RESUMO
Subcutaneous (SC) injection is a common route of administration for drug compounds with poor oral bioavailability. However, bioavailability is often variable and incomplete, and there is as yet no standard accepted medium for simulation of the human SC environment. In this work we evaluate a FRAP based method for quantitative determination of local self-diffusion coefficients within extracellular matrix (ECM) mimetic hydrogels, potentially useful as in vitro models for drug transport in the ECM after SC injection. Gels were made consisting of either agarose, cross-linked collagen (COL) and hyaluronic acid (HA) or cross-linked HA. The diffusivities of uncharged FITC-dextran (FD4), the highly charged poly-lysine (PLK20) and poly-glutamic acid (PLE20) as well as the GLP-1 analogue exenatide were determined within the gels using FRAP. The diffusion coefficients in uncharged agarose gels were in the range of free diffusion in PBS. The diffusivity of cationic PLK20 in gels containing anionic HA was substantially decreased due to strong electrostatic interactions. Peptide aggregation could be observed as immobile fractions in experiments with exenatide. We conclude that the FRAP method provides useful information of peptides' interactions and transport properties in hydrogel networks, giving insight into the mechanisms affecting absorption of drug compounds after subcutaneous injection.
RESUMO
Small synthetic mimics of cationic antimicrobial peptides represent a promising class of compounds with leads in clinical development for the treatment of persistent microbial infections. The activity and selectivity of these compounds rely on a balance between hydrophobic and cationic components, and here, we explore the activity of 19 linear cationic tripeptides against five different pathogenic bacteria and fungi, including clinical isolates. The compounds incorporated modified hydrophobic amino acids inspired by motifs often found in bioactive marine secondary metabolites in combination with different cationic residues to probe the possibility of generating active compounds with improved safety profiles. Several of the compounds displayed high activity (low µM concentrations), comparable with the positive controls AMC-109, amoxicillin, and amphotericin B. A higher activity was observed against the fungal strains, and a low in vitro off-target toxicity was observed against erythrocytes and HeLa cells, thereby illustrating effective means for tuning the activity and selectivity of short antimicrobial peptides.
RESUMO
Colonic mucus plays a key role in colonic drug absorption. Mucus permeation assays could therefore provide useful insights and support rational formulation development in the early stages of drug development. However, the collection of native colonic mucus from animal sources is labor-intensive, does not yield amounts that allow for routine experimentation, and raises ethical concerns. In the present study, we developed an in vitro porcine artificial colonic mucus model based on the characterization of native colonic mucus. The structural properties of the artificial colonic mucus were validated against the native secretion for their ability to capture key diffusion patterns of macromolecules in native mucus. Moreover, the artificial colonic mucus could be stored under common laboratory conditions, without compromising its barrier properties. In conclusion, the porcine artificial colonic mucus model can be considered a biorelevant way to study the diffusion behavior of drug candidates in colonic mucus. It is a cost-efficient screening tool easily incorporated into the early stages of drug development and it contributes to the implementation of the 3Rs (refinement, reduction, and replacement of animals) in the drug development process.
Assuntos
Colo , Muco , Animais , Suínos , Difusão , Desenvolvimento de Medicamentos , BioensaioRESUMO
Volume changes of responsive microgels can probe interactions between polyelectrolytes and species of opposite charges such as peptides and proteins. We have investigated a microfluidics method to synthesize highly responsive, covalently crosslinked, hyaluronic acid microgels for such purposes. Sodium hyaluronate (HA), pre-modified with ethylacrylamide functionalities, was crosslinked in aqueous droplets created with a microfluidic technique. We varied the microgel properties by changing the degree of modification and concentration of HA in the reaction mixture. The degree of modification was determined by 1H NMR. Light microscopy was used to investigate the responsiveness of the microgels to osmotic stress in aqueous saline solutions by simultaneously monitoring individual microgel species in hydrodynamic traps. The permeability of the microgels to FITC-dextrans of molecular weights between 4 and 250 kDa was investigated using confocal laser scanning microscopy. The results show that the microgels were spherical with diameters between 100 and 500 µm and the responsivity tunable by changing the degree of modification and the HA concentration. Microgels were fully permeable to all investigated FITC-dextran probes. The partitioning to the microgel from an aqueous solution decreased with the increasing molecular weight of the probe, which is in qualitative agreement with theories of homogeneous gel networks.
RESUMO
Subcutaneous injection is one of the most common approaches for administering biopharmaceuticals unsuitable for oral delivery. However, there is a lack of methods to predict the behavior of biopharmaceuticals within the extracellular matrix of the subcutaneous tissue. In this work, we present a novel miniaturized microfluidic-based in vitro method able to investigate interactions between drug molecules and the polymers of the subcutaneous extracellular matrix. To validate the method, microgels consisting of, respectively, covalently cross-linked hyaluronic acid, polyacrylic acid, and commercially available DC Bead™, were exposed to three model substances: cytochrome C, protamine sulfate and amitriptyline hydrochloride. These components were chosen to include systems with widely different physiochemical properties (charge, size, self-assembly, etc.) The experimental results were compared with theoretical predictions from a gel model developed earlier. The results show that the method is suitable as a rapid screening method for automated, large-scale, probing of interactions between biopolymers and drug molecules, with small consumption of material.
Assuntos
Produtos Biológicos , Microgéis , Microfluídica , Peptídeos , PolieletrólitosRESUMO
Gastrointestinal (GI) mucus is continuously secreted and lines the entire length of the GI tract. Essential for health, it keeps the noxious luminal content away from the epithelium. Our aim was to characterize the composition and structure of mucus throughout the various GI segments in dog. Mucus was collected from the stomach, small intestine (duodenum, jejunum, ileum), and large intestine (cecum, proximal and distal colon) from dogs. Composition was determined by multi-omics. Structural properties were investigated using cryoSEM and rheology. GI mucus contained 74-95% water and maintained a pH around 6.5. The proteome was similar across the different GI segments. The highest abundant secreted gel-forming mucin in the gastric mucus was mucin 5AC, whether mucin 2 had highest abundance in the intestinal mucus. Lipid and metabolite abundance was generally higher in the jejunal mucus than the colonic mucus. CryoSEM microscopy revealed smaller pore size in small intestinal mucus, which increased in the large intestine. All mucus samples showed shear-thinning behavior and characteristics of gel-like structure. In conclusion, the mucus is a highly viscous and hydrated material. These data provide an important baseline for future studies on human and canine intestinal diseases and the dog model in drug absorption.
Assuntos
Intestino Delgado , Muco , Animais , Colo/metabolismo , Cães , Trato Gastrointestinal/metabolismo , Mucosa Intestinal/metabolismo , Intestino Delgado/metabolismo , Muco/metabolismo , EstômagoRESUMO
The gastrointestinal mucus is a hydrogel that lines the luminal side of the gastrointestinal epithelium, offering barrier protection from pathogens and lubrication of the intraluminal contents. These barrier properties likewise affect nutrients and drugs that need to penetrate the mucus to reach the epithelium prior to absorption. In order to assess the potential impact of the mucus on drug absorption, we need information about the nature of the gastrointestinal mucus. Today, most of the relevant available literature is mainly derived from rodent studies. In this work, we used a larger animal species, the pig model, to characterize the mucus throughout the length of the gastrointestinal tract. This is the first report of the physiological properties (physical appearance, pH and water content), composition (protein, lipid and metabolite content) and structural profiling (rheology and gel network) of the porcine gastrointestinal mucus. These findings allow for direct comparisons between the characteristics of mucus from various segments and can be further utilized to improve our understanding of the role of the mucus on region dependent drug absorption. Additionally, the present work is expected to contribute to the assessment of the porcine model as a preclinical species in the drug development process.
Assuntos
Absorção Gastrointestinal , Trato Gastrointestinal , Animais , Avaliação Pré-Clínica de Medicamentos/métodos , Absorção Gastrointestinal/efeitos dos fármacos , Absorção Gastrointestinal/fisiologia , Trato Gastrointestinal/anatomia & histologia , Trato Gastrointestinal/fisiologia , Concentração de Íons de Hidrogênio , Redes e Vias Metabólicas/efeitos dos fármacos , Redes e Vias Metabólicas/fisiologia , Modelos Animais , Mucosa/anatomia & histologia , Mucosa/fisiologia , Reologia/métodos , SuínosRESUMO
Hydrophobic interaction chromatography is a very popular chromatography method for purification of proteins and plasmids in all scales from analytical to industrial manufacturing. Despite this frequent use, the complex interaction mechanism and the thermodynamic aspects of adsorption in hydrophobic interaction chromatography are still not well understood. Calorimetric methods such as isothermal titration calorimetry and flow calorimetry can help to gain a deeper understanding of the adsorption strength, the influence of salt type and temperature. They can be used to study conformational changes of proteins, which are often associated with the adsorption in hydrophobic interaction chromatography. This review offers a detailed introduction into the thermodynamic fundamentals of adsorption in hydrophobic interaction chromatography with a special focus on the potential applications of isothermal titration calorimetry and flow calorimetry for studying specific problems and relationships of the adsorption behavior of proteins and its various influencing factors. Models for characterizing conformational changes upon adsorption are presented together with methods for assessing this problem for different proteins and stationary phases. All of this knowledge can contribute greatly to forming a sound basis for method development, process optimization and finding modelling strategies in hydrophobic interaction chromatography.
Assuntos
Calorimetria/métodos , Cromatografia Líquida/métodos , Proteínas/química , Adsorção , Interações Hidrofóbicas e Hidrofílicas , TermodinâmicaRESUMO
Alternative separation methods operating in an aqueous environment are of increasing importance for further progress of molecular separation in life sciences and other industrial sectors working towards a biobased economy. By spincoating, membranes with thicknesses under 100 nm and 20 cm2 surface area were prepared from an epoxy based resin. For the first time such ultrathin epoxy films were used for the selective separation of small molecules and metabolites within an aqueous environment. Initially, selectivity is demonstrated by the separation of two dyes of similar size (0.7 and 1.4 nm diameter). By variation of the precursor concentrations, both mechanical stability and selectivity for molecular transport are shown to be tunable. The observed transport properties of the different membranes correlated with their biaxial moduli and ultimate tensile strengths which were in the range of 0.3-3.5 GPa and 10-44 MPa, respectively. These observations agreed with the conclusion drawn from FTIR analysis that variations in the covalent crosslinking density determine the emergent properties. Finally, permeation rates for small molecules of industrial relevance were assessed to confirm a size based diffusion cutoff for compounds with hydrodynamic diameters below 2 nm.
Assuntos
Membranas Artificiais , Aspirina , Compostos Azo , Corantes , Difusão , Resinas Epóxi/química , Nanoestruturas , Fenilalanina , Corantes de Rosanilina , SuccinatosRESUMO
We developed a novel analytical method for concentration determination of tandem single-chain antibody diphtheria toxin (immunotoxin). The method is based on polymethacrylate monoliths with Protein L ligands as the binding moiety. Different buffers were tested for elution of the Protein L-bound immunotoxin and 4.5 M guanidinium hydrochloride performed best. We optimized the elution conditions and the method sequence resulting in a fast and robust method with a runtime <10 min. Fast determination of immunotoxin is critical if any process decisions rely on this data. We determined method performance and a lower limit of detection of 27 µg/mL and a lower limit of quantification of 90 µg/mL was achieved. The validity of the method in terms of residual analysis, precision, and repeatability was proven in a range from 100 to 375 µg/mL. The short runtime and ease of use of a high-performance liquid chromatography method is especially useful for a process analytical tool approach. Bioprocesses related to immunotoxin where fermentation or other process parameters can be adjusted in accordance to the immunotoxin levels will be benefited from this method to achieve the highest possible purity and productivity.
Assuntos
Cromatografia de Afinidade , Imunotoxinas/análise , Ácidos Polimetacrílicos/química , Cromatografia Líquida de Alta Pressão , LigantesRESUMO
Heat of adsorption is an excellent measure for adsorption strength and, therefore, very useful to study the influence of salt and temperature in hydrophobic interaction chromatography. The adsorption of bovine serum albumin and ß-lactoglobulin to Toyopearl Butyl-650 M was studied with isothermal titration calorimetry to follow the unfolding of proteins on hydrophobic surfaces. Isothermal titration calorimetry is established as an experimental method to track conformational changes of proteins on stationary phases. Experiments were carried out at two different salt concentrations and five different temperatures. Protein unfolding, as indicated by large changes of molar enthalpy of adsorption Δhads , was observed to be dependent on temperature and salt concentration. Δhads were significantly higher for bovine serum albumin and ranged from 578 (288 K) to 811 (308 K) kJ/mol for 1.2 mol/kg ammonium sulfate. Δhads for ß-lactoglobulin ranged from 129 kJ/mol (288 K) to 186 kJ/mol (308 K). For both proteins, Δhads increased with increasing temperature. The influence of salt concentration on Δhads was also more pronounced for bovine serum albumin than for ß-lactoglobulin. The comparison of retention analysis evaluated by the van't Hoff algorithm shows that beyond adsorption other processes occur simultaneously. Further interpretation such as unfolding upon adsorption needs other in situ techniques.
Assuntos
Calorimetria , Lactoglobulinas/química , Soroalbumina Bovina/química , Adsorção , Algoritmos , Animais , Bovinos , Interações Hidrofóbicas e Hidrofílicas , Desdobramento de Proteína , TermodinâmicaRESUMO
Selective removal of nanometer-sized compounds such as proteins from fluids is an often challenging task in many scientific and industrial areas. Addressing such tasks with highly efficient and selective membranes is desirable since commonly used chromatographic approaches are expensive and difficult to scale up. Nanomembranes, molecularly thin separation layers, have been predicted and shown to possess outstanding properties but in spite ultra-fast diffusion times and high-resolution separation, to date they generally lack either of two crucial characteristics: compatibility with biological fluids and low-cost production. Here we report the fast and easy fabrication of highly crosslinked polymer membranes based on a thermoset resin (poly[(o-cresyl glycidyl ether)-co-formaldehyde (PCGF) cured with branched polyethyleneimine (PEI)) with nanoscale perforations of 25 nm diameter. During spin casting, microphase separation of a polylactide-co-glycolide induces the formation of nanometer sized domains that serve as templates for perforations which penetrate the 80 nm thick membranes. Ultrathin perforated nanomembranes can be freely suspended on the cm scale, exhibit high mechanical strength, low surface energies and a sharp permeability cutoff at a hydrodynamic diameter of 10 nm suitable for protein separations.
Assuntos
Membranas Artificiais , Polímeros/química , Proteínas/isolamento & purificação , Fenômenos Químicos , Difusão , Fenômenos Mecânicos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Permeabilidade , Porosidade , Proteínas/químicaRESUMO
LysM motifs are carbohydrate-binding modules found in prokaryotes and eukaryotes. They have general N-acetylglucosamine binding properties and therefore bind to chitin and related carbohydrates. In plants, plasma-membrane-bound proteins containing LysM motifs are involved in plant defence responses, but also in symbiotic interactions between plants and microorganisms. Filamentous fungi secrete LysM proteins that contain several LysM motifs but no enzymatic modules. In plant pathogenic fungi, for LysM proteins roles in dampening of plant defence responses and protection from plant chitinases were shown. In this study, the carbohydrate-binding specificities and biological function of the LysM protein TAL6 from the plant-beneficial fungus Trichoderma atroviride were investigated. TAL6 contains seven LysM motifs and the sequences of its LysM motifs are very different from other fungal LysM proteins investigated so far. The results showed that TAL6 bound to some forms of polymeric chitin, but not to chito-oligosaccharides. Further, no binding to fungal cell wall preparations was detected. Despite these rather weak carbohydrate-binding properties, a strong inhibitory effect of TAL6 on spore germination was found. TAL6 was shown to specifically inhibit germination of Trichoderma spp., but interestingly not of other fungi. Thus, this protein is involved in self-signalling processes during fungal growth rather than fungal-plant interactions. These data expand the functional repertoire of fungal LysM proteins beyond effectors in plant defence responses and show that fungal LysM proteins are also involved in the self-regulation of fungal growth and development.
Assuntos
Quitina/metabolismo , Quitinases/metabolismo , Proteínas Fúngicas/metabolismo , Trichoderma/metabolismo , Sequência de Aminoácidos , Proteínas Fúngicas/genética , Proteínas Fúngicas/isolamento & purificação , Dados de Sequência Molecular , Homologia de Sequência de Aminoácidos , Esporos Bacterianos/genética , Trichoderma/crescimento & desenvolvimentoRESUMO
For BSA and beta-lactoglobulin adsorption to hydrophobic interaction chromatography (HIC) stationary phases leads to conformational changes. In order to study the enthalpy (DeltaH(ads)), entropy (DeltaS(ads)), free energy (DeltaG(ads)) and heat capacity (Deltac(p,ads)) changes associated with adsorption we evaluated chromatographic data by the non-linear van't Hoff model. Additionally, we performed isothermal titration calorimetry (ITC) experiments. van't Hoff analysis revealed that a temperature raise from 278 to 308K increasingly favoured adsorption seen by a decrease of DeltaG(ads) from -12.9 to -20.5kJ/mol for BSA and from -6.6 to -13.2kJ/mol for beta-lactoglobulin. Deltac(p,ads) values were positive at 1.2m (NH(4))(2)SO(4) and negative at 0.7m (NH(4))(2)SO(4). Positive Deltac(p,ads) values imply hydration of apolar groups and protein unfolding. These results further corroborate conformational changes upon adsorption and their dependence on mobile phase (NH(4))(2)SO(4) concentration. ITC measurements showed that DeltaH(ads) is dependent on surface coverage already at very low loadings. Discrepancies between DeltaH(ads) determined by van't Hoff analysis and ITC were observed. We explain this with protein conformational changes upon adsorption which are not accounted for by van't Hoff analysis.