On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers.

Chemical amplification is a well-established concept in photoresist technology, wherein one photochemical event leads to a cascade of follow-up reactions that facilitate a controlled change in the solubility of a polymer. Herein, we transfer this concept to dynamic polymer networks to liberate both catalyst and functional groups required for bond exchange reactions under UV irradiation. For this, we exploit a photochemically generated acid to catalyse a deprotection reaction of an acid-labile tert-butoxycarbonyl group, which is employed to mask the hydroxy groups of a vinyl monomer. At the same time, the released acid serves as a catalyst for thermo-activated transesterifications between the deprotected hydroxy and ester moieties. Introduced in an orthogonally cured (450 nm) thiol-click photopolymer, this approach allows for a spatio-temporally controlled activation of bond exchange reactions, which is crucial in light of the creep resistance versus reflow ability trade-off of dynamic polymer networks.

Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications.

A novel strategy allowing temporal control of dynamic bond exchange in covalently crosslinked polymer networks via latent transesterification catalysts is introduced. Obtained by a straightforward air- and water-tolerant synthesis, the latent catalyst is designed for an irreversible temperature-mediated release of a strong organic base. Its long-term inactivity at temperatures below 50 °C provides the unique opportunity to equip dynamic covalent networks with creep resistance and high bond-exchange rates, once activated. The presented thermally latent base catalyst is conveniently introducible in readily available building blocks and, as proof of concept, applied in a radically polymerized thiol-ene network. Light-mediated curing is used for 3D-printing functional objects, on which the possibility of spatially controlled reshaping and welding based on dynamic transesterification is illustrated. Since the catalyst is thermally activated, limitations regarding sample geometry and optical transparency do not apply, which facilitates a transfer to well-established industrial technologies. Consequently, fiber-reinforced and highly filled magneto-active thiol-ene polymer composites are fabricated by a thermal curing approach. The on-demand activation of dynamic transesterification is demonstrated by (magneto-assisted) reshaping experiments, highlighting a wide range of potential future applications offered by the presented concept.

Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil.

Vitrimers brought new properties in thermosets by allowing their reshaping, self-healing, reprocessing, and network rearrangement without changing structural integrity. In this study, epoxidized castor oil (ECO) was successfully used for the straightforward synthesis of a bio-based solvent-free vitrimer. The synthesis was based on a UV-curing process, which proceeded at low temperatures in the absence of any solvents, and within a short time. Real time Fourier-transformed infrared spectroscopy and photo-DSC were exploited to monitor the cationic photocurable process. The UV-cured polymer networks were able to efficiently undergo thermo-activated bond exchange reactions due to the presence of dibutyl phosphate as a transesterification catalyst. Mechanical properties, thermal resistance, glass transition temperature, and stress relaxation were investigated as a function of the amount of transesterification catalyst. Mechanical properties were determined by both DMTA and tensile tests. Glass transition temperature (Tg) was evaluated by DMTA. Thermal stability was assessed by thermogravimetric analysis, whilst vitrimeric properties were studied by stress relaxation experiments. Overall, the ECO-based vitrimer showed high thermal resistance (up to 200 °C) and good mechanical properties (elastic modulus of about 10 MPa) and can therefore be considered as a promising starting point for obtaining more sustainable vitrimers.

Introduction of Photolatent Bases for Locally Controlling Dynamic Exchange Reactions in Thermo-Activated Vitrimers.

Vitrimers exhibit a covalently crosslinked network structure, as is characteristic of classic thermosetting polymers. However, they are capable of rearranging their network topology by thermo-activated associative exchange reactions when the topology freezing transition temperature (Tv ) is exceeded. Despite the vast number of developed vitrimers, there is a serious lack of methods that enable a (spatially) controlled onset of these rearrangement reactions above Tv . Herein, we highlight the localized release of the efficient transesterification catalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) by the UV-induced cleavage of a photolatent base within a covalently crosslinked thiol-epoxy network. Demonstrated with stress relaxation measurements conducted well above the network's Tv , only the controlled release of TBD facilitates the immediate onset of transesterification in terms of a viscoelastic flow. Moreover, the spatially resolved UV-mediated photoactivation of vitrimeric properties is confirmed by permanent shape changes induced locally in the material.

Global trends in clinical trials involving pluripotent stem cells: a systematic multi-database analysis.

Pluripotent stem cells (PSCs) hold great potential for novel therapeutic approaches to regenerate or replace functionally impaired tissues. Since the introduction of the induced pluripotent stem cell technology in 2006, the number of scientific publications on this topic has constantly been increasing. However, so far no therapy based on PSCs has found its way into routine clinical use. In this study, we examined research trends related to clinical trials involving PSCs based on data obtained from ClinicalTrials.gov, the ICTRP database from the World Health Organization, as well as from a search of all individual databases that are included in the ICTRP using a multistep search algorithm. Following a stringent inclusion/exclusion procedure 131 studies remained that could be classified as clinical trials involving PSCs. The magnitude of these studies (77.1%) was observational, which implies that no cells were transplanted into patients, and only a minority of studies (22.9%) were of an interventional study type. The number of clinical trials involving induced pluripotent stem cells (iPSCs, 74.8%) was substantially higher than the one involving embryonic stem cells (ESCs, 25.2%). However, the picture changes completely when focusing on interventional studies, where in the majority (73.3%) of cases ESCs were used. Interestingly, also the study duration was significantly shorter for interventional versus observational trials (p = 0.002). When focusing on the geographical study regions, it became obvious that the greatest part of all observational trials was performed in the USA (41.6%) and in France (16.8%), while the magnitude of interventional studies was performed in Asian countries (China 36.7%, Japan 13.3%, South Korea 10.0%) and in the field of ophthalmology. In summary, these results indicate that only a limited number of trials were focusing on the actual transplantation of PSCs into patients in a rather narrow field of diagnoses. The future will tell us, if the iPSC technology will ultimately overcome the current challenges and will finally make its way into routine clinical use.