Microcapsules based on alginate and guar gum for co-delivery of hydrophobic antitumor bioactives.

The main goal was the development of a polysaccharide microcapsule for anticancer application based on guar gum and sodium alginate for the controlled release of hesperidin and betulinic acid by spray drying technique. The microcapsule showed an Encapsulation Efficiency of 98.15 ± 0.34 % for hesperidin and 99.76 ± 0.22 % for betulinic acid. In the release study, the Korsmeyer-Peppas mathematical model was identified as the most adequate to explain the observed release mechanism. In vivo tests were performed in zebrafish model, revealing that the microcapsules did not alter the locomotor activity and were not toxic within 96 h by oral administration, suggesting their biological safety. In vitro cytotoxic activity against HL-60 cells confirmed an IC50 value of 2.52 ± 0.23 µg mL-1 in 72 h. Additionally, a decrease in the cytotoxic activity of betulinic acid against L-929 (non-tumor) cells was evidenced. Therefore, the microcapsules synthesized in this work represent a promising formulation for anticancer applications.

Starch-based magnetic nanocomposite for targeted delivery of hydrophilic bioactives as anticancer strategy.

Magnetic nanocomposites were synthesized for the targeted delivery of hydrophilic bioactives through guidance generated by a magnetic field. Superparamagnetic iron oxide nanoparticles (SPIONs) were used to generate hydroxyethyl starch magnetic nanocapsules (HES MNCs). This synthesis allowed the co-encapsulation of oncocalyxone A (onco A) and surface-modified magnetite nanoparticles (Fe3O4@citrate) into the same nanostructure. The synthesized nanocapsules exhibited a core-shell morphology, with an average diameter of 143 nm. This nanocomposite showed potential anticancer activity (IC50) against four human tumor cell lines: glioblastoma SNB-19 (1.010 µgmL-1), colon carcinoma HCT-116 (2.675 µgmL-1), prostate PC3 (4.868 µgmL-1), and leukemia HL-60 (2.166 µgmL-1). Additionally, in vivo toxicity and locomotor activity were evaluated in a zebrafish (Danio rerio) model. The nanocomposite exhibited in vitro cytotoxicity, prolonged drug release profile and also responded to an applied magnetic field, representing a versatile compound with perspectives for highest concentration of different hydrophilic bioactives in a target tissue through magnetic vectorization.

Antibacterial activity of fluoxetine-loaded starch nanocapsules.

This work proposes the development of a starch-based drug carrier for fluoxetine (FLX) delivery and evaluate the improvement of the drug antibacterial activity. The starch nanocapsules were prepared via interfacial polyaddition reaction presenting a core-shell morphology, based on polyurethane linkage, with a particle size in the range 250-300 nm. Furthermore, FLX-loaded nanocapsules were evaluated regarding antibacterial potential against Staphylococcus aureus (ATCC® 6538P ™) and its clinical strains of methicillin-resistant. As expected, the FLX-loaded presented lower minimum inhibitory concentration (MIC) values, in the range of 190-95 µg mL-1, against all isolated microorganisms in comparison to FLX, 255 µg mL-1. According to results, the FLX-loaded starch nanocapsules have successfully improved drug antibacterial activity, generating promising perspectives on the field of the hydrophilic drug delivery systems.

Magnetic Porous Controlled Fe3O4-Chitosan Nanostructure: An Ecofriendly Adsorbent for Efficient Removal of Azo Dyes.

In this work, chitosan/magnetite nanoparticles (ChM) were quickly synthesized according to our previous report based on co-precipitation reaction under ultrasound (US) irradiation. Besides ChM was in-depth structurally characterized, showing a crystalline phase corresponding to magnetite and presenting a spheric morphology, a "nanorod"-type morphology was also obtained after increasing reaction time for eight minutes. Successfully, both morphologies presented a nanoscale range with an average particle size of approximately 5-30 nm, providing a superparamagnetic behavior with saturation magnetization ranging from 44 to 57 emu·g-1. As ChM nanocomposites have shown great versatility considering their properties, we proposed a comparative study using three different amine-based nanoparticles, non-surface-modified and surface-modified, for removal of azo dyes from aqueous solutions. From nitrogen adsorption-desorption isotherm results, the surface-modified ChMs increased the specific surface area and pore size. Additionally, the adsorption of anionic azo dyes (reactive black 5 (RB5) and methyl orange (MO)) on nanocomposites surface was pH-dependent, where surface-modified samples presented a better response under pH 4 and non-modified one under pH 8. Indeed, adsorption capacity results also showed different adsorption mechanisms, molecular size effect and electrostatic attraction, for unmodified and modified ChMs, respectively. Herein, considering all results and nanocomposite-type structure, ChM nanoparticles seem to be a suitable potential alternative for conventional anionic dyes adsorbents, as well as both primary materials source, chitosan and magnetite, are costless and easily supplied.

Magnetic Hybrid Wax Nanocomposites as Externally Controlled Theranostic Vehicles: High MRI Enhancement and Synergistic Magnetically Assisted Thermo/Chemo Therapy.

To fight against cancer, smarter drugs and drug delivery systems are required both to boost the efficiency of current treatments while reducing deleterious side effects, and combine diagnosis/monitoring with therapy (theranosis) in the search for the final goal of personalized medicine. This work presents the design, preparation, and proof-of-principle validation of a novel hybrid organic-inorganic nanocomposite joining together non-invasive imaging capabilities through magnetic resonance imaging and externally actuated therapeutic properties through a combination of chemo- and thermotherapy. The lipidic matrix of the nanocomposite was composed of carnauba wax, which was simultaneously dual loaded with magnetite nanoparticles and the anticancer drug Oncocalyxone A. Obtained formulations were fully characterized and showed outstanding performances as T2 -contrast agents in magnetic resonance imaging (r2 >800 mm-1 s-1 ), heat generating sources in magnetic hyperthermia (specific absorption rate, SAR>200 W g-1 Fe ), and magnetically responsive drug delivery vehicles. The potential of the designed formulations as theranostic agents was validated in vitro and results indicated a synergistic thermo/chemotherapeutic effect derived from heat generation and controlled drug delivery to cancer growth. Thereby, this external control over the drug delivery profile and the integrated imaging capability open the door to personalized cancer medicine and real-time monitoring of tumor progression.

The Combination of Dimorphandra gardneriana Galactomannan and Mangiferin Inhibits Herpes Simplex and Poliovirus.

BACKGROUND: Herpes simplex virus (HSV) and poliovirus (PV) are both agents of major concern in the public health system. It has been shown that Dimorphandra gardneriana galactomannans can be used as solubilizer vehicles in the manufacturing of medicine. Mangiferin is the major constituent of Mangifera indica and presents multiple medicinal and biological activities. OBJECTIVE: This study assayed the effect of D. gardneriana galactomannan combined with mangiferin (DgGmM) against HSV-1 and PV-1. METHODS: The DgGmM cytotoxicity was evaluated by the colorimetric MTT method and the antiviral activity by plaque reduction assay, immunofluorescence and polymerase chain reaction (PCR), in HEp-2 cells. RESULTS: The DgGmM showed a 50% cytotoxic concentration (CC50) > 2000 µg/mL. The 50% inhibitory concentrations (IC50) for HSV-1 and PV-1 were, respectively, 287.5 µg/mL and 206.2 µg/mL, with selectivity indexes (SI) > 6.95 for the former and > 9.69 for the latter. The DgGmM time-ofaddition protocol for HSV-1 showed a maximum inhibition at 500 µg/mL, when added concomitantly to infection and at the time 1 h post-infection (pi). While for PV-1, for the same protocol, the greatest inhibition, was also observed concomitantly to infection at 500 µg/mL and at the times 4 h and 8 h pi. The inhibition was also demonstrated by the decrease of fluorescent cells and/or the inhibition of specific viral genome. CONCLUSION: These results suggested that the DgGmM inhibited HSV-1 and PV-1 replication, with low cytotoxicity and high selectivity and, therefore, represents a potential candidate for further studies on the control of herpes and polio infections.

Characterization and antiherpetic activity of native and chemically sulfated polysaccharide from Adenanthera pavonina.

The herpes simplex virus (HSV) is a widespread human pathogen and for many reasons the development of anti-herpetic drugs from natural products has been encouraged. Adenanthera pavonina (Ap) is a medicinal plant widely used in Brazil, among other uses. Herein, a native Ap seed polysaccharide (PLSAp) and its chemically sulfated derivate (SPLSAp) were studied by Fourier transform IR spectra (FT-IR), gel permeation chromatography (GPC) for molar mass determination and their intrinsic viscosity [η]. Biologically, the compounds were evaluated for anti-HSV activity, in HEp2 cell cultures. The cytotoxic concentrations (CC50) and the inhibitory concentrations (IC(50)) of the polysaccharides were determined by the colorimetric assay (dimethyl-thiazolyl-diphenyltetrazolium bromide) and plaque reduction assay (PRA), respectively. The SPLSAp showed a better antiviral activity when compared to the PLSAp with a CC(50) of 500 µg/ml, the IC(50) equal to 15 µg/ml and the selectivity index (SI) of 33.3. The time-of-addition and the time-of-removal assays demonstrated the highest inhibitory activity between 8-16h after the infection. The inhibition of viral DNA and protein syntheses by SPLSAp monitored by PCR and immunofluorescence assay (IFA), respectively, has also demonstrated. These findings demonstrated that the SPLSAp inhibited HSV-1 infection in different steps of the replication and, therefore, represents a valuable compound for preclinical studies in anti-herpetic therapy.

Chitosan/mangiferin particles for Cr(VI) reduction and removal.

In this work, chitosan/mangiferin particles (CMP) were prepared by spray-drying technique and characterized by SEM, DLS, FTIR, HPLC-UV and adsorption studies to investigate a possible application as a preventive material in cases of human and animal contamination with Cr(VI). CMP presented sizes ranging from nano to micrometers. Chitosan and mangiferin (MA) presence in the powder was confirmed by FTIR and MA quantification (136 µg/mg) was performed using a calibration curve prepared by HPLC-UV. Adsorption capacity of Cr(VI) onto CMP was compared with chitosan and investigated in a batch system by considering the effects of various parameters like contact time, initial concentration of adsorbent and pH. Cr(VI) removal is pH dependent and it was found to be maximum at pH 5.0. The results showed that CMP has a potential application as a preventive material in cases of human or animal contamination with Cr(VI).

Magnetic nanosystem for cancer therapy using oncocalyxone a, an antitomour secondary metabolite isolated from a Brazilian plant.

This paper describes the investigation and development of a novel magnetic drug delivery nanosystem (labeled as MO-20) for cancer therapy. The drug employed was oncocalyxone A (onco A), which was isolated from Auxemma oncocalyx, an endemic Brazilian plant. It has a series of pharmacological properties: antioxidant, cytotoxic, analgesic, anti-inflammatory, antitumor and antiplatelet. Onco A was associated with magnetite nanoparticles in order to obtain magnetic properties. The components of MO-20 were characterized by XRD, FTIR, TGA, TEM and Magnetization curves. The MO-20 presented a size of about 30 nm and globular morphology. In addition, drug releasing experiments were performed, where it was observed the presence of the anomalous transport. The results found in this work showed the potential of onco A for future applications of the MO-20 as a new magnetic drug release nanosystem for cancer treatment.

Potential inhibitory effect of LASSBio-596, a new thalidomide hybrid, on inflammatory corneal angiogenesis in rabbits.

AIMS: Evaluate the effect of LASSBio-596, structurally designed as a new hybrid of thalidomide, on inflammatory corneal angiogenesis. METHODS: Eighteen rabbits were submitted to an alkaline cauterization in the right cornea. The animals were randomly allocated to three groups: vehicle, dexamethasone and LASSBio-596. Drugs were administered by eyedrops 3 times a day for 21 days. Evaluations were performed on days 3, 6, 9, 12, 15, 18 and 21 after cauterization. At these time points, digital images of the cornea were captured in a standard fashion. The angiogenic response was measured using software that was developed specifically for this purpose. It calculated the following parameters: neovascularization area (NA), total vascular length (TVL) and blood vessel number (BVN). RESULTS: It was observed that dexamethasone significantly decreased NA, TVL and BVN during all assessments. From the NA the angiogenesis rate (AR) was calculated in each group. Therefore, dexamethasone completely inhibited the inflammatory corneal angiogenesis with an AR of -0.001 ± 0.006 mm(2)/day, which was significantly lower (p < 0.001) than that observed after treatment with vehicle (0.078 ± 0.024 mm(2)/day) and LASSBio-596 (0.054 ± 0.012 mm(2)/day). Although LASSBio-596 reduced angiogenesis in relation to vehicle, according to NA, TVL and BVN values, this difference was not statistically significant. However, it was found that the AR as measured in the LASSBio-596 group was significantly lower (p < 0.05) than that seen in control animals, indicating a potential antiangiogenic effect. CONCLUSION: We conclude that topical application of LASSBio-596 at 1.0% has a potential inhibitory effect on inflammatory corneal angiogenesis in rabbits.

Solubilisation capacity of Brij surfactants.

The aim of this study was to investigate the potential of selected Brij non-ionic surfactants for enhancing the solubility of poorly water-soluble drugs. Griseofulvin was selected as a model drug candidate enabling comparisons to be made with the solubilisation capacities of other poly(ethylene oxide)-based copolymers. UV/Vis and (1)H NMR spectroscopies were used to quantify the enhancement of solubility of griseofulvin in 1 wt% aqueous micellar solutions of Brij 78 (C(18)H(37)E(20)), Brij 98 (C(18)H(35)E(20)) and Brij 700 (C(18)H(37)E(100)) (where E represents the OCH(2)CH(2) unit of the poly(ethylene oxide) chain) at 25, 37 and 40 °C. Solubilisation capacities (S(cp) expressed as mg griseofulvin per g Brij) were similar for Brij 78 and 98 (range 6-11 mg g(-1)) but lower for Brij 700 (3-4 mg g(-1)) as would be expected for the surfactant with the higher ethylene oxide content. The drug loading capacity of micelles of Brij 78 was higher than many di- and triblock copolymers with hydrophilic E-blocks specifically designed for enhancement of drug solubility.

Effect of water-soluble polymers, polyethylene glycol and poly(vinylpyrrolidone), on the gelation of aqueous micellar solutions of Pluronic copolymer F127.

The micellization of F127 (E(98)P(67)E(98)) in dilute aqueous solutions of polyethylene glycol (PEG6000 and PEG35000) and poly(vinylpyrrolidone) (PVP K30 and PVP K90) is studied. The average hydrodynamic radius (r(h,app)) obtained from the dynamic light scattering technique increased with increase in PEG concentration but decreased on addition of PVP, results which are consistent with interaction of the micelles with PEG and the formation of micelles clusters, but no such interaction occurs with PVP. Tube inversion was used to determine the onset of gelation. The critical concentration of F127 for gelation increased on addition of PEG and of PVP K30 but decreased on addition of PVP K90. Small-angle X-ray scattering (SAXS) was used to show that the 30 wt% F127 gel structure (fcc) was independent of polymer type and concentration, as was the d-spacing and so the micelle hard-sphere radius. The maximum elastic modulus (G(max)(')) of 30 wt% F127 decreased from its value for water alone as PEG was added, but was little changed by adding PVP. These results are consistent with the packed-micelles in the 30 wt% F127 gel being effectively isolated from the polymer solution on the microscale while, especially for the PEG, being mixed on the macroscale.

The effect of water-soluble polymers, PEG and PVP, on the solubilisation of griseofulvin in aqueous micellar solutions of Pluronic F127.

The purpose of this study was to investigate the possibility of enhancing the solubilisation capacity of micellar solutions of Pluronic F127 for the poorly water-soluble drug griseofulvin by co-formulating with a water-soluble polymer. The effect of the addition of the polyethylene glycols PEG6000 and 35000, and the poly(vinylpyrrolidone)s PVP K30 and K90, on the solubilisation capacity of 1wt% solutions of Pluronic F127 was related to the effect of these additives on particle size as determined by dynamic light scattering measurements. The addition of PEG35000 to 1wt% F127 solutions significantly increased the solubility capacity expressed in terms of unit weight of F127; PVP K90 had a smaller effect but no enhancement was noted following the addition of PEG6000 or PVP K30. Solubilisation enhancement was thought to be a consequence of the association of the polymers with the E-blocks of the micelle corona so providing an expanded region of reduced polarity for drug solubilisation.

The effect of polymeric additives on the solubilisation of a poorly-soluble drug in micellar solutions of Pluronic F127.

The solubilisation of griseofulvin in 1wt% aqueous micellar solutions of Pluronic F127 at 37°C has been modified by adding polyethylene glycol PEG 35000 or poly(vinylpyrrolidone) PVP K30. The solubilisation capacity expressed in terms of unit weight of F127 is increased by the addition of 0.5wt% PEG 35000 to a value approaching double that of a 2.5wt% solution of F127 alone, but there is no advantage in adding 0.5wt% PVP K30.

The effect of n-, s- and t-butanol on the micellization and gelation of Pluronic P123 in aqueous solution.

In dilute aqueous solution unimers of copolymer P123 (E(21)P(67)E(21)) associate to form micelles, and in more concentrated solution micelles pack to form high-modulus gels. We are interested in the use of the system as a templating agent in the synthesis of mesoporous materials, and the possibility of determining gel structure, hence mesoporosity, by use of n-, s- or t-butanol. Dynamic light scattering from clear dilute solutions has been used to confirm micellization, visual observation of mobility (tube inversion) to detect gel formation in concentrated solutions, oscillatory rheometry to confirm gel formation and provide values of elastic moduli over a wide temperature range, and small-angle X-ray scattering to determine gel structure. As expected, clear cubic gels (fcc) formed at moderate concentrations and temperatures, e.g. 30 wt.% P123, 20°C, and clear hexagonal gels at higher concentrations and temperatures. The transition on heating from cubic to hexagonal gel involved an intermediate turbid phase in which cubic and hex structures coexisted. Considering cubic gels of 35 wt.% P123 in 5 wt.% butanol/water, those in n-butanol/water had the lowest critical temperatures for gel formation and the highest maximum values for the dynamic elastic modulus (G') of the gels, a result consistent with n-butanol/water being the poorest solvent for P123.

Effect of ethanol on the gelation of aqueous solutions of Pluronic F127.

In dilute aqueous solution unimers of copolymer F127 (E(98)P(67)E(98)) associate to form micelles, and in more concentrated solution micelles pack to form high-modulus gels. Cosolvents are known to affect these processes, and ethanol/water mixtures have been of particular interest. Dynamic light scattering from dilute solutions was used to confirm micellization, but major attention was directed towards the gels. Visual observation of mobility (tube inversion) was used to detect gel formation, oscillatory rheometry to confirm gel formation and provide values of the elastic moduli over a wide temperature range, and small-angle X-ray scattering to determine gel structure. The solvents were limited to 10, 20 and 30 wt.% ethanol/water. Critical concentrations for gel formation were similar for 10 and 20 wt.% ethanol/water but were significantly increased for 30 wt.% ethanol/water, e.g. at T=45 degrees C from c approximately 15 wt.% to c approximately 28 wt.%. The elastic moduli reached maximum values at T approximately 50 degrees C: e.g. G' approximately 25 kPa for 25 wt.% F127 in 10 and 20 wt.% ethanol/water and a similar value for 30 wt.% F127 in 30 wt.% ethanol/water. Hard gels of 30 and 35 wt.% F127 in ethanol/water at 25 and 40 degrees C had the body-centered cubic (bcc) structure.

Xylan from corn cobs, a promising polymer for drug delivery: production and characterization.

Although many authors have reported several beneficial effects ascribed to xylan, such as inhibitory action on mutagenicity activity, antiphlogistic effects, and mitogenic and comitogenic activities, few papers have investigated a systematic study on the technological properties of this polymer. The aim of the present work was to evaluate xylan as a promise raw material for the pharmaceutical industry. The water-insoluble xylan samples were extracted from corn cobs following several steps. The obtained powered sample was analyzed by infrared and RMN spectroscopy, and characterized regarding their particle size, bulk and tap densities, compressibility index, compactability, Hausner ratio, and angle of repose. According to the results, infrared and RMN spectroscopy were shown to be able to evaluate the xylan structural conformation and composition, respectively. In addition, rheological data demonstrated that xylan powder obtained from corn cobs may be characterized as a material with low density and very cohesive flow properties.

Insecticidal action of sodium anacardate from Brazilian cashew nut shell liquid against Aedes aegypti.

Aedes aegypti is the major vector of 1 of the most concerning arboviruses of the world, the dengue fever. The only effective way of reducing the incidence of dengue fever is to control the vector mosquito, mainly by application of insecticides to its breeding places. This study was aimed at assessing the insecticidal activity of sodium anacardate, isolated from Brazilian cashew nut shell liquid (CNSL), against the eggs, 3rd instars or pupae of Ae. aegypti. In addition, the acute toxicity of sodium anacardate to mice was also investigated. Sodium anacardate showed toxicity against Ae. aegypti eggs (median effective concentration [EC50] = 162.93 +/- 29.93 microg/ml), larvae (median lethal concentration [LC50] = 55.47 +/- 3.0 microg/ml) and pupae (LC50 = 369.78 - 52.30 microg/ml). On the other hand, even at high dose (0.3 g/kg body weight), this compound did not cause any adverse effects on mice, suggesting that this compound is safe to mammals. Therefore, sodium anacardate may be a viable low-cost alternative to help combat Ae. aegypti.

Aqueous gels of mixtures of ionic surfactant SDS with pluronic copolymers P123 or F127.

Gel diagrams based on tube inversion and oscillatory rheometry are reported for Pluronic copolymers F127 (E(98)P(67)E(98)) and P123 (E(21)P(67)E(21)) in mixtures with anionic surfactant sodium dodecyl sulfate (SDS). Total concentrations (c, SDS+copolymer) were as high as 50 wt % with mole ratios SDS/copolymer (mr) in the ranges 1-5 (F127) and 1-7 (P123). Temperatures were as high as 90 degrees C. Determination of the temperature dependences of the dynamic moduli served to confirm the gel boundaries from tube inversion and to reveal the high elastic moduli of the gels, e.g., compared at comparable positions in the gel phase, a 50 wt % SDS/P123 with mr = 7 had G' three times that of a corresponding gel of P123 alone. Small-angle X-ray scattering (SAXS) was used to show that the structures of all the SDS/F127 gels were bcc and that the structures of the SDS/P123 gels with mr = 1 were either fcc (c = 30 wt %) or hex (c = 40 wt %). Assignment of structures to SDS/P123 gels with values of mr in the range 3-7 was more difficult, as high-order scattering peaks could be very weak, and at the higher values of c and mr, the SAXS peaks included multiple reflections.

Solubilisation of griseofulvin, quercetin and rutin in micellar formulations of triblock copolymers E62P39E62 and E137S18E137.

The solubilisation of two poorly soluble flavonoids, quercetin and rutin, in micellar solutions of mixtures of a block copolymer of ethylene oxide and styrene oxide (E(137)S(18)E(137)) with one of ethylene oxide and propylene oxide (E(62)P(39)E(62)) has been studied at 25 and 37 degrees C. Solubilisation capacities were higher than those for the model poorly water-soluble drug griseofulvin and comparable with published values for the solubilisation of rutin by beta-cyclodextrin.