The Effect of Calcium Hydroxide Pastes on Isolated Vital Nerve Fibers.

INTRODUCTION: Calcium hydroxide pastes (CHPs), commonly used for disinfecting root canals during endodontic treatment, are generally considered safe. However, accidental extrusions result in minimal injuries and little to no discomfort, except when extruded pastes come into contact with nerve bundles, such as the inferior alveolar nerve. Currently, there is a lack of information about the possible role of specific paste vehicles on the extent of nerve injury. The purpose of this study was to compare the role that paste vehicles, such as water or methylcellulose, may play when nerve fibers are exposed to CHP. METHODS: Isolated sciatic nerves of Sprague-Dawley rats were exposed to either water-based or methylcellulose-based CHP for varying durations of time (30, 60, or 90 minutes). Histopathological changes, including axonal edema, myelin alterations, and loss of cellular outlines, were assessed, and the degrees of changes were compared using chi-square intraclass correlation coefficient tests. RESULTS: Both groups exposed to the pastes demonstrated varying degrees of histopathologic changes, including axonal edema, myelin changes, and loss of cellular outlines, at different exposure times. The water-based calcium hydroxide paste induced these changes more rapidly than the methylcellulose-based paste. Similar patterns were observed in the scanning electron microscopic findings. Exposure time emerged as an important difference in the effects of the 2 pastes. In each of these tests, all observations of water-based paste exposure were rated as moderate to severe, whereas the observed cellular changes (axonal, myelin, and intact cellular outline) were rated as mild to moderate after exposure to methylcellulose-based paste for the same exposure durations. The chi-square tests indicated a statistically significant association between the material and each of the outcomes (axonal changes: χ²15 = 81.0, P < .001; myelin changes: χ²15 = 81.0, P < .001; intact cellular outline, χ²15 = 81.0, P < .001). The intraclass correlation coefficient value was 0.93. CONCLUSIONS: The study demonstrates that axonal and myelin damage increase with longer exposure times, with water-based CHP causing more damage than methylcellulose-based CHP at each time point.

Data management practices of cone beam computed tomography volumes: An exploratory user survey.

OBJECTIVE: The aim of this study was to query cone beam computed tomography (CBCT) users about their storage and transfer practices to identify trends in the handling of CBCT data in dentistry. STUDY DESIGN: A computer-based survey was distributed to 2 CBCT user groups. The survey consisted of 18 questions on settings for data capture, data storage, archiving strategies, bit depth/compression, monitoring user access to patient information, and dissemination to end users. All information was anonymously collected. Descriptive data and frequency patterns were collected and discussed. RESULTS: A total of 68 surveys were returned, with 56 fully completed. Results reflected a low consensus about usage and management of radiographic data sets. Some preferential usage patterns, however, were noted along with the following trends: (1) 53% of respondents utilized Digital Imaging and Communications in Medicine volumetric data sets for initial storage. (2) 46% of respondents saved data in raw or native file formats. (3) 60% of storage sites were in onsite servers. (4) 35% of volumes saved were in a "Zip" compression format. (5) 37% of respondents used a picture archiving and communication system for storage. CONCLUSIONS: The absence of consensus on postcapture management of volumetric data sets indicates that a dentistry-wide data management standard would benefit patient care while mitigating information technology storage issues.

Effect of image sharpening on radiographic image quality.

STATEMENT OF PROBLEM: The image sharpening algorithm, unsharp masking (USM), may cause artifacts that reduce the diagnostic value of digital images. It may create overshoot artifacts that can be misdiagnosed as pathosis or prosthesis misfit. The effect of this image sharpening and the extent of overshoot artifacts on image quality requires investigation. PURPOSE: The purpose of this in vitro study was to evaluate the effect of USM on digital dental radiographic quality and to demonstrate the extent of overshoot artifacts. MATERIAL AND METHODS: Three digital sensors (2 complementary metal-oxide-semiconductors and 1 photostimulable phosphor) were exposed using a digital dental quality assurance imaging phantom to evaluate contrast resolution, spatial resolution, and dynamic range. The 3 sensors were again exposed without the phantom to determine the degree of radiographic noise. Each image was sharpened and then highly sharpened. Overshoot was measured, and images were compared using the Friedman 2-way ANOVA analysis. RESULTS: Image sharpening significantly affected spatial resolution and noise. Conversely, dynamic range and contrast resolution were not significantly affected by image sharpening. Overshoot artifacts increased with image sharpening. CONCLUSIONS: Image sharpening improves visual image quality but significantly increases overshoot artifacts that adversely affect radiographic diagnosis. Data from this study indicate that image sharpening causes artifacts that could negatively affect accurate diagnosis.

Prevalence and Size of Periapical Radiolucencies Using Cone-beam Computed Tomography in Teeth without Apparent Intraoral Radiographic Lesions: A New Periapical Index with a Clinical Recommendation.

INTRODUCTION: The purpose of this study was to determine the prevalence and size of periapical radiolucencies using cone-beam computed tomographic (CBCT) imaging in teeth without apparent signs of intraoral radiographic lesions. METHODS: One hundred twenty roots from 53 patients who had been determined to have no signs of intraoral radiographic lesions were included in this study. Limited-volume CBCT scans were taken at 0.125-mm3 voxel size. The widest area of apical radiolucency of each root canal-treated tooth was measured and assigned a numeric score based on the CBCT-Endodontic Radiolucency Index (ERI). CBCT data were evaluated by 2 radiologists with an interclass correlation coefficient of 0.96. RESULTS: The majority of roots (53.3%) had periodontal ligament widths ≤0.5 mm; 26.7% had radiolucency widths of 0.5 < x ≤ 1 mm, 15.0% had radiolucency widths of 1.0 < x ≤ 1.5 mm, 0.8% had radiolucency widths of 1.5 < x ≤ 2.0 mm, 1.7% had radiolucency widths of 2.0 < x ≤ 2.5 mm, and 2.5% had radiolucency widths of >2.5 mm. Patient age, recall interval, tooth type, and arch type had no statistically significant effect on the ERI distribution. CONCLUSIONS: Twenty percent of teeth with successful root canal treatment based on conventional periapical imaging had CBCT radiolucencies measuring greater than 1 mm. Because these radiolucencies may not be pathological changes, clinicians are cautioned against overtreatment of them before determining the true nature of these findings. Clinical studies with long follow-up times are needed to determine the proper course of actions for these cases.

Accuracy of Implants Placed with Surgical Guides: Thermoplastic Versus 3D Printed.

This study was conducted to evaluate the accuracy of implants placed using two different guided implant surgery materials: thermoplastic versus three-dimensionally (3D) printed. A cone beam computed tomography (CBCT) scan previously obtained and selected for single-tooth implant replacement was converted into a Digital Imaging and Communications in Medicine (DICOM) file. All models were planned and exported for printing using BlueSkyBio Plan Software with the DICOM files. A total of 20 3D-printed mandibular quadrant jaws replicating the CBCT were printed by Right Choice Milling, as was the control model to accept the control implant. Previously, 10 thermoplastic and 10 3D-printed surgical guides had been made by the same lab technician at Right Choice Milling. One Nobel Biocare implant with a trilobe connection was placed per guide and replica jaw model pair. Implants were placed using the thermoplastic and 3D-printed surgical guides, representing the two test groups, following the Nobel Biocare guided surgical protocol. A total of 21 CBCT scans were then taken, one for the control implant and one for each test implant. The CBCT volume was converted to a DICOM file and transferred to Invivo5 software version 5.4 (Anatomage). The DICOM file of each test implant was superimposed over the DICOM file of the control. The deviation of the head of the implant, the deviation of the apex of the implant, and the angle of deviation were evaluated from measurements on the superimposition of the control and test implants. Mann-Whitney U test was used to test the null hypotheses at α = .05 and a confidence interval of 95%. Descriptive statistics were used for the average ± standard deviation. The implants placed with the thermoplastic surgical guides showed an average of 3.40 degrees of angular deviation compared to 2.36 degrees for implants placed with the 3D-printed surgical guides (P = .143). The implants placed with the thermoplastic surgical guides showed an average of 1.33 mm of deviation at the head of the implant compared to 0.51 mm for implants placed with the 3D-printed surgical guides (P < 0.001). The implants placed with the thermoplastic surgical guides showed an average of 1.6 mm of deviation at the apex of the implant compared to 0.76 mm for implants placed with the 3D-printed surgical guides (P < .001). There was no significant difference in the angular deviations of implants placed with thermoplastic surgical guides compared to those placed with the 3D-printed surgical guide. However, the locations of the implant head and implant apex were significantly more accurate for the implants placed with the 3D-printed surgical guides compared to those placed with the thermoplastic surgical guides.

The Influence of Adalimumab on the Healing of Apical Periodontitis in Ferrets.

INTRODUCTION: Given the increasing use of anti-tumor necrosis factor α (anti-TNFα) biologic medications, and their interferences with the immune-inflammatory response, this study evaluated the effect of adalimumab (anti-TNFα), on healing and healing time of apical periodontitis (AP) in ferrets. METHODS: Twelve male ferrets received cone beam computed tomography of the jaws at baseline health (T0); AP confirmation (T1); and 30 (T2), 60 (T3), and 90 (T4) days after root canal treatment (RCT) to monitor healing. All animals had AP induced in the canines; 3 ferrets (12 teeth) provided the positive controls for the histologic evaluation; 9 ferrets were randomly divided into 3 treatment groups with 12 teeth each in the following manner: Systemic: conventional RCT and systemic anti-TNFα; Local: RCT and periapical administration of anti-TNFα before canal obturation; conventional RCT only (control). Two calibrated radiologists assessed the cone beam computed tomography images independently and blindly for AP identification and quantification. Rank-based analysis of covariance was used for statistical analysis of lesion size. RESULTS: AP was induced in all teeth. Following RCT, all AP lesions in the 3 groups showed a significant reduction in size. Specific pairwise comparisons of the related samples (Friedman's 2-way analysis of variance by ranks within each group) demonstrated a decreasing trend in lesion size with healing time in all 3 groups, most pronounced for local group (local adalimumab). No statistical difference was noticed between groups. CONCLUSIONS: Both systemic and local anti-TNFα did not hinder AP healing in this animal model and a faster healing response may also be anticipated. These findings encourage follow-up studies with larger sample sizes.

Benign Fibro-Osseous Lesions of the Jaws.

Fibro-osseous lesions are grouped together because histologically they show similar cellular and mineralization patterns. Despite the histologic ubiquity, their behaviors vary significantly. Because of the histologic similarity and the broad range of morbidity among them, it is important to be able to differentiate between them in the preliminary diagnostic process. The radiographic presentations along with the location of the bony changes are often extremely critical diagnostic features to help render a differential or working diagnosis in lieu of an automatic biopsy procedure. Therefore the unique and specific radiographic presentations may be one of the main criteria for preliminary diagnosis.

Basic principles of cone beam computed tomography.

At the end of the millennium, cone-beam computed tomography (CBCT) heralded a new dental technology for the next century. Owing to the dramatic and positive impact of CBCT on implant dentistry and orthognathic/orthodontic patient care, additional applications for this technology soon evolved. New software programs were developed to improve the applicability of, and access to, CBCT for dental patients. Improved, rapid, and cost-effective computer technology, combined with the ability of software engineers to develop multiple dental imaging applications for CBCT with broad diagnostic capability, have played a large part in the rapid incorporation of CBCT technology into dentistry.