Nanofluidic-Based Accumulation of Antigens for Miniaturized Immunoassay.

The continuous advances of Nanofluidics have been stimulating the development of novel nanostructures and strategies to accumulate very diluted analytes, for implementing a new class of high sensitivity miniaturized polymeric sensors. We take advantage of the electrokinetic properties of these structures, which allow accumulating analytes inside asymmetric microfluidic structures to implement miniaturized sensors able to detect diluted solutions down to nearly 1.2 pg/mL. In particular, exploiting polydimethylsiloxane devices, fabricated by using the junction gap breakdown technique, we concentrate antigens inside a thin microfunnel functionalized with specific antibodies to favor the interaction and, if it is the case, the recognition between antigens in solution and antibodies anchored to the surface. The transduction mechanism consists in detecting the fluorescence signal of labeled avidin when it binds to biotinylated antigens. Here, we demonstrate that exploiting these electrokinetic phenomena, typical of nanofluidic structures, we succeeded in concentrating biomolecules in correspondence of a 1 pL sensing region, a strategy that grants to the device performance comparable to standard immunoassays.

Integrating Microstructured Electrospun Scaffolds in an Open Microfluidic System for in Vitro Studies of Human Patient-Derived Primary Cells.

Recent studies have suggested that microenvironmental stimuli play a significant role in regulating cellular proliferation and migration, as well as in modulating self-renewal and differentiation processes of mammary cells with stem cell (SCs) properties. Recent advances in micro/nanotechnology and biomaterial synthesis/engineering currently enable the fabrication of innovative tissue culture platforms suitable for maintenance and differentiation of SCs in vitro. Here, we report the design and fabrication of an open microfluidic device (OMD) integrating removable poly(ε-caprolactone) (PCL) based electrospun scaffolds, and we demonstrate that the OMD allows investigation of the behavior of human cells during in vitro culture in real time. Electrospun scaffolds with modified surface topography and chemistry can influence attachment, proliferation, and differentiation of mammary SCs and epigenetic mechanisms that maintain luminal cell identity as a function of specific morphological or biochemical cues imparted by tailor-made fiber post-treatments. Meanwhile, the OMD architecture allows control of cell seeding and culture conditions to collect more accurate and informative in vitro assays. In perspective, integrated systems could be tailor-made to mimic specific physiological conditions of the local microenvironment and then analyze the response from screening specific drugs for more effective diagnostics, long-term prognostics, and disease intervention in personalized medicine.

Increased Flexibility in Lab-on-Chip Design with a Polymer Patchwork Approach.

Nanofluidic structures are often the key element of many lab-on-chips for biomedical and environmental applications. The demand for these devices to be able to perform increasingly complex tasks triggers a request for increasing the performance of the fabrication methods. Soft lithography and poly(dimethylsiloxane) (PDMS) have since long been the basic ingredients for producing low-cost, biocompatible and flexible devices, replicating nanostructured masters. However, when the desired functionalities require the fabrication of shallow channels, the "roof collapse" phenomenon, that can occur when sealing the replica, can impair the device functionalities. In this study, we demonstrate that a "focused drop-casting" of h-PDMS (hard PDMS) on nanostructured regions, provides the necessary stiffness to avoid roof collapse, without increasing the probability of deep cracks formation, a drawback that shows up in the peel-off step, when h-PDMS is used all over the device area. With this new approach, we efficiently fabricate working devices with reproducible sub-100 nm structures. We verify the absence of roof collapse and deep cracks by optical microscopy and, in order to assess the advantages that are introduced by the proposed technique, the acquired images are compared with those of cracked devices, whose top layer, of h-PDMS, and with those of collapsed devices, made of standard PDMS. The geometry of the critical regions is studied by atomic force microscopy of their resin casts. The electrical resistance of the nanochannels is measured and shown to be compatible with the estimates that can be obtained from the geometry. The simplicity of the method and its reliability make it suitable for increasing the fabrication yield and reducing the costs of nanofluidic polymeric lab-on-chips.

The Role of Surfaces in Gas Transport Through Polymer Membranes.

This paper describes a procedure to measure the permeability P, diffusivity D, and rate of adsorption k1, thus determining the solubility S and rate of desorption k2 of He, N2, O2, CH4, and CO2 on a polydimethylsiloxane (PDMS) membrane. The described procedure is able to determine experimentally all the physical quantities that characterize the gas transport process through a thin rubber polymer membrane. The experiments were carried out at room temperature and at a transmembrane pressure of 1 atm. The results are in good agreement with the available data in the literature and offer an evaluation of k1 and k2.

Template-assisted growth of transparent plasmonic nanowire electrodes.

Self-organized nanowire arrays are confined by glancing-angle Au deposition on nanopatterned glass templates prepared by ion beam sputtering. The semi-transparent 1D nanowire arrays are extended over large cm2 areas and are endowed with excellent electrical conductivity competitive with the best transparent conductive oxides (sheet resistance in the range of 5-20 Ohm sq-1). In addition, the nanowires support localized surface plasmon (LSP) resonances, which are easily tunable into the visible and near infrared spectrum and are selectively excited with incident light polarized perpendicularly to the wires. Such substrates, thus, behave as multifunctional nanoelectrodes, which combine good optoelectronic performance with dichroic plasmonic excitation. The electrical percolation process of the Au nanoelectrodes was monitored in situ during growth at glancing angle, both on flat and nanopatterned glass templates. In the first case, we observed a universal scaling of the differential percolation rate, independently of the glancing deposition angle, while deviations from the universal scaling were observed when Au was confined on nanopatterned templates. In the latter case, the pronounced shadowing effect promotes the growth of locally connected 1D Au nanosticks on the 'illuminated' ripple ridges, thus, introducing strong anisotropies with respect to the case of a 2D percolating network.

Channeling motion of gold nanospheres on a rippled glassed surface.

Gold nanospheres have been manipulated by atomic force microscopy on a rippled glass surface produced by ion beam sputtering and coated with an ultrathin (10 nm thick) graphitic layer. This substrate is characterized by irregular wavy grooves running parallel to a preferential direction. Measurements in ambient conditions show that the motion of the nanoparticles is confined to single grooves ('channels'), along which the particles move till they are trapped by local bottlenecks. At this point, the particles cross the ripple pattern in a series of consecutive jumps and continue their longitudinal motion along a different channel. Moreover, due to the asymmetric shape of the ripple profiles, the jumps occur in the direction of minimum slope, resembling a ratchet mechanism. Our results are discussed, extending a collisional model, which was recently developed for the manipulation of nanospheres on flat surfaces, to the specific geometry of this problem.

White light-emitting electrochemical cells based on the Langmuir-Blodgett technique.

Light-emitting electrochemical cells (LECs) showing a white emission have been prepared with Langmuir-Blodgett (LB) films of the metallosurfactant bis[2-(2,4-difluorophenyl)pyridine][2-(1-hexadecyl-1H-1,2,3-triazol-4-yl)pyridine]iridium(III) chloride (1), which work with an air-stable Al electrode. They were prepared by depositing a LB film of 1 on top of a layer of poly(N,N'-diphenyl-N,N'-bis(4-hexylphenyl)-[1,1'-biphenyl]-4,4'-diamine (pTPD) spin-coated on indium tin oxide (ITO). The white color of the electroluminescence of the device contrasts with the blue color of the photoluminescence of 1 in solution and within the LB films. Furthermore, the crystal structure of 1 is reported together with the preparation and characterization of the Langmuir monolayers (π-A compression isotherms and Brewster angle microscopy (BAM)) and LB films of 1 (IR, UV-vis and emission spectroscopy, X-ray photoelectron spectroscopy (XPS), specular X-ray reflectivity (SXR), and atomic force microscopy (AFM)).

Patterning of magnetic bimetallic coordination nanoparticles of Prussian blue derivatives by the Langmuir-Blodgett technique.

We report a novel method to prepare patterns of nanoparticles over large areas of the substrate. This method is based on the adsorption of the negatively charged nanoparticles dispersed in an aqueous subphase onto a monolayer of the phospholipid dipalmitoyl-l-α-phosphatidylcholine (DPPC) at the air-water interface. It has been used to prepare patterns of nanoparticles of Prussian blue analogues (PBA) of different size (K(0.25)Ni[Fe(CN)(6)](0.75) (NiFe), K(0.25)Ni[Cr(CN)(6)](0.75) (NiCr), K(0.25)Ni[Co(CN)(6)](0.75) (NiCo), Cs(0.4)Co[Cr(CN)(6)](0.8) (CsCoCr), and Cs(0.4)Co[Fe(CN)(6)](0.9) (CsCoFe)). The behavior of DPPC monolayer at the air-water interface in the presence of the subphase of PBA nanoparticles has been studied by the compression isotherms and Brewster angle microscopy (BAM) images. Atomic force microscopy (AFM) of the transferred films on mica substrates shows that patterns of the nanoparticles are observed for a 10(-4) M concentration of the subphase, based on the nanoparticle precursors, at surface pressures between 1 and 6 mN/m and transfer velocities from 10 to 80 mm/min. Vertical, horizontal, or tilted fringes of the nanoparticles with respect to the transfer direction can be obtained depending on the transfer velocity and surface pressure.

Photo-induced magnetic bistability in a controlled assembly of anisotropic coordination nanoparticles.

Anisotropic coordination nanoparticles of the photomagnetic network Cs(I)(2)Cu(II)(7)[Mo(IV)(CN)(8)](4) are obtained through a surfactant-free high-yield synthetic procedure in water. These particles are organised as Langmuir-Blodgett films with a preferential orientation of the nano-objects within the film that exhibit a magnetic bistability below 20 K with a very large coercivity due to an efficient photo-transformation.

Dual-emitting Langmuir-Blodgett film-based organic light-emitting diodes.

Langmuir-Blodgett (LB) films containing alternating layers of the metallosurfactants bis(4,4'-tridecyl-2,2'-bipyridine)-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium(II)-bis(chloride) (1) and bis[2-(2,4-difluorophenyl)pyridine](4,4'-dinonadecyl-2,2'-bipyridine)iridium(III) chloride (2) have been prepared. Langmuir monolayers at the air-water interface of 1 and 2 with different anions in the subphase have been characterized by pi-A compression isotherms and Brewster angle microscopy (BAM). The transferred LB films have been characterized by IR, UV-vis and emission spectroscopy, and atomic force microscopy (AFM). Electroluminescent devices formed by LB films containing alternating layers of these two molecules show dual emission by simple mixing of the two emitters in a single LB film, and by preparing two stacked configurations, in which a LB layer of the ruthenium complexes is deposited on top of a LB layer of the iridium complexes and the inverse situation. The color of the electroluminescence can be tuned by changing the thickness of each LB layer. Due to efficient hole blocking of a layer of the iridium complexes when deposited on top of the layer of ruthenium complexes, in that configuration the green emission of the iridium complexes is suppressed. In the opposite case, excitons are generated in both layers although most likely preferentially in the layer of the iridium complexes.

Dual-emissive photoluminescent Langmuir-Blodgett films of decatungstoeuropate and an amphiphilic iridium complex.

Langmuir monolayers and Langmuir-Blodgett (LB) films of the decatungstoeuropate [Eu(W(5)O(18))(2)](9-) (EuW(10)) and the amphiphilic Ir complex 1 have been successfully fabricated by using the adsorption properties of the EuW(10) polyanion dissolved in the aqueous subphase onto a positively charged 1 monolayer at the air-water interface. The compression isotherms and Brewster angle microscopy (BAM) of monolayers of 1 on pure water (1 monolayer) and on a subphase containing 10(-6) M EuW(10) and 10(-3) M NaCl (1/EuW(10) monolayer) have been studied. Infrared and UV-vis spectroscopy of the transferred LB films indicate that EuW(10) and 1 molecules are incorporated within these LB films. X-ray reflectivity (SXR) and atomic force microscopy (AFM) experiments indicate that LB films of 1 present a heterogeneous morphology while 1/EuW(10) films show a flatter and more homogeneous surface as well as a layered structure with a periodicity of 4.1 nm. Mixed monolayers of 1 and DODA (dimethyldioctadecylammonium bromide) have been prepared with EuW(10) polyanions in the subphase to control the concentration of 1 and EuW(10) polyanions within the LB films. AFM and SXR experiments with the transferred LB films show that the dilution of 1 with DODA improves the layered structure. The luminescence of 1 is partially quenched by EuW(10) in the 1/EuW(10) LB films, while emission from EuW(10) is not detected. On the other hand, emission from both entities is preserved in the LB films prepared from mixed DODA/1 monolayers, in which the red and yellow emissions arise independently from EuW(10) and 1, respectively. The different DODA:1 ratios lead to changes in the emission color. Therefore, they constitute a promising color-tunable luminescent material.

Molecular ionic junction for enhanced electronic charge transfer.

We present the first evidence of charge injection improvement in an organic electroluminescent device provided by a single ionic molecular layer. A hole-dominated, hybrid organic-inorganic light-emitting device is used as a probe to verify the effectiveness of the ionic compound monolayer on modifying the metal oxide cathode. The rearrangement of ions under an applied bias induces a strong field at the electrode-organic interface resulting in an enhancement of the electron injection into the organic semiconductor. A strong decrease in turn-on voltage for electroluminescence is observed for the device containing the ionic molecular monolayer.

A supramolecularly-caged ionic iridium(III) complex yielding bright and very stable solid-state light-emitting electrochemical cells.

A new iridium(III) complex showing intramolecular interligand pi-stacking has been synthesized and used to improve the stability of single-component, solid-state light-emitting electrochemical cell (LEC) devices. The pi-stacking results in the formation of a very stable supramolecularly caged complex. LECs using this complex show extraordinary stabilities (estimated lifetime of 600 h) and luminance values (average luminance of 230 cd m-2) indicating the path toward stable ionic complexes for use in LECs reaching stabilities required for practical applications.