Measurement setup for Nernst and Seebeck effect at high temperatures and magnetic fields tested on elemental bismuth and full-Heusler compounds.

In this work, a measurement setup to study the Seebeck and Nernst effect at high temperatures and high magnetic fields is introduced and discussed. The measurement system allows for simultaneous measurements of both thermoelectric effects up to 700 K and magnetic fields up to 12 T. Based on theoretical concepts, measurement equations are derived that counteract constant spurious offset voltages and, therefore, inhibit systematic errors in the measurement setup. The functionality is demonstrated on polycrystalline samples of elemental bismuth as well as various full-Heusler materials, exhibiting an anomalous Nernst effect. In all samples, the measured Seebeck and Nernst coefficients align excellently with the reported values. This allows future research to substantially extend the measured temperature and field intervals, commonly limited to temperatures below room temperature. For the first time, the thermoelectric and thermomagnetic properties of these materials are reported up to temperatures of 560 K.

Estimation of element deposition derived from road traffic sources by using mosses.

Sixty moss samples were taken along transects of nine roads in Austria. The concentrations of 17 elements in four moss species were determined. There was a high correlation between several elements like Cu/Sb (0.906), Ni/Co (0.897) or Cr/V (0.898), indicating a common traffic-related source. Enrichment factors were calculated, showing highest enrichment levels for: Cr, Mo, Sb, Zn, As, Fe, V, Cu, Ni, and Co. For these elements, road traffic has to be assumed as a source, which is confirmed by a significant negative correlation of the concentrations in mosses to the distance from the road for most of these metals. The rate of decrease followed a log-shaped curve at most of the investigated transects, although the decline cannot be explained by a single model. Multiple regression analysis highlighted traffic density, distance from and elevation of the road as the most influencing factors for the deposition of the investigated elements. Heavy duty vehicles (HDVs) and light duty vehicles (LDVs) showed different patterns. A comparison of sites likely to be influenced by traffic emissions with average values for the respective regions showed no significant differences for road distances of more than 250 m. Nevertheless, at heavily frequented roads, raised deposition of some elements was found even at a distance of 1,000 m.

Variations in heavy metal concentrations in the moss species Abietinella abietina (Hedw.) Fleisch. according to sampling time, within site variability and increase in biomass.

Concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mo, Ni, Pb, V and Zn were analysed in the moss Abietinella abietina (Hedw.) Fleisch. to estimate atmospheric heavy metal depositions. Samples were taken at five comparable sites within a radius of 25 m four times during the year 2000 (July 3rd, August 3rd, September 7th, October 3rd). The samples were taken by means of a PVC-tube (r=10 cm) and could therefore be related to aboveground growth and aerial deposition. The investigation showed significant differences between the various sampling times for concentrations of all heavy metals in total but not between concentrations of a single metal. For Cu, Hg, Mo, Pb and Zn temporal variation (=variation between the four times of sampling) was larger than spatial variation (=variation of concentrations between sub-samples at a single sampling time). Growth rates of the mosses differed significantly between sampling times, which reflects the low precipitation at the beginning of the season. Biomass increase, dust and precipitation influenced the metal concentrations. The calculation of deposition rates, which takes growth rates into account, showed significant differences between the various sampling times for Al, Cd, Cr, Cu and Ni, which is controversial to the results obtained from concentrations of these elements. Additionally, the calculation of atmospheric deposition rates showed a constant increase of metal depositions throughout the investigated period, which can not be seen by considering the concentrations only.