RESUMO
Understanding the dynamics of carbon and water vapor fluxes in arid inland river basin ecosystems is essential for predicting and assessing the regional carbon-water budget amid climate change. However, studies aiming to unravel the mechanisms driving the variations and coupling process of regional carbon-water budget in a changing environment in arid regions are limited. Here, we used the eddy covariance technique to analyze the relationship between CO2 and H2O fluxes in three typical ecosystems across the upper, middle, and lower reaches of an arid inland river basin in Northwestern China. Our results showed that all ecosystems acted as carbon sinks, with the alpine swamp meadow, cropland, and desert shrubland sequestrating -300.2 ± 0.01, -644.8 ± 2.9, and - 203.7 ± 22.5 g C m-2 yr-1, respectively. Air temperature (Ta) primarily controlled daily gross primary productivity (GPP) and net ecosystem CO2 exchange (NEE) in the irrigated cropland during the growing season, while soil temperature (Ts) and vapor pressure deficit (VPD) regulated these parameters in the alpine swamp meadow and desert shrubland. Additionally, Ta and net radiation (Rn) controlled daily evapotranspiration (ET) in cropland, while Ts and Rn regulated ET at other sites. Consequently, carbon and water vapor fluxes of all three ecosystems tended to be energy-limited during the growing season. The differential responses of carbon and water vapor fluxes in the upper, middle, and lower reaches of these ecosystems to biophysical factors determined their distinct coupling and variations in water use efficiency. Notably, the desert shrub ecosystem in the lower reach of the basin maintained a stable balance between carbon gain and water loss, indicating adaptation to aridity. This study provides valuable insights into the underlying mechanisms behind the changes in carbon and water vapor fluxes and water-use efficiency in arid river basin ecosystems.
RESUMO
Alpine grassland is the main vegetation on the Qinghai-Tibetan Plateau (QTP) and exhibits high sensitivity to extreme weather events. With global warming, extreme weather events are projected to become more frequent on the QTP. However, the impact of these extreme weather events on the carbon cycle of alpine grassland remains unclear. The long-term in-situ carbon fluxes data was collected from 2013 to 2022 at an alpine grassland site to examine the impact of extreme low air temperature (ELT) and reduced moisture (including air and soil) on carbon fluxes during the growing season. Our findings indicated that a significant increase in net ecosystem production (NEP) after 2019, with the average NEP increasing from 278.91 ± 43.27 g C m-2 year-1 during 2013-2018 to 415.45 ± 45.29 g C m-2 year-1 during 2019-2022. The ecosystem carbon use efficiency (CUE) increased from 0.38 ± 0.06 during 2013-2018 to 0.62 ± 0.11 during 2019-2022. By combining concurrently measured environmental factors and remote sensing data, we identified the factors responsible for the abrupt change in the NEP after 2019. This phenomenon was caused by an abrupt decrease in ecosystem respiration (Reco) after 2019, which resulted from the inhibition imposed by ELT and reduced moisture. In contrast, gross primary production (GPP) remained stable from 2013 to 2022, which was confirmed by the remotely sensed vegetation index. This study highlights that combined extreme weather events associated with climate change can significantly impact the NEP of alpine grassland, potentially affecting different carbon fluxes at different rates. These findings provide new insights into the mechanisms governing the carbon cycle of alpine grassland.
Assuntos
Ciclo do Carbono , Monitoramento Ambiental , Pradaria , Tibet , Mudança Climática , Temperatura Baixa , EcossistemaRESUMO
Resolving the sluggish transport kinetics of divalent Zn2+ in the cathode lattice and improving mass-loading performance are crucial for advancing the zinc-ion batteries (AZIBs) application. Herein, PEO-LiV3O8 superlattice nanosheets (PEO-LVO) with expanded interlayer spacing (1.16 nm) are fabricated to provide a high-rate, stable lifetime, and large mass-loading cathode. The steady in-plane expansion without shrinkage after the first cycle, but reversible H+/Zn2+ co-insertion in PEO-LVO are demonstrated by operando synchrotron X-ray diffraction and ex situ characterizations. Moreover, the large capacity of PEO-LVO is traced back to the optimized Zn2+ insertion chemistry with increased Zn2+ storage ratio, which is facilitated by the interlayer PEO in lowering the Zn2+ diffusion barrier and increased number of active sites from additional interfaces, as anticipated by density functional theory. Due to the optimized ion insertion resulting in stalled interfacial byproducts and rapid kinetics, PEO-LVO achieves excellent high mass-loading performance (areal capacity up to 6.18 mAh cm-2 for freestanding electrode with 24 mg cm-2 mass-loading and 2.8 mAh cm-2 at 130 mA cm-2 for conventional electrode with 27 mg cm-2 mass-loading). As a proof-of-concept, the flexible all-solid-state fiber-shaped AZIBs with high mass-loading woven into a fabric can power an electronic watch, highlighting the application potential of PEO-LVO cathode.
RESUMO
Circular RNAs (circRNAs) have emerged as regulators of cancer progression, including non-small cell lung cancer (NSCLC). Tanreqing (TRQ), a traditional Chinese medicine, is used clinically for respiratory diseases. RT-qPCR quantified circ-WDR78 expression in NSCLC cells. Cell growth, apoptosis, invasion, and migration were assessed by functional assays. RNA-binding protein immunoprecipitation (RIP), luciferase reporter, and RNA pull-down assays determined the competing endogenous RNA (ceRNA) network of circ-WDR78. The interaction between HIF1α and CD274 (PD-L1) promoter was analyzed by chromatin immunoprecipitation (ChIP). Circ-WDR78 expression was up-regulated in TRQ-treated NSCLC cells. Functionally, circ-WDR78 exhibited anti-tumor effects in these cells. Additionally, circ-WDR78 could also induce reactive oxygen species (ROS) accumulation by down-regulating HIF1α expression, promoting autophagy. Mechanistically, circ-WDR78 destabilizes HIF1α via the miR-1265/FBXW8 axis. TRQ-induced exosome secretion from NSCLC cells inhibits PD-L1 expression, preventing immune escape. We found that TRQ-treated NSCLC cells secrete exosomes to transmit circ-WDR78 to untreated NSCLC cells, inhibiting the malignancy of recipient tumor cells. In conclusion, TRQ inhibits NSCLC cell proliferation, invasion, and migration through exosomal circ-WDR78-mediated inactivation of the HIF1α signaling pathway, providing potential insight into TRQ injection for NSCLC treatment.Communicated by Ramaswamy H. Sarma.
RESUMO
Conversion-type electrodes offer a promising multielectron transfer alternative to intercalation hosts with potentially high-capacity release in batteries. However, the poor cycle stability severely hinders their application, especially in aqueous multivalence-ion systems, which can fundamentally impute to anisotropic ion diffusion channel collapse in pristine crystals and irreversible bond fracture during repeated conversion. Here, an amorphous bismuth sulfide (a-BS) formed in situ with unprecedentedly self-controlled moderate conversion Cu2+ storage is proposed to comprehensively regulate the isotropic ion diffusion channels and highly reversible bond evolution. Operando synchrotron X-ray diffraction and substantive verification tests reveal that the total destruction of the BiâS bond and unsustainable deep alloying are fully restrained. The amorphous structure with robust ion diffusion channels, unique self-controlled moderate conversion, and high electrical conductivity discharge products synergistically boosts the capacity (326.7 mAh g-1 at 1 A g-1 ), rate performance (194.5 mAh g-1 at 10 A g-1 ), and long-lifespan stability (over 8000 cycles with a decay rate of only 0.02 per cycle). Moreover, the a-BS Cu2+ âZn2+ hybrid ion battery can well supply a stable energy density of 238.6 Wh kg-1 at 9760 W kg-1 . The intrinsically high-stability conversion mechanism explored on amorphous electrodes provides a new opportunity for advanced aqueous storage.
RESUMO
Electronic structure defines the conductivity and ion absorption characteristics of a functional electrode, significantly affecting the charge transfer capability in batteries, while it is rarely thought to be involved in mesoscopic volume and diffusion kinetics of the host lattice for promoting ion storage. Here, we first correlate the evolution in electronic structure of the Mo6S8 cathode with the ability to bound volume expansion and accelerate diffusion kinetics for high-performance aqueous Cu2+ storage. Operando synchrotron energy-dispersive X-ray absorption spectroscopy reveals that accumulative delocalized Mo 4d electrons enhance the Mo-Mo interaction with distinctly contracting and uniformizing Mo6 clusters during the reduction of Mo6S8, which potently restrain lattice expansion and release space to promote Cu2+ diffusion kinetics. Operando synchrotron X-ray diffraction and comprehensive characterizations further validate the structural and electrochemical properties induced by the Cu2+ intercalation electronic structure, endowing the Mo6S8 cathode a high specific capacity with small volume expansion, fast ions diffusion, and long-term cycling stability.
RESUMO
Titanium selenide (TiSe2 ), a model transition metal chalcogenide material, typically relies on topotactic ion intercalation/deintercalation to achieve stable ion storage with minimal disruption of the transport pathways but has restricted capacity (<130 mAh g-1 ). Developing novel energy storage mechanisms beyond conventional intercalation to break capacity limits in TiSe2 cathodes is essential yet challenging. Herein, the ion storage properties of TiSe2 are revisited and an unusual thermodynamically stable twin topotactic/nontopotactic Cu2+ accommodation mechanism for aqueous batteries is unraveled. In situ synchrotron X-ray diffraction and ex situ microscopy jointly demonstrated that topotactic intercalation sustained the ion transport framework, nontopotactic conversion involved localized multielectron reactions, and these two parallel reactions are miraculously intertwined in nanoscale space. Comprehensive experimental and theoretical results suggested that the twin-reaction mechanism significantly improved the electron transfer ability, and the reserved intercalated TiSe2 structure anchored the reduced titanium monomers with high affinity and promoted efficient charge transfer to synergistically enhance the capacity and reversibility. Consequently, TiSe2 nanoflake cathodes delivered a never-before-achieved capacity of 275.9 mAh g-1 at 0.1 A g-1 , 93.5% capacity retention over 1000 cycles, and endow hybrid batteries (TiSe2 -Cu||Zn) with a stable energy supply of 181.34 Wh kg-1 at 2339.81 W kg-1 , offering a promising model for aqueous ion storage.
RESUMO
High-energy metal anodes for large-scale reversible batteries with inexpensive and nonflammable aqueous electrolytes promise the capability of supporting higher current density, satisfactory lifetime, nontoxicity, and low-cost commercial manufacturing, yet remain out of reach due to the lack of reliable electrode-electrolyte interphase engineering. Herein, in situ formed robust interphase on copper metal electrodes (CMEs) induced by a trace amount of potassium dihydrogen phosphate (0.05 m in 1 m CuSO4 -H2 O electrolyte) to fulfill all aforementioned requirements is demonstrated. Impressively, an unprecedented ultrahigh-speed copper plating/stripping capability is achieved at 100 mA cm-2 for over 12 000 cycles, corresponding to an accumulative areal capacity up to tens of times higher than previously reported CMEs. The use of solid-electrolyte interface-protection strategy brings at least an order of magnitude improvement in cycling stability for symmetric cells (Cu||Cu, 2800 h) and full batteries with CMEs using either sulfur cathodes (S||Cu, 1000 cycles without capacity decay) or zinc anodes (Cu||Zn with all-metal electrodes, discharge voltage ≈1.02 V). The comprehensive analysis reveals that the hydrophilic phosphate-rich interphase nanostructures homogenize copper-ion deposition and suppress nucleation overpotential, enabling dendrite-free CMEs with sustainability and ability to tolerate unusual-high power densities. The findings represent an elegant forerunner toward the promising goal of metal electrode applications.
RESUMO
A meta-analysis was performed to comprehensively assess the effects of video-assisted thoracoscopy on surgical site wound infection and wound pain in patients with lung cancer. Studies on video-assisted thoracoscopy for lung cancer were collected from PubMed, EMBASE, Cochrane Library, Web of Science, China National Knowledge Infrastructure, Chinese Biomedical Literature Database, and Wanfang database, from inception to January 2023. Two researchers independently screened the literature, extracted the data, and evaluated the quality of the included studies according to the inclusion and exclusion criteria. Meta-analysis was performed using RevMan 5.4 software. Thirty-one articles with a total of 3608 patients were included, with 1809 in the video-assisted thoracoscopy group and 1799 in the control group. Compared with the control group, video-assisted thoracoscopy significantly reduced surgical site wound infection (odds ratio: 0.22, 95% confidence interval [CI]: 0.14-0.33, P < .001) and surgical site wound pain at postoperative day 1 (standardised mean difference [SMD]: -0.90, 95% CI: -1.17 to -0.64, P < .001) and postoperative day 3 (SMD: -1.59, 95% CI: -2.25 to -0.92, P < .001). Thus, these results showed that video-assisted thoracoscopy may have beneficial outcomes by reducing surgical site wound infection and pain. However, owing to the large variation in sample sizes and some methodological shortcomings, further validation is needed in future studies with higher quality and larger sample sizes.
Assuntos
Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/cirurgia , Infecção da Ferida Cirúrgica/etiologia , Dor , Toracoscopia , ChinaRESUMO
Aqueous zinc batteries (ZIBs) have attracted considerable attention in recent years because of their high safety and eco-friendly features. Numerous studies have shown that adding Mn2+ salts to ZnSO4 electrolytes enhanced overall energy densities and extended the cycling life of Zn/MnO2 batteries. It is commonly believed that Mn2+ additives in the electrolyte inhibit the dissolution of MnO2 cathode. To better understand the role of Mn2+ electrolyte additives, the ZIB using a Co3 O4 cathode instead of MnO2 in 0.3 m MnSO4 + 3 m ZnSO4 electrolyte is built to avoid interference from MnO2 cathode. As expected, the Zn/Co3 O4 battery exhibits electrochemical characteristics nearly identical to those of Zn/MnO2 batteries. Operando synchrotron X-ray diffraction (XRD), ex situ X-ray absorption spectroscopy (XAS), and electrochemical analyses are carried out to determine the reaction mechanism and pathway. This work demonstrates that the electrochemical reaction occurring at cathode involves a reversible Mn2+ /MnO2 deposition/dissolution process, while a chemical reaction of Zn2+ /Zn4 SO4 (OH)6 â5H2 O deposition/dissolution is involved during part of the charge/discharge cycle due to the change in the electrolyte environment. The reversible Zn2+ /Zn4 SO4 (OH)6 â5H2 O reaction contributes no capacity and lowers the diffusion kinetics of the Mn2+ /MnO2 reaction, which prevents the operation of ZIBs at high current densities.
RESUMO
Exploring stable and durable cathodes for cost-effective reversible aqueous batteries is highly desirable for grid-scale energy storage applications, but significant challenges remain. Herein, we disclosed an ultrastable Cu2+ intercalation chemistry in mass-produced exfoliated NbS2 nanosheets to build ultralong lifespan aqueous batteries with cost advantages. Anisotropic interplanar expansion of NbS2 lattices balanced dynamic Cu2+ incorporation and the highly reversible redox reaction of Nb4+/Nb(4-δ)+ couple were illuminated by operando synchrotron X-ray diffraction and energy dispersive X-ray absorption spectroscopy, affording an extraordinary capacity of approximately 317 mAh g-1 at 1 A g-1 and a good stability of 92.2% capacity retention after 40000 cycles at 10 A g-1. Impressively, a budget NbS2||Fe hybrid ion cell involving an aqueous electrolyte/Fe-metal anode is established and provides a reliable energy supply of 225.4 Wh kg-1 at 750 W kg-1, providing insights for building advanced aqueous battery systems for large-scale applications.
RESUMO
The root rot disease caused by Fusarium oxysporum f. sp. ginseng is one of the most destructive diseases of ginseng, an economically important herb. However, little is known about the pathogen's toxin biosynthesis or the molecular mechanisms regulating infection of ginseng. In this study we identified and functionally characterized the FoRSR1 gene that encodes a Ras-related (RSR) small GTPase homologous to yeast Rsr1 in F. oxysporum f. sp. ginseng. Disruption of FoRSR1 resulted in a significant reduction in mycelial dry weight in liquid cultures, although vegetative growth rate was not affected on culture plates. Notably, the Forsr1 mutant exhibited blunted and swollen hyphae with multi-nucleated compartments. It produced fewer and morphologically abnormal conidia and was defective in chlamydospore formation. In infection assays with ginseng roots, the Forsr1 mutant was significantly less virulent and caused only limited necrosis at the wounding sites. Deletion of FoRSR1 also affected pigmentation, autophagy, and production of fusaric acid. Furthermore, the expression of many candidate genes involved in secondary metabolism was significantly downregulated in the mutant, suggesting that FoRSR1 is also important for secondary metabolism. Overall, our results indicated that FoRSR1 plays important roles in conidiation, vacuolar morphology, secondary metabolism, and pathogenesis in F. oxysporum f. sp. ginseng.
Assuntos
Fusarium , Panax , Virulência/genética , Ácido Fusárico/metabolismo , Doenças das Plantas , Saccharomyces cerevisiaeRESUMO
Pursuing conversion-type cathodes with high volumetric capacity that can be used in aqueous environments remains rewarding and challenging. Tellurium (Te) is a promising alternative electrode due to its intrinsic attractive electronic conductivity and high theoretical volumetric capacity yet still to be explored. Herein, the kinetically/thermodynamically co-dominat copper-tellurium (Cu-Te) alloying phase-conversion process and corresponding oxidation failure mechanism of tellurium are investigated using in situ synchrotron X-ray diffraction and comprehensive ex situ characterization techniques. By virtue of the fundamental insights into the tellurium electrode, facile and precise electrolyte engineering (solvated structure modulation or reductive antioxidant addition) is implemented to essentially tackle the dramatic capacity loss in tellurium, affording reversible aqueous Cu-Te conversion reaction with an unprecedented ultrahigh volumetric capacity of up to 3927 mAh cm-3 , a flat long discharge plateau (capacity proportion of ≈81%), and an extraordinary level of capacity retention of 80.4% over 2000 cycles at 20 A g-1 of which lifespan thousand-fold longer than Cu-Te conversion using CuSO4 -H2 O electrolyte. This work paves a significant avenue for expanding high-performance conversion-type cathodes toward energetic aqueous multivalent-ion batteries.
RESUMO
Engineering multifunctional superstructure cathodes to conquer the critical issue of sluggish kinetics and large volume changes associated with divalent Zn-ion intercalation reactions is highly desirable for boosting practical Zn-ion battery applications. Herein, it is demonstrated that a MoS2/C19H42N+ (CTAB) superstructure can be rationally designed as a stable and high-rate cathode. Incorporation of soft organic CTAB into a rigid MoS2 host forming the superlattice structure not only effectively initiates and smooths Zn2+ transport paths by significantly expanding the MoS2 interlayer spacing (1.0 nm) but also endows structural stability to accommodate Zn2+ storage with expansion along the MoS2 in-plane, while synchronous shrinkage along the superlattice interlayer achieves volume self-regulation of the whole cathode, as evidenced by in situ synchrotron X-ray diffraction and substantial ex situ characterizations. Consequently, the optimized superlattice cathode delivers high-rate performance, long-term cycling stability (â¼92.8% capacity retention at 10 A g-1 after 2100 cycles), and favorable flexibility in a pouch cell. Moreover, a decent areal capacity (0.87 mAh cm-2) is achieved even after a 10-fold increase of loading mass (â¼11.5 mg cm-2), which is of great significance for practical applications. This work highlights the design of multifunctional superlattice electrodes for high-performance aqueous batteries.
RESUMO
Rechargeable aqueous zinc ion batteries (AZIBs) are attracting extensive attention owing to environmental friendliness and high safety. However, its practical applications are limited to the poor Coulombic efficiency and stability of a Zn anode. Herein, we demonstrate a periodically stacked CuS-CTAB superlattice, as a competitive conversion-type anode for AZIBs with greatly improved specific capacity, rate performance, and stability. The CuS layers react with Zn2+ to endow high capacity, while CTAB layers serve to stabilize the structure and facilitate Zn2+ diffusion kinetics. Accordingly, CuS-CTAB shows superior rate performance (225.3 mA h g-1 at 0.1 A g-1 with 144.4 mA h g-1 at 10 A g-1) and a respectable cyclability of 87.6% capacity retention over 3400 cycles at 10 A g-1. In view of the outstanding electrochemical properties, full batteries constructed with a CuS-CTAB anode and cathode (ZnxFeCo(CN)6 and ZnxMnO2) are evaluated in coin cells, which demonstrate impressive full-battery performance.
RESUMO
Aqueous zinc batteries (AZBs) are considered promising candidates for large-scale energy storage systems because of their low cost and high safety. However, currently developed AZB cathodes always suffer from the intense charge repulsion of multivalent-ion and complex multiphase electrochemistry, resulting in an insufficient cycling life and impracticable high-sloping discharge profile. Herein, we found that the synthesized ultrathin Bi2O2Se nanosheets can effectively activate stable protons storage in AZBs rather than large zinc ions. This proton-dominated cathode provides an ultraflat discharge plateau (72% capacity proportion) and exhibits long-term cyclability as 90.64% capacity retention after 2300 cycles at 1 A g-1. Further in situ synchrotron X-ray diffraction, ex situ X-ray photoelectronic spectroscopy, and density functional theory confirm the energy storage mechanism regarding the highly reversible proton insertion/extraction process. Benefiting from the proton-dominated fast dynamics, reliable energy supply (>81.5% discharge plateau capacity proportion) is demonstrated at a high rate of up to 10 A g-1 and in the frozen electrolyte below -15 °C. This work provides a potential design of high-performance electrode materials for AZBs.
RESUMO
Pancreatic ductal adenocarcinoma (PDA) is among the most lethal human cancers and it is insensitive to many chemotherapeutic drugs. The molecular basis of pancreatic cancer remains to be elucidated. Investigations into the molecular mechanism involved in the development and progression as well as drug resistance of the disease may be useful to understand the pathogenesis and progression of the disease and offer new targets for effective therapies. In the present study, we showed that salt-inducible kinase 1 (SIK1) was downregulated and loss of SIK1 was associated with gemcitabine resistance in pancreatic cancer. In pancreatic cancer cells, SIK1 inhibited proliferation, migration and invasion. An analysis of potential microRNA target sites was performed using the prediction algorithms, miRanda, TargetScan and PicTar. The three algorithms predicted that miR-203 is capable of targeting 3'UTR of SIK1. Subsequent experiments confirmed the prediction. In addition, the results showed that miR-203 promotes proliferation, migration and invasion in pancreatic cancer cells, whereas the restoration of SIK1 abrogated the regulation of pre-miR203-mediated proliferation, migration and invasion.
Assuntos
Adenocarcinoma/tratamento farmacológico , MicroRNAs/genética , Neoplasias Pancreáticas/tratamento farmacológico , Proteínas Serina-Treonina Quinases/biossíntese , Adenocarcinoma/genética , Adenocarcinoma/patologia , Linhagem Celular Tumoral , Movimento Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Desoxicitidina/administração & dosagem , Desoxicitidina/análogos & derivados , Resistencia a Medicamentos Antineoplásicos , Regulação Neoplásica da Expressão Gênica/efeitos dos fármacos , Humanos , MicroRNAs/metabolismo , Invasividade Neoplásica/genética , Invasividade Neoplásica/patologia , Neoplasias Pancreáticas/genética , Neoplasias Pancreáticas/patologia , Proteínas Serina-Treonina Quinases/genética , Transdução de Sinais , GencitabinaRESUMO
We present an effective method for the accurate three-dimensional (3D) measurement of small industrial parts under a complicated noisy background, based on stereo vision. To effectively extract the nonlinear features of desired curves of the measured parts in the images, a strategy from coarse to fine extraction is employed, based on a virtual motion control system. By using the multiscale decomposition of gray images and virtual beam chains, the nonlinear features can be accurately extracted. By analyzing the generation of geometric errors, the refined feature points of the desired curves are extracted. Then the 3D structure of the measured parts can be accurately reconstructed and measured with least squares errors. Experimental results show that the presented method can accurately measure industrial parts that are represented by various line segments and curves.
RESUMO
We present an effective method for reconstructing and measuring the three-dimensional (3D) structures of diamond crowns based on stereo vision. To reach high measurement accuracy, the influences of 3D measurement errors are analyzed in detail. Then, a method to accurately extract the linear features of diamond edges based on virtual motion control is described. Depending on the obtained linear features, the 3D structure of a diamond crown can be reconstructed with least squares error. The validity of the proposed method is verified by experiments. The results show that the proposed method can be used to measure the 3D structures of diamond crowns with satisfactory accuracy and efficiency, and it also can be used to extract linear features and measure other similar artificial objects that can be represented by line segments.