Alkali-activated geopolymers based on calcined phosphate sludges and metakaolin.

The extraction of phosphorite ore in Tunisia has resulted in the discharge of substantial amounts of phosphatic sludge into the region's water system. To mitigate this environmental issue and prevent heavy metal leaching, a geopolymerization process was employed using two types of Tunisian calcined phosphate sludges (Cal-PS1 and Cal-PS2) as substitutes for alkali-activated metakaolin. This study aimed to investigate and compare the physical and mechanical properties of the resulting geopolymers. The optimal substitution ratio of metakaolin with calcined phosphate sludge was determined to be 1.5, equivalent to 20 wt.% of calcined phosphate sludge. Compressive strength tests conducted after 28 days of curing revealed values of 37 MPa for Cal-PS1 specimens and 28 MPa for Cal-PS2 geopolymers while compressive strength of geopolymers soaked in water for 28 days showed a decrease with the addition of phosphate sludges. The specific surface areas of Cal-PS1 geopolymers ranged from 16.3 to 16.9 m2/g and from 17.62 to 18.73 m2/g for Cal-PS2 specimens exhibiting a mesoporous structure. The elasticity modulus of the geopolymers was found to increase with the increase of the apparent density of geopolymers and with the sludges content but it tended to be lower than the Portland cement elasticity modulus. Leaching test was conducted to evaluate the potential environmental applications of the geopolymers. This test demonstrated effective containment of heavy metals within the geopolymers' network, except for low levels of arsenic.

Jovens cientistas: enfrentamento às arboviroses e participação juvenil no território / Young scientists: facing arboviruses and youth participation in the territory / Jóvenes investigadores: enfrentamiento a las arbovirosis y participación juvenil en el território

O estudo analisa uma formação em Iniciação Científica sobre arboviroses, a partir da percepção de jovens estudantes, em Ceilândia ­ Distrito Federal. Objetivo: compreender em que medida a Iniciação Científica mobiliza esses jovens a participarem de ações de vigilância e promoção da saúde no território, e entender sua motivação para participar do projeto. Metodologia: abrangeu-se a análise das redações escritas para a seleção ao Curso de Formação para Iniciação Científica na Educação Básica e as Arboviroses; a administração desse curso e; posteriormente, um grupo focal com estudantes para análise do processo educativo da Iniciação Científica que vivenciaram. Resultados: a análise de conteúdo evidenciou a percepção dos alunos sobre a Iniciação Científica, centrada em seis categorias analíticas: motivação dos alunos para Iniciação Científica; processo de formação do saber; formação de jovens cientistas; saúde e meio ambiente; participação e empoderamento juvenil e percepções acerca do Sistema Público de Saúde. Conclusão: o enfrentamento às arboviroses exige políticas e intervenções de amplo espectro, e a Iniciação Científica fortaleceu esses jovens estudantes enquanto sujeitos de direitos, ampliou sua percepção sobre ciência, saúde, relação com o ambiente, com o Sistema Único de Saúde e estimulou o interesse em ações preventivas no combate às arboviroses nesses territórios.

This study analyzes a Scientific Initiation (SI) program on arboviroses, from the perception of young high school students in Ceilândia ­ Distrito Federal. Objective: It aims to understand to what extent the SI mobilizes these young people to participate in surveillance and health promotion actions in the territory and understand their motivation to participate in this project. Methodology: The methodology included the analysis of the essays written for the selection to the Training Course for Scientific Initiation in Basic Education and the Arboviroses, the administration of this course, and later a focus group with students to analyze the SI educational process they experienced. Results: The result of the Content Analysis showed that the students' perception about the SI could be grouped into six categories: students' motivation for the scientific initiation; the learning process; the training of young scientists; health and environment; youth participation and empowerment, and perceptions of the Public health system in Brazil (SUS). Conclusion: Confronting arboviroses requires broad-spectrum policies and interventions, and the SI strengthened these young students as subjects of rights, broadened their perception of science, health, relationship with the environment, with the Sistema Único de Saúde and stimulated interest in preventive actions to combat arboviroses in these territories. Keywords: Health education; Arbovirus infections; Adolescents; Public health.

Analiza una formación en Iniciación Científica (IC) sobre arbovirus, desde la percepción de jóvenes estudiantes de secundaria en Ceilândia, Distrito Federal. Objetivo: el objetivo es comprender en qué medida la IC moviliza a estos jóvenes a participar en acciones de vigilancia y promoción de la salud en el territorio, así como entender su motivación para participar en proyectos de IC. Metodología: la metodología incluyó el análisis de las redacciones escritas para la selección al Curso de Formación para Iniciación Científica en Educación Básica y Arbovirus, la administración de este curso y, posteriormente, un grupo focal con los estudiantes para analizar el proceso educativo de IC que vivieron. Resultados: los resultados del Análisis de Contenido mostraron la percepción de los estudiantes sobre la IC enfocada en seis categorías analíticas: motivación de los estudiantes por la iniciación científica; proceso de formación de conocimientos; formación de jóvenes científicos; salud y medio ambiente; participación y empoderamiento de los jóvenes y percepciones sobre el Sistema Público de Salud (SUS). Conclusiones: Enfrentar los arbovirus requiere políticas e intervenciones de amplio espectro, y la IC fortaleció a estos jóvenes estudiantes como sujetos de derechos, ampliando su percepción sobre ciencia, salud, relación con el entorno, con el Sistema Único de Salud y estimuló el interés en acciones preventivas en la lucha contra los arbovirus en estos territorios.

Statistical simplex centroid experimental design for evaluation of pectin, modified chitosan and modified starch as encapsulating agents on the development of vitamin E-loaded microparticles by spray-drying.

Vitamin E encapsulation into biopolymer-based microparticles, obtained by spray-drying technology, was proposed to improve the encapsulation efficiency and the controlled release of fat-soluble vitamin. Binary and ternary blends of pectin, modified chitosan and modified starch, modified starch + modified chitosan, modified starch + pectin, modified chitosan + pectin and modified starch + modified chitosan + pectin ((0.33, 0.33, 0.33), (0.70, 0.15, 0.15), (0.15, 0.70, 0.15) and (0.15, 0.15, 0.70)) were proposed to produce and evaluate different carrier-based delivery systems. Vitamin E-loaded microparticles and empty microparticles were created with a product yield between 9 and 49 %. The mean diameter among all microparticles varied between 3.74 ± 0.02 and 421 ± 21 µm (differential volume distribution). Oval, spherical or irregular microparticles, with a variable morphology from a smooth to a high rough surface structure, with concavities, were produced. All vitamin E-loaded microparticles exhibited an encapsulation efficiency higher than 70 %. The slower vitamin E controlled release was observed from microparticles composed by modified chitosan (>36 h), while the faster release was achieved from microparticles individually composed by pectin (39 min). In general, the Fickian diffusion is the main release mechanism involved in the microparticles produced with modified chitosan, other formulations combine also other mechanisms such as swelling.

Characterization of percutaneous absorption of calcium, magnesium, and potentially toxic elements in two tailored sulfurous therapeutic peloids: a comprehensive in vitro pilot study.

Pelotherapy treatments in thermal spas, which utilize peloids composed of clay minerals mixed with saltwater or mineral-medicinal water, can have various effects on spa users, ranging from therapeutic to potential adverse reactions. Despite the widespread use of peloids, comprehensive information on the penetration and permeation of essential and potentially toxic elements into deeper layers of the skin during pelotherapy is limited. Understanding the concentrations of these elements is crucial for evaluating therapeutic benefits and ensuring safety. This study investigates the in vitro availability and absorption of calcium, magnesium, and potentially toxic elements in two peloids, considering their formulation matrix. To replicate the pelotherapy methodology, an in vitro permeation experiment was conducted using a vertical diffusion chamber (Franz cells) and a biological system with human skin membranes from five Caucasian women, age range between 25 and 51 years. The experiment involved heating the peloids to 45℃. The results emphasize the possible transport properties of chemical elements in peloids, providing valuable information related to potential therapeutic efficacy and safety considerations. Despite no apparent differences between peloids' chemical composition, the method identified permeation variations among chemical elements. The methodology employed in this study adheres to the guidelines outlined by OECD for analyzing skin absorption through an in vitro approach. Furthermore, it aligns with the associated OECD guidance document for conducting skin absorption studies. The replicability of this methodology not only facilitates the analysis of peloids pre-formulation but also provides a robust means to evaluate the effectiveness of therapeutic elements during topical administration, particularly those with potential toxicity concerns.

Chemical attributes, bacterial community, and antibiotic resistance genes are affected by intensive use of soil in agro-ecosystems of the Atlantic Forest, Southeastern Brazil.

Soil is one of the largest reservoirs of microbial diversity in nature. Although soil management is vital for agricultural purposes, intensive practices can have a significant impact on fertility, microbial community, and resistome. Thus, the aim of this study was to evaluate the effects of an intensive soil management system on the chemical attributes, composition and structure of prevalent bacterial communities, and presence and abundance of antimicrobial resistance genes (ARGs). The chemical characterization, bacterial diversity and relative abundance of ARGs were evaluated in soils from areas of intensive vegetable cultivation and forests. Results indicate that levels of nutrients and heavy metals were higher in soil samples from cultivated areas. Similarly, greater enrichment and diversity of bacterial genera was detected in agricultural areas. Of the 18 target ARGs evaluated, seven were detected in studied soils. The oprD gene exhibited the highest abundance among the studied genes and was the only one that showed a significantly different prevalence between areas. The oprD gene was identified only from soil of the cultivated areas. The blaSFO, erm(36), oprD and van genes, in addition to the pH, showed greater correlation with in soil of cultivated areas, which in turn exhibited higher contents of nutrients. Thus, in addition to changes in chemical attributes and in the microbial community of the soil, intensive agricultural cultivation systems cause a modification of its resistome, reinforcing the importance of the study of antimicrobial resistance in a One Health approach.

In vitro bioaccessibility and intestinal transport of retinoic acid in ethyl cellulose-based microparticles and impact of meal co-ingestion.

The development of carrier-based delivery systems for oral administration of retinoic acid (RA), that provides its release and absorption at intestinal level, is of major relevance in the treatment of acute promyelocytic leukemia. The aim of this work was to evaluate RA bioaccessibility and intestinal transport on ethyl cellulose (EC)- and EC + polyethylene glycol (ECP)-based microparticles and to understand the impact of meal co-ingestion by applying in vitro assays. RA-loaded microparticles were produced by spray-drying with an encapsulation efficiency higher than 90 % for both formulations. The gastric bioaccessibility of RA (after in vitro static digestion of RA-loaded particles) was lower than 3 % for both types of microparticles, with and without meal co-ingestion. Whereas after intestinal digestion, RA bioaccessibility was significantly higher and affected by the type of microparticles and the presence of meal. The digestion of EC- and ECP-based microparticles without diet enabled a significantly higher bioaccessibility of RA when compared to the one recorded for the co-digestion of these microparticles with diet. Herein, RA bioaccessibility decreased from 84 ± 1 to 24 ± 6 % (p < 0.0001) for microparticles EC and 54 ± 4 to 25 ± 5 % (p < 0.001) for microparticles ECP. Moreover, comparing both types of microparticles, RA bioaccessibility was significantly higher for EC-based microparticles digested without diet (p < 0.0001). At last, the bioaccessibility of RA was similar among EC- and ECP-based microparticles when co-digested with diet. Intestinal transport experiments performed in Caco-2 monolayers evidenced that after 2 h of transport the amount of RA retained in the apical compartment was higher than the amount that reached the basolateral compartment evidencing a slow transport at intestinal level that was higher when RA is spiked in the blank of digestion and the meal digestion samples compared to RA dissolved in HBSS (44 ± 6 (p < 0.01) and 38 ± 1 (p < 0.05) vs 26 ± 2 %, respectively).

Quantification of Surface Tension Effects and Nucleation-and-Growth Rates during Self-Assembly of Biological Condensates.

Liquid-solid and liquid-liquid phase separation (PS) drives the formation of functional and disease-associated biological assemblies. Principles of phase equilibrium are here employed to derive a general kinetic solution that predicts the evolution of the mass and size of biological assemblies. Thermodynamically, protein PS is determined by two measurable concentration limits: the saturation concentration and the critical solubility. Due to surface tension effects, the critical solubility can be higher than the saturation concentration for small, curved nuclei. Kinetically, PS is characterized by the primary nucleation rate constant and a combined rate constant accounting for growth and secondary nucleation. It is demonstrated that the formation of a limited number of large condensates is possible without active mechanisms of size control and in the absence of coalescence phenomena. The exact analytical solution can be used to interrogate how the elementary steps of PS are affected by candidate drugs.

Pharmaceutical/Clinical Strategies in the Treatment of Acute Promyelocytic Leukemia: All-Trans Retinoic Acid Encapsulation by Spray-Drying Technology as an Innovative Approach-Comprehensive Overview.

Acute promyelocytic leukemia (APL) is phenotypically characterized by the accumulation of dysplastic promyelocytes, resulting from a cytogenetic condition due to the balanced chromosomal translocation t(15;17)(q22;q21). Current first-line treatment of APL includes all-trans retinoic acid (all-trans RA), with or without arsenic trioxide, combined with chemotherapy, and a chemotherapy-free approach wherein arsenic trioxide is used alone or in combination with all-trans RA. The usage of all-trans RA revolutionized the treatment of APL, with survival rates of 80 to 90% being achieved. The mechanism of action of all-trans RA is based on regulation of gene transcription, promoting the differentiation of leukemic promyelocytes. Encapsulation technology has been explored as an innovative strategy to overcome the major drawbacks related to the all-trans RA oral administration in the APL treatment. The most recently published works on this subject highlight the development and optimization of carrier-based delivery systems based in microparticle formulations obtained by spray-drying to be used in the treatment of APL. The ultimate goal is to obtain a controlled delivery system for RA oral administration capable of providing a slow release of this bioactive compound in the intestinal lumen.

Bioaccessibility by perspiration uptake of minerals from two different sulfurous peloids.

The risks associated with the use of peloids in thermal centers, spas, or at home, must be tested to develop appropriate safety guidelines for peloids formulations and the release of substances of high concern. Additionally, the beneficial effects of some elements on human health should be assessed to aid in interpreting the therapeutic action and effectiveness of pelotherapy on dermatological or osteomuscular disorders. Therefore, a methodology was developed to better understand the biogeochemical behavior of the elements in formulated peloids. Two peloids were formulated with the same clay and two different sulfurous mineral-medicinal waters for 90 days, with light stirring every 15 days. Bentonite clay, with a high content of smectite and Ca and Mg as the main exchangeable cations, and high heat capacity, was used. The selected mineral-medicinal waters were collected from two Portuguese thermal centers with recognized therapeutic efficacy for rheumatic, respiratory and dermatological pathologies. The peloids were used without drying and withdrawn directly from the maturation tank, and a mixture of bentonite and demineralized water was prepared as a reference sample. A stabilized, ready-to-use, artificial perspiration test was used to simulate the peloids' interaction with skin. Thirty-one elements extracted from the two prepared peloids were analyzed using ICP-MS. The data were analyzed and related to the mineralogical composition of the original clay and supernatant composition of the maturation tanks. The content of some potentially toxic elements and metals' bioaccessibility by perspiration showed very low solubility and undetectable amounts extracted from the studied samples. This analytical method provided reliable information on dermal exposure and the identification of some elements that may enter the systemic circulation, requiring implementation of surveillance and control measures.

Neuroprotective effects of açaí (Euterpe oleracea Mart.) against diabetic retinopathy.

Introduction: Diabetes mellitus describes a metabolic disorder of multiple etiologies, characterized by chronic hyperglycemia, which induces a series of molecular events capable of leading to microvascular damage, affecting the blood vessels of the retina, causing diabetic retinopathy. Studies indicate that oxidative stress plays a central role in complications involving diabetes. Açaí (Euterpe oleracea) has attracted much attention given its antioxidant capacity and potential associated health benefits in preventing oxidative stress, one of the causes of diabetic retinopathy. The objective of this work was to evaluate the possible protective effect of açaí (E. oleracea) on the retinal function of mice with induced diabetes, based on full field electroretinogram (ffERG). Methods: We opted for mouse models with induced diabetes by administration of a 2% alloxan aqueous solution and treatment with feed enriched with açaí pulp. The animals were divided into 4 groups: CTR (received commercial ration), DM (received commercial ration), DM + açaí (E. oleracea-enriched ration) and CTR + açaí (E. oleracea-enriched ration). The ffERG was recorded three times, 30, 45 and 60 days after diabetes induction, under scotopic and photopic conditions to access rod, mixed and cone responses, in addition to monitoring the weight and blood glucose of the animals during the study period. Statistical analysis was performed using the two-way ANOVA test with Tukey's post-test. Results: Our work obtained satisfactory results with the ffERG responses in diabetic animals treated with açaí, where it was observed that there was no significant decrease in the b wave ffERG amplitude of this group over time when compared to the results of the Diabetic group not treated with açaí, which showed a significant reduction of this ffERG component. Discussion: The results of the present study show, for the first time, that treatment with an açaí-enriched diet is effective against the decrease in the amplitude of visual electrophysiological responses in animals with induced diabetes, which opens a new horizon for the prevention of retinal damage in diabetic individuals from treatment with açaí base. However, it is worth mentioning that our findings consist of a preliminary study and further researches and clinical trials are needed to examine açaí potential as an alternative therapy for diabetic retinopathy.

Carbon Sequestration in Resin-Tapped Slash Pine (Pinus elliottii Engelm.) Subtropical Plantations.

Every year more than 150,000 tons of resin used in a myriad of industrial applications are produced by Brazilian plantations of Pinus elliottii Engelm. (slash pine), which are also used for timber. A pine tree can be tapped for resin over a period of several years. Resin is a complex mixture of terpenes, which are carbon-rich molecules, presumably influencing pine plantation carbon budgets. A total of 270 trees (overall mean DBH of 22.93 ± 0.11 cm) of 14-, 24-, and 26-year-old stands had their C content measured. Three different treatments (intact, wounded panels, and wounded + chemically stimulated panels, 30 trees each) were applied per site. Above- and belowground biomass, as well as resin yield, were quantified for two consecutive years. Data were statistically evaluated using normality distribution tests, analyses of variance, and mean comparison tests (p ≤ 0.05). The highest resin production per tree was recorded in the chemically stimulated 14-year-old stand. Tree dry wood biomass, a major stock of carbon retained in cell wall polysaccharides, ranged from 245.69 ± 11.73 to 349.99 ± 16.73 kg among the plantations. Variations in carbon concentration ranged from 43% to 50% with the lowest percentages in underground biomass. There was no significant difference in lignin concentrations. Soils were acidic (pH 4.3 ± 0.10-5.83 ± 0.06) with low C (from 0.05% to 1.4%). Significantly higher C stock values were recorded in pine biomass compared to those reported for temperate zones. Resin-tapping biomass yielded considerable annual increments in C stocks and should be included as a relevant component in C sequestration assessments of planted pine forests.

Soil type determines the magnitude of soil fertility changes by forest-to-pasture conversion in Western Amazonia.

The deforestation of tropical forests raises environmental concerns worldwide. Removing the pristine forest impacts the soil, consequently affecting the environmental services it provides. Within this context, the main goal of this study was to determine how the conversion of the tropical rainforest to pasture affects soil fertility across an extended range of soil heterogeneity, including different soil types. We sampled 13 sites, among forests, recent pastures (≤7-year-old), and old pastures (≥10-year-old), on Acrisols, Ferralsols, Plinthosols, and Luvisols, across a ± 800 km geographical range in the Western Brazilian Amazon. Soils were classified taxonomically, and their superficial layer's chemical and physical properties (0-10 cm) were analyzed. Furthermore, we tested the sensibility of Actinobacteria and Proteobacteria to detect changes in these soil properties based on their ecological habitat. An inter-regional gradient of soil fertility was observed, and the sampling sites were clustered mostly by soil type and associated land use than by spatial distance. The Sum of bases, Ca + Mg, base saturation, Al saturation, and pH were consistently affected by land use, increasing after conversion to pasture, at different degrees and with a more pronounced effect on oxidic soils. The Sum of bases was the only property that increased significantly among the study sites (Radj = 0.860, p < 0.001), being able to detect the effect of anthropic land use on a larger coverage of soil types. Finally, the Actinobacteria:Proteobacteria ratio was also sensitive to the impact of forest-to-pasture conversion, with a higher ratio observed in pasture systems, and it was positively correlated with soil pH (rho = 0.469, p < 0.001). Our results consistently show that the forest-to-pasture conversion leads to strong alterations in the soil environment, with varying intensities depending on soil type.

Co-encapsulation of retinoic acid, curcumin and resveratrol by spray-drying of alginic acid sodium-based emulsions and ethyl cellulose-based solutions: Impact on the co-delivery profiles.

Co-encapsulation of retinoic acid (RA), curcumin and/or resveratrol into microparticles composed by alginic acid sodium and the ethyl cellulose + polyethylene glycol (EC + PEG) blend was proposed for the protection and co-delivery of these bioactive compounds. The final aim is to take benefit of combined therapeutic potential related to these molecules and use loaded microparticles obtained by spray-drying to improve the treatment of acute promyelocytic leukemia (APL). Alginic acid sodium-based emulsions were characterized regarding rheological properties (i.e. viscosity), stability and droplet size distribution. Biopolymer- and synthetic polymer-based microparticles loaded with RA, RA + curcumin, RA + resveratrol and RA + curcumin + resveratrol were produced with a product yield between 10 and 35 %. The obtained microparticles exhibited a variable form, a morphology that varied between a slightly and high rough surface and a mean diameter that ranged from 2.97 ± 0.04 and 88 ± 3 µm. Encapsulation efficiency was significantly influenced by the encapsulating agent(s) used in the microparticles formulations. The bioactive compounds that were co-encapsulated showed a similar release profile.

Geochemical and mineralogical characterization of Ria de Aveiro (Portugal) saltpan sediments for pelotherapy application.

The present study aims to characterize sediments textural, geochemical and mineralogical composition used in a SPA for pelotherapy applications. Six samples were collected in two areas of an open-air saline SPA, a former saltpan in Ria de Aveiro (Portugal). Sampling areas are predominantly composed by recent alluvium that had been affected by chemical industrial effluents for over 50 years. Samples < 2000, 63, and 2 µm fractions were analyzed by X-ray Diffraction (XRD) and X-ray Fluorescence (XRF), for identification of mineral phases and chemical composition. SEM analysis was used for individual particles morphological characterization and chemical semi-quantification. Texture, mineral phases and chemical composition showed the influence of SPA pond beneficiation works. The two SPA areas revealed distinct mineral phases, one with higher quartz content, and the other with higher halite content, consistent with their environmental conditions. Illite constituted the most abundant mineral phase of the clay fraction. Preliminary results suggested concentrations of potential toxic elements (e.g., As, Cd) above reference values, representing a risk to the ecosystem and humans.

Testicular and epididymal dysfunctions: searching a new index for the differential diagnosis / Disfunciones testiculares y epididimarias: búsqueda de un nuevo índice para el diagnóstico diferencial

Objective: This proof-of-principle aims to develop an index to aid the differential diagnosis of disorders affecting testicular and/or epididymis. A total of 202 subject data were evaluated in two groups: fertile men with children naturally conceived within 1 year of unprotected intercourse (n = 36) and infertile men (n = 166) who had attempted a pregnancy more than 1 year with unprotected intercourse. Materials and methods: Semen parameters (sperm count, vitality, motility, morphology, and hypoosmotic swelling test [HOST]) were evaluated. The index was calculated by dividing the percentage HOST by the percentage of sperm progressive motility in the fertile group (n = 36). Results: A normal range from 1.23 to 1.53 was determined. Using this index, the outcomes of semen analysis from infertile men were grouped in three study groups: below 1.23 (n = 24), normal (n = 44), and higher than 1.53 (n = 98). These parameters were significantly decreased in semen with normal range (p < 0.01) and in indexes higher than 1.53 (p < 0.0001). Receiver operating characteristic curves compared progressive motility and morphology in infertile men with indexes higher than 1.53 shows that semen samples with normal sperm progressive motility and morphology did not suggest dysfunctions in testis and epididymis. Semen samples with asthenozoospermia suggested epididymal dysfunction (area under the curve [AUC] 0.889, confidence interval [CI] 0.783-1), whereas semen samples with teratoasthenozoospermia suggested dysfunction in both testicles and epididymis (AUC 0.891, CI 0.77-1). Conclusions: The current index proof-of-principle of the success of such a strategy provides valuable information about whether a disorder individually affects testicular and/or epididymal function.

Objetivo: Esta prueba de principio tiene como objetivo desarrollar un índice que ayude al diagnóstico diferencial de los trastornos testiculares y/o epidídimales. Métodos: Se evaluaron 202 individuos divididos en dos grupos: hombres fértiles con hijos concebidos de forma natural en el plazo no mayor a un año (n = 36) y hombres infértiles (n = 166), los cuales habían intentado un embarazo por más de un año. Se evaluaron los parámetros seminales (concentración, viabilidad, movilidad, morfología y prueba de hinchazón hipoosmótica [HOST]). El índice se calculó dividiendo el porcentaje de HOST por el porcentaje de movilidad espermática progresiva en el grupo fértil (n = 36). Resultados: Se determinó un rango normal de 1,23 a 1,53. Utilizando este índice, los resultados del análisis del semen de los hombres infértiles se agruparon en tres grupos de estudio: por debajo de 1,23 (n = 24), normal (n = 44) y superior a 1,53 (n = 98). En contraste, estos parámetros disminuyeron significativamente en el semen de rango normal (p < 0,01) y en los índices superiores a 1,53 (p < 0,0001). Las curvas ROC comparadas con la movilidad espermática progresiva y la morfología en los hombres infértiles con índices superiores a 1,53 muestran que las muestras de semen con movilidad progresiva y morfología normales no sugieren disfunciones en los testículos y epidídimos. Las muestras de semen con astenozoospermia sugerirían una disfunción del epidídimo (AUC 0,889, IC 0,783-1), mientras que las muestra de semen que presentaban teratoastenozoospermia sugerirían una disfunción tanto en los testículos como en el epidídimo (AUC 0,891, IC 0,77-1).

Increased exfoliation of immature germ cells detected in semen analysis routine and its clinical significance.

To the Editor, Currently, semen analysis is the unique test to evaluate men's fertility potential. Semen analysis provides valuable information on sperm production and quality. In addition to the conventional assessment of the sperm characteristics in a basic semen analysis routine, performing a differential diagnosis of leukocytes and sperm precursors immature germ cells (IGC) is also pivotal, due to adding valuable and clinically suitable information to the semen report [...].

Electrospinning of Microstructures Incorporated with Vitamin B9 for Food Application: Characteristics and Bioactivities.

The food industry has been expanding, and new vectors to entrap vitamins have been constantly investigated, aiming at versatile systems with good physico-chemical characteristics, low-cost production, high stability and the efficient release of active ingredients. The vitamin B9 (folic acid or folate) is essential for the healthy functioning of a variety of physiological processes in humans and is beneficial in preventing a range of disorders. In this study, two approaches were developed to encapsulate vitamin B9. Zein and the combination of modified starch with two plasticizers were the selected encapsulating agents to produce microstructures via the electrospinning technique. The objective was to improve the stability and the B9 antioxidant capacity in the final formulations. The work strategy was to avoid limitations such as low bioavailability, stability and thermosensitivity. The microstructures were fabricated and the morphology and shape were assessed by scanning electron microscopy. The B9 release profiles of modified starch and zein microstructures were analyzed in simulated gastric fluid at 37 °C, and in deionized water and ethanol at room temperature. The B9 encapsulation efficiency and the stability of the systems were also studied. The ABTS assay was assessed and the antioxidant activity of the produced microstructures was evaluated. The physico-chemical characterization of loaded B9 in the microstructures was achieved. High encapsulation efficiency values were achieved for the 1% B9 loaded in 12% w/w modified starch film; 5% B9 vitamin encapsulated by the 15% w/w modified starch with 4% w/w tween 80; and 4% w/w glycerol film with heterogeneous microstructures, 5% w/w zein compact film and 10% w/w zein film. In conclusion, the combinations of 7 wt.% of modified starch with 4 wt.% tween 80 and 4 wt.% glycerol; 15 wt.% of modified starch with 4 wt.% tween 80 and 4 wt.% glycerol; and 12 wt.% modified starch and 5 wt.% zein can be used as delivery structures in order to enhance the vitamin B9 antioxidant activity in the food and nutraceutical fields.

Dysbiosis and predicted function of dental and ruminal microbiome associated with bovine periodontitis.

Extensive cattle livestock is advancing in Amazonia and its low productivity, with consequent pressure to open new areas, is partly due to sanitary problems and, among them, the periodontal diseases, whose environmental triggers or modifying factors are unknown. In this study, we used high-throughput sequencing, network analysis and predicted functions to investigate the dental and ruminal microbiota of cattle raised in new livestock areas in the Amazon and identify possible keystone pathogens and proteins associated with the disease. Ninety-three genera were common in dental and ruminal fluid microbiomes and among them periodontal pathogens such as Fusobacterium, Prevotella, Porphyromonas and Actinomyces were recognized. Network analysis showed that dental microbiomes of clinically healthy animals tend to comprise a group of OTUs in homeostasis and when analyzed together, dental and ruminal fluid microbiomes of animals with periodontitis had almost twice the number of negative edges, indicating possible competition between bacteria and dysbiosis. The incisor dental and ruminal fluid microbiomes were dominated by a core community composed of members of the phyla Firmicutes and Bacteroidetes. Network results showed that members of the Prevotella genus stood out among the top five OTUs, with the largest number of hubs in the dental and ruminal microbiota of animals with periodontitis. Protein families linked to an inflammatory environment were predicted in the dental and ruminal microbiota of cattle with periodontitis. The dissimilarity between dental microbiomes, discriminating between healthy cattle and those with periodontitis and the identification of possible key pathogens, represent an important reference to elucidate the triggers involved in the etiopathogenesis of bovine periodontitis, and possibly in the development of measures to control the disease and reduce the pressures for deforestation.

Application of Ethyl Cellulose and Ethyl Cellulose + Polyethylene Glycol for the Development of Polymer-Based Formulations using Spray-Drying Technology for Retinoic Acid Encapsulation.

Ethyl cellulose (EC)-based microparticles, with and without the incorporation of polyethylene glycol (PEG) as a second encapsulating agent, were prepared using the spray-drying process for the encapsulation of retinoic acid (RA). The production of a suitable controlled delivery system for this retinoid will promote its antitumor efficiency against acute promyelocytic leukemia (APL) due to the possibility of increasing the bioavailability of RA. Product yield ranged from 12 to 28% in all the microparticle formulations, including unloaded microparticles and RA-loaded microparticles. Microparticles with a mean diameter between 0.090 ± 0.002 and 0.54 ± 0.02 µm (number size distribution) and with an irregular form and rough surface were obtained. Furthermore, regarding RA-loaded microparticles, both polymer-based formulations exhibited an encapsulation efficiency of around 100%. A rapid and complete RA release was reached in 40 min from EC- and EC + PEG-based microparticles.