Thiol-ene conjugation of VEGF peptide to electrospun scaffolds as potential application for angiogenesis.

Vascular endothelial growth factor (VEGF) plays a vital role in promoting attachment and proliferation of endothelial cells, and induces angiogenesis. In recent years, much research has been conducted on functionalization of tissue engineering scaffolds with VEGF or VEGF-mimetic peptide to promote angiogenesis. However, most chemical reactions are nonspecific and require organic solvents, which can compromise control over functionalization and alter peptide/protein activity. An attractive alternative is the fabrication of functionalizable electrospun fibers, which can overcome these hurdles. In this study, we used thiol-ene chemistry for the conjugation of a VEGF-mimetic peptide to the surface of poly (ε-caprolactone) (PCL) fibrous scaffolds with varying amounts of a functional PCL-diacrylate (PCL-DA) polymer. 30% PCL-DA was selected due to homogeneous fiber morphology. A VEGF-mimetic peptide was then immobilized on PCL-DA fibrous scaffolds by a light-initiated thiol-ene reaction. 7-Mercapto-4-methylcoumarin, RGD-FITC peptide and VEGF-TAMRA mimetic peptide were used to validate the thiol-ene reaction with fibrous scaffolds. Tensile strength and elastic modulus of 30% PCL-DA fibrous scaffolds were significantly increased after the reaction. Conjugation of 30% PCL-DA fibrous scaffolds with VEGF peptide increased the surface water wettability of the scaffolds. Patterned structures could be obtained after using a photomask on the fibrous film. Moreover, in vitro studies indicated that scaffolds functionalized with the VEGF-mimetic peptide were able to induce phosphorylation of VEGF receptor and enhanced HUVECs survival, proliferation and adhesion. A chick chorioallantoic membrane (CAM) assay further indicated that the VEGF peptide functionalized scaffolds are able to promote angiogenesis in vivo. These results show that scaffold functionalization can be controlled via a simple polymer mixing approach, and that the functionalized VEGF peptide-scaffolds have potential for vascular tissue regeneration.

Electrospun Scaffolds Functionalized with a Hydrogen Sulfide Donor Stimulate Angiogenesis.

Tissue-engineered constructs are currently limited by the lack of vascularization necessary for the survival and integration of implanted tissues. Hydrogen sulfide (H2S), an endogenous signaling gas (gasotransmitter), has been recently reported as a promising alternative to growth factors to mediate and promote angiogenesis in low concentrations. Yet, sustained delivery of H2S remains a challenge. Herein, we have developed angiogenic scaffolds by covalent attachment of an H2S donor to a polycaprolactone (PCL) electrospun scaffold. These scaffolds were engineered to include azide functional groups (on 1, 5, or 10% of the PCL end groups) and were modified using a straightforward click reaction with an alkyne-functionalized N-thiocarboxyanhydride (alkynyl-NTA). This created H2S-releasing scaffolds that rely on NTA ring-opening in water followed by conversion of released carbonyl sulfide into H2S. These functionalized scaffolds showed dose-dependent release of H2S based on the amount of NTA functionality within the scaffold. The NTA-functionalized fibrous scaffolds supported human umbilical vein endothelial cell (HUVEC) proliferation, formed more confluent endothelial monolayers, and facilitated the formation of tight cell-cell junctions to a greater extent than unfunctionalized scaffolds. Covalent conjugation of H2S donors to scaffolds not only promotes HUVEC proliferation in vitro, but also increases neovascularization in ovo, as observed in the chick chorioallantoic membrane assay. NTA-functionalized scaffolds provide localized control over vascularization through the sustained delivery of a powerful endogenous angiogenic agent, which should be further explored to promote angiogenesis in tissue engineering.

Bull sperm selection by attachment to hyaluronic acid semi-interpenetrated hydrogels.

We report the development of a hydrogel-based approach to select bull spermatozoa, a crucial step for successful assisted reproductive techniques (ARTs). Hyaluronic acid (HA) semi-interpenetrated N-isopropylacrylamide (PNIPAM) co-20% N-Tris (hydroxymethyl) methyl acrylamide (HMA) hydrogels were synthetized on glass surfaces and cultured in presence of frozen-thawed bull spermatozoa. A fraction of motile bull spermatozoa population strongly attached to hydrogels and was partially released by treatment with hyaluronidase. Fifty-nine (59 ± 7.24) per cent of sperm cells attached to PNIPAM-HMA-HA hydrogels and 31.16 ± 4.81% of them were released upon treatment with medium containing hyaluronidase. This attached-released sperm fraction has acceptable characteristics of progressive motility (50.0 ± 5.0%), vigour (4), high viability (58.7 ± 11.7%) and low percentage of acrosome reacted spermatozoa (23.36 ± 4.1%). Our findings indicate that PNIPAM-HMA-HA hydrogels are non-toxic and allow the selection of high-quality sperm cells for ART.

Mechanical and physicochemical behavior of a 3D hydrogel scaffold during cell growth and proliferation.

Some of the essential properties for cellular scaffolding are the capability to maintain the three-dimensional (3D) structure, good adhesion, and adequate elastic modulus during cell growth, migration, and proliferation. Biocompatible synthetic hydrogels are commonly used as cellular scaffolds because they can mimic the natural extracellular matrices (ECMs). However, it is possible that the physicochemical and mechanical behavior of the scaffold changes during cell proliferation and loses the scaffold properties but this is rarely monitored. In this work, the physicochemical and mechanical properties of a macroporous soft material based on poly(N-isopropyl acrylamide) (PNIPAM) have been studied during a period of 75 days at culture condition while bovine fetal fibroblasts (BFF) were grown within the matrix. The interconnected macroporous hydrogel was obtained by cryogelation at -18 °C. The swelling capacity of the scaffold was not altered during cell proliferation but changes in the mechanical properties were observed, beginning with the high elastic modulus (280 kPa) that progressively decreased until mechanical stability (40 kPa) was achieved after 20 culture days. It was observed that the matrix-cell interactions together with collagen production favor normal cellular processes such as cell morphology, adhesion, migration, and proliferation. Therefore, the observed behavior of macroporous PNIPAM as a 3D scaffold during cell growth indicates that the soft matrix is cytocompatible for a long time and preserves the suitable properties that can be applied in tissue engineering and regenerative medicine.

Cytotoxicity and bioadhesive properties of poly-N-isopropylacrylamide hydrogel.

Several hydrogel surfaces present properties that simulate the mechanical and physicochemical features of extracellular matrix (ECM), providing a platform that mimic the native cellular milieus. Poly-N-isopropylacrylamide (PNIPAM) hydrogels are receiving attention in biomedical field due to their thermosensibility and soft texture. However, more extensive biocompatibility and cellular interactions studies with cell lines are needed. Therefore, the aim of this study is focus on evaluating the biocompatibility of PNIPAM through cytotoxicity, genotoxicity, and proliferation tests in murine preadipose cells (3T3-L1), human embryonic kidney cells (HEK293) and human carcinoma-derived cells (A549) in presence of hydrogel surfaces. Bioadhesive capacity above PNIPAM surfaces was also analyzed. MTT and neutral red uptake assays shown non-cytotoxic effect of PNIPAM in the studied cell lines. Genotoxicity was evaluated by the single-cell gel electrophoresis assay, where DNA damages were not detected. [3H]-thymidine staining allowed to corroborate that cell proliferation had progressed correctly. Adopted morphologies for each cell line over PNIPAM were similar to cell growing observed on polystyrene, indicating that the surfaces favor the cell attachment during 5 days' culture. The good biocompatibility of PNIPAM surfaces make it an interesting scaffold with clinical potential in tissue regeneration engineering, and a possible adipose and kidney tissue-engineered construct.

Physicochemical properties of ionic and non-ionic biocompatible hydrogels in water and cell culture conditions: Relation with type of morphologies of bovine fetal fibroblasts in contact with the surfaces.

Cationic, anionic and non-ionic hydrogels having acrylamide polymer backbones were synthesized via free radical polymerization with N,N-methylenebisacrylamide (BIS) as crosslinker. The chemical structures of the hydrogels were characterized by Fourier Transform Infrared Spectroscopy (FTIR). Physicochemical properties such as swelling kinetic, maximum swelling capacity, volume phase transition temperature (VPTT) and wettability (static water contact angle) of hydrogels swollen in aqueous and cell culture medium, at room and cell culture temperatures were studied. In order to correlate the surface properties of the hydrogels and cellular adhesivity of bovine fetal fibroblasts (BFFs), cellular behaviour was analyzed by inverted fluorescence optical microscopy and atomic force microscopy (AFM). MTT assay demonstrated that the number of viable cells in contact with hydrogels does not significantly change in comparison to a control surface. Flattened and spindle-shaped cells and cell spheroids were the adopted morphologies during first days of culture on different hydrogels. Cell spheroids were easily obtained during the first 5days of culture in contact with PNIPAM-co-20%HMA (poly (N-isopropylacrylamide-co-20%N-acryloyl-tris-(hydroxymethyl)aminomethane)) hydrogel surface. After 15days of culture all hydrogels showed high adhesion and visual proliferation. According to obtained results, non-ionic and hydrophilic surfaces with moderated wettability induce the formation of BFFs cell spheroids. These hydrogel surfaces could be used in clinical and biochemical treatments at laboratory level to cell growth and will allow generating the base for future biotechnologic platform.

Allocation trade-offs dominate the response of tropical forest growth to seasonal and interannual drought.

What determines the seasonal and interannual variation of growth rates in trees in a tropical forest? We explore this question with a novel four-year high-temporal-resolution data set of carbon allocation from two forest plots in the Bolivian Amazon. The forests show strong seasonal variation in tree wood growth rates, which are largely explained by shifts in carbon allocation, and not by shifts in total productivity. At the deeper soil plot, there was a clear seasonal trade-off between wood and canopy NPP, while the shallower soils plot showed a contrasting seasonal trade-off between wood and fine roots. Although a strong 2010 drought reduced photosynthesis, NPP remained constant and increased in the six-month period following the drought, which indicates usage of significant nonstructural carbohydrate stores. Following the drought, carbon allocation increased initially towards the canopy, and then in the following year, allocation increased towards fine-root production. Had we only measured woody growth at these sites and inferred total NPP, we would have misinterpreted both the seasonal and interannual responses. In many tropical forest ecosystems, we propose that changing tree growth rates are more likely to reflect shifts in allocation rather than changes in overall productivity. Only a whole NPP allocation perspective can correctly interpret the relationship between changes in growth and changes in productivity.