RESUMO
OBJECTIVE: Cervical lymph node metastasis (CLNM) is one of the most relevant influencing factors for the oncological outcome of patients with oral squamous cell carcinoma (OSCC). Several studies showed that the tumors depth of invasion (DOI) influences the risk for CLNM, however varying across the oral subsites. The aim of this study is to investigate the role of DOI and other risk factors in OSCC of the tongue in relation to the occurrence of occult CLNM. MATERIALS AND METHODS: In this retrospective study, n = 139 patients with primary OSCC of the tongue, treated by complete surgical resection (R0) with curative intention between 2013 and 2021, were included. For data analysis, epidemiologic data as well as preoperative tumor staging, surgical therapy including neck management, histopathological tumor data and follow-up were considered. Uni- and multivariate logistic regression were used to determine association between histopathological risk factors and the occurrence of occult CLNM. RESULTS: The rate of occult cervical metastasis was 19.4%. T-staging, cervical nodal disease (pN+) and lymphatic invasion were significantly associated with reduced OS and RFS. While DOI had no relevant influence on the OS and RFS (p = 0.88 and p = 0.91 respectively), there was significant correlation between DOI and the occurrence of occult CLNM (OR: 1.17, 95%CI: 1.05-1.30; p < 0.01). The optimal cutoff in predicting occult CLNM was 6 mm (Sensitivity: 84.2%, Specificity: 73.5%, AUC: 0.75). CONCLUSIONS: The DOI is a helpful risk parameter to predict the occurrence of occult nodal disease in OSCC of the tongue. Given the critical decision cutoff between 2 and 4 mm DOI for performing elective neck dissection in the current guidelines, our data suggests that in these cases, surgical de-escalation could be feasible with close follow-up. CLINICAL RELEVANCE: This study highlights the relevance of DOI as a risk parameter in the prediction of CLNM with the aim to specify the individual patient risk and to deescalate surgical therapy in order to decrease comorbidities while improving the oncological prognosis.
Assuntos
Carcinoma de Células Escamosas , Metástase Linfática , Invasividade Neoplásica , Estadiamento de Neoplasias , Neoplasias da Língua , Humanos , Masculino , Feminino , Estudos Retrospectivos , Pessoa de Meia-Idade , Neoplasias da Língua/patologia , Neoplasias da Língua/cirurgia , Carcinoma de Células Escamosas/patologia , Carcinoma de Células Escamosas/cirurgia , Medição de Risco , Idoso , Fatores de Risco , Adulto , Idoso de 80 Anos ou maisRESUMO
Selective neck dissection (SND) is the treatment of choice in patients with oral squamous cell carcinomas (OSCCs) and clinically node-negative necks (cN0). The treatment of patients with positive-staged necks (cN+) includes SND as well as comprehensive neck dissection (CND). The clear benefit of one or the other remains under debate. We aim to address this lack of clarity by analysing patients with OSCC staged with clinically node-positive necks, treated with either CND or SND using a level-by-level approach. This retrospective study included patients diagnosed with OSCC with clinically (cN+) and pathologically (pN+) positive cervical lymph nodes (LNs) with clear neck level categorization during the years 2010-2019. In total, 74 patients were analysed. Cox regression analysis found no significance for the type of ND being an independent risk factor, neither for overall survival (OS) nor for disease-free survival (DFS). Regional recurrence of CND cases (5.77%) was comparable to SND cases (9.09%). For OS, extracapsular spread (ECS) and male sex were identified as independent risk factors with poorer outcome. pT-stage and ECS were found to be independent risk factors for DFS. The results of this study suggest that both CND and SND may be viable treatment options for certain patients with OSCC pN+.
Assuntos
Carcinoma de Células Escamosas , Linfonodos , Metástase Linfática , Neoplasias Bucais , Esvaziamento Cervical , Humanos , Masculino , Feminino , Neoplasias Bucais/cirurgia , Neoplasias Bucais/patologia , Neoplasias Bucais/mortalidade , Pessoa de Meia-Idade , Esvaziamento Cervical/métodos , Idoso , Estudos Retrospectivos , Adulto , Intervalo Livre de Doença , Linfonodos/patologia , Linfonodos/cirurgia , Carcinoma de Células Escamosas/cirurgia , Carcinoma de Células Escamosas/patologia , Resultado do Tratamento , Recidiva Local de Neoplasia/patologia , Idoso de 80 Anos ou mais , Fatores de RiscoRESUMO
Magnesium as a biodegradable material offers promising results in recent studies of different maxillo-facial fracture models. To overcome adverse effects caused by the fast corrosion of pure magnesium in fluid surroundings, various alloys, and surface modifications are tested in animal models. In specified cases, magnesium screws already appeared for clinical use in maxillofacial surgery. The present study aims to compare the bone healing outcome in a non-load-bearing fracture scenario of the forehead in sheep when fixed with standard-sized WE43 magnesium fixation plates and screws with plasma electrolytic oxidation (PEO) surface modification in contrast to titanium osteosynthesis. Surgery was performed on 24 merino mix sheep. The plates and screws were explanted en-bloc with the surrounding tissue after four and twelve weeks. The outcome of bone healing was investigated with micro-computed tomography, histological, immunohistological, and fluorescence analysis. There was no significant difference between groups concerning the bone volume, bone volume/ total volume, and newly formed bone in volumetric and histological analysis at both times of investigation. The fluorescence analysis revealed a significantly lower signal in the magnesium group after one week, although there was no difference in the number of osteoclasts per mm2. The magnesium group had significantly fewer vessels per mm2 in the healing tissue. In conclusion, the non-inferiority of WE43-based magnesium implants with PEO surface modification was verified concerning fracture healing under non-load-bearing conditions in a defect model. STATEMENT OF SIGNIFICANCE: Titanium implants, the current gold standard of fracture fixation, can lead to adverse effects linked to the implant material and often require surgical removal. Therefore, degradable metals like the magnesium alloy WE43 with plasma electrolytic oxidation (PEO) surface modification gained interest. Yet, miniplates of this alloy with PEO surface modification have not been examined in a fracture defect model of the facial skeleton in a large animal model. This study shows, for the first time, the non-inferiority of magnesium miniplates compared to titanium miniplates. In radiological and histological analysis, bone healing was undisturbed. Magnesium miniplates can reduce the number of interventions for implant removal, thus reducing the risk for the patient and minimizing the costs.
RESUMO
Titanium plates are the current gold standard for fracture fixation of the mandible. Magnesium alloys such as WE43 are suitable biodegradable alternatives due to their high biocompatibility and elasticity modulus close to those of cortical bone. By surface modification, the reagibility of magnesium and thus hydrogen gas accumulation per time are further reduced, bringing plate fixation with magnesium closer to clinical application. This study aimed to compare bone healing in a monocortical mandibular fracture model in sheep with a human-standard size, magnesium-based, plasma electrolytic-oxidation (PEO) surface modified miniplate fixation system following 4 and 12 weeks. Bone healing was analyzed using micro-computed tomography and histological analysis with Movat's pentachrome and Giemsa staining. For evaluation of the tissue's osteogenic activity, polychrome fluorescent labeling was performed, and vascularization was analyzed using immunohistochemical staining for alpha-smooth muscle actin. Bone density and bone mineralization did not differ significantly between titanium and magnesium (BV/TV: T1: 8.74 ± 2.30%, M1: 6.83 ± 2.89%, p = 0.589 and T2: 71.99 ± 3.13%, M2: 68.58 ± 3.74%, p = 0.394; MinB: T1: 26.16 ± 9.21%, M1: 22.15 ± 7.99%, p = 0.818 and T2: 77.56 ± 3.61%, M2: 79.06 ± 4.46%, p = 0.699). After 12 weeks, minor differences were observed regarding bone microstructure, osteogenic activity, and vascularization. There was significance with regard to bone microstructure (TrTh: T2: 0.08 ± 0.01 mm, M2: 0.06 ± 0.01 mm; p = 0.041). Nevertheless, these differences did not interfere with bone healing. In this study, adequate bone healing was observed in both groups. Only after 12 weeks were some differences detected with larger trabecular spacing and more vessel density in magnesium vs titanium plates. However, a longer observational time with full resorption of the implants should be targeted in future investigations.
Assuntos
Placas Ósseas , Magnésio , Mandíbula , Titânio , Animais , Magnésio/farmacologia , Titânio/química , Titânio/farmacologia , Ovinos , Mandíbula/cirurgia , Mandíbula/diagnóstico por imagem , Consolidação da Fratura/efeitos dos fármacos , Propriedades de Superfície , Osteogênese/efeitos dos fármacos , Fraturas Mandibulares/cirurgia , Fraturas Mandibulares/diagnóstico por imagem , Microtomografia por Raio-X , Ligas/químicaRESUMO
Lately, the potential risk of disease transmission due to the use of bovine-derived bone substitutes has become obvious, demonstrating the urgent need for a synthetic grafting material with comparable bioactive behaviour and properties. Therefore, the effect of a synthetic hydroxyapatite (HA) (Osbone®) bone grafting material on bone regeneration was evaluated 2 weeks, 1 month, and 3, 6, 12 and 18 months after implantation in critical-size bone defects in the ovine scapula and compared to that of a bovine-derived HA (Bio-Oss®) and ß-tricalcium phosphate (TCP) (Cerasorb® M). New bone formation and the biodegradability of the bone substitutes were assessed histomorphometrically. Hard tissue histology and immunohistochemical analysis were employed to characterize collagen type I, alkaline phosphatase, osteocalcin, as well as bone sialoprotein expression in the various cell and matrix components of the bone tissue to evaluate the bioactive properties of the bone grafting materials. No inflammatory tissue response was detected with any of the bone substitute materials studied. After 3 and 6 months, ß-TCP (Cerasorb® M) showed superior bone formation when compared to both HA-based materials (3 months: ß-TCP 55.65 ± 2.03% vs. SHA 49.05 ± 3.84% and BHA 47.59 ± 1.97%; p ≤ 0.03; 6 months: ß-TCP 62.03 ± 1.58%; SHA: 55.83 ± 2.59%; BHA: 53.44 ± 0.78%; p ≤ 0.04). Further, after 12 and 18 months, a similar degree of bone formation and bone-particle contact was noted for all three bone substitute materials without any significant differences. The synthetic HA supported new bone formation, osteogenic marker expression, matrix mineralization and good bone-bonding behaviour to an equal and even slightly superior degree compared to the bovine-derived HA. As a result, synthetic HA can be regarded as a valuable alternative to the bovine-derived HA without the potential risk of disease transmission.
RESUMO
Rosacea is often considered a cosmetic problem but is known to be associated with a variety of comorbidities. To identify such risks, we generated two age- and sex-matched real-world cohorts of 122,444 patients each with and without rosacea. In contrast to earlier studies, we found significant associations with malignant melanoma (OR 6.02, 95% CI 5.76-6.32). This association does not exist for an Asian sub-cohort, which could explain previous inconclusive or conflicting reports. Several strongly associated comorbidities like visual disturbances (ICD-10: H53-H54; OR 4.80, 4.68-4.92), metabolic disorders (E73-E79; OR 3.17, 3.11-3.22), joint problems (M25; OR 4.16, 4.08-4.25) and type 2 diabetes (E11; OR 1.62, 1.58-1.65) should be watched as a risk for rosacea patients. Rosacea is associated with some comorbidities and ethnicity may be a risk factor in melanoma development. The retrospective nature of this study and the sole use of ICD-10 code based filtering calls for future validation of our findings. Additionally, confounding factors such as skin type and previous UV exposure should be included in future studies.
Assuntos
Melanoma , Rosácea , População Branca , Humanos , Rosácea/epidemiologia , Melanoma/epidemiologia , Melanoma/etiologia , Feminino , Masculino , Pessoa de Meia-Idade , Fatores de Risco , Adulto , Neoplasias Cutâneas/epidemiologia , Neoplasias Cutâneas/etiologia , Idoso , Comorbidade , Estudos RetrospectivosRESUMO
Objective: In advanced oral squamous cell carcinoma (OSCC), adjuvant therapy (AT) is an important part of the treatment to ensure extended locoregional control after primary surgical resection. The impact of the time interval between surgery and AT on the oncological prognosis remains unclear, particularly in high-risk constellations. The aim of this study is to categorize treatment delays and to determine their impact on the oncological prognosis within the context of the histopathological risk parameters of patients with advanced OSCC. Methods: In this single-institutional retrospective cohort study, all patients treated for OSCC between 2016 and 2021 and who received postoperative chemoradiation (POCRT) were included. Patients were divided into two groups: Group I: ≤ 6 weeks between surgery and POCRT; and Group II: > 6 weeks between surgery and POCRT. Results: Overall, 202 patients were included (Group I: 156 (77.2%) vs. Group II: 46 (22.8%)). There were no statistically significant differences in epidemiological aspects and histopathological risk factors between the two groups. The maximum time to initiation of POCRT was 11 weeks. Delayed POCRT initiation had no statistically significant influence on the 5-year OS (61.6% vs. 57.3%, p = 0.89), locoregional control rate (38.6% vs. 43.3%, p = 0.57), and RFS (32.3% vs. 30.4%, p = 0.21). On multivariate analysis, extracapsular spread (HR: 2.21, 95% CI: 1.21 - 4.04, p = 0.01) and incomplete surgical resection (HR: 2.01, 95% CI: 1.10 - 3.69, p = 0.02) were significantly correlated with OS. For RFS, ECS (HR: 1.82, 95% CI: 1.15 - 2.86, p = 0.01), incomplete resection (HR: 1.67, 95% CI: 1.04 - 2.71, p = 0.04), and vascular infiltration of the tumor (V-stage; HR: 2.15, 95% CI: 1.08 - 4.27, p = 0.03) were significant risk predictors. Conclusion: Delays in POCRT initiation up to 11 weeks after surgical resection for advanced OSCC were not statistically significantly associated with impaired survival. In cases of prolonged surgical treatment due to management of complications, a small delay in AT beyond the recommended time limit may be justified and AT should still be pursued.
RESUMO
BACKGROUND: The role of viral agents in the development of head and neck cancers has remained controversial. While markers of viral origin have been isolated from oral cancer tissues, a causative relationship has yet to be shown. The aim of this study was to evaluate the relationship between head and neck cancers and Herpes simplex virus, one of the most common viral infections of the oral orifice. METHODS: Here, we conducted a retrospective analysis of two age- and gender-matched cohorts extracted from the real-world database TriNetX on March 10th, 2023, each consisting of 249,272 patients with and without Herpes simplex infections (ICD-10: B00). The diagnoses C00-C14 were analyzed, and risk analysis and Kaplan-Meier survival statics were computed. RESULTS: The strongest association was found for lip cancer (ICD-10: C00) with a hazard ratio [HR (CI 95% low-high)] of 3.08 (1.77-5.35). A significant association with HR of 1.17 (1.02-1.34) was found for the entire group of head and neck cancers. Confounders like smoking and alcohol dependence were considered using propensity score matching. CONCLUSION: The surprisingly strong correlation with lip, oral cavity, and pharynx neoplasms sheds new light on supposedly harmless herpes simplex infections, suggesting them as a possible new factor for risk stratification.
RESUMO
Titanium patient-specific (CAD/CAM) plates are frequently used in mandibular reconstruction. However, titanium is a very stiff, non-degradable material which also induces artifacts in the imaging. Although magnesium has been proposed as a potential material alternative, the biomechanical conditions in the reconstructed mandible under magnesium CAD/CAM plate fixation are unknown. This study aimed to evaluate the primary fixation stability and potential of magnesium CAD/CAM miniplates. The biomechanical environment in a one segmental mandibular reconstruction with fibula free flap induced by a combination of a short posterior titanium CAD/CAM reconstruction plate and two anterior CAD/CAM miniplates of titanium and/or magnesium was evaluated, using computer modeling approaches. Output parameters were the strains in the healing regions and the stresses in the plates. Mechanical strains increased locally under magnesium fixation. Two plate-protective constellations for magnesium plates were identified: (1) pairing one magnesium miniplate with a parallel titanium miniplate and (2) pairing anterior magnesium miniplates with a posterior titanium reconstruction plate. Due to their degradability and reduced stiffness in comparison to titanium, magnesium plates could be beneficial for bone healing. Magnesium miniplates can be paired with titanium plates to ensure a non-occurrence of plate failure.
Assuntos
Retalhos de Tecido Biológico , Reconstrução Mandibular , Humanos , Retalhos de Tecido Biológico/cirurgia , Reconstrução Mandibular/métodos , Magnésio , Titânio , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Placas ÓsseasRESUMO
Impaired bony healing following bilateral sagittal split osteotomy (BSSO) is a major unmet medical need for affected patients, and rare occurrences can hinder the identification of underlying risk factors. We hypothesised that osseous union following BSSO can be quantified using volumetric analysis, and we aimed to identify the risk factors for impaired bone healing. The percentage change in bony volume was measured in orthognathic patients following BSSO using two consecutive postoperative cone-beam computed tomography scans. Patients' characteristics and treatment parameters were documented, and correlation and regression analyses of these variables performed. Thirty-six patients (23 men and 13 women) with a mean (SD) age of 33.28 (11.86) years were included. The gap site (lingual versus buccal) (p < 0.01) had a significant impact on the change in volume. Age (p = 0.06) showed a trend towards significance. Initial width of the osteotomy gap, sex, and indication for surgery did not influence osseous healing. Increased age at surgery and the side of the buccal osteotomy are independent risk factors for impaired osseous healing following BSSO.
Assuntos
Mandíbula , Cirurgia Ortognática , Masculino , Humanos , Feminino , Adulto , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Osteotomia Sagital do Ramo Mandibular/efeitos adversos , Osteotomia Sagital do Ramo Mandibular/métodos , Estudos Retrospectivos , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
BACKGROUND: Mechanical and morphological factors have both been described to influence the rate of pseudarthrosis in mandibular reconstruction. By minimizing mechanical confounders, the present study aims to evaluate the impact of bone origin at the intersegmental gap on osseous union. METHODS: Patients were screened retrospectively for undergoing multi-segment fibula free flap reconstruction of the mandible including the anterior part of the mandible and osteosynthesis using patient-specific 3D-printed titanium reconstruction plates. Percentage changes in bone volume and width at the bone interface between the fibula/fibula and fibula/mandible at the anterior intersegmental gaps within the same patient were determined using cone-beam computed tomography (CBCT). Additionally, representative samples of the intersegmental zones were assessed histologically and using micro-computed tomography (µCT). RESULTS: The bone interface (p = 0.223) did not significantly impact the change in bone volume at the intersegmental gap. Radiotherapy (p < 0.001), time between CBCT scans (p = 0.006) and wound healing disorders (p = 0.005) were independent risk factors for osseous non-union. Preliminary analysis of the microstructure of the intersegmental bone did not indicate morphological differences between fibula-fibula and fibula-mandible intersegmental bones. CONCLUSIONS: The bone interface at the intersegmental gap in mandibular reconstruction did not influence long-term bone healing significantly. Mechanical and clinical properties seem to be more relevant for surgical success.
Assuntos
Retalhos de Tecido Biológico , Neoplasias Mandibulares , Reconstrução Mandibular , Pseudoartrose , Humanos , Reconstrução Mandibular/métodos , Neoplasias Mandibulares/diagnóstico por imagem , Neoplasias Mandibulares/cirurgia , Estudos Retrospectivos , Fíbula/diagnóstico por imagem , Fíbula/cirurgia , Pseudoartrose/diagnóstico por imagem , Pseudoartrose/etiologia , Pseudoartrose/cirurgia , Microtomografia por Raio-X , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Transplante Ósseo/métodosRESUMO
This study aimed to compare the clinical outcomes and complication rates of patient-specific 3D-printed mini- and reconstruction plates for free flap fixation in mandibular reconstruction. A retrospective monocentric study was carried out between April 2017 and December 2021 to analyze patients undergoing immediate mandibular reconstruction using fibula free flaps and osteosynthesis using patient-specific 3D-printed implants. Eighty-three patients with a mean age of 63.6 years were included. The mean follow-up period was 18.5 months. Patient-specific 3D-printed plates were designed as reconstruction plates (38 patients), miniplates (21 patients) or a combination of reconstruction- and miniplates (24 patients). With miniplates, plate removal was performed significantly more often via an intraoral approach (p < 0.001) and in an outpatient setting (p = 0.002). Univariate analysis showed a higher fistula rate with reconstruction plates (p = 0.037). Multivariate analysis showed no significant differences in complications. Case-control matching demonstrated significantly lower rates of fistula (p = 0.017) and non-union (p = 0.029) in the combined group. This retrospective study shows a tendency towards reduced complication rates with patient-specific 3D-printed miniplates in comparison to patient-specific 3D-printed reconstruction plates for immediate mandibular reconstruction with fibula free flaps.
Assuntos
Fístula , Retalhos de Tecido Biológico , Reconstrução Mandibular , Humanos , Pessoa de Meia-Idade , Estudos Retrospectivos , Mandíbula/cirurgia , Placas Ósseas , Impressão TridimensionalRESUMO
Introduction: Autologous bone transplantation is successfully used in reconstructive surgery of large/critical-sized bone defects, whereby the microvascular free fibula flap is still regarded as the gold standard for the reconstruction of such defects in the head and neck region. Here, we report the morphological and lacunar properties of patient-paired bone samples from eight patients from the jaw (AB; recipient site) and the fibula (FB; donor site) on the micron length-scale using Synchrotron µ-CT. Insights into differences and similarities between these bone structures could offer a better understanding of the underlying mechanism for successful surgical outcomes and might clear the path for optimized, nature-inspired bone scaffold designs. Methods: Spatial vessel-pore arrangements, bone morphology, fluid-simulation derived permeability tensor, osteocyte lacunar density, and lacunar morphology are compared. Results: The orientation of the vessel system indicates a homogenous vessel orientation for AB and FB. The average mineral distance (50%) to the closest vessel boundary is higher in AB than in FB (the mean is 96 µm for AB vs. 76 µm for FB; p = 0.021). Average osteocyte lacunar density is found to be higher in AB than in FB (mean 22,874 mm3 vs. 19,376 mm3 for FB; p = 0.038), which might compensate for the high distance from the mineral to the nearest vessel. No significant differences in lacunar volume are found between paired AB and FB. Discussion: A comparable vessel network and similar distribution of vessel porosity between AB and FB may allow the FB graft to exhibit a high regeneration potential when connected to AB, and this might correlate with a high osteoinductive and osteoconductive potential of FB when connected to AB. Since widely used and potent synthetic bone grafts exist, new insight into the bone structure of well-established autologous bone grafts, such as the free fibula flap, could help to improve the performance of such materials and therefore the design of 3D scaffolds.
RESUMO
A comprehensive questionnaire with 43 questions was designed to evaluate quality of life, based on rehabilitation with a facial prosthesis. Each patient's psychological situation was assessed using the validated questionnaire and associated scales. Different patient groups were compared with each other in terms of questionnaire scores and general data. In total, 76 patients with a prosthesis of the orbit, nose, or ear, or a combination thereof, were included. There was a highly significant difference in overall satisfaction with defect reconstruction via a prosthesis of the ear compared with the orbit and nose (F(3) = 6.511, p = 0.001). Patients with congenital defects showed a significantly higher level of general satisfaction compared with patients with acquired defects (F(2) = 5.795, p = 0.001). Patients who returned to work were significantly more satisfied with their quality of life (T(57) = 2.626, p = 0.011). With regard to improvements to the state-of-the-art prostheses, the majority of patients suggested better retention, more durable colors, make-up possibilities, less noticeable margins, softer materials, and a movable orbital prosthesis. Within the limitations of the study it seems that facial epitheses improved mental wellbeing and increased quality of life among patients with facial defects. Multiple factors, such as type of facial defect, location of residence, and education can have a potential influence on the quality of life of affected patients. However, further studies are needed, since the psychological and social challenges remain.
Assuntos
Implantes Dentários , Implantes Orbitários , Humanos , Qualidade de Vida/psicologia , Face , Nariz/cirurgiaRESUMO
BACKGROUND: The challenges in developing new bone replacement materials and procedures reside not solely in technological innovation and advancement, but also in a broader patient therapy acceptance. Therefore, there is a need to assess patients' perspectives on the materials and approaches in use as well as the ones being developed to better steer future progress in the field. METHODS: A self-initiating cross-sectional questionnaire aimed at people seeking treatment at the university hospital environment of Charité Berlin was formulated. The survey contained 15 close-ended questions directed toward the participant's epidemiological profile, willingness, acceptance, and agreement to receive different bone replacement materials, as well as, worries about the post-surgical consequences that can arise post bone replacement surgery. Descriptive and categorical analysis was performed to compare the observed number of subjects, their profile and each related response (Pearson's chi-square test or Fischer's test, p < 0.05). RESULTS: A total of 198 people engaged with the questionnaire, most of them Millennials. Overall patients trusted scientifically developed biomaterials designed for bone replacement, as demonstrated by their willingness to participate in a clinical trial, their acceptance of alloplastic materials, and the none/few worries about the presence of permanent implants. The data revealed the preferences of patients towards autologous sources of cells and blood to be used with a biomaterial. The data have also shown that both generation and education influenced willingness to participate in a clinical trial and acceptance of alloplastic materials, as well as, worries about the presence of permanent implants and agreement to receive a material with pooled blood and cells. CONCLUSION: Patients were open to the implantation of biomaterials for bone replacement, with a preference toward autologous sources of blood and/or tissue. Moreover, patients are concerned about strategies based on permanent implants, which indicates a need for resorbable materials. The knowledge gained in this study supports the development of new bone biomaterials.
Assuntos
Substitutos Ósseos , Humanos , Estudos Transversais , Materiais Biocompatíveis , HospitaisRESUMO
Introduction: Recently, efforts towards the development of patient-specific 3D printed scaffolds for bone tissue engineering from bioactive ceramics have continuously intensified. For reconstruction of segmental defects after subtotal mandibulectomy a suitable tissue engineered bioceramic bone graft needs to be endowed with homogenously distributed osteoblasts in order to mimic the advantageous features of vascularized autologous fibula grafts, which represent the standard of care, contain osteogenic cells and are transplanted with the respective blood vessel. Consequently, inducing vascularization early on is pivotal for bone tissue engineering. The current study explored an advanced bone tissue engineering approach combining an advanced 3D printing technique for bioactive resorbable ceramic scaffolds with a perfusion cell culture technique for pre-colonization with mesenchymal stem cells, and with an intrinsic angiogenesis technique for regenerating critical size, segmental discontinuity defects in vivo applying a rat model. To this end, the effect of differing Si-CAOP (silica containing calcium alkali orthophosphate) scaffold microarchitecture arising from 3D powder bed printing (RP) or the Schwarzwalder Somers (SSM) replica fabrication technique on vascularization and bone regeneration was analyzed in vivo. In 80 rats 6-mm segmental discontinuity defects were created in the left femur. Methods: Embryonic mesenchymal stem cells were cultured on RP and SSM scaffolds for 7d under perfusion to create Si-CAOP grafts with terminally differentiated osteoblasts and mineralizing bone matrix. These scaffolds were implanted into the segmental defects in combination with an arteriovenous bundle (AVB). Native scaffolds without cells or AVB served as controls. After 3 and 6 months, femurs were processed for angio-µCT or hard tissue histology, histomorphometric and immunohistochemical analysis of angiogenic and osteogenic marker expression. Results: At 3 and 6 months, defects reconstructed with RP scaffolds, cells and AVB displayed a statistically significant higher bone area fraction, blood vessel volume%, blood vessel surface/volume, blood vessel thickness, density and linear density than defects treated with the other scaffold configurations. Discussion: Taken together, this study demonstrated that the AVB technique is well suited for inducing adequate vascularization of the tissue engineered scaffold graft in segmental defects after 3 and 6 months, and that our tissue engineering approach employing 3D powder bed printed scaffolds facilitated segmental defect repair.
RESUMO
OBJECTIVES: This study aimed to evaluate the influence of vestibuloplasty on the clinical success and survival of dental implants in head and neck tumor patients. MATERIALS AND METHODS: A retrospective single-center study was conducted. All patients received surgical therapy of a tumor in the head or neck and underwent surgical therapy and, if necessary, radiotherapy/radiochemotherapy. Patients with compromised soft tissue conditions received vestibuloplasty using a split thickness skin graft and an implant-retained splint. Implant survival and success and the influence of vestibuloplasty, gender, radiotherapy, and localizations were evaluated. RESULTS: A total of 247 dental implants in 49 patients (18 women and 31 men; mean age of 63.6 years) were evaluated. During the observation period, 6 implants were lost. The cumulative survival rate was 99.1% after 1 year and 3 years and 93.1% after 5 years for patients without vestibuloplasty, compared to a survival and success rate of 100% after 5 years in patients with vestibuloplasty. Additionally, patients with vestibuloplasty showed significantly lower peri-implant bone resorption rates after 5 years (mesial: p = 0.003; distal: p = 0.001). CONCLUSION: This study demonstrates a high cumulative survival and success rate of dental implants after 5 years in head and neck tumor patients, irrespective of irradiation. Patients with vestibuloplasty showed a significantly higher rate of implant survival and significantly lower peri-implant bone resorption after 5 years. CLINICAL RELEVANCE: Vestibuloplasty should always be considered and applied if required by the anatomical situations to achieve high implant survival/success rates in head and neck tumor patients.
Assuntos
Reabsorção Óssea , Implantes Dentários , Neoplasias de Cabeça e Pescoço , Masculino , Humanos , Feminino , Pessoa de Meia-Idade , Estudos Retrospectivos , Implantação Dentária Endóssea , Vestibuloplastia , Neoplasias de Cabeça e Pescoço/radioterapia , Neoplasias de Cabeça e Pescoço/cirurgia , Prótese Dentária Fixada por ImplanteRESUMO
The mandible (lower jaw) bone is aesthetically responsible for shaping the lower face, physiologically in charge of the masticatory movements, and phonetically accountable for the articulation of different phonemes. Thus, pathologies that result in great damage to the mandible severely impact the lives of patients. Mandibular reconstruction techniques are mainly based on the use of flaps, most notably free vascularized fibula flaps. However, the mandible is a craniofacial bone with unique characteristics. Its morphogenesis, morphology, physiology, biomechanics, genetic profile, and osteoimmune environment are different from any other non-craniofacial bone. This fact is especially important to consider during mandibular reconstruction, as all these differences result in unique clinical traits of the mandible that can impact the results of jaw reconstructions. Furthermore, overall changes in the mandible and the flap post-reconstruction may be dissimilar, and the replacement process of the bone graft tissue during healing can take years, which in some cases can result in postsurgical complications. Therefore, the present review highlights the uniqueness of the jaw and how this factor can influence the outcome of its reconstruction while using an exemplary clinical case of pseudoarthrosis in a free vascularized fibula flap.
RESUMO
BACKGROUND: Patient-specific 3D-printed miniplates for free flap fixation in mandibular reconstruction were recently associated with enhanced osseous union. Higher mechanical strains resulting from these plates are discussed as reasons, but biomechanical studies are missing. This study aims to examine, whether patient-specific 3D-printed miniplates provide an increased interosteotomy movement (IOM) and lower stiffness compared with reconstruction plates. METHODS: Polyurethane (PU) mandible and fibula models (Synbone AG, Malans, Schweiz) were used to simulate mandibular reconstruction with a one segment fibula flap equivalent. Osteosynthesis was performed using either four patient-specific 3D-printed miniplates (3D-Mini) or one patient-specific 3D-printed reconstruction plate (3D-Recon). Mastication was simulated using cyclic dynamic loading with increasing loads until material failure or a maximum load of 1000 N. Continuous IOM recording was carried out using a 3D optical tracking system (ARAMIS, Carl Zeiss GOM Metrology, Braunschweig, Germany). FINDINGS: The averaged stiffness at a load of 100-300 N load did not differ between the groups (p = 0.296). There was a faster 1.0 mm vertical displacement in the 3D-Mini group (26 376 ± 14 190 cycles versus 44 817 ± 30 430 cycles, p = 0.018). The IOM were higher with miniplate fixation in the distal gap (p = 0.040). In the mesial gap, there was no significant difference between the groups (p = 0.160). INTERPRETATION: Fixation with patient-specific 3D-printed miniplates results in higher mechanical strains. Lower rates of pseudarthrosis, as seen in clinical studies, might be caused by this phenomenon. Surgeons should evaluate the primary use of 3D-printed miniplates in mandibular reconstruction due to advantages of intraoral plate removal alongside safe osteosynthesis.
Assuntos
Reconstrução Mandibular , Humanos , Reconstrução Mandibular/métodos , Mandíbula/cirurgia , Placas Ósseas , Fixação Interna de Fraturas , Impressão TridimensionalRESUMO
BACKGROUND: Orthognathic surgery (OS) is a frequently performed procedure for the correction of dentofacial deformities and malocclusion. Research on OS is mostly limited to single-surgeon experience or single-institutional reports. We, therefore, retrospectively analyzed a multi-institutional database to investigate outcomes of OS and identify risk factors for peri- and postoperative complications. METHODS: We reviewed the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database (2008-2020) to identify patients who underwent OS for mandibular and maxillary hypo- and hyperplasia. The postoperative outcomes of interest included 30-day surgical and medical complications, reoperation, readmission, and mortality. We also evaluated risk factors for complications. RESULTS: The study population included 674 patients, 48% of whom underwent single jaw surgery, 40% double jaw surgery, and 5.5% triple jaw surgery. The average age was 29 ± 11 years, with an equal gender distribution (females: n = 336; 50%, males: n = 338; 50%). Adverse events were relatively rare, with a total of 29 (4.3%) complications reported. The most common surgical complication was superficial incisional infection (n = 14; 2.1%). While the multivariable analysis revealed isolated single lower jaw surgery (p = 0.03) to be independently associated with surgical complication occurrence, it also identified an association between the outpatient setting and the frequency of surgical complications (p = 0.03) and readmissions (p = 0.02). In addition, Asian ethnicity was identified as a risk factor for bleeding (p = 0.003) and readmission (p = 0.0009). CONCLUSION: Based on the information recorded by the ACS-NSQIP database, our analysis underscored the positive (short-term) safety profile of OS. We found OS of the mandible to be associated with higher complication rates. The calculated risk role of OS in the outpatient setting warrants further investigation. A significant correlation between Asian OS patients and postoperative adverse events was found. Implementation of these novel risk factors into the surgical workflow may help facial surgeons refine their patient selection and improve patient outcomes. Future studies are needed to investigate the causal relationships of the observed statistical correlations.