RESUMO
Resolving the sluggish transport kinetics of divalent Zn2+ in the cathode lattice and improving mass-loading performance are crucial for advancing the zinc-ion batteries (AZIBs) application. Herein, PEO-LiV3O8 superlattice nanosheets (PEO-LVO) with expanded interlayer spacing (1.16 nm) are fabricated to provide a high-rate, stable lifetime, and large mass-loading cathode. The steady in-plane expansion without shrinkage after the first cycle, but reversible H+/Zn2+ co-insertion in PEO-LVO are demonstrated by operando synchrotron X-ray diffraction and ex situ characterizations. Moreover, the large capacity of PEO-LVO is traced back to the optimized Zn2+ insertion chemistry with increased Zn2+ storage ratio, which is facilitated by the interlayer PEO in lowering the Zn2+ diffusion barrier and increased number of active sites from additional interfaces, as anticipated by density functional theory. Due to the optimized ion insertion resulting in stalled interfacial byproducts and rapid kinetics, PEO-LVO achieves excellent high mass-loading performance (areal capacity up to 6.18 mAh cm-2 for freestanding electrode with 24 mg cm-2 mass-loading and 2.8 mAh cm-2 at 130 mA cm-2 for conventional electrode with 27 mg cm-2 mass-loading). As a proof-of-concept, the flexible all-solid-state fiber-shaped AZIBs with high mass-loading woven into a fabric can power an electronic watch, highlighting the application potential of PEO-LVO cathode.
RESUMO
A block-correlated coupled cluster method with up to four-pair correlation based on the generalized valence bond wave function (GVB-BCCC4) is first implemented, which offers an alternative method for electronic structure calculations of strongly correlated systems. We developed some techniques to derive a set of compact and cost-effective equations for GVB-BCCC4, which include the definition of n-block (n = 1-4) Hamiltonian matrices, the combination of excitation operators, and the definition of independent amplitudes. We then applied the GVB-BCCC4 method to investigate several potential energy surfaces of strongly correlated systems with singlet ground states. Our calculations demonstrate that the GVB-BCCC4 method can provide nearly exact static correlation energies as the density matrix renormalization group method (on the basis of the same GVB orbitals). This work highlights the significance of four-pair correlation in quantitative descriptions of static correlation energy for strongly correlated systems.
RESUMO
Conversion-type electrodes offer a promising multielectron transfer alternative to intercalation hosts with potentially high-capacity release in batteries. However, the poor cycle stability severely hinders their application, especially in aqueous multivalence-ion systems, which can fundamentally impute to anisotropic ion diffusion channel collapse in pristine crystals and irreversible bond fracture during repeated conversion. Here, an amorphous bismuth sulfide (a-BS) formed in situ with unprecedentedly self-controlled moderate conversion Cu2+ storage is proposed to comprehensively regulate the isotropic ion diffusion channels and highly reversible bond evolution. Operando synchrotron X-ray diffraction and substantive verification tests reveal that the total destruction of the BiâS bond and unsustainable deep alloying are fully restrained. The amorphous structure with robust ion diffusion channels, unique self-controlled moderate conversion, and high electrical conductivity discharge products synergistically boosts the capacity (326.7 mAh g-1 at 1 A g-1 ), rate performance (194.5 mAh g-1 at 10 A g-1 ), and long-lifespan stability (over 8000 cycles with a decay rate of only 0.02 per cycle). Moreover, the a-BS Cu2+ âZn2+ hybrid ion battery can well supply a stable energy density of 238.6 Wh kg-1 at 9760 W kg-1 . The intrinsically high-stability conversion mechanism explored on amorphous electrodes provides a new opportunity for advanced aqueous storage.
RESUMO
The challenge with aqueous zinc-ion batteries (ZIBs) lies in finding suitable cathode materials that can provide high capacity and fast kinetics. Herein, two-dimensional topological Bi2 Se3 with acceptable Bi-vacancies for ZIBs cathode (Cu-Bi2-x Se3 ) is constructed through one-step hydrothermal process accompanied by Cu heteroatom introduction. The cation-deficient Cu-Bi2-x Se3 nanosheets (≈4 nm) bring improved conductivity from large surface topological metal states contribution and enhanced bulk conductivity. Besides, the increased adsorption energy and reduced Zn2+ migration barrier demonstrated by density-functional theory (DFT) calculations illustrate the decreased Coulombic ion-lattice repulsion of Cu-Bi2-x Se3 . Therefore, Cu-Bi2-x Se3 exhibits both enhanced ion and electron transport capability, leading to more carrier reversible insertion proved by in situ synchrotron X-ray diffraction (SXRD). These features endow Cu-Bi2-x Se3 with sufficient specific capacity (320 mA h g-1 at 0.1 A g-1 ), high-rate performance (97 mA h g-1 at 10 A g-1 ), and reliable cycling stability (70 mA h g-1 at 10 A g-1 after 4000 cycles). Furthermore, quasi-solid-state fiber-shaped ZIBs employing the Cu-Bi2-x Se3 cathode demonstrate respectable performance and superior flexibility even under high mass loading. This work implements a conceptually innovative strategy represented by cation defect design in topological insulator cathode for achieving high-performance battery electrochemistry.
RESUMO
Electronic structure defines the conductivity and ion absorption characteristics of a functional electrode, significantly affecting the charge transfer capability in batteries, while it is rarely thought to be involved in mesoscopic volume and diffusion kinetics of the host lattice for promoting ion storage. Here, we first correlate the evolution in electronic structure of the Mo6S8 cathode with the ability to bound volume expansion and accelerate diffusion kinetics for high-performance aqueous Cu2+ storage. Operando synchrotron energy-dispersive X-ray absorption spectroscopy reveals that accumulative delocalized Mo 4d electrons enhance the Mo-Mo interaction with distinctly contracting and uniformizing Mo6 clusters during the reduction of Mo6S8, which potently restrain lattice expansion and release space to promote Cu2+ diffusion kinetics. Operando synchrotron X-ray diffraction and comprehensive characterizations further validate the structural and electrochemical properties induced by the Cu2+ intercalation electronic structure, endowing the Mo6S8 cathode a high specific capacity with small volume expansion, fast ions diffusion, and long-term cycling stability.
RESUMO
An equation-of-motion block-correlated coupled cluster method based on the generalized valence bond wave function (EOM-GVB-BCCC) is proposed to describe low-lying excited states for strongly correlated systems. The EOM-GVB-BCCC2b method with up to two-pair correlation has been implemented and tested for a few strongly correlated systems. For a water hexamer with stretched O-H bonds, which is beyond the capability of the CASSCF method, EOM-GVB-BCCC2b provides very close results as the density matrix renormalization group (DMRG). For four conjugated diradical species with triplet ground states, we found that their vertical S-T gaps from EOM-GVB-BCCC2b are also quite consistent with the DMRG results. This new method is expected to be a promising theoretical tool for describing the low-lying excited states of strongly correlated systems with large active spaces.
RESUMO
Aqueous zinc batteries (ZIBs) have attracted considerable attention in recent years because of their high safety and eco-friendly features. Numerous studies have shown that adding Mn2+ salts to ZnSO4 electrolytes enhanced overall energy densities and extended the cycling life of Zn/MnO2 batteries. It is commonly believed that Mn2+ additives in the electrolyte inhibit the dissolution of MnO2 cathode. To better understand the role of Mn2+ electrolyte additives, the ZIB using a Co3 O4 cathode instead of MnO2 in 0.3 m MnSO4 + 3 m ZnSO4 electrolyte is built to avoid interference from MnO2 cathode. As expected, the Zn/Co3 O4 battery exhibits electrochemical characteristics nearly identical to those of Zn/MnO2 batteries. Operando synchrotron X-ray diffraction (XRD), ex situ X-ray absorption spectroscopy (XAS), and electrochemical analyses are carried out to determine the reaction mechanism and pathway. This work demonstrates that the electrochemical reaction occurring at cathode involves a reversible Mn2+ /MnO2 deposition/dissolution process, while a chemical reaction of Zn2+ /Zn4 SO4 (OH)6 â5H2 O deposition/dissolution is involved during part of the charge/discharge cycle due to the change in the electrolyte environment. The reversible Zn2+ /Zn4 SO4 (OH)6 â5H2 O reaction contributes no capacity and lowers the diffusion kinetics of the Mn2+ /MnO2 reaction, which prevents the operation of ZIBs at high current densities.
RESUMO
Exploring stable and durable cathodes for cost-effective reversible aqueous batteries is highly desirable for grid-scale energy storage applications, but significant challenges remain. Herein, we disclosed an ultrastable Cu2+ intercalation chemistry in mass-produced exfoliated NbS2 nanosheets to build ultralong lifespan aqueous batteries with cost advantages. Anisotropic interplanar expansion of NbS2 lattices balanced dynamic Cu2+ incorporation and the highly reversible redox reaction of Nb4+/Nb(4-δ)+ couple were illuminated by operando synchrotron X-ray diffraction and energy dispersive X-ray absorption spectroscopy, affording an extraordinary capacity of approximately 317 mAh g-1 at 1 A g-1 and a good stability of 92.2% capacity retention after 40000 cycles at 10 A g-1. Impressively, a budget NbS2||Fe hybrid ion cell involving an aqueous electrolyte/Fe-metal anode is established and provides a reliable energy supply of 225.4 Wh kg-1 at 750 W kg-1, providing insights for building advanced aqueous battery systems for large-scale applications.
RESUMO
An optimized implementation of block-correlated coupled cluster theory based on the generalized valence bond wave function (GVB-BCCC) for the singlet ground state of strongly correlated systems is presented. The GVB-BCCC method with two-pair correlation (GVB-BCCC2b) or up to three-pair correlation (GVB-BCCC3b) will be the focus of this work. Three major techniques have been adopted to dramatically accelerate GVB-BCCC2b and GVB-BCCC3b calculations. First, the GVB-BCCC2b and GVB-BCCC3b codes are noticeably optimized by removing redundant calculations. Second, independent amplitudes are identified by constraining excited configurations to be pure singlet states and only independent amplitudes need to be solved. Third, an incremental updating scheme for the amplitudes in solving the GVB-BCCC equations is adopted. With these techniques, accurate GVB-BCCC3b calculations are now accessible for systems with relatively large active spaces (50 electrons in 50 orbitals) and GVB-BCCC2b calculations are affordable for systems with much larger active spaces. We have applied GVB-BCCC methods to investigate three typical kinds of systems: polyacenes, pentaprismane, and [Cu2O2]2+ isomers. For polyacenes, we demonstrate that GVB-BCCC3b can capture more than 94% of the total correlation energy even for 12-acene with 50 π electrons. For the potential energy curve of simultaneously stretching 15 C-C bonds in pentaprismane, our calculations show that the GVB-BCCC3b results are quite close to the results from the density matrix renormalization group (DMRG) over the whole range. For two dinuclear copper oxide isomers, their relative energy predicted by GVB-BCCC3b is also in good accord with the DMRG result. All calculations show that the inclusion of three-pair correlation in GVB-BCCC is critical for accurate descriptions of strongly correlated systems.
RESUMO
Engineering multifunctional superstructure cathodes to conquer the critical issue of sluggish kinetics and large volume changes associated with divalent Zn-ion intercalation reactions is highly desirable for boosting practical Zn-ion battery applications. Herein, it is demonstrated that a MoS2/C19H42N+ (CTAB) superstructure can be rationally designed as a stable and high-rate cathode. Incorporation of soft organic CTAB into a rigid MoS2 host forming the superlattice structure not only effectively initiates and smooths Zn2+ transport paths by significantly expanding the MoS2 interlayer spacing (1.0 nm) but also endows structural stability to accommodate Zn2+ storage with expansion along the MoS2 in-plane, while synchronous shrinkage along the superlattice interlayer achieves volume self-regulation of the whole cathode, as evidenced by in situ synchrotron X-ray diffraction and substantial ex situ characterizations. Consequently, the optimized superlattice cathode delivers high-rate performance, long-term cycling stability (â¼92.8% capacity retention at 10 A g-1 after 2100 cycles), and favorable flexibility in a pouch cell. Moreover, a decent areal capacity (0.87 mAh cm-2) is achieved even after a 10-fold increase of loading mass (â¼11.5 mg cm-2), which is of great significance for practical applications. This work highlights the design of multifunctional superlattice electrodes for high-performance aqueous batteries.
RESUMO
Safe and high-energy-density rechargeable batteries are increasingly indispensable in the pursuit of a wireless and fossil-free society. Advancements in present battery technologies and the investigation of next-generation batteries highly depend on the ever-deepening fundamental understanding and the rational designs of working electrodes, electrolytes, and interfaces. However, accurately analyzing energy materials and interfaces is severely hindered by their intrinsic limitations of air and electron-beam sensitivity, which restrains the research of energy materials in a low-efficiency trial-and-error paradigm. The emergence of cryogenic electron microscopy (cryo-EM) has enabled the nondestructive characterization of air- and electron-beam sensitive energy materials in the microscale and nanoscale, and even at atomic resolutions, affording closer insights into the primary chemistry and physics of working batteries. Herein, the development of cryo-EM and the applications in detecting energy materials are reviewed and analyzed from its overwhelming advantages in disclosing the underlying mystery of energy materials. Critical sample preparation methods as the precondition for cryo-EM are compared, which strongly affect the characterization accuracy. Furthermore, new developments in the analysis of energy materials, especially bulk electrodes and interfaces in lithium metal batteries, are presented according to different functions of cryo-EM. Finally, future directions of cryo-EM for analyzing energy materials are prospected.
RESUMO
Metallic bismuth (Bi) has been widely explored as remarkable anode material in alkali-ion batteries due to its high gravimetric/volumetric capacity. However, the huge volume expansion up to ≈406% from Bi to full potassiation phase K3 Bi, inducing the slow kinetics and poor cycling stability, hinders its implementation in potassium-ion batteries (PIBs). Here, facile strategy is developed to synthesize hierarchical bismuth nanodots/graphene (BiND/G) composites with ultrahigh-rate and durable potassium ion storage derived from an in situ spontaneous reduction of sodium bismuthate/graphene composites. The in situ formed ultrafine BiND (≈3 nm) confined in graphene layers can not only effectively accommodate the volume change during the alloying/dealloying process but can also provide high-speed channels for ionic transport to the highly active BiND. The BiND/G electrode provides a superior rate capability of 200 mA h g-1 at 10 A g-1 and an impressive reversible capacity of 213 mA h g-1 at 5 A g-1 after 500 cycles with almost no capacity decay. An operando synchrotron radiation-based X-ray diffraction reveals distinctively sharp multiphase transitions, suggesting its underlying operation mechanisms and superiority in potassium ion storage application.
RESUMO
Two-dimensional (2D) antimonene is a promising anode material in sodium-ion batteries (SIBs) because of its high theoretical capacity of 660 mAh g-1 and enlarged surface active sites. However, its Na storage properties and sodiation/desodiation mechanism have not been fully explored. Herein, we propose the sodiation/desodiation reaction mechanism of 2D few-layer antimonene (FLA) based on results acquired by in situ synchrotron X-ray diffraction, ex situ selected-area electron diffraction, and theoretical simulations. Our study shows that the FLA undergoes anisotropic volume expansion along the a/b plane and exhibits reversible crystalline phase evolution (Sb â NaSb â Na3Sb) during cycling. Density-functional theory calculations demonstrate that the FLA has a small Na-ion diffusion barrier of 0.14 eV. The FLA delivers a larger capacity of 642 mAh g-1 at 0.1 C (1 C = 660 mA g-1) and a high rate capability of 429 mAh g-1 at 5 C and maintains a stable capacity of 620 mA g-1 at 0.5 C with 99.7% capacity retention from the 10th to the 150th cycle. Considering the 660 mAh g-1 theoretical capacity of Sb, the electrochemical utilization of Sb atoms of FLA is as high as 93.9% at a rate of 0.5 C for over 150 cycles, which is the highest capacity and Sb utilization ratio reported so far. Our study discloses the Na storage mechanism of 2D FLA, boosting promising applications of 2D materials for advanced SIBs.
RESUMO
A nickel hexacyanoferrate (NiHCF)/carbon composite is prepared to realize reduced structure vacancies and enhanced conductivity simultaneously. The resultant composite as a cathode material exhibits good capacity retentions both for rate capability (93% of that at 0.1 A g-1 for 2 A g-1) and cycle stability (94% after 900 cycles at 0.5 A g-1). This feature is also kept in an aqueous hybrid energy storage device, after coupling with rGO as the anode. After 5000 cycles at 2 A g-1, 94% of the initial capacity is preserved, exhibiting extraordinary stability at high rates.
RESUMO
Vanadium pentoxide (V2O5) has attracted interesting attention as cathode material for LIBs because of its stable crystal structure and high theoretical specific capacity. However, the low rate performance and poor long-term cycling stability of V2O5 limit its applications. In order to improve its battery performance, various V2O5 hollow microspheres including a yolk-shell structure, double-shell structure, triple-shell structure, and hierarchical hollow superstructures have been selectively prepared. The obtained hierarchical V2O5 hollow microspheres (HVHS) exhibit a high capacity of 123 mAh g(-1) at 20 C (1 C = 147 mA g(-1)) in the range of 2.5-4.0 V, and 73.5 mAh g(-1) can be reached after 3000 cycles. HVHS also display good cycling performance in the range of 2.0-4.0 V. Moreover, the V2O5//Li4Ti5O12 full cell was successfully assembled, which exhibits an excellent performance of 139.5 mAh g(-1) between 1.0 and 2.5 V at a current density of 147 mA g(-1), and a high capacity of 106 mAh g(-1) remained after 100 cycles, indicating the good cycling performance and promising application of the full cell.
RESUMO
Three-dimensional (3D) hierarchical nanostructures have been demonstrated as one of the most ideal electrode materials in energy storage systems due to the synergistic combination of the advantages of both nanostructures and microstructures. In this study, the honeycomb-like mesoporous NiO microspheres as promising cathode materials for supercapacitors have been achieved using a hydrothermal reaction, followed by an annealing process. The electrochemical tests demonstrate the highest specific capacitance of 1250 F g(-1) at 1 A g(-1). Even at 5 A g(-1), a specific capacitance of 945 F g(-1) with 88.4% retention after 3500 cycles was obtained. In addition, the 3D porous graphene (reduced graphene oxide, rGO) has been prepared as an anode material for supercapacitors, which displays a good capacitance performance of 302 F g(-1) at 1 A g(-1). An asymmetric supercapacitor has been successfully fabricated based on the honeycomb-like NiO and rGO. The asymmetric supercapacitor achieves a remarkable performance with a specific capacitance of 74.4 F g(-1), an energy density of 23.25 Wh kg(-1), and a power density of 9.3 kW kg(-1), which is able to light up a light-emitting diode.