Surface chemical polishing and passivation minimize non-radiative recombination for all-perovskite tandem solar cells.

All-perovskite tandem solar cells have shown great promise in breaking the Shockley-Queisser limit of single-junction solar cells. However, the efficiency improvement of all-perovskite tandem solar cells is largely hindered by the surface defects induced non-radiative recombination loss in Sn-Pb mixed narrow bandgap perovskite films. Here, we report a surface reconstruction strategy utilizing a surface polishing agent, 1,4-butanediamine, together with a surface passivator, ethylenediammonium diiodide, to eliminate Sn-related defects and passivate organic cation and halide vacancy defects on the surface of Sn-Pb mixed perovskite films. Our strategy not only delivers high-quality Sn-Pb mixed perovskite films with a close-to-ideal stoichiometric ratio surface but also minimizes the non-radiative energy loss at the perovskite/electron transport layer interface. As a result, our Sn-Pb mixed perovskite solar cells with bandgaps of 1.32 and 1.25 eV realize power conversion efficiencies of 22.65% and 23.32%, respectively. Additionally, we further obtain a certified power conversion efficiency of 28.49% of two-junction all-perovskite tandem solar cells.

Buried interface molecular hybrid for inverted perovskite solar cells.

Perovskite solar cells with an inverted architecture provide a key pathway for commercializing this emerging photovoltaic technology because of the better power conversion efficiency and operational stability compared with the normal device structure. Specifically, power conversion efficiencies of the inverted perovskite solar cells have exceeded 25% owing to the development of improved self-assembled molecules1-5 and passivation strategies6-8. However, poor wettability and agglomeration of self-assembled molecules9-12 cause interfacial losses, impeding further improvement in the power conversion efficiency and stability. Here we report a molecular hybrid at the buried interface in inverted perovskite solar cells that co-assembled the popular self-assembled molecule [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) with the multiple aromatic carboxylic acid 4,4',4″-nitrilotribenzoic acid (NA) to improve the heterojunction interface. The molecular hybrid of Me-4PACz with NA could substantially improve the interfacial characteristics. The resulting inverted perovskite solar cells demonstrated a record certified steady-state efficiency of 26.54%. Crucially, this strategy aligns seamlessly with large-scale manufacturing, achieving one of the highest certified power conversion efficiencies for inverted mini-modules at 22.74% (aperture area 11.1 cm2). Our device also maintained 96.1% of its initial power conversion efficiency after more than 2,400 h of 1-sun operation in ambient air.

Recent Advances in Interface Engineering for Enhanced Open-Circuit Voltage Regulation in Perovskite Solar Cells.

In recent years, perovskite solar cells (PSCs) have attracted significant attention due to their excellent photoelectric properties. However, several key performance parameters of these devices still fall short of their theoretical limits. Among these parameters, the regulation of open-circuit voltage (VOC) has been a focal point of intensive research efforts, playing a pivotal role in advancing the efficiency of PSCs. This review first provides an overview of the generation and loss mechanism of VOC. It then discusses the significance of interface engineering in VOC regulation. Recent developments in high-efficiency PSCs realized via interface engineering have been summarized and categorized into three key areas: surface modification, interface structure optimization, and surface dimensional engineering. Finally, a comprehensive summary of past research in this domain and offered insights into the future prospects of enhancing VOC in PSCs is provided.

Modulation of perovskite degradation with multiple-barrier for light-heat stable perovskite solar cells.

The long-term stability of perovskite solar cells remains one of the most important challenges for the commercialization of this emerging photovoltaic technology. Here, we adopt a non-noble metal/metal oxide/polymer multiple-barrier to suppress the halide consumption and gaseous perovskite decomposition products release with the chemically inert bismuth electrode and Al2O3/parylene thin-film encapsulation, as well as the tightly closed system created by the multiple-barrier to jointly suppress the degradation of perovskite solar cells, allowing the corresponding decomposition reactions to reach benign equilibria. The resulting encapsulated formamidinium cesium-based perovskite solar cells with multiple-barrier maintain 90% of their initial efficiencies after continuous operation at 45 °C for 5200 h and 93% of their initial efficiency after continuous operation at 75 °C for 1000 h under 1 sun equivalent white-light LED illumination.

Enhancing Hole Transport of Quantum-Dot Light-Emitting Diodes by a Cruciform Oligothiophene for Effective p-Type Doping.

Effective p-type doping is essential to enhance hole transport and balance electron-hole injection in quantum dot light-emitting diodes (QLEDs). Here, an oligothiophene material is adopted as a p-type dopant in the hole-transport layer, considering its cruciform cross-center structure, precise molecular weight, and high purity. Compared with the dopant-free counterpart, hole transport capability at the optimal doping level exhibits a significant improvement, producing a boosted external quantum efficiency (EQE) and luminance up to 20.8%, 213 439 cd m-2 , respectively, among the highest reported on the red-light emission. The work indicates the potential applications of oligothiophene material in red light-emitting devices.