Polyurethane-biomacromolecule combined foam dressing containing asiaticoside: fabrication, characterization and clinical efficacy for traumatic dermal wound treatment.

Polyurethane combined (PUC) foam dressings with various biomacromolecules were fabricated with the adsorption of asiaticoside and silver nanoparticles for traumatic wound treatment. Biomacromolecules had varying effects on physicochemical and mechanical properties of PU foam. With 2% incorporation, starches, high molecular weight chitosan and gelatin provided stiffer and more porous foams while carboxymethylcellulose had the highest compression strength but the lowest water vapor transmission. High water absorption was from foams with carboxymethylcellulose, alginate, hydroxypropyl methylcellulose and low molecular weight chitosan. Increasing the concentrations up to 12% had more prominent effect. However, powdery surface was noticed with poorer tensile properties that 6% incorporation was selected. FTIR spectra and DSC thermograms suggested interaction of PU formulation with biomacromolecules. EDS analysis confirmed existence of active compounds while acceptable stability was from sterilized PUC foam with alginate. On healthy volunteers, this selected foam dressing caused no skin irritation and retained moisture comparable to commercial product. In patients with traumatic dermal wounds, healing improvement with shorter wound closure time, higher reepithelialization and less pain score were from the selected foam dressing compared to standard gauze soaked with chlorhexidine. This PU-alginate combined foam dressing adsorbed with asiaticoside and silver nanoparticles proved advantages for traumatic dermal wound management.

Amphotericin B loaded solid lipid nanoparticles (SLNs) and nanostructured lipid carrier (NLCs): physicochemical and solid-solution state characterizations.

Amphotericin B (AmB) is one of the most effective systemic antifungal agents, but its use is circumscribed by the dose-limiting toxicity of the conventional micellar dispersion formulation, Fungizone®. Significantly lesser toxicity is obtained when AmB incorporated into the aqueous dispersion of lipid nanoparticles. The aim of this study was to develop and characterize AmB loaded solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs). NLC differed from SLN by the presence of liquid lipid, glyceryl tri(caprylate/caprate) in the lipid matrix. Various surfactants i.e. tween 20, cremophor RH40, poloxamer 407 (P407) and Myrj 52 were used to stabilize SLN and NLC. The effect of phospholipid incorporated in those lipid dispersions was also determined. Among surfactants tested, only P407 could stabilize AmB lipid dispersions. There was no chemical reaction occurred between AmB and other components that confirmed by Fourier transform infrared spectroscopy (FT-IR) spectra. The differential scanning calorimetry (DSC), hot-stage microscopy (HSM), powder X-ray diffractometry (PXRD) data showed that AmB was molecularly dispersed or in amorphous form in the lipid matrix. The proton nuclear magnetic resonance (1H-NMR) results showed that in the presence of phospholipid oil clusters within the lipid matrix are formed. These results indicate that SLN and NLC stabilized by P407 and/or phospholipid as the colloidal carrier for AmB were successfully developed.

Development of polyurethane foam dressing containing silver and asiaticoside for healing of dermal wound.

Polyurethane foam dressings for dermal wounds were formulated with natural polyols in order to improve the foam characteristics and the release of 2 active agents, silver and asiaticoside (AS) as an antimicrobial agent and an herbal wound healing agent, respectively. The foam was instantly formed by interaction of polyols and diisocyanate. Hydroxypropyl methylcellulose, chitosan and sodium alginate were individually mixed with the main polyols, polypropylene glycol, in the formulation while the active components were impregnated into the obtained foam dressing sheets. Although the type and amount of the natural polyols slightly affected the pore size, water sorption-desorption profile and compression strength of the obtained foam sheets, a prominent effect was found in the release of both active components. Among natural polyols formulations, foam sheets with alginate showed the highest silver and AS release. Non-cytotoxicity of these foam sheets to human fibroblast cells was confirmed. Antimicrobial testing on four bacteria strains showed that 1 mg/cm2 silver in formulations with 6% of natural polyols and without natural polyols had sufficient content of the silver release with comparable inhibition zone and significantly larger zone than other formulations. In pig study, the foam dressing with 6% alginate, 1 mg/cm2 silver and 5% AS could improve wound healing in both the percentage of the wound closure and histological parameters of the dermal wound without any dermatologic reactions. In conclusion, this innovative foam dressing had potential to be a good candidate for wound treatment.

Amphotericin B-loaded solid lipid nanoparticles (SLNs) and nanostructured lipid carrier (NLCs): effect of drug loading and biopharmaceutical characterizations.

The aim of this study was to further investigate the effect of drug loading, drug entrapment efficiency, the drug release profiles and biopharmaceutical point of views of amphotericin B (AmB) lipid formulations, that is, degree of aggregation by UV-spectroscopy, in vitro hemolytic and antifungal activities. The optimum drug loading was 2.5% by weight corresponded to lipid fraction in formulation. Increasing of the drug entrapment was achieved by blending small amount of phospholipid in solid lipid nanoparticle (SLN) dispersions. All AmB lipid dispersions were less aggregated species and hemolytic response than Fungizone® indicating that lipid nanoparticles could reduce its toxicity. The sustained release profiles of AmB formulations depended on its aggregated form and entrapment efficiency. Too high AmB loaded (5% w/w) showed a biphasic drug release profile probably due to some amounts of drug deposited on the nanosphere surface including in continuous phase which promptly released. For in vitro antifungal testing, all AmB lipid formulations were equal and more effective than both AmB itself and Fungizone®. These observations suggested that AmB loaded SLNs, nanostructured lipid carriers and modified SLNs by blending lecithin could enhance AmB solubility, prolong release characteristics, reduce toxicity and improve antifungal activity.

Gamma sterilization of diclofenac sodium loaded- N-trimethyl chitosan nanoparticles for ophthalmic use.

This study was conducted to investigate the effect of gamma irradiation on physicochemical properties of N-trimethyl chitosan (TMC), diclofenac sodium (DC) and diclofenac sodium loaded N-trimethylchitosan nanoparticles (DC-TMCNs), and to determine suitable doses of gamma rays for sterilization of DC-TMCNs. Physicochemical properties of TMC, DC and DC-TMCNs before and after exposure to gamma rays at various doses were investigated. It was found that gamma irradiation at doses of 5-25kGy did not cause any significant changes in physical and chemical properties of TMC, DC and DC-TMCNs. The bioburden of DC-TMCNs was 1.5×106 CFU/vial. The initial contaminating bacteria were radiosensitive bacteria. A number of microorganisms was reduced to 10-6 after exposure to 9.9kGy of gamma rays. Therefore, DC-TMCNs could be sterilized by gamma irradiation at a dose of 10kGy, which did not alter their physicochemical properties and did not produce any substances toxic to the eye.

Glucose-Lowering Efficacy of Water Extract of Malvastrum coromandelianum in Type 2 Diabetes Subjects: A Double Blind, Randomized Controlled Trial.

BACKGROUND: Water extract from Malvastrum coromandelianum (Linn.) Garcke (MC) has been shown to have glucose lowering effect, short- and long-term safety in animal studies. A preliminary study in human reveals safety and its potential use as an adjunctive treatment to antihyperglycemic medications. OBJECTIVE: To investigate the glycemic-lowering efficacy ofMC in type 2 diabetes subjects. MATERIAL AND METHOD: A multicenter randomized, double-blind, placebo-controlled trial was conducted. Seventy-one diabetes subjects, who were treated with either diet control or single oral anti-diabetic drug (sulphonylurea or biguanide) with HbA1C between 6.5-9%, were recruited. Subjects were randomized to take MC tablets in a total dose of 1,200 mg/day or placebo for 12 weeks. Clinical parameters, glycemic control, HOMA-IR and HOMA-ß were assessed. RESULTS: Both MC (n = 34) and placebo (n = 37) groups had comparable baseline characteristics with a mean baseline HbA1C of 7.6 ± 0.82 vs. 7.5 ± 0.8%, respectively. During the study, HbA1C did not differ statistically after 4, 8 and 12 weeks of treatment (7.7 ± 0.97 vs. 7.6 ± 1.0, 7.9 ± 1.09 vs. 7.8 ± 1.03 and 7.8 ± 1.1 vs. 7.6 ± 1.1%, respectively). The body weight, insulin resistance and insulin secretion were also similar between groups (p > 0.05). No episode of hypoglycemia was reported. CONCLUSION: MC in a dosage of 1,200 mg/day does not have glucose lowering efficacy in type 2 diabetes.

Bromocriptine tablet of self-microemulsifying system adsorbed onto porous carrier to stimulate lipoproteins secretion for brain cellular uptake.

Both low solubility and high hepatic metabolism cause low oral bioavailability of bromocriptine mesylate (BM) leading to very low drug amount in brain. Self-microemulsion (SME) tablets were developed to improve solubility, stimulate lipoprotein synthesis to promote lymphatic transport, avoid hepatic metabolism and target drug to brain. SME liquid containing castor oil, Tween(®) 80 and Cremophor(®) EL was prepared and then adsorbed onto solid carries, Aerosil(®)200, Aeroperl(®)300 or NeusilinUS2(®), yielding SME powders. The optimal ratios of SME liquid to carriers determined from flowability and scanning electron photomicrographs before tableting were 1.5:1, 2:1 and 2.5:1 for Aerosil(®)200, Aeroperl(®)300 and NeusilinUS2(®), respectively. Only Aeroperl(®)300 SME tablet had comparable dissolution to BM commercial tablet. From in vitro study in Caco-2 cells, fluorescein loaded SME tablet showed higher uptake than fluorescein loaded in either oil or surfactant. Although significantly lower amount of drug was permeated from SME tablet than from commercial tablet, higher drug uptake was obviously observed (P<0.05). In addition, higher lipoprotein synthesis expressing as content of apolipoprotein B (apo-B) found in secreted chylomicron resulted in higher drug uptake in co-culture of brain endothelial cells (bEnd.3) and astrocytes (CTX TNA2) from drug loaded SME tablet when compared to commercial tablet (P<0.05) due to binding of apo-B to LDL receptors expressed on the surface of endothelial cells. Therefore, tablet of SME adsorbed onto porous carrier potentially delivered BM to brain via lymphatic transport by increasing the lipoprotein synthesis.

Development and Evaluation of Diclofenac Sodium Loaded-N-Trimethyl Chitosan Nanoparticles for Ophthalmic Use.

The ophthalmic preparation of diclofenac sodium (DC) for relieving ocular inflammation is presently available in the market only as an eye drop solution. Due to its low occular bioavailability, it requires frequent application leading to low patients' compliance and quality of life. This study was conducted to develop formulations of DC loaded-N-trimethyl chitosan nanoparticles (DC-TMCNs) for ophthalmic use to improve ocular biavailabiltiy of DC. DC-TMCNs varied in formulation compositions were prepared using ionic gelation technique and evaluated for their physicochemical properties, drug release, eye irritation potential, and ophthalmic absorption of diclofenac sodium. N-Trimethyl chitosan (TMC) with a 49.8% degree of quaternization was synthesized and used for DC-TMCNs production. The obtained DC-TMCNs had particle size in a range of 130-190 nm with zeta potential values of +4 to +9 mV and drug entrapment efficiencies of more than 70% depending on the content of TMC and sodium tripolyphosphate (TPP). The optimized DC-TMCNs formulation contained TMC, DC, and TPP at a weight ratio of TMC/DC/TPP = 3:1:1. Their lyophilized product reconstituted with phosphate buffer solution pH 5.5 possessed a drug release pattern that fitted within the zero-order model. The eye irritation tests showed that DC-TMCNs were safe for ophthalmic use. The in vivo ophthalmic drug absorption study performed on rabbits indicated that DC-TMCNs could improve ophthalmic bioavailability of DC. Results of this study suggested that DC-TMCNs had potential for use as an alternative to conventional DC eye drops for ophthalmic inflammation treatment.

Transdermal nicotine mixed natural rubber-hydroxypropylmethylcellulose film forming systems for smoking cessation: in vitro evaluations.

Novel film forming polymeric dispersions for transdermal nicotine delivery were prepared from deproteinized natural rubber latex (DNRL) blended with hydroxypropylmethylcellulose (HPMC) and dibutyl phthalate (DBP) or glycerin (GLY) as plasticizer. The preliminary molecular compatibility of ingredients was observed by Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray diffractometry characterizations. All film forming polymeric dispersions were elegant in appearance and smooth in texture without agglomeration. Their pH was 7-8. In addition, their viscosity and spreadability showed good characteristics depended on HPMC and plasticizers blended. The transparent in situ dry films with good strength and elasticity were also confirmed by peeling-off. The nicotine release from them revealed an initial fast release that was similar to the release from a concentrated nicotine solution, and followed by slow release pattern from the in situ films. GLY blended formulation produced a higher amount of nicotine permeation through the in vitro pig skin than DBP blends. Ethanol mixing also enhanced nicotine permeation, but it affected the integrity of in situ films. The nicotine release and skin permeation kinetics were by a diffusion mechanism that was confirmed by the Higuchi's model. These formulations were safe without producing any severe skin irritation. However, for the stability they needed to be stored at 4 °C in tightly sealed containers.

Spray-dried chitosan microparticles for cellular delivery of an antigenic protein: physico-chemical properties and cellular uptake by dendritic cells and macrophages.

PURPOSE: Spray-dried chitosan microparticles for cellular delivery of antigen to dendritic cells (DC) and macrophages (Mϕ) were investigated. METHODS: Chitosan microparticles were prepared by spray drying. For comparison, poly(lactic-co-glycolic acid) (PLGA) and poly(α-butyl cyanoacrylate) (BCA) micro-/nanoparticles were generated. Bovine serum albumin (BSA) was used as a model antigen. The particles were characterized in terms of size, morphology, surface charge, surface composition, protein content, entrapment efficiency, in vitro release, and protein integrity. Additionally, they were subject to cell viability and cellular uptake study with DC and Mϕ. RESULTS: Size of chitosan, PLGA, and BCA micro-/nanoparticles ranged between 3.11-7.18, 0.94-6.26, and 0.30-6.34 µm, respectively. Particle morphology and in vitro protein release varied, depending on polymer type, particle composition and preparation process parameters. Chitosan microparticles were cationic, while PLGA microparticles were neutral. BCA micro-/nanoparticles were either anionic or cationic, according to polymerization pH. Protein content and entrapment efficiency of chitosan and PLGA microparticles were relatively consistent. Only integrity and conformational structure of protein encapsulated in chitosan microparticles were completely retained. Chitosan and PLGA microparticles were non-toxic to DC and Mϕ, but the former were internalized more efficiently. CONCLUSIONS: Spray-dried chitosan microparticles delivered the antigen efficiently to DC and Mϕ.

Deproteinized natural rubber film forming polymeric solutions for nicotine transdermal delivery.

Film forming polymeric solutions were prepared from DNRL blended with MC, PVA, or SAG, together with dibutylphthalate or glycerine used as plasticizers. These formulations were easily prepared by simple mixing. In a preliminary step, in situ films were prepared by solvent evaporation in a Petri-dish. Their mechanical and physicochemical properties were determined. The in vitro release and skin permeation of nicotine dissolved in these blended polymers were investigated by a modified Franz diffusion cell. The formulations had a white milky appearance, and were homogeneous and smooth in texture. Their pH was suitable for usage in skin contact. The mechanical property of in situ films depended on the ingredients but all compatible films were in an amorphous phase. The DNRL/PVA was shown to be the most suitable mixture to form completed films. The in vitro release and skin permeation studies demonstrated a biphasic release that provided an initial rapid release followed by a constant release rate that fitted the Higuchi's model. Nicotine loaded DNRL/PVA series were selected for the stability test for 3 months. These formulations needed to be kept at 4°C in tight fitting containers. In conclusion, film forming polymeric solutions could be developed for transdermal nicotine delivery systems.

yCD/HPyCD mixtures as solubilizer: solid-state characterization and sample dexamethasone eye drop suspension.

PURPOSE: Study the complexation of dexamethasone in combinations of γ-cyclodextrin (γCD) and 2-hydroxypropyl-γ-cyclodextrin (HPγCD) with emphasis on solid characterization and development of aqueous dexamethasone eye drop suspension for drug delivery through sclera. METHODS: Dexamethasone/cyclodextrin (dexamethasone/CD) solid complex systems were prepared and characterized by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and by in vitro drug dissolution testing. Sample eye drop suspensions were prepared applying solubilizer/suspender consisting of γCD/HPγCD mixtures, poloxamer 407 (P407) and polyvinylpyrrolidone. The eye drop suspension was characterized by its physicochemical properties. RESULTS: The solid characterization techniques applied suggested that solid complexes were being formed. The results indicated that dexamethasone formed non-inclusion or micelle-like aggregates with HPγCD and the γCD/HPγCD mixture. The dissolution and dexamethasone release from the solid dexamethasone/γCD/HPγCD complexes was much faster than from the solid dexamethasone/γCD and dexamethasone/HPγCD complexes. The diameter of the solid particles in the dexamethasone eye drop suspension formulations were in all cases less than 10 µm with a mean diameter from 2.5 to 5.8 µm. The particle size decreased with increasing amount of P407. Permeation studies through semipermeable membrane and porcine sclera showed that increasing the amount HPγCD could enhance drug transport through the membrane barriers and this was related to enhanced drug solubility. The permeation rates were, however, decreased compared to formulation containing γCD alone due to larger hydrodynamic diameter of dexamethasone/γCD/HPγCD complex aggregates. All formulations were both chemically stable for at least 8 months at 25°C and 40°C. CONCLUSIONS: Combination of γCD and HPγCD, i.e., formation of dexamethasone/γCD/HPγCD complexes, resulted in synergistic effect. That is the mixture had greater solubilizing effect than the individual CD, resulted in enhanced dissolution and drug delivery through membranes. Furthermore, it is possible to control the drug release rate by adjusting the γCD:HPγCD ratio in the solid dexamethasone/γCD/HPγCD complexes.

Retained integrity of protein encapsulated in spray-dried chitosan microparticles.

Chitosan microparticles for delivery of proteins were prepared by spray-drying technique. The effects of formulation (molecular weight and concentration of chitosan) and process variables (inlet drying air temperature and spray rate) on size and morphology of microparticles were characterized. Size of microparticles was mainly controlled by formulation variables, while particle morphology was influenced by both formulation and process variables investigated in this study. Bovine serum albumin (BSA), as a model protein, was loaded into microparticles at different levels. BSA-loaded chitosan microparticles were characterized in terms of physicochemical properties and integrity of encapsulated protein, which was studied by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and circular dichroism. Size of microparticles ranged between 3.760-8.681 microm, of which BSA-loaded microparticles were larger in size than their corresponding blank microparticles. All microparticles showed dented or distorted surface, especially when BSA was incorporated, with positive surface charge exposed. Burst release of protein was observed. The effect was more pronounced as BSA loading level was increased. Integrity of entrapped protein could be retained when BSA was incorporated at high loading level. In conclusion, chitosan microparticles for delivery of protein could be efficiently prepared by spray-drying technique. The encapsulated protein was capable of retaining its integrity after the preparation process.

Formulation variables influencing drug release from layered matrix system comprising chitosan and xanthan gum.

The purpose of this study was to investigate the formulation variables influencing the drug release from the layered tablets containing chitosan and xanthan gum as matrix component. Increasing the amount of lactose could diminish pH sensitive release behavior of these matrix tablets. Effect of formulation variables on drug release from the prepared three-layered matrix tablets was investigated. The amount of drug loading did not affect the drug release which was influenced by the hydrodynamic force and the matrix composition. An increase in stirring rate correspondingly increased the release rate. Moreover, incorporation of soluble diluents in core or barrier could enhance the drug release. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was carried out to study the drug release mechanism. Most dissolution profiles of the prepared three-layered tablets provided a better fit to zero order kinetic than to first order kinetic and Higuchi's equation.

Sustained-release from layered matrix system comprising chitosan and xanthan gum.

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH3+ of chitosan molecule and COO- of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.

Effect of solid lipid nanoparticles formulation compositions on their size, zeta potential and potential for in vitro pHIS-HIV-hugag transfection.

PURPOSE: This work was conducted to determine model equations describing the effect of solid lipid nanoparticles (SLN) formulation compositions on their size and zeta potential using the face-centered central composite design and to determine the effect of SLN formulation compositions on the potential for in vitro pHIS-HIV-hugag transfection. MATERIALS AND METHODS: SLN were prepared by the hot high pressure homogenization technique using cetylpalmitate as lipid matrix at varying concentrations of Tween 80 and Span 85 mixture, dimethyldioctadecyl ammonium bromide (DDAB) and cholesterol. Size and zeta potential used as responses of the design were measured at pH 7.0. The model equations were accepted as statistical significance at p value of less than 0.05. Ability of SLN to form complex with pHIS-HIV-hugag was evaluated by electrophoretic mobility shift assay. In vitro cytotoxicity of SLN was studied in HeLa cells using alamar blue bioassay. The potential of SLN for in vitro pHIS-HIV-hugag transfection was also determined in HeLa cells by western blot technique. RESULTS: SLN possessed diameter in a range of 136-191 nm and zeta potential 11-61 mV depending on the concentrations of surfactant mixture, DDAB and cholesterol. The regression analysis showed that the model equations of responses fitted well with quadratic equations. The ability of SLN to form complex with pHIS-HIV-hugag was also affected by formulation compositions. In vitro cytotoxicity results demonstrated that HeLa cells were not well tolerant of high concentrations of SLN but still survived in a range of 100-200 microg/ml of SLN in culture medium. The results of transfection study showed ability of SLN to use as a vector for in vitro pHIS-HIV-hugag transfection. However, their potential for in vitro transfection was lower than the established transfection reagent. CONCLUSIONS: Size and zeta potential of SLN could be predicted from their quadratic model equations achieved by combination of three variables surfactant, DDAB and cholesterol concentrations. In addition, these variables also affected the potential of SLN as a vector for in vitro pHIS-HIV-hugag transfection. The results here provide the framework for further study involving the SLN formulation design for DNA delivery.

Spray-dried mucoadhesive microspheres: preparation and transport through nasal cell monolayer.

The purpose of this research was to prepare spray-dried mucoadhesive microspheres for nasal delivery. Microspheres composed of hydroxypropyl methylcellulose (H), chitosan (CS), carbopol 934P (CP) and various combinations of these mucoadhesive polymers, and maltodextrin (M), colloidal silicon dioxide (A), and propylene glycol (P) as filler and shaper, were prepared by spray-drying technique. Using propranolol HCl as a model drug, microspheres were prepared at loadings exceeding 80% and yields between 24% and 74%. Bulky, free flowing microspheres that had median particle size between 15 and 23 mum were obtained. Their zeta potential was according to the charge of polymer. Adhesion time of mucoadhesive microspheres on isolated pig intestine was ranked, CS > CP:H > CP > H, while the rank order of swelling was CP > CS > H. Increasing the amount of CP in CP:H formulations increased the percentage of swelling. Infrared (IR) spectra showed no interaction between excipients used except CS with acetic acid. The release of drug from CP and CP:H microspheres was slower than the release from H and CS microspheres, correlated to their viscosity and swelling. Long lag time from the CP microspheres could be shortened when combined with H. The permeation of drug through nasal cell monolayer corresponded to their release profiles. These microspheres affected the integrity of tight junctions, relative to their swelling and charge of polymer. Cell viability was not affected except from CS microspheres, but recovery could be obtained. In conclusion, spray-dried microspheres of H, CS, CP, and CP:H could be prepared to deliver drug through nasal cell monolayer via the opening of tight junction without cell damaging.

Spray-dried mucoadhesive microspheres: Preparation and transport through nasal cell monolayer.

The purpose of this research was to prepare spray-dried mucoadhesive microspheres for nasal delivery. Microspheres composed of hydroxypropyl methylcellulose (H), chitosan (CS), carbopol 934P (CP) and various combinations of these mucoadhesive polymers, and maltodextrin (M), colloidal silicon dioxide (A), and propylene glycol (P) as filler and shaper, were prepared by spray-drying technique. Using propranolol HCl as a model drug, microspheres were prepared at loadings exceedings 80% and yields between 24% and 74%. Bulky, free flowing microspheres that had median particle size between 15 and 23 µm were obtained. Their zeta potential was according to the charge of polymer. Adhesion time of mucoadhesive microspheres on isolated pig intestine was ranked, CS>CP: H>CP>H, while the rank order of swelling was CP>CS>H. Increasing the amount of CP in CP∶H formulations increased the percentage of swelling. Infrared (IR) spectra showed no interaction between excipients used except CS with acetic acid. The release of drug from CP and CP∶H microspheres was slower than the release from H and CS microspheres, correlated to their viscosity and swelling. Long lag time from the CP microspheres could be shortened when combined with H. The permeation of drug through nasal cell monolayer corresponded to their release profiles. These microspheres affected the integrity of tight junctions, relative to their swelling and charge of polymer. Cell viability was not affected except from CS microspheres, but recovery could be obtained. In conclusion, spray-dried microspheres of H, CS, CP, and CP∶H could be prepared to deliver drug through nasal cell monolayer via the opening of tight junction without cell damaging.

Effect of anionic water-soluble dyes on film coating properties of chitosan acetate.

Solution of chitosan in dilute acetic acid was prepared to have an apparent viscosity of 125 mPa s and mixed with solution of anionic water-soluble dye. The effects of concentration and type of dye and molecular weight and percentage deacetylation of chitosan on their miscibility and physical stability were investigated. High concentration of dye and high molecular weight and percentage deacetylation of chitosan resulted in precipitation or colloidal dispersion due to ionic interaction between dye and the polymer. The effect was more prominent upon storage. The miscibility of dye and the polymer depended on the molecular configuration and ionic group in the dye molecule. It was ranked brilliant blue approximately euqal to green FS > fast green > ponceau SX approximately euqal to green sunset yellow > erythrosine approximately euqal to green tartrazin > indigo carmine. Solutions of low molecular weight chitosan with and without green FS were then used as coating formulations onto propranolol hydrochloride core tablets. There was no color migration on coated tablets even after storage for 1 year. Disintegration and drug dissolution from tablets coated with colored film were slightly slower than those from tablets coated with plain film and core tablet, respectively. This was corresponding to the results of swelling and dissolution of cast films. However, all tablets conformed to the specification in monograph of USP XXIV.

Moist heat treatment on physicochemical change of chitosan salt films.

Chitosan salt films were prepared by casting method using acetic, citric, formic, glycolic, lactic, malic and propionic acids as solubilizers. The films were then exposed to moist heat at 60 degrees C and 75% relative humidity for several time intervals. The influence of moist heat treatment on their physicochemical characteristics was investigated. All freshly prepared films were soluble in deionized water and HCl buffer solution. Chitosan citrate film also dissolved in phosphate buffer solution. After treatment, the percentage of water sorption and dissolution of chitosan films in three media were gradually decreased. Longer alkyl group and less carboxyl and hydroxyl groups in the molecule of organic acid resulted in lower percentage of water sorption and dissolution of treated films. The FT-IR spectra revealed that there was amide formation between chitosan and organic acids after treatment especially in chitosan acetate and propionate films. However, the absorption peaks of ammonium ['NH3+] and free carboxylate groups were still remained in treated chitosan citrate and malate films. Change in the degree of crystallinity from powder X-ray diffractogram and thermal characteristic from DSC thermogram were also related to the water sorption and dissolution of films.