Evaluation of radiographic fracture position 1 year after variable angle locking volar distal radius plating: a prospective multicentre case series.

Treatment with a variable angle locking plate can, in theory, maintain near anatomic reduction of intra-articular distal radius fractures, but it is unknown to what extent reduction is maintained as measured by computed tomography. We assessed changes in radiographic fracture position 1 year post-operatively. We included 73 patients of whom 66 patients (90%) had radiographs available for review at 1 year post-operatively. We found a small (less than 2 mm or 2°) but statistically significant change in several measures. Accounting for inter-observer variability, this is probably within measurement error. We found no difference in change in fracture position or range of motion, grip strength or patient-reported outcome between the use of one or two distal rows of screws. Our results show that minimal changes in reduction can be expected after volar plate fixation in most patients. We recommend using only one screw row routinely, limiting costs, surgical time and the risk of misplacement of screws. LEVEL OF EVIDENCE: IV.

Classification and treatment of distal radius fractures: a survey among orthopaedic trauma surgeons and residents.

PURPOSE: Classification, the definition of an acceptable reduction and indications for surgery in distal radius fracture management are still subject of debate. The purpose of this study was to characterise current distal radius fracture management in Europe. METHODS: During the European Congress of Trauma and Emergency Surgery (ECTES) 2015 a 20-question multiple-choice survey was conducted among the attending surgeons and residents of the hand and wrist session. Consensus was defined as more than 50 % identical answers (moderate consensus 50-75 % and high consensus more than 75 %). RESULTS: A total of 46 surgeons and residents participated in the survey. High consensus was found among both surgeons and residents for defining the AO/OTA classification as the preferred classification system. For the definition of an acceptable reduction, a moderate to high consensus could be determined. Overall, high consensus was found for non-operative treatment instead of operative treatment in dislocated extra- and intra-articular distal radius fractures with an acceptable closed reduction, regardless of age. We found high (surgeons) and moderate (residents) consensus on the statement that an intra-articular gap or step-off ≥2 mm, in patients younger than 65 years, is an absolute indication for ORIF. The same applied for ORIF in dislocated fractures without an acceptable closed reduction in patients younger than 75 years of age. CONCLUSION: Current distal radius fracture management in Europe is characterised by a moderate to high consensus on the majority of aspects of fracture management.

Four-Corner Concept: CT-Based Assessment of Fracture Patterns in Distal Radius.

Operative treatment using plate fixation is an important adjunct in the treatment of distal radius fractures, although the evidence for its superiority over other modalities remains limited. We propose a new concept for fractures of the distal radius, based on the three-column model of the distal radius, and on the expanding knowledge about the different fracture patterns obtained by evaluation of the distal radius by computed tomographic (CT) scan. All fracture types can be characterized by subdividing the wrist joint into four corners, each with its own characteristics in terms of mobility, stability, and transfer of forces in the intact distal radius. Recognition of the specific fracture types based on this four-corner concept enables a tailored approach to treatment.

[FLS - three letters alter secondary fracture prevention]. / FLS - Drei Buchstaben verändern die sekundäre Frakturprävention.

The increasing importance of preventive measures in the field of orthopedics and trauma surgery becomes apparent because of the demographic changes and the high risk for secondary fractures following osteoporotic fractures. Within the fracture treatment chain, orthopedics and trauma surgery are in the "pole position" to initiate these measures in geriatric patients. In the past orthopedists and trauma surgeons have constantly accused of neglecting secondary fracture prevention in fragility fracture patients. There are several reasons that speak in favor of us undertaking a role in secondary fracture prevention: osteoporosis medication is highly effective in fracture prevention when correctly indicated, the positive effects of osteoporosis therapy on fracture healing and legal issues. Arguments that have been used to justify neglect of secondary fracture prevention are undesired side effects related to osteoporosis medications, such as atypical femoral fractures and osteonecrosis of the jaws, interference of some specific drugs with fracture healing and the working conditions in emergency departments. These run contrary to the consideration of chronic diseases such as osteoporosis, secondary osteoporosis and the underlying disease could be overlooked and the increasing complexity of medicinal osteoporosis therapy. In the first part of the article these arguments are weighed against each other. In the second part the concept of a fracture liaison service (FLS) is discussed. The FLS framework now allows an active role to be taken with respect to secondary fracture prevention despite the busy daily routine schedule. Implementation of an FLS is facilitated by dedicated instruction protocols and programs. Self-financing of an FLS is currently possible only in some specific healthcare systems. In healthcare systems in German-speaking areas a cross-financing must be available and the value of an FLS indirectly presented. Apart from the financial aspects, implementation of a FLS is also worthwhile because it can be looked on as the future driving force of innovation.

Orthogeriatric care pathway: a prospective survey of impact on length of stay, mortality and institutionalisation.

INTRODUCTION: Care pathways for elderly hip fracture patients are increasingly implemented but there has been only limited evaluation of their use. Our objective was to investigate the impact of such a care pathway on the use of healthcare resources and on patients' outcomes. MATERIALS AND METHODS: The prospective survey covered 493 hip fracture patients 65 years of age or older that were treated either before "Usual Care = (UC)" or after "Co-Managed-Care = (CMC)" implementation of the care pathway. Primary outcome was length of stay (LoS). Secondary outcomes were 1-year mortality and change in residential status from prefracture baseline to 1-year after surgery. Data were analysed by descriptive and interferential statistics and adjustment for baseline differences amongst the two patient groups was done. RESULTS: Patients in the CMC sample had more preexisting comorbidities (CCI 2.5 versus 2.1). Prior to the fracture, a larger proportion amongst them needed help in ADL (49 versus 26%), and they were more likely to reside in a nursing home (36 versus 29%). Prefracture mobility status was equal in both samples. In the CMC sample LoS was significantly shorter (LoS 8.6 versus 11.3 days, p < 0.01) and patients were less likely to experience a complication (59 vs 73%, p < 0.01) while being in the hospital. There was no significant difference in 1-year mortality or in change of residential status. CONCLUSIONS: A care pathway for elderly hip fracture patients allowed decreased LoS without affecting mortality or change of residential status 1 year after fracture compared to prefracture baseline.

Recent aspects on outcomes in geriatric fracture patients.

As the population ages, the number of fragility fractures is expected to increase dramatically. These injuries are frequently associated with less than satisfactory outcomes. Many of the patients experience adverse events or death, and few regain their pre-injury functional status. Many also lose their independence as a result of their fracture. This manuscript will explore problems and some potential solutions to evaluate the outcomes of geriatric fracture care. Specific, system-wide, and societal concerns will be discussed. Limited suggestions will be made for future steps to improve outcomes assessments.

[Distal radius fractures: new concepts as basis for surgical treatment]. / Distale Radiusfraktur: neue Konzepte als Basis für die operative Therapie.

New advances in the biomechanics and pathomechanics of distal radius fractures as well as new generations of plates and improved surgical approaches now make possible the stable management and early functional rehabilitation not only of simple but also of complicated distal radius fractures according to the principles for articular and juxta-articular fractures. Especially for complex articular fractures, the fracture patterns are so heterogeneous that an individual surgical treatment strategy must be developed for each case. The preoperative clarification of articular fractures with computed tomography is particularly useful for planning surgery. Mental exposition with the three-column model and pathomechanics is an important prerequisite for understanding this type of injury and the appropriate choice of operative technique. A decisive factor for success is the subtle surgical procedure in approaching and handling the fine plates.

Locking compression plate with minimally invasive plate osteosynthesis in diaphyseal and distal tibial fracture: a retrospective study of 32 patients.

With the introduction of Locking Compression Plates (LCP), Minimally Invasive Plate Osteosynthesis (MIPO) has become widely used. The plates act as internal fixators in a bridging manner, thus resulting in secondary bone healing. We retrospectively evaluated the healing pattern and the clinical evolution of diaphyseal and distal tibial shaft fractures over two and a half years in 32 patients (6 females, 26 males). Fractures were classified according to AO classification and included all 42A-C, 43A-B and 43C1-2 types. For open fractures, Gustillo Anderson classification was used. Plates consisted of the 4.5mm LCP and 3.5mm LCP-Pilon form plate. Clinical and radiological assessment was performed at 6 weeks, and at 3, 6, 9, and 12 months. Two patients were lost to follow-up. Fracture healing was defined as callus bridging of one cortex, seen on both lateral and posterior-anterior X-ray, and full, painless weight bearing. Ten patients at 3 months, 23 at 6 months, and 27 at 9 months met the criteria for a healed fracture. Plate bending was observed in one patient and called for re-operation at 5 months. Two patients required re-operation at 13 months secondary to pseudoarthrosis. Though MIPO seems more advantageous for soft tissue and bone biology, prolonged healing was observed in simple fracture patterns when a bridging plate technique was used.

[Osteosynthesis of combined radius head and capitulum humeri fractures with mini-implants]. / Osteosynthese kombinierter Radiusköpfchen- und Capitulum humeri Frakturen mit Miniimplantaten.

INTRODUCTION: Combined injuries of the capitellum humeri and the radial head are rare. Most of them show combined osteocartilaginous lesions and collateral ligament lesions. Recommendations for treatment of these fatal injuries of the elbow are missing. TYPE OF STUDY: Five cases were investigated in an retrospective analysis. The same approach was used for the osteocartilaginous lesion of the capitellum as well as the injury of the radial head. Internal fixation was done with mini-titanimplants, three of them combined with resorbable pins. PATIENTS AND METHODS: Between 1996-1999 five patients (four men, one woman) with combined injury of the radial head and the capitellum were stabilized. The average age was 34 years (31-40 years). All fractures were stabilized by a direct radial approach with 1.5 mm or 2.0 mm lag screws partly with resorbable pins. All patients were evaluated radiologically and clinically according to the Mayo-elbow-performance score. RESULTS: All patients were personally examined after an average period of 12.8 month (8-24 month) by an independent investigator. 4/5 patients were assessed for their satisfaction. No radiological signs of avascular necrosis of the capitellum or arthrosis were found. Three patients showed periarticular calcifications. The range of motion was averagely 124 degrees (extension 5-30 degrees, flexion 110-145 degrees), in three of five cases a secondary intervention for improvement of joint mobility was necessary. The Mayo-elbow-performance score rated for 85 points in average (range 70-100 points). CONCLUSION: Direct screw fixation with mini-implants, eventually combined with resorbable pins allows to use the same approach for anatomic reconstruction and fixation of the capitellum humeri and radial head. Transarticular fragment fixation of the capitellum allows for safe compression. Therefore early functional rehabilitation is possible postoperatively. Secondary interventions for improve joint motion were necessary in three of five cases.

[Management of complex distal radius fractures]. / Management komplexer distaler Radiusfrakturen.

Complex injuries of the distal radius can be associated with articular comminution, severe soft tissue injury, large metaphyseal and/or diaphyseal bone defects, carpal ligament tears or its combinations. We recommend a standardized three step approach for the management of these severe injuries: external fixation as an emergency procedure; treatment of soft tissue damage and further diagnostics as needed; definitive adapted operative therapy after thorough analysis of the specific injury.

[Dorsal double plating for fractures of the distal radius--a biomechanical concept and clinical experience]. / Die dorsale Doppelplattenosteosynthese am distalen Radius--ein biomechanisches Konzept und dessen klinische Realisation.

This article describes the anatomical and biomechanical rationale for stable internal fixation of distal radius fractures using a dorsal approach. The three column biomechanical model is illustrated. Advances in the understanding of the anatomy, the biomechanical model of the three columns and our clinical experience with dorsal double plating have lead to the development of a new set of precontoured 2.4 mm Titanium plates with the option for head locking screws.

[New concepts for stabilizing proximal humeral fractures]. / Neue Stabilisierungskonzepte bei proximalen Humerusfrakturen.

The treatment of proximal humerus fractures is overshadowed by problems like avascular humeral head necrosis, implant failure in osteopenic bone and moderate outcome, especially in the elderly. More precise imaging, a better understanding of the vascularity of the humeral head leading to indirect reduction techniques and new implants which allow for saver fixation even in osteopenic bone, allowing early functional aftercare, are the new promising factors which have the potential to ameliorate fracture treatment of the humeral head. A prerequisit for sucessful treatment is a thoroughful imaging which allows adequate preoperative planning. The type of stabilisation depends more on the surgeons preference and there are pros and cons with all implants. Functional after treatment however depends on the applied stabilisation principle and should be carefully monitored and adapted according to the bone healing process, monitored by regular postoperative x-ray controls.

[New principles in the surgical treatment of distal radius fractures -- locking implants]. / Neue Prinzipien der operativen Behandlung von distalen Radiusfrakturen--winkelstabile Implantate.

The treatment goal for fractures of the distal end of the radius is full functional recovery of the wrist. Prerequisites are restoration of the anatomy and early functional after treatment in accordance to the treatment guidelines for other articular and juxta-articular fractures. A better understanding of the anatomy and new biomechanical models lead to the development of new implants and operative techniques. The LCP-concept with locking screws had a considerable impact on recent advances in the operative treatment of distal radius fractures.

Fractures of the distal radius treated by internal fixation and early function. A prospective study of 73 consecutive patients.

Stable fixation of fractures of the distal radius can be achieved by using two 2.0 mm titanium plates placed on the radial and intermediate columns angled 50 degrees to 70 degrees apart. We describe our results with this method in a prospective series of 74 fractures (58 severely comminuted) in 73 consecutive patients. Early postoperative mobilisation was possible in all except four wrists. All of the 73 patients, except two with other injuries, returned to work and daily activities with no limitations. The anatomical results were excellent or good in 72 patients and fair in one. Our discussion includes details of important technical considerations based on an analysis of the specific complications which were seen early in the series.

Comparison of three different plating techniques for the dorsum of the distal radius: a biomechanical study.

Three different plating techniques were used on experimentally produced dorsally displaced distal radius fractures in cadavers and were tested in 4-point bending: a AO 3.5-mm T plate (group 1), two 2. 0-mm titanium plates 60 degrees to each other (group 2), and the AO pi plate (group 3). A metaphyseal defect was simulated by a dorsally open wedge osteotomy. The tests show that the 2-mm double-plating technique has superior stiffness and statistically equivalent bending and bone gap to failure compared with the AO 3.5-mm T plate or the pi plate when applied to the unstable distal radius fracture model. (J Hand Surg 2000; 25A:29-33.

[Intramedullary nailing of humeral shaft fractures--initial experiences with an unreamed humerus nail]]. / Marknagelosteosynthese von Humerusschaftfrakturen--erste Erfahrungen mit dem unaufgebohrten Humerusnagel (UHN).

Interlocking intramedullary nailing has become the preferred method of internal fixation for diaphyseal fractures of the lower extremity. In shaft fractures of the humerus however open reduction and internal fixation with plates and screws is still considered the gold standard for operative treatment. The unreamed humerus nail (UHN) is a new implant for interlocking intramedullary nailing, which allows for stable fixation of humerus shaft fractures and immediate functional after treatment. The UHN could thus become an equal alternative to plate osteosynthesis. From this point of view we analyzed retrospectively 19 shaft fractures of the humerus, which have been treated at our institution with an UHN. Infections and iatrogenic nerve lesions did not occur. One patient with a rotational malalignment of 45 degrees underwent a secondary procedure. In two out of ten fresh fractures the bone healing failed and resulted in a non-union. In all cases of pathological fractures a good palliation could be achieved. With exception of two patients the range of motion of the shoulder and elbow was symmetric. We conclude that the UHN is a real alternative to plate osteosynthesis. Compared with most series of plate osteosynthesis published in the literature the risk for iatrogenic lesions of the radial nerve appears to be lower. Even in this small series we found however a rather high rate of non-unions.

A new ultrasound-based method for the assessment of torsional differences following closed intramedullary nailing of femoral fractures.

OBJECTIVE: A torsional difference of more than 15 degrees is found in up to 30% of patients following closed intramedullary nailing of femoral fractures. The diagnosis is usually established postoperatively by computed tomography. A torsional deformity of more than 15 degrees should be corrected by early derotation. In order to enable an intraoperative control and possible correction to avoid a second operation for the patient, a new ultrasound-based method suitable for the intraoperative setting has been developed, using the anterior condylar line as a distal reference line. DESIGN AND PATIENTS: In a prospective study the torsional difference after closed intramedullary nailing of femoral fractures was measured postoperatively by ultrasound in 32 patients and compared with standard CT readings. RESULTS: Torsional differences measured by ultrasound and CT showed a high correlation (r = 0.8) and a median difference of less than +/-3 degrees. CONCLUSIONS: By the introduction of the anterior condylar line as a distal reference line femoral torsion can accurately be assessed by ultrasound in a position required for intraoperative control and possible correction.

[Distal radius fractures]. / Distale Radiusfrakturen.

Fractures of the distal end of the radius are the most common fractures in humans. The variants of type of fracture and associated injuries are numerous, depending on the mechanism of injury, the amount of energy absorbed and the quality of the bone. Treatment concepts evolve as our understanding of the physiopathology of this heterogeneous group of injuries increases. It is now commonly accepted that extraarticular anatomy and joint congruency, as well as ligamentous integrity, should be restored to obtain a good functional result. This paper provides an overview of current knowledge and discusses possible future trends.