Sustainable appraisal of lac (Kerria Lacca) based anthraquinone natural dye for chemical and bio-mordanted viscose and silk dyeing.

The coloring behavior of laccaic acid, a natural red dye derived from lac insects, has been investigated in this work for the dyeing of silk and viscose fabrics while being heated in MW radiation. The extract was made in an aqueous and acidic media and then used to color fabrics under microwave treatment for up to 10 min. For developing new shades, eco-friendly green bio-mordants and, in comparison, chemical mordants were employed at given conditions. The obtained results revealed that the aqueous extract after 4 min of radiation exposure produced a high color strength (K/S = 17.132) onto silk and the aqueous extract after 6 min of radiation exposure produced better color strength (K/S = 6.542) onto viscose at selected conditions. The fastness ratings evaluation as per ISO standards demonstrates that bio-anchors have provided good ratings under selected irradiation and dyeing conditions. It is concluded that this environmentally friendly technique has improved the natural coloration process of fabrics as well as addition of green mordants has furnished colorfast shades using lac-derived natural anthraquinone dye.

Novel Curcumin-Encapsulated α-Tocopherol Nanoemulsion System and Its Potential Application for Wound Healing in Diabetic Animals.

Objective: This project was aimed at formulating a novel nanoemulsion system and evaluating it for open incision wound healing in diabetic animals. Methods: The nanoemulsions were characterized for droplet size and surface charge, drug content, antioxidant and antimicrobial profiling, and wound healing potential in diabetic animals. The skin samples excised were also analyzed for histology, mechanical strength, and vibrational and thermal analysis. Results: The optimized nanoemulsion (CR-NE-II) exhibited droplet size of26.76 ± 0.9 nm with negative surface charge (-10.86 ± 1.06 mV), was homogenously dispersed with drug content of68.05 ± 1.2%, released almost82.95 ± 2.2%of the drug within first 2 h of experiment with synergistic antioxidant (95 ± 2.1%) and synergistic antimicrobial activity against selected bacterial strains in comparison to blank nanoemulsion, and promoted significantly fast percent reepithelization (96.47%). The histological, vibrational, thermal, and strength analysis of selected skin samples depicted a uniform and even distribution of collagen fibers which translated into significant increase in strength of skin samples in comparison to the control group. Conclusions: The optimized nanoemulsion system significantly downregulated the oxidative stress, enhanced collagen deposition, and precluded bacterial contamination of wound, thus accelerating the skin tissue regeneration process.

Experimental Study of the Post-Fire Mechanical and Material Response of Cold-Worked Austenitic Stainless Steel Reinforcing Bar.

This paper is concerned with the behaviour of stainless steel reinforcing bar following exposure to elevated temperatures from a fire, followed by subsequent cooling. Stainless steel-reinforced concrete is an increasingly popular solution for structural applications which require corrosion resistance, excellent mechanical properties, and long life cycles with little maintenance. In addition, although stainless steel reinforcement has a higher initial cost compared with traditional carbon steel bars, the overall life cycle costs are likely to be quite similar, owing to the lack of maintenance required for stainless steel materials. There is no information available in the literature on the post-fire properties of austenitic stainless steel reinforcement, although these data are essential for any engineer who wishes to study the structural integrity of a reinforced concrete component or system following a fire. Accordingly, this paper presents a detailed discussion and analysis from the results of a series of laboratory experiments on three grades of austenitic stainless steel reinforcement following various levels of temperature exposure and also different cooling rates. Both the mechanical and metallurgical properties are examined, and the behaviour is compared to that of B500B carbon steel reinforcement. It is shown that the stainless steel bars retained their mechanical properties under the majority of the scenarios examined and to a greater degree than traditional materials. This is important for the rehabilitation and salvage of existing reinforced concrete structures following a fire and also to avoid unnecessary demolition and replacement.

Environmental friendly extraction of walnut bark-based juglone natural colorant for dyeing studies of wool fabric.

Environmental friendly products particularly natural dyes are going to be much popular around the globe due to their non-toxic and bio-degradable nature. The current study was planned to enhance the dyeability of walnut bark having juglone as a reddish-brown natural dye under ultrasonic radiation as an environment-friendly and green tool After conducting series of experiments, it has been found that wool (RW) and extract (RE) after ultrasonic treatment for 45 min, when dyed for 45 min at 55°C using an acidic bath of 3 pH has given good color strength on the wool fabric. To develop the new shades, sustainable and eco-label chemicals (Fe, Al, and tannic acid) and four bio-mordants such as Acacia bark, Turmeric, Henna, and Pomegranate were also applied at optimum conditions. It is studied that 3% of turmeric extract as pre-bio-mordant and 5% of Acacia extract as post-bio-mordant has given excellent color characteristics as compared to their synthetic. It is concluded that ultrasonic treatment being an eco-friendly tool has a great potential to improve the dyeability of natural reddish-brown dye from walnut bark and the inclusion of sustainable biosources as a color modifier has value-added the natural dyeing process with excellent color ratings.

Identification of a Novel Homozygous Missense (c.443A>T:p.N148I) Mutation in BBS2 in a Kashmiri Family with Bardet-Biedl Syndrome.

BACKGROUND: Bardet-Biedl syndrome (BBS) is a rare autosomal recessive inherited disorder with distinctive clinical feature such as obesity, degeneration of retina, polydactyly, and renal abnormalities. The study was aimed at finding out the disease-causing variant/s in patients exhibiting clinical features of BBS. METHODS: The identification of disease-causing variant was done by using whole exome sequencing on Illumina HiSeq 4000 platform involving the SeqCap EZ Exome v3 kit (Roche NimbleGen). The identified variant was further validated by Sanger sequencing. RESULTS: WES revealed a novel homozygous missense mutation (NM_031885: c.443A>T:p.N148I) in exon 3 of the BBS2 gene. Sanger sequencing confirmed this variant as homozygous in both affected subjects and heterozygous in obligate parents, demonstrating autosomal recessive inheritance pattern. To the best of our knowledge, this variant was not present in literature and all publically available databases. The candidate variant is predicted to be pathogenic by a set of in-silico softwares. CONCLUSION: Clinical and genetic spectrum of BBS and BBS-like disorders is not completely defined in the Pakistani as well as in Kashmiri population. Therefore, more comprehensive genetic studies are required to gain insights into genotype-phenotype associations to facilitate carrier screening and genetic counseling of families with such disorders.

Sustainable application of cochineal-based anthraquinone dye for the coloration of bio-mordanted silk fabric.

Natural colors particularly animal-based colorants are employed in the field of cosmetics, food, and flavors and also gaining popularity in textiles, due to their soothing nature. In this study, the microwave-assisted extraction of colorant from cochineal insects for dyeing of bio-mordanted silk has been carried out. Acidic, methanolic, and acidified methanol solubilized media were used to extract the natural colorant from cochineal under microwave irradiation for 1-6 min. Bio-mordants have been employed at optimized conditions to make the process greener and sustainable. It is found that acid solubilized extract of pH 4, employed at 55 °C for 55 min containing 5 g/100 mL of Glauber's salt as exhausting agent has given high color strength onto microwave-treated silk fabric. Suggested ISO standards for colorfastness have revealed that bio-mordants have given excellent color depth and excellent rating of fastness properties, compared with chemical mordants used. It is found that microwave treatment has not only improved the dyeing behavior of colorant extracted from cochineal in acid solubilized medium but also enhanced the color characteristics onto bio-mordanted silk fabric.

Thiol-disulfide exchange reactions occurring at modified bovine serum albumin detected using ellman's reagent (5, 5'-dithiobis (2-itrobenzoic acid).

Bovine serum albumin (BSA) is usually employed as a model protein because of being homologous with human serum albumin. Cysteine-34 of BSA has been oxidised with Ellman's reagent to produce BSA labelled with an Ellman's moiety (BSA-SE). The BSA-SE was then reacted with glutathione, N-acetylcysteine and D-penicillamine (D-pen). The two were able to release the Ellman's moiety bound at cysteine-34 while D-pen did not. Albumin labeled using Ellman's reagent was used to demonstrate the cleavage of a protein mixed disulphide. The kinetics of thiol disulfide interchange reactions involving formation of a chromophoric thiolate were determined by UV-visible spectroscopy. The reaction of thiolates with excess Ellman's reagent is used for quantitative estimation of thiol by measuring the absorption at λ, 412 nm. The disulfide exchange reactions occurring at Cys-34 of BSA was determined and the reduction of oxidized Cys-34 was studied in order to understand the reverse reaction. Spectroscopic evidence suggested that glutathione and N-acetylcysteine remove the label and produce BSA in a disulfide form. In contrast, D-pen reaction returned BSA to its thiolate form via mediation. It was observed that thio-disulfide exchange occurred at cysteine-34 labelled with Ellman's moiety. The implications to the redox status of plasma are discussed.

Ultrasonic assisted improved extraction and dyeing of mordanted silk fabric using neem bark as source of natural colourant.

Natural products with therapeutic nature are nowadays warmly welcomed in textiles. Current study is concerned with isolation of tannin from neem bark (Azadirachta indica) and its application onto silk fabric. For improvement in shades, chemical & bio-mordants have been employed at optimal dyeing conditions. It is found that methanolic extract of pH 5 obtained 8 g dye powder after US Treatment for 30 min has given high color strength if used to dye irradiated silk for 65 min at 75 °C. Bio-mordanting using herbal plants has improved the color characteristics as compared to chemical mordants used. ISO standards for color fastness reveal that herbal based bio-mordants have improved the rating from good to excellent as compared to chemical mordants used. It is concluded that US treatment has not only isolate the colorant for neem bark under mild condition but also given excellent characteristic using bio mordants onto silk fabrics.

Review - Ricinus cmmunis - Ethnomedicinal uses and pharmacological activities.

Ricinus cmmunis L. (Castor oil plant) is an important medicinal plant belonging to family Euphorbiaceae. Its phytochemistry, biological and pharmacological activities, and ethnomedicinal uses have been reviewed in the present study. The reported chemical constituents showed the presence of flavonoids, phenolic compounds, fatty acids, amino acids, terpenoids, phytosterol etc. The compounds have been reported to exhibit anticonceptive, antidiabetic, antifertility, anti-inflammatory, antimicrobial, antioxidant, hepatoprotective, insecticidal and wound-healing activities. They also showed free radical scavenging and Hg scavenging activities, and repellent properties. Various parts of R. communis have been widely used in traditional medicine such as abdominal disorders, arthritis, backache, muscle aches, bilharziasis, chronic backache and sciatica, chronic headache, constipation, expulsion of placenta, gallbladder pain, period pain, menstrual cramps, rheumatism, sleeplessness, and insomnia. Castor oil plant has also revealed toxic effects due to the presence of ricin (protein) and ricinine (alkaloid). Comparatively, ricin is more toxic. But still there is need of more research to be conducted with reference to its medicinal importance (particularly exploring of medicinal recipes) and active compounds responsible for various activities.

Synthesis, Spectral investigation (¹H, ¹³C) and Anti-microbial Screening of benzophenone imines.

New series of benzophenone imines with general formula Ph2-C=NR; R = Benzyl, 4-Fluorobenzyl, Naphthyl, Phenyl, 4-Nitrophenyl were synthesized by condensation of dichlorodiphenylmethane and different aromatic primary amines (1:1) Those imines were characterized by different physiochemical and spectroscopic techniques like melting point, elemental analysis, FT-IR, multinuclear NMR (¹H, ¹³C). After characterization, imines were subjected to anti-microbial activities. All compounds showed promising activity against different bacterial strains like Escherichia coli, Bacillussubtilis, Pasturellam ultocida and Staphylococcus aureus as well as fungal strains like Alternata alternaria, Ganoderma lucidium, Penicillium notatum and Trichoderma harzianum using Amoxicillin and Flucanazole as a standard drugs respectively.

Acoustical behavior of some amino acids in aqueous disodium citrate solutions over temperature range (298.15-313.15) K.

Sound velocity, U, and density, ρ of some amino acids viz. glycine, methionine, phenylalanine and tryptophan were determined in 0.1, 0.2 and 0.3 mol kg⁻¹ aqueous disodium citrate solutions as a function of concentration at 298-313.15K using DSA 5000M. The experimental data were further used to compute various acoustical parameters such as adiabatic compressibility, ß, apparent molar compressibility, ∅(k), partial molar compressibility, ∅(0)k, transfer adiabatic compressibility, Φ(0)(ktr), constant, Sk, and the hydration number, nH. The transfer adiabatic compressibility shows the supremacy of hydrophilic-ionic interactions under hydrophobic-ionic interactions. The above-mentioned parameters are relevant for the efficiency of mediation in pharmacology and can be interpreted in terms of structure-making or structure-breaking ability of these amino acids in the solution.

Useful ethnophytomedicinal recipes of angiosperms used against diabetes in South East Asian Countries (India, Pakistan & Sri Lanka).

This paper is based on data recorded from various literatures pertaining to ethnophytomedicinal recipes used against diabetes in South East Asia (India, Pakistan and Srilanka). Traditional plant treatments have been used throughout the world for the therapy of diabetes mellitus. In total 419 useful phytorecipes of 270 plant species belonging to 74 Angiospermic families were collected. From the review it was revealed that plants showing hypoglycemic potential mainly belong to the families, Cucurbitaceae (16 spp.), Euphorbiaceae (15 spp.), Caesalpiniaceae and Papilionaceae (13 spp. each), Moraceae (11 spp.), Acanthaceae (10 spp.), Mimosaceae (09 spp.), Asteraceae, Malvaceae and Poaceae (08 spp. each), Hippocrateaceae, Rutaceae and Zingiberaceae (07 spp. each), Apocynaceae, Asclepiadaceae and Verbenaceae (06 spp. each), Apiaceae, Convolvulaceae, Lamiaceae, Myrtaceae, Solanaceae (05 spp.each). The most active plants are Syzigium cumini (14 recipes), Phyllanthus emblica (09 recipes), Centella asiatica and Momordica charantia (08 recipes each), Azadirachta indica (07 recipes), Aegle marmelos, Catharanthus roseus, Ficus benghalensis, Ficus racemosa, Gymnema sylvestre (06 recipes each), Allium cepa, A. sativum, Andrographis paniculata, Curcuma longa (05 recipes each), Citrullus colocynthis, Justicia adhatoda, Nelumbo nucifera, Tinospora cordifolia, Trigonella foenum-graecum, Ziziphus mauritiana and Wattakaka volubilis (4 recipes each). These traditional recipes include extracts, leaves, powders, flour, seeds, vegetables, fruits and herbal mixtures. Data inventory consists of botanical name, recipe, vernacular name, English name. Some of the plants of the above data with experimentally confirmed antidiabetic properties have also been recorded. More investigations must be carried out to evaluate the mechanism of action of diabetic medicinal plants. Toxicity of these plants should also be explained. Scientific validation of these recipes may help in discovering new drugs from these medicinal plants for diabetes.

Medicinal uses of honey (Quranic medicine) and its bee flora from Dera Ismail Khan District, KPK, Pakistan.

This study was carried out during 2005-2008 to identify existing plant species visited by workers of honeybees for nectar and pollen collection in Dera Ismail Khan (D.I.Khan) District, Pakistan. The honeybee species investigated in the area were, rock bee (Apis dorsata F.), little bee (A. florea F.) and European honeybee (A. mellifera L.). A detailed list of 86 plant species both wild and cultivated was prepared, out of which 12 species, Phulai (Acacia modesta Wall.), Sarsoon (Brassica campestris L.), Kaghzi nimboo (Citrus aurantifolia L.), Khatta (C. medica L.), Malta (C. sinensis (L.) Osbeck.), Shisham (Dalbergia sissoo Roxb.), Date (Phoenix dactylifera L.), Barseen (Trifolium alexandrianum L.), Shaftal (T. resupinatum L), Makai (Zea mays L.), Ber (Zizyphus mauritiana Lam.) and Jher beri (Z. numularia (Burm. f.) Wight & Arn.,) were found as major sources (table 1) for the production of surplus honey in a year at different localities in the District. Among the minor sources various plant species were included (table 2). These plants fill the flowering gaps between the major sources in various parts of the year and help in continuous supply of food to honey bees.

Genetic determinants of major blood lipids in Pakistanis compared with Europeans.

BACKGROUND: Evidence is sparse about the genetic determinants of major lipids in Pakistanis. METHODS AND RESULTS: Variants (n=45 000) across 2000 genes were assessed in 3200 Pakistanis and compared with 2450 Germans using the same gene array and similar lipid assays. We also did a meta-analysis of selected lipid-related variants in Europeans. Pakistani genetic architecture was distinct from that of several ethnic groups represented in international reference samples. Forty-one variants at 14 loci were significantly associated with levels of HDL-C, triglyceride, or LDL-C. The most significant lipid-related variants identified among Pakistanis corresponded to genes previously shown to be relevant to Europeans, such as CETP associated with HDL-C levels (rs711752; P<10(-13)), APOA5/ZNF259 (rs651821; P<10(-13)) and GCKR (rs1260326; P<10(-13)) with triglyceride levels; and CELSR2 variants with LDL-C levels (rs646776; P<10(-9)). For Pakistanis, these 41 variants explained 6.2%, 7.1%, and 0.9% of the variation in HDL-C, triglyceride, and LDL-C, respectively. Compared with Europeans, the allele frequency of rs662799 in APOA5 among Pakistanis was higher and its impact on triglyceride concentration was greater (P-value for difference <10(-4)). CONCLUSIONS: Several lipid-related genetic variants are common to Pakistanis and Europeans, though they explain only a modest proportion of population variation in lipid concentration. Allelic frequencies and effect sizes of lipid-related variants can differ between Pakistanis and Europeans.

Experimental and Monte Carlo simulation studies of open cylindrical radon monitoring device using CR-39 detector.

There are several methods of measuring radon concentrations but nuclear track detector cylindrical dosimeters are widely employed. In this investigation, the consequence of effective volumes of the dosimeters on the registration of alpha tracks in a CR-39 detector was studied. In a series of experiments an optimum radius for a CR-39-based open cylindrical radon dosimeter was found to be about 3 cm. Monte Carlo simulation techniques have been employed to verify the experimental results. In this context, a computer code Monte Carlo simulation dosimetry (MOCSID) was developed. Monte Carlo simulation experiments gave the optimum radius of the dosimeters as 3.0 cm. The experimental results are in good agreement with those obtained by Monte Carlo design calculations. In addition to this, plate-out effects of radon progeny were also studied. It was observed that the contribution of radon progeny (218Po and 214Po) plated-out on the wall of the dosimeters increases with an increase of dosimeter radii and then decrease to 0 at a radius of about 3 cm if a point detector has been installed at the center of the dosimeter base. In the code MOCSID different types of random number generators were employed. The results of this research are very useful for designing an optimum size of radon dosimeters.