RESUMO
Layered oxides constitute one of the most promising cathode materials classes for large-scale sodium-ion batteries because of their high specific capacity, scalable synthesis, and low cost. However, their practical use is limited by their low energy density, physicochemical instability, and poor cycling stability. Aiming to mitigate these shortcomings, in this work, we synthesized polycrystalline (PC) and single-crystal (SC) P2-type Na0.67-δMn0.67Ni0.33O2 (NMNO) cathode materials through a solid-state route and evaluated their physicochemical and electrochemical performance. The SC-NMNO cathode with a large mean primary particle size (D50) of 12.7 µm was found to exhibit high cycling stability leading to 47% higher capacity retention than PC-NMNO after 175 cycles at 1C rate in the potential window 4.2-1.5 V. This could be attributed to the effective mitigation of parasitic side reactions at the electrode-electrolyte interface and suppressed intergranular cracking induced by anisotropic volume changes. This is confirmed by the lower volume variation of SC-NMNO (ΔV â¼ 1.0%) compared to PC-NMNO (ΔV â¼ 1.4%) upon charging to 4.2 V. Additionally, the SC-NMNO cathode displayed slightly higher thermal stability compared to PC-NMNO. Both cathodes exhibited good chemical stability against air and water exposure, thus enabling material storage/handling in the ambient atmosphere as well as making them suitable for aqueous processing. In this regard, PC-NMNO was investigated with two low-cost aqueous binders, carboxymethyl cellulose, and sodium trimetaphosphate, which exhibited higher binding strength and displayed excellent electrochemical performance compared to PVDF, which could potentially lead to significant cost reduction in electrode manufacturing.
RESUMO
Calcium (Ca) batteries represent an attractive option for electrochemical energy storage due to physicochemical and economic reasons. The standard reduction potential of Ca (-2.87 V) is close to Li and promises a wide voltage window for Ca full batteries, while the high abundance of Ca in the earth's crust implicates low material costs. However, the development of Ca batteries is currently hindered by technical issues such as the lack of compatible electrolytes for reversible Ca2+ plating/stripping and high-capacity cathodes with fast kinetics. Herein, we employed FeS2 as a conversion cathode material and combined it with a Li+/Ca2+ hybrid electrolyte for Ca batteries. We demonstrate that Li+ ions ensured reversible Ca2+ plating/stripping on the Ca metal anode with a small overpotential. At the same time, they enable the conversion of FeS2, offering high discharge capacity. As a result, the Ca/FeS2 cell demonstrated an excellent long-term cycling performance with a high discharge capacity of 303 mAh g-1 over 200 cycles. Even though the practical application of such an approach is questionable due to the high quantity of electrolytes, we believe that our scientific findings still provide new directions for studying Ca batteries with long-term cycling.
RESUMO
Rechargeable calcium batteries possess attractive features for sustainable energy-storage solutions owing to their high theoretical energy densities, safety aspects and abundant natural resources. However, divalent Ca-ions and reactive Ca metal strongly interact with cathode materials and non-aqueous electrolyte solutions, leading to high charge-transfer barriers at the electrode-electrolyte interface and consequently low electrochemical performance. Here, we demonstrate the feasibility and elucidate the electrochemical properties of calcium-tin (Ca-Sn) alloy anodes for Ca-ion chemistries. Crystallographic and microstructural characterizations reveal that Sn formed from electrochemically dealloying the Ca-Sn alloy possesses unique properties, and that this in-situ formed Sn undergoes subsequent reversible calciation/decalciation as CaSn3. As demonstration of the suitability of Ca-Sn alloys as anodes for Ca-ion batteries, we assemble coin cells with an organic cathode (1,4-polyanthraquinone) in an electrolyte of 0.25 M calcium tetrakis(hexafluoroisopropyloxy)borate in dimethoxyethane. These electrochemical cells are charged/discharged for 5000 cycles at 260 mA g-1, retaining a capacity of 78 mAh g-1 with respect to the organic cathode. The discovery of new class of Ca-Sn alloy anodes opens a promising avenue towards viable high-performance Ca-ion batteries.
RESUMO
Simple magnesium salts with high electrochemical and chemical stability and adequate ionic conductivity represent a new-generation electrolyte for magnesium (Mg) batteries. Similar to other Mg electrolytes, the simple-salt electrolyte also suffers from high charge-transfer resistance on the Mg surface due to the adsorbed species in the solution. In the current study, we built a model Mg cell system with the Mg[B(hfip)4]2/DME electrolyte and Chevrel phase Mo6S8 cathode, to demonstrate the effect of such anode-electrolyte interfacial properties on the full-cell performance. It was found that the cell required additional activation cycles to achieve its maximal capacity. The activation process is mainly attributed to the conditioning of the anode-electrolyte interface, which could be boosted by introducing an additive amount of Mg(BH4)2 to the Mg[B(hfip)4]2/DME electrolyte. Electrochemical and spectroscopic analyses revealed that the Mg(BH4)2 additive helps to remove the native oxide layer and promotes the formation of a solid electrolyte interphase layer on Mg. As a result, the full cell with the additive-containing electrolyte delivered a stable capacity from the second cycle onward. Further battery tests showed a reversible cycling for 600 cycles and an excellent rate capability, indicating good compatibility of the Mg(BH4)2 additive. The current study not only provides fundamental insights into the interfacial phenomena in Mg batteries but also highlights the facile tunability of the simple-salt Mg electrolytes.