Biobased epoxy reactive diluents prepared from monophenol derivatives: effect on viscosity and glass transition temperature of epoxy resins.

The use of reactive diluents is undeniably of paramount importance to develop epoxy resins which would meet more demanding and restrictive processes and applications in terms of viscosity and glass transition temperature. In the context of developing resins with low carbon impacts, 3 natural phenols namely carvacrol, guaiacol and thymol were selected and converted into monofunctional epoxies using a general glycidylation procedure. Without advanced purification, the developed liquid-state epoxies showed very low viscosities of 16 cPs to 55 cPs at 20 °C, which could be further reduced to 12 cPs at 20 °C when purification by distillation is applied. The dilution effect of each reactive diluent on DGEBA's viscosity was also assessed for concentrations ranging from 5 to 20 wt% and compared to commercial and formulated DGEBA-based resin analogues. Interestingly, the use of these diluents reduced the initial viscosity of DGEBA by a factor of ten while maintaining glass transition temperatures above 90 °C. This article provides compelling evidence of the possibility of developing new sustainable epoxy resins with characteristics and properties that can be fine-tuned by only adjusting the reactive diluent concentration.

Impact of the Force Field on the Calculation of Density and Surface Tension of Epoxy-Resins.

The molecular simulation of interfacial systems is a matter of debate because of the choice of many input parameters that can affect significantly the performance of the force field of reproducing the surface tension and the coexisting densities. After developing a robust methodology for the calculation of the surface tension on a Lennard-Jones fluid, we apply it with different force fields to calculate the density and surface tension of pure constituents of epoxy resins. By using the model that best reproduces the experimental density and surface tension, we investigate the impact of composition in mass fraction on uncured epoxy resins and the effects of degree of cross-linking on cured resins.

Selection in Early Generations to Shift Allele Frequency for Seminal Root Angle in Wheat.

A current challenge for plant breeders is the limited ability to phenotype and select for root characteristics to enhance crop productivity. The development of a high-throughput phenotyping method has recently offered new opportunities for the selection of root characteristics in breeding programs. Here, we investigated prospects for phenotypic and molecular selection for seminal root angle (SRA), a key trait associated with mature root system architecture in wheat ( L.). We first investigated genetic diversity for this trait in a panel of 22 wheat lines adapted to Australian environments. The angle between the first pair of seminal roots ranged from 72 to 106°. We then evaluated selection gain via direct phenotypic selection in early generations by comparing the resulting shift in population distribution in tail populations selected for "narrow" and "wide" root angle. Overall, two rounds of selection significantly shifted the mean root angle as much as 10°. Furthermore, comparison of allele frequencies in the tail populations revealed genomic regions under selection, for which marker-assisted selection appeared to be successful. By combining efficient phenotyping and rapid generation advance, lines enriched with alleles for either narrow or wide SRA were developed within only 18 mo. These results suggest that there is a valuable source of allelic variation for SRA that can be harnessed and rapidly introgressed into elite wheat lines.

Genomic Regions Influencing Seminal Root Traits in Barley.

Water availability is a major limiting factor for crop production, making drought adaptation and its many component traits a desirable attribute of plant cultivars. Previous studies in cereal crops indicate that root traits expressed at early plant developmental stages, such as seminal root angle and root number, are associated with water extraction at different depths. Here, we conducted the first study to map seminal root traits in barley ( L.). Using a recently developed high-throughput phenotyping method, a panel of 30 barley genotypes and a doubled-haploid (DH) population (ND24260 × 'Flagship') comprising 330 lines genotyped with diversity array technology (DArT) markers were evaluated for seminal root angle (deviation from vertical) and root number under controlled environmental conditions. A high degree of phenotypic variation was observed in the panel of 30 genotypes: 13.5 to 82.2 and 3.6 to 6.9° for root angle and root number, respectively. A similar range was observed in the DH population: 16.4 to 70.5 and 3.6 to 6.5° for root angle and number, respectively. Seven quantitative trait loci (QTL) for seminal root traits (root angle, two QTL; root number, five QTL) were detected in the DH population. A major QTL influencing both root angle and root number (/) was positioned on chromosome 5HL. Across-species analysis identified 10 common genes underlying root trait QTL in barley, wheat ( L.), and sorghum [ (L.) Moench]. Here, we provide insight into seminal root phenotypes and provide a first look at the genetics controlling these traits in barley.

High-throughput phenotyping of seminal root traits in wheat.

BACKGROUND: Water availability is a major limiting factor for wheat (Triticum aestivum L.) production in rain-fed agricultural systems worldwide. Root system architecture has important functional implications for the timing and extent of soil water extraction, yet selection for root architectural traits in breeding programs has been limited by a lack of suitable phenotyping methods. The aim of this research was to develop low-cost high-throughput phenotyping methods to facilitate selection for desirable root architectural traits. Here, we report two methods, one using clear pots and the other using growth pouches, to assess the angle and the number of seminal roots in wheat seedlings- two proxy traits associated with the root architecture of mature wheat plants. RESULTS: Both methods revealed genetic variation for seminal root angle and number in the panel of 24 wheat cultivars. The clear pot method provided higher heritability and higher genetic correlations across experiments compared to the growth pouch method. In addition, the clear pot method was more efficient - requiring less time, space, and labour compared to the growth pouch method. Therefore the clear pot method was considered the most suitable for large-scale and high-throughput screening of seedling root characteristics in crop improvement programs. CONCLUSIONS: The clear-pot method could be easily integrated in breeding programs targeting drought tolerance to rapidly enrich breeding populations with desirable alleles. For instance, selection for narrow root angle and high number of seminal roots could lead to deeper root systems with higher branching at depth. Such root characteristics are highly desirable in wheat to cope with anticipated future climate conditions, particularly where crops rely heavily on stored soil moisture at depth, including some Australian, Indian, South American, and African cropping regions.

Effects of temperature and UV radiation increases on the photosynthetic efficiency in four scleractinian coral species.

Experiments were performed on coral species containing clade A (Stylophora pistillata, Montipora aequituberculata) or clade C (Acropora sp., Pavona cactus) zooxanthellae. The photosynthetic efficiency (F(v)/F(m)) of the corals was first assessed during a short-term increase in temperature (from 27 degrees C to 29 degrees C, 32 degrees C, and 34 degrees C) and acute exposure to UV radiation (20.5 W m(-2) UVA and 1.2 W m(-2) UVB) alone or in combination. Increasing temperature to 34 degrees C significantly decreased the F(v)/F(m) in S. pistillata and M. aequituberculata. Increased UV radiation alone significantly decreased the F(v)/F(m) of all coral species, even at 27 degrees C. There was a combined effect of temperature and UV radiation, which reduced F(v)/F(m) in all corals by 25% to 40%. During a long-term exposure to UV radiation (17 days) the F(v)/F(m) was significantly reduced after 3 days' exposure in all species, which did not recover their initial values, even after 17 days. By this time, all corals had synthesized mycosporine-like amino acids (MAAs). The concentration and diversity of MAAs differed among species, being higher for corals containing clade A zooxanthellae. Prolonged exposure to UV radiation at the nonstressful temperature of 27 degrees C conferred protection against independent, thermally induced photoinhibition in all four species.

Growth and photosynthesis of two Mediterranean corals, Cladocora caespitosa and Oculina patagonica, under normal and elevated temperatures.

The Ligurian Sea (NW Mediterranean) experienced warm summers in 1998, 1999 and from 2003 to 2005. The temperature was 1-3 degrees C higher than the mean summer value (24 degrees C) and remained high over a long period. During these summers, mass-mortality events, affecting several sessile benthic species, were reported. In the present study, we tested the long-term (3-7 weeks) effect of different temperatures (20 degrees C measured in spring and autumn, 24 degrees C observed in summer, and 26 degrees C and 28 degrees C abnormal summer values) on two Mediterranean corals, Cladocora caespitosa and Oculina patagonica. Growth rate, photosynthetic efficiency (Fv/Fm), relative electron transport rate (ETR), zooxanthellae and chlorophyll (chl) contents were measured during 48 days incubation. At 20 degrees C, all parameters remained constant during the whole experiment for both species. At higher temperatures, most physiological parameters were affected by only 2-5 weeks at 24 degrees C, and were severely depressed at higher temperatures. Small replicate samples (nubbins) of O. patagonica significantly decreased their zooxanthellae and chl concentrations at all temperatures, after 2 weeks of incubation. Their Fv/Fm values, as well as their growth rates, were also gradually reduced during the incubation at all temperatures. However, only a few nubbins maintained at 28 degrees C showed signs of tissue necrosis after 34 days, and these gradually recovered tissue when temperature was returned to normal. In nubbins of C. caespitosa, chl and zooxanthellae concentrations decreased only after 34 days of incubation at 26 degrees C and 28 degrees C. At the same time, tissue necrosis was observed, explaining the loss of the symbionts. Fv/Fm was reduced only after 34 days of incubation at the different temperatures, and growth rate was first enhanced, before collapsing by 30% at 24 degrees C and by 90-100% at 26 degrees C and 28 degrees C. All samples maintained at 26 degrees C and 28 degrees C had died, due to tissue necrosis, by the end of the experiment. Results obtained suggest that O. patagonica is more able than C. caespitosa to resist high temperature conditions because of its rapid bleaching capacity. In contrast, it seems that C. caespitosa is living close to its thermal limit during the summer period; therefore, a long-term increase at 24 degrees C or above could be lethal for this coral, just as was observed in situ during the recent warm summers.