive building blocks for the development of advanced digital memory materials.

Seventeen-Armed Star Polystyrenes in Various Molecular Weights: Structural Details and Chain Characteristics.

Star-shaped polymers are very attractive because of their potential application ability in various technological areas due to their unique molecular topology. Thus, information on the molecular structure and chain characteristics of star polymers is essential for gaining insights into their properties and finding better applications. In this study, we report molecular structure details and chain characteristics of 17-armed polystyrenes in various molecular weights: 17-Arm(2k)-PS, 17-Arm(6k)-PS, 17-Arm(10k)-PS, and 17-Arm(20k)-PS. Quantitative X-ray scattering analysis using synchrotron radiation sources was conducted for this series of star polymers in two different solvents (cyclohexane and tetrahydrofuran), providing a comprehensive set of three-dimensional structure parameters, including radial density profiles and chain characteristics. Some of the structural parameters were crosschecked by qualitative scattering analysis and dynamic light scattering. They all were found to have ellipsoidal shapes consisting of a core and a fuzzy shell; such ellipse nature is originated from the dendritic core. In particular, the fraction of the fuzzy shell part enabling to store desired chemicals or agents was confirmed to be exceptionally high in cyclohexane, ranging from 74 to 81%; higher-molecular-weight star polymer gives a larger fraction of the fuzzy shell. The largest fraction (81%) of the fuzzy shell was significantly reduced to 52% in tetrahydrofuran; in contrast, the lowest fraction (19%) of core was increased to 48%. These selective shell contraction and core expansion can be useful as a key mechanism in various applications. Overall, the 17-armed polystyrenes of this study are suitable for applications in various technological fields including smart deliveries of drugs, genes, biomedical imaging agents, and other desired chemicals.

Quantitative Structural Analysis of Polystyrene Nanoparticles Using Synchrotron X-Ray Scattering and Dynamic Light Scattering.

A series of polystyrene nanoparticles (PS-1, PS-2, PS-3, and PS-4) in aqueous solutions were investigated in terms of morphological structure, size, and size distribution. Synchrotron small-angle X-ray scattering analysis (SAXS) was carried out, providing morphology details, size and size distribution on the particles. PS-1, PS-2, and PS-3 were confirmed to behave two-phase (core and shell) spherical shapes, whereas PS-4 exhibited a single-phase spherical shape. They all revealed very narrow unimodal size distributions. The structural parameter details including radial density profile were determined. In addition, the presence of surfactant molecules and their assemblies were detected for all particle solutions, which could originate from their surfactant-assisted emulsion polymerizations. In addition, dynamic light scattering (DLS) analysis was performed, finding only meaningful hydrodynamic size and intensity-weighted mean size information on the individual PS solutions because of the particles' spherical nature. In contrast, the size distributions were extracted unrealistically too broad, and the volume- and number-weighted mean sizes were too small, therefore inappropriate to describe the particle systems. Furthermore, the DLS analysis could not detect completely the surfactant and their assemblies present in the particle solutions. Overall, the quantitative SAXS analysis confirmed that the individual PS particle systems were successfully prepared with spherical shape in a very narrow unimodal size distribution.

Phase Transition Behaviors and Nanoscale Film Morphologies of Poly(δ-valerolactone) Axles Bearing Movable and Fixed Rotaxane Wheels.

In this study, poly(δ-valerolactone) (PVL) axles bearing movable and fixed dibenzo-24-crown-8-ether wheels (rot-M and rot-F) are investigated for the first time in the terms of phase transition and nanoscale film morphology: PVL-rot-M and PVL-rot-F. Interestingly, the PVL axles reveal a strong tendency to form a horizontal lamellar structure with three different rotational crystal lattice domains in nanoscale films. The morphological structural parameters are discernibly varied by the movable and fixed rotaxane wheels. In particular, the rot-M wheel tends to be populated in both the interfacial and amorphous layers. The rot-M wheel is found to significantly influence the phase transition characteristics of the PVL axle because of its movability along the polymer backbone chain. In contrast, the rot-F wheel tends to be more localized in the interfacial layer rather than in the amorphous layer because of its immovability constrained at the polymer chain end. The rot-F wheel causes severe thermal instability in the PVL axle, which can be attributed mainly to the presence of its counter anion (PF6 - ).

Nanoscale Film Morphology and n-Type Digital Memory Characteristics of π-Conjugated Donor-Acceptor Alternating Copolymer Based on Thiophene and Thiadiazole Units.

Various molecular weight π-conjugated donor-acceptor polymers based on thiadiazole and thiophene units are investigated with respect to nanoscale film morphology and digital memory performance. Interestingly, all polymers reveal excellent n-type digital permanent memory characteristics, which are governed by the combination of Ohmic and trap-limited space charge limited conductions via a hopping process using thiadiazole and thiophene units as charge traps and stepping stones. The digital memory performance is significantly influenced by the film morphology details that vary with the polymer molecular weight as well as the film thickness. A higher population of face-on structure formation, as well as higher molecular weight, provides a wider film thickness window of digital memory operation. Overall, π-conjugated PBTDzTV polymers are suitable for the production of high-performance, programmable n-type permanent memory devices with very low power consumption.

Bacillus licheniformis α-amylase: Structural feature in a biomimetic solution and structural changes in extrinsic conditions.

Bacillus licheniformis α-amylase (BLA) in a biomimetic buffer and extrinsic solutions (various pH values, temperatures, and metal ions) has been investigated for the first time in the view of three-dimensional (3D) structure by synchrotron X-ray and dynamic light scattering analyses. BLA in buffer is determined to have a structure resembling its crystallographic structure; but the 3D structure is slightly larger than the crystal structure. Such a structure is maintained with little variations in extrinsic solutions of pH 4.0-9.7, temperature 4-55 °C, and metal ions such as Ba2+, Mg2+, and Li+. These results collectively inform that BLA tends to favorably form a stable monomeric structure, which could provide structural clues to its enzymatic activities in moderate levels. Interestingly, BLA is found to reveal highly expanded structures at 65-75 °C and in Co2+ solution, which could correlate to the significantly pronounced enzymatic activities. However, BLA shows somewhat shrunken structures at pH 3.0 and in Hg2+ solution, supporting for the suppressed activities under these conditions.

Pronounced Side Chain Effects in Triple Bond-Conjugated Polymers Containing Naphthalene Diimides for n-Channel Organic Field-Effect Transistors.

Three triple bond-conjugated naphthalene diimide (NDI) copolymers, poly{[ N, N'-bis(2-R1)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]- alt-[(2,5-bis(2-R2)-1,4-phenylene)bis(ethyn-2,1-diyl)]} (PNDIR1-R2), were synthesized via Sonogashira coupling polymerization with varying alkyl side chains at the nitrogen atoms of the imide ring and 2,5-positions of the 1,4-diethynylbenzene moiety. Considering their identical polymer backbone structures, the side chains were found to have a strong influence on the surface morphology/nanostructure, thus playing a critical role in charge-transporting properties of the three NDI-based copolymers. Among the polymers, the one with an octyldodecyl (OD) chain at the nitrogen atoms of imide ring and a hexadecyloxy (HO) chain at the 2,5-positions of 1,4-diethynylbenzene, P(NDIOD-HO), exhibited the highest electron mobility of 0.016 cm2 V-1 s-1, as compared to NDI-based copolymers with an ethylhexyl chain at the 2,5-positions of 1,4-diethynylbenzene. The enhanced charge mobility in the P(NDIOD-HO) layers is attributed to the well-aligned nano-fiber-like surface morphology and highly ordered packing structure with a dominant edge-on orientation, thus enabling efficient in-plane charge transport. Our results on the molecular structure-charge transport property relationship in these materials may provide an insight into novel design of n-type conjugated polymers for applications in the organic electronics of the future.

Digital Memory Characteristics of Aromatic Polyimides Based on Pyridine and Its Derivatives.

Soluble aromatic polyimides and polyvinyls were prepared by incorporating pyridine moiety and its derivatives in the backbone and the side groups, respectively: 6F-Py-i polymers based on the polyimide backbone (6F-Py-1 to 6F-Py-7) and PVPy-i polymers based on the polyvinyl backbone (PVPy-1 to PVPy-4). All polymers were found to be amorphous. The 6F-Py-i polymers were thermally stable up to 511-545 °C; the PVPy-i polymers were stable up to 362-376 °C. Their glass transitions, thin film densities, molecular orbitals, and band gaps were determined. The electrical devices fabricated with the polymers in an electrode/polymer/electrode structure revealed p-type unipolar write-once-read-many times (namely, permanent) or dynamic random access memory or dielectric behavior, depending on the substituents of the pyridine unit and the film thicknesses. In particular, such digital memory characteristics were found to originate from the pyridine moieties possessing a high charge affinity in the polymers. However, the pyridine moieties were found to still need at least two or more aromatic substituents to get enough power to stabilize charges via utilizing the resonance effects provided by the substituents. Overall, this study demonstrated that the pyridine unit conjugated with two or more aromatic substituents is a very useful component to design and synthesize digital memory materials based on thermally stable polyimides and other high performance polymers. The 6F-Py-i polymers have potential for the low-cost mass production of high-performance programmable unipolar permanent memory devices with very low power consumption.

Structural Characteristics of Pneumolysin and Its Domains in a Biomimetic Solution.

Pneumolysin (PLY) and its truncated fragments, domains 1-3 (D1-3), and domain 4 (D4), were purified as recombinant proteins after being cloned and over-expressed in Escherichia coli. The three-dimensional structures of these proteins were quantitatively investigated in a biomimetic condition, phosphate buffered saline (PBS) by synchrotron X-ray scattering. X-ray scattering analysis revealed important structural features including structural parameters. PLY was present as a monomeric form in PBS. The monomeric form resembled its crystallographic structure with a discrepancy of only 6.3%, confirming that PLY forms a stable structure and, thus, retains its structure in the crystalline state and even in PBS solution. D4 was also present as a monomeric form, but its structure was very different from that of the corresponding part in the crystallographic PLY structure; the discrepancy was 92.0%. Such a dissimilar structure might originate from a less folded-chain conformation. This result suggested that the structure of D4 is highly dependent on the crystalline or solution state and further on the presence or absence of the D1-3 unit. In contrast, D1-3 was dimeric rather than monomeric. Its structure was close to the most probable dimeric form of the corresponding part in the crystallographic PLY structure with 13.1% discrepancy. This fact indicated that the D1-3 unit forms a stable structure and, indeed, such structure is well maintained in the crystalline state as well as in PBS although presented as a dimer. This result further supported that the whole structural stability of PLY is mainly attributed to the structure of D1-3. All of PLY, D1-3, and D4 revealed aggregation tendencies during purification and storage. Overall, the structural characteristics of PLY and its domains in PBS may correlate to the PLY oligomer formation yielding large pore structures for the penetration of cell membranes.

A Comparative Study of Dynamic Light and X-ray Scatterings on Micelles of Topological Polymer Amphiphiles.

Micelles were prepared in organic solvents by using three topological polymer amphiphiles: (i) cyclic poly(n-decyl glycidyl ether-block-2-(2-(2-methoxyethoxy)ethoxy)ethyl glycidyl ether) (c-PDGE-b-PTEGGE) and (ii) its linear analogue (l-PDGE-b-PTEGGE); (iii) linear poly(6-phosphorylcholinehexylthiopropyl glycidyl ether-block-n-dodecanoyl glycidyl ether) (l-PPCGE-b-PDDGE). For the individual micelle solutions, the size and distribution were determined by dynamic light scattering (DLS) and synchrotron X-ray scattering analyses. The synchrotron X-ray scattering analysis further found that c-PDGE-b-PTEGGE forms oblate ellipsoidal micelle in an ethanol/water mixture, l-PDGE-b-PTEGGE makes prolate ellipsoidal micelle in an ethanol/water mixture, and l-PPCGE-b-PDDGE forms cylindrical micelle in chloroform. This comparative study found that there are large differences in the size and distribution results extracted by DLS and X-ray scattering analyses. All possible factors to cause such large differences are discussed. Moreover, a better use of the DLS instrument with keeping its merits is proposed.

Precise Synthesis, Properties, and Structures of Cyclic Poly(ε-caprolactone)s.

Cyclic PCL (c-PCL) has drawn great attention from academia and industry because of its unique, unusual structure and property characteristics due to the absence of end groups in addition to the biocompatibility and biodegradability of its linear analogue. As a result of much research effort, several synthetic methods have been developed to produce c-PCLs so far. Their chain, morphology and property characteristics were investigated even though carried out on a very limited basis. This feature article reviews the research progress made in the synthesis, morphology, and properties of c-PCL; all results and their pros and cons are discussed in terms of purity and molecular weight distribution in addition to the cyclic topology effect. In addition, we attempted to synthesize a series of c-PCL products of high purity by using intramolecular azido-alkynyl click cyclization chemistry and subsequent precise and controlled separation and purification; and their thermal degradation and phase transitions were investigated in terms of the cyclic topology effect.

Self-Assembling Brush Polymers Bearing Multisaccharides.

Three different series of brush polymers bearing glucosyl, maltosyl, or maltotriosyl moiety at the bristle end are successfully prepared by using cationic ring-opening polymerization and two sequential postmodification reactions. All brush polymers, except for the polymer containing 100 mol% maltotriosyl moiety, demonstrate the formation of multibilayer structure in films, always providing saccharide-enriched surface. These self-assembling features are remarkable, regarding the bulkiness of saccharide moieties and the kink in the bristle due to the triazole linker. The saccharide-enriched film surfaces reveal exceptionally high specific binding affinity to concanavalin A but suppress nonspecific binding of plasma proteins severely. Overall, the brush polymers bearing saccharide moieties of various kinds in this study are highly suitable materials for biomedical applications including biosensors.

Self-Assembly-Assisted Biomolecule-Enriched Surface and High Selectivity Performance of Simple Solution-Coatable Biomimicking Brush Copolymers.

Poly(oxy(11-(biotinyl)undecylthiomethyl)ethylene-co-oxy(11-phosphoryl-cholineundecylthiomethyl)ethylene)s (PECH-BTmPCn: m = 0-100 mol % biotin (BT)-containing bristle; n = 100-0 mol % phosphorylcholine (PC)-containing bristle) were newly synthesized. All polymers exhibited excellent solution processability. They favorably self-assembled horizontal multibilayer structures in thin films with BT- and PC-enriched surfaces, which were driven by the lateral ordering of the fully extended upright bristles and the partial interdigitation between the BT and PC end groups of the bristles. Both hydrophilicity and water sorption of the films increased with the PC content. The PECH-BT100 films revealed remarkably distinctive sensitivity, selectivity, and adsorption ability for avidin against other proteins. Such remarkable performance was further significantly enhanced on the PECH-BTmPCn films in which PC moieties were incorporated to the BT-rich surface; in particular, the PECH-BT75PC25 films demonstrated the highest performance. Overall, the self-assembly brush copolymers of this study are very suitable for use in the high performance detection, adsorption, and separation of proteins and receptors, including avidin, which can reveal high affinity and selectivity to BT moiety.

Well-defined hollow nanochanneled-silica nanospheres prepared with the aid of sacrificial copolymer nanospheres and surfactant nanocylinders.

A new approach for synthesizing well-defined hollow nanochanneled-silica nanosphere particles is demonstrated, and the structural details of these particles are described for the first time. Positively charged styrene copolymer nanospheres with a clean, smooth surface and a very narrow size distribution are synthesized by surfactant-free emulsion copolymerization and used as a thermal sacrificial core template for the production of core-shell nanoparticles. A surfactant/silica composite shell with a uniform thickness is successfully produced and deposited onto the polymeric core template by charge density matching between the polymer nanosphere template surface and the negatively charged silica precursors and then followed by selective thermal decomposition of the polymeric core and the surfactant cylinder domains in the shell, producing the hollow nanochanneled-silica nanospheres. Comprehensive, quantitative structural analyses collectively confirm that the obtained nanoparticles are structurally well defined with a hollow core and a shell composed of cylindrical nanochannels that provide facile accessibility to the hollow interior space. Overall, the hollow nanochanneled-silica nanoparticles have great potential for applications in various fields.

Clues to the electrical switching mechanism of carbazole-containing polyimide thin films.

The mechanism behind electrical memory behavior of carbazole-containing polyimides (PIs) in nanoscale thin films was investigated. For this investigation, a series of poly(3,3'-dihydroxy-4,4'-biphenylene-co-3,3'-bis(N-ethylenyloxycarbazole)-4,4'-biphenylene hexafluoro-isopropylidenedi-phthalimide)s (6F-HAB-HABCZn PIs) with various compositions was synthesized as a model carbazole-containing polymer system. The thermal properties, band gaps, and molecular orbital levels of the PIs were determined. Furthermore, the chemical compositions, as well as the nanoscale thin film morphologies and electron densities, were analyzed, providing detailed information on the population and positional distribution of carbazole moieties in thin films of the PIs. PI Devices were fabricated with aluminum electrodes and tested electrically. The PI thin film layers in the devices exhibited electrically permanent memory behavior, which was driven by trap-limited space-charge limited conduction and ohmic conduction. The permanent memory characteristics were found to be attributed to the incorporated carbazole moieties rather than from the other chemical components. Furthermore, the memory characteristics depended significantly on the population and positional distribution of carbazole moieties in the PI layer, as well as the film thickness. Considering that the backbone is not conjugated, the present results collectively indicate that the electrical switching behavior of the PI films is driven by the carbazole moieties acting as charge traps and a hopping process using the carbazole charge-trap sites as stepping-stones.

Digital memory versatility of fully π-conjugated donor-acceptor hybrid polymers.

The fully π-conjugated donor-acceptor hybrid polymers Fl-TPA, Fl-TPA-TCNE, and Fl-TPA-TCNQ, which are composed of fluorene (Fl), triphenylamine (TPA), dimethylphenylamine, alkyne, alkyne-tetracyanoethylene (TCNE) adduct, and alkyne-7,7,8,8-tetracyanoquinodimethane (TCNQ) adduct, were synthesized. These polymers are completely amorphous in the solid film state and thermally stable up to 291-409 °C. Their molecular orbital levels and band gaps vary with their compositions. The TCNE and TCNQ units, despite their electron-acceptor characteristics, were found to enhance the π-conjugation lengths of Fl-TPA-TCNE and Fl-TPA-TCNQ (i.e., to produce red shifts in their absorption spectra and significant reductions in their band gaps). These changes are reflected in the electrical digital memory behavior of the polymers. Moreover, the TCNE and TCNQ units were found to diversify the digital memory modes and to widen the active polymer layer thickness window. In devices with aluminum top and bottom electrodes, the Fl-TPA polymer exhibits stable unipolar permanent memory behavior with high reliability. The Fl-TPA-TCNE and Fl-TPA-TCNQ devices exhibit stable unipolar permanent memory behavior as well as dynamic random access memory behavior with excellent reliability. These polymer devices were found to operate by either hole injection or hole injection along with electron injection, depending on the polymer composition. Overall, this study demonstrated that the incorporation of π-conjugated cyano moieties, which control both the π-conjugation length and electron-accepting power, is a sound approach for the design and synthesis of high-performance digital memory polymers. The TCNE and TCNQ polymers synthesized in this study are highly suitable active materials for the low-cost mass production of high-performance, polarity-free, programmable, volatile, and permanent memory devices that can be operated with very low power consumption, high ON/OFF current ratios, and high reliability.

Self-assembly of novel lipid-mimicking brush polymers in nanoscale thin films.

A series of well-defined poly(oxy(11-phosphorylcholineundecylthiomethyl)ethylene-ran-oxy(n-dodecylthiomethyl)ethylene) (PECH-PCm: m = 0-100 mol% phosphorylcholine (PC)) polymers were used to prepare nanoscale thin films that were characterized by synchrotron X-ray reflectivity (XR) analysis. The quantitative XR analysis provided structural insights into the PECH-PCm thin films. The PECH-PC0 polymer film formed a well-ordered in-plane oriented molecular multibilayer structure, whose individual layers consisted of two sublayers. One sublayer was composed of the fully extended backbones and inner part of the bristles, exhibiting a relatively low electron density, whereas the other sublayer was composed of a bilayer of the outer parts of the bristles without interdigitation. The PECH-PC100 polymer film also formed a well-ordered in-plane oriented molecular multibilayer structure, the individual layers of which were composed of four sublayers rather than two. The bristles in the layer were interdigitated in part via the zwitterionic interactions of the PC end groups. Surprisingly, regardless of the copolymer composition, the PECH-PCm random copolymer molecules in the thin films self-assembled to form a multilayered structure that resembled the structure formed by the PECH-PC100 polymer. These properties have not been observed in other conventional random brush copolymer films. The remarkable multibilayer structures originated from the zwitterionic PC end groups and their favorable interactions and interdigitated structures, which overcame any negative contributions caused by the heterogeneity of the bristles. The unique self-assembly properties of the PECH-PCm polymers always provide a PC-rich surface. The PECH-PCm random copolymers successfully mimicked the molecular bilayer structures formed by natural lipids.

Probing the self-assembled nanostructures of functional polymers with synchrotron grazing incidence X-ray scattering.

For advanced functional polymers such as biopolymers, biomimic polymers, brush polymers, star polymers, dendritic polymers, and block copolymers, information about their surface structures, morphologies, and atomic structures is essential for understanding their properties and investigating their potential applications. Grazing incidence X-ray scattering (GIXS) is established for the last 15 years as the most powerful, versatile, and nondestructive tool for determining these structural details when performed with the aid of an advanced third-generation synchrotron radiation source with high flux, high energy resolution, energy tunability, and small beam size. One particular merit of this technique is that GIXS data can be obtained facilely for material specimens of any size, type, or shape. However, GIXS data analysis requires an understanding of GIXS theory and of refraction and reflection effects, and for any given material specimen, the best methods for extracting the form factor and the structure factor from the data need to be established. GIXS theory is reviewed here from the perspective of practical GIXS measurements and quantitative data analysis. In addition, schemes are discussed for the detailed analysis of GIXS data for the various self-assembled nanostructures of functional homopolymers, brush, star, and dendritic polymers, and block copolymers. Moreover, enhancements to the GIXS technique are discussed that can significantly improve its structure analysis by using the new synchrotron radiation sources such as third-generation X-ray sources with picosecond pulses and partial coherence and fourth-generation X-ray laser sources with femtosecond pulses and full coherence.

Structural Characteristics of Amphiphilic Cyclic and Linear Block Copolymer Micelles in Aqueous Solutions.

The structural characteristics of aqueous micelles composed of amphiphilic cyclic poly(n-butyl acrylate-b-ethylene oxide) (cyclic PBA-b-PEO) or a linear analogue (i.e., linear poly(n-butyl acrylate-b-ethylene oxide-b-n-butyl acrylate) (linear PBA-b-PEO-b-PBA)) were examined for the first time using synchrotron X-ray scattering techniques and quantitative data analysis. The scattering data were analyzed using a variety of methodologies in a comprehensive complementary manner. These analyses provided details of the structural information about the micelles. Both micelles were found to consist of a core and a fuzzy shell; however, the cyclic block copolymer had a strong tendency to form micelles with core and shell parts that were more compact and dense than the corresponding parts of the linear block copolymer micelles. The PBA block of the cyclic copolymer was found to form a hydrophobic core with a density that exceeded the density of the homopolymer in the bulk state. The structural differences originated primarily from the topological difference between the cyclic and linear block copolymers. The elimination of the chain end groups (which introduced entropy and increased the excess excluded volume) from the amphiphilic block copolymer yielded more stable dense micelles in solution.