Protocol for construction and characterization of direct electron transfer-based enzyme-electrode using gold binding peptide as molecular binder.

Here, we present a protocol for constructing direct electron transfer (DET)-based enzyme-electrodes using gold-binding peptide (GBP). We describe fusion of four GBPs to flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase gamma-alpha complex (GDHγα), as model oxidoreductase, to generate four GDHγα variants. We then detail the measurements of catalytic and bioelectrochemical properties of these GDHγα variants on electrode together with surface morphology of GDHγα variants immobilized on gold surface. This protocol is useful for construction and validation of enzyme-based electrocatalytic system. For complete details on the use and execution of this protocol, please refer to Lee et al. (2021).

Control of carbon monoxide dehydrogenase orientation by site-specific immobilization enables direct electrical contact between enzyme cofactor and solid surface.

Controlling the orientation of redox enzymes on electrode surfaces is essential in the development of direct electron transfer (DET)-based bioelectrocatalytic systems. The electron transfer (ET) distance varies according to the enzyme orientation when immobilized on an electrode surface, which influences the interfacial ET rate. We report control of the orientation of carbon monoxide dehydrogenase (CODH) as a model enzyme through the fusion of gold-binding peptide (gbp) at either the N- or the C-terminus, and at both termini to strengthen the binding interactions between the fusion enzyme and the gold surface. Key factors influenced by the gbp fusion site are described. Collectively, our data show that control of the CODH orientation on an electrode surface is achieved through the presence of dual tethering sites, which maintains the enzyme cofactor within a DET-available distance (<14 Å), thereby promoting DET at the enzyme-electrode interface.

Peptide sequence-driven direct electron transfer properties and binding behaviors of gold-binding peptide-fused glucose dehydrogenase on electrode.

Oriented enzyme immobilization on electrodes is crucial for interfacial electrical coupling of direct electron transfer (DET)-based enzyme-electrode systems. As inorganic-binding peptides are introduced as molecular binders and enzyme-orienting agents, inorganic-binding peptide-fused enzymes should be designed and constructed to achieve efficient DET. In this study, it is aimed to compare the effects of various gold-binding peptides (GBPs) fused to enzymes on electrocatalytic activity, bioactivity, and material-binding behaviors. Here, GBPs with identical gold-binding properties but different amino acid sequences were fused to the FAD-dependent glucose dehydrogenase gamma-alpha complex (GDHγα) to generate four GDHγα variants. The structural, biochemical, mechanical, and bioelectrochemical properties of these GDHγα variants immobilized on electrode were determined by their fused GBPs. Our results confirmed that the GBP type is vital in the design, construction, and optimization of GBP-fused enzyme-modified electrodes for facile interfacial DET and practical DET-based enzyme-electrode systems.

Functional Expression of a Mo-Cu-Dependent Carbon Monoxide Dehydrogenase (CODH) and Its Use as a Dissolved CO Bio-microsensor.

Herein, we report the heterologous expression in Escherichia coli of a Mo-Cu-containing carbon monoxide dehydrogenase (Mo-Cu CODH) from Hydrogenophaga pseudoflava, which resulted in an active protein catalyzing CO oxidation to CO2. By supplying the E. coli growth medium with Na2MoO4 (Mo) and CuSO4 (Cu), the Mo-Cu CODH metal cofactors precursors, the expressed L-subunit was found to have CO-oxidation activity even without the M- and S- subunits. This successful expression of CO-oxidizing-capable single L-subunit provides direct evidence of its role as the catalytic center of Mo-Cu CODH that has not been discovered and studied before. Subsequently, we used the expressed protein to construct a CO bio-microsensor based on a newly developed fast and sensitive Clark-type CO2 transducer using an aprotic solvent/ionic liquid electrolyte. The CO bio-microsensor exhibited a linear response to CO concentration in the 0-9 µM range, with a limit of detection (LOD) of 15 nM CO. The sensor uses a mixture of Mo-Cu CODH's L-subunit/Mo, Cu cofactors/methylene blue, confined in the enzyme chamber that is placed in front of a CO2 transducer. The optimized sensor's sensitivity and performance were retained to levels of at least 80% for 1 week of continuous polarization and operation in an aqueous medium. We have also demonstrated the use of an alkaline front-trap solution to make a completely O2/CO2 interference-free microsensor. The CO bio-microsensor developed in this study is potentially useful as an analytical tool for the detection of trace CO in dissolved form for monitoring dissolved CO concentration dynamics in natural or synthetic systems.

Biosensing and electrochemical properties of flavin adenine dinucleotide (FAD)-Dependent glucose dehydrogenase (GDH) fused to a gold binding peptide.

In the present work, direct electron transfer (DET) based biosensing system for the determination of glucose has been fabricated by utilizing gold binding peptide (GBP) fused flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) from Burkholderia cepacia. The GBP fused FAD-GDH was immobilized on the working electrode surface of screen-printed electrode (SPE) which consists of gold working electrode, a silver pseudo-reference electrode and a platinum counter electrode, to develop the biosensing system with compact design and favorable sensing ability. The bioelectrochemical and mechanical properties of GBP fused FAD-GDH (GDH-GBP) immobilized SPE (GDH-GBP/Au) were investigated. Here, the binding affinity of GDH-GBP on Au surface, was highly increased after fusion of gold binding peptide and its uniform monolayer was formed on Au surface. In the cyclic voltammetry (CV), GDH-GBP/Au displayed significantly high oxidative peak currents corresponding to glucose oxidation which is almost c.a. 10-fold enhanced value compared with that from native GDH immobilized SPE (GDH/Au). As well, GDH-GBP/Au has shown 92.37% of current retention after successive potential scans. In the chronoamperometry, its steady-state catalytic current was monitored in various conditions. The dynamic range of GDH-GBP/Au was shown to be 3-30 mM at 30 °C and exhibits high selectivity toward glucose in whole human blood. Additionally, temperature dependency of GDH-GBP/Au on DET capability was also investigated at 30-70 °C. Considering this efficient and stable glucose sensing with simple and easy sensor fabrication, GDH-GBP based sensing platform can provide new insight for future biosensor in research fields that rely on DET.

Dissolved carbon monoxide concentration monitoring platform based on direct electrical connection of CO dehydrogenase with electrically accessible surface structure.

CO dehydrogenase (CODH) employed in a dissolved CO biosensor development study harbors a solvent-exposed cofactor capable of DET to electrode. Here, CODH was immobilized on arrays of AuNPs of various dimensions to determine the effect of the size and shape of the electrode surface on the direct electrical connection between CODH and electrode surface. The results showed the degree of proximity between the CODH cofactor and electrode surface, which varied with AuNP size and caused significant changes to the electrical connection at the interface as well as to the substrate accessibility. Consequently, a high-density nanoscale SRS was fabricated on electrode to further facilitate direct electrical connection as well as to enable distribution of CODH into monolayer or near-monolayer for lowering the barrier of CO diffusion toward enzyme. The findings show the feasibility of controlling the direct electrical connection between CODH and the electrode as well as controlling the substrate accessibility.

Construction of Uniform Monolayer- and Orientation-Tunable Enzyme Electrode by a Synthetic Glucose Dehydrogenase without Electron-Transfer Subunit via Optimized Site-Specific Gold-Binding Peptide Capable of Direct Electron Transfer.

Direct electron transfer (DET) between enzymes and electrodes is a key issue for practical use of bioelectrocatalytic devices as a bioenergy process, such as enzymatic electrosynthesis, biosensors, and enzyme biofuel cells. To date, based on the DET of bioelectrocatalysis, less than 1% of the calculated theoretical current was transferred to final electron acceptor due to energy loss at enzyme-electrode interface. This study describes the design and construction of a synthetic glucose dehydrogenase (GDH; α and γ subunits) combined with a gold-binding peptide at its amino or carboxy terminus for direct contact between enzyme and electrode. The fused gold-binding peptide facilitated stable immobilization of GDH and constructed uniform monolayer of GDH onto a Au electrode. Depending on the fused site of binding peptide to the enzyme complex, nine combinations of recombinant GDH proteins on the electrode show significantly different direct electron-transfer efficiency across the enzyme-electrode interface. The fusion of site-specific binding peptide to the catalytic subunit (α subunit, carboxy terminus) of the enzyme complex enabled apparent direct electron transfer (DET) across the enzyme-electrode interface even in the absence of the electron-transfer subunit (i.e., ß subunit having cytochrome domain). The catalytic glucose oxidation current at an onset potential of ca. (-)0.46 V vs Ag/AgCl was associated with the appearance of an flavin adenine dinucleotide (FAD)/FADH2 redox wave and a stabilized bioelectrocatalytic current of more than 100 µA, determined from chronoamperometric analysis. Electron recovery was 7.64%, and the catalytic current generation was 249 µA per GDH enzyme loading unit (U), several orders of magnitude higher than the values reported previously. These observations corroborated that the last electron donor facing to electrode was controlled to be in close proximity without electron-transfer intermediates and the native affinity for glucose was preserved. The design and construction of the site-specific "sticky-ended" proteins without loss of catalytic activity could be applied to other redox enzymes having a buried active site.