Analyzing multiple acoustic diffraction over a wide barrier using equivalent knife-edge geometries and Babinet's principle (L).

We present a new method for the calculation of the multiple acoustic diffraction caused by the presence of a wide barrier. Our solution decomposes the initial scenario into an equivalent sum of geometries that only consider knife-edges. Then, by applying Babinet's principle, the total acoustic field that reaches the receiving point, which can be located at an arbitrary position, can be calculated via the uniform theory of diffraction. This method is mathematically less complex and computationally more efficient than most existing techniques. The results are validated (with and without ground reflection) by the solid agreement obtained with other solutions that solve the problem by considering the wide barrier as such, with our proposed method yielding a lower computational time (except against semi-empirical formulations) and better accuracy when compared with measurements. The presented solution can be applied in urban environments where the impact of traffic noise on residential buildings located along roads or highways needs to be evaluated, as well as in scenarios in which the insertion loss caused by a rectangular obstacle, such as a noise barrier, is to be calculated.

Constrained IoT-Based Machine Learning for Accurate Glycemia Forecasting in Type 1 Diabetes Patients.

Individuals with diabetes mellitus type 1 (DM1) tend to check their blood sugar levels multiple times daily and utilize this information to predict their future glycemic levels. Based on these predictions, patients decide on the best approach to regulate their glucose levels with considerations such as insulin dosage and other related factors. Nevertheless, modern developments in Internet of Things (IoT) technology and innovative biomedical sensors have enabled the constant gathering of glucose level data using continuous glucose monitoring (CGM) in addition to other biomedical signals. With the use of machine learning (ML) algorithms, glycemic level patterns can be modeled, enabling accurate forecasting of this variable. Constrained devices have limited computational power, making it challenging to run complex machine learning algorithms directly on these devices. However, by leveraging edge computing, using lightweight machine learning algorithms, and performing preprocessing and feature extraction, it is possible to run machine learning algorithms on constrained devices despite these limitations. In this paper we test the burdens of some constrained IoT devices, probing that it is feasible to locally predict glycemia using a smartphone, up to 45 min in advance and with acceptable accuracy using random forest.

Characterization of a Piezoelectric Acoustic Sensor Fabricated for Low-Frequency Applications: A Comparative Study of Three Methods.

Piezoelectric transducers are widely used for generating acoustic energy, and choosing the right radiating element is crucial for efficient energy conversion. In recent decades, numerous studies have been conducted to characterize ceramics based on their elastic, dielectric, and electromechanical properties, which have improved our understanding of their vibrational behavior and aided in the manufacturing of piezoelectric transducers for ultrasonic applications. However, most of these studies have focused on the characterization of ceramics and transducers using electrical impedance to obtain resonance and anti-resonance frequencies. Few studies have explored other important quantities such as acoustic sensitivity using the direct comparison method. In this work, we present a comprehensive study that covers the design, manufacturing, and experimental validation of a small-sized, easy-to-assemble piezoelectric acoustic sensor for low-frequency applications, using a soft ceramic PIC255 from PI Ceramic with a diameter of 10 mm and a thickness of 5 mm. We present two methods, analytical and numerical, for sensor design, followed by experimental validation, allowing for a direct comparison of measurements with simulated results. This work provides a useful evaluation and characterization tool for future applications of ultrasonic measurement systems.

Assessing Functional Brain Network Dynamics in Dyslexia from fNIRS Data.

Developmental dyslexia is characterized by a deficit of phonological awareness whose origin is related to atypical neural processing of speech streams. This can lead to differences in the neural networks that encode audio information for dyslexics. In this work, we investigate whether such differences exist using functional near-infrared spectroscopy (fNIRS) and complex network analysis. We have explored functional brain networks derived from low-level auditory processing of nonspeech stimuli related to speech units such as stress, syllables or phonemes of skilled and dyslexic seven-year-old readers. A complex network analysis was performed to examine the properties of functional brain networks and their temporal evolution. We characterized aspects of brain connectivity such as functional segregation, functional integration or small-worldness. These properties are used as features to extract differential patterns in controls and dyslexic subjects. The results corroborate the presence of discrepancies in the topological organizations of functional brain networks and their dynamics that differentiate between control and dyslexic subjects, reaching an Area Under ROC Curve (AUC) up to 0.89 in classification experiments.

Applications of Artificial Intelligence, Machine Learning, Big Data and the Internet of Things to the COVID-19 Pandemic: A Scientometric Review Using Text Mining.

The COVID-19 pandemic has wreaked havoc in every country in the world, with serious health-related, economic, and social consequences. Since its outbreak in March 2020, many researchers from different fields have joined forces to provide a wide range of solutions, and the support for this work from artificial intelligence (AI) and other emerging concepts linked to intelligent data analysis has been decisive. The enormous amount of research and the high number of publications during this period makes it difficult to obtain an overall view of the different applications of AI to the management of COVID-19 and an understanding of how research in this field has been evolving. Therefore, in this paper, we carry out a scientometric analysis of this area supported by text mining, including a review of 18,955 publications related to AI and COVID-19 from the Scopus database from March 2020 to June 2021 inclusive. For this purpose, we used VOSviewer software, which was developed by researchers at Leiden University in the Netherlands. This allowed us to examine the exponential growth in research on this issue and its distribution by country, and to highlight the clear hegemony of the United States (USA) and China in this respect. We used an automatic process to extract topics of research interest and observed that the most important current lines of research focused on patient-based solutions. We also identified the most relevant journals in terms of the COVID-19 pandemic, demonstrated the growing value of open-access publication, and highlighted the most influential authors by means of an analysis of citations and co-citations. This study provides an overview of the current status of research on the application of AI to the pandemic.

On the Better Performance of Pianists with Motor Imagery-Based Brain-Computer Interface Systems.

Motor imagery (MI)-based brain-computer interface (BCI) systems detect electrical brain activity patterns through electroencephalogram (EEG) signals to forecast user intention while performing movement imagination tasks. As the microscopic details of individuals' brains are directly shaped by their rich experiences, musicians can develop certain neurological characteristics, such as improved brain plasticity, following extensive musical training. Specifically, the advanced bimanual motor coordination that pianists exhibit means that they may interact more effectively with BCI systems than their non-musically trained counterparts; this could lead to personalized BCI strategies according to the users' previously detected skills. This work assessed the performance of pianists as they interacted with an MI-based BCI system and compared it with that of a control group. The Common Spatial Patterns (CSP) and Linear Discriminant Analysis (LDA) machine learning algorithms were applied to the EEG signals for feature extraction and classification, respectively. The results revealed that the pianists achieved a higher level of BCI control by means of MI during the final trial (74.69%) compared to the control group (63.13%). The outcome indicates that musical training could enhance the performance of individuals using BCI systems.

On the Possibility of Predicting Glycaemia 'On the Fly' with Constrained IoT Devices in Type 1 Diabetes Mellitus Patients.

Type 1 Diabetes Mellitus (DM1) patients are used to checking their blood glucose levels several times per day through finger sticks and, by subjectively handling this information, to try to predict their future glycaemia in order to choose a proper strategy to keep their glucose levels under control, in terms of insulin dosages and other factors. However, recent Internet of Things (IoT) devices and novel biosensors have allowed the continuous collection of the value of the glucose level by means of Continuous Glucose Monitoring (CGM) so that, with the proper Machine Learning (ML) algorithms, glucose evolution can be modeled, thus permitting a forecast of this variable. On the other hand, glycaemia dynamics require that such a model be user-centric and should be recalculated continuously in order to reflect the exact status of the patient, i.e., an 'on-the-fly' approach. In order to avoid, for example, the risk of being disconnected from the Internet, it would be ideal if this task could be performed locally in constrained devices like smartphones, but this would only be feasible if the execution times were fast enough. Therefore, in order to analyze if such a possibility is viable or not, an extensive, passive, CGM study has been carried out with 25 DM1 patients in order to build a solid dataset. Then, some well-known univariate algorithms have been executed in a desktop computer (as a reference) and two constrained devices: a smartphone and a Raspberry Pi, taking into account only past glycaemia data to forecast glucose levels. The results indicate that it is possible to forecast, in a smartphone, a 15-min horizon with a Root Mean Squared Error (RMSE) of 11.65 mg/dL in just 16.15 s, employing a 10-min sampling of the past 6 h of data and the Random Forest algorithm. With the Raspberry Pi, the computational effort increases to 56.49 s assuming the previously mentioned parameters, but this can be improved to 34.89 s if Support Vector Machines are applied, achieving in this case an RMSE of 19.90 mg/dL. Thus, this paper concludes that local on-the-fly forecasting of glycaemia would be affordable with constrained devices.

Utility of Big Data in Predicting Short-Term Blood Glucose Levels in Type 1 Diabetes Mellitus Through Machine Learning Techniques.

Machine learning techniques combined with wearable electronics can deliver accurate short-term blood glucose level prediction models. These models can learn personalized glucose-insulin dynamics based on the sensor data collected by monitoring several aspects of the physiological condition and daily activity of an individual. Until now, the prevalent approach for developing data-driven prediction models was to collect as much data as possible to help physicians and patients optimally adjust therapy. The objective of this work was to investigate the minimum data variety, volume, and velocity required to create accurate person-centric short-term prediction models. We developed a series of these models using different machine learning time series forecasting techniques suitable for execution within a wearable processor. We conducted an extensive passive patient monitoring study in real-world conditions to build an appropriate data set. The study involved a subset of type 1 diabetic subjects wearing a flash glucose monitoring system. We comparatively and quantitatively evaluated the performance of the developed data-driven prediction models and the corresponding machine learning techniques. Our results indicate that very accurate short-term prediction can be achieved by only monitoring interstitial glucose data over a very short time period and using a low sampling frequency. The models developed can predict glucose levels within a 15-min horizon with an average error as low as 15.43 mg/dL using only 24 historic values collected within a period of sex hours, and by increasing the sampling frequency to include 72 values, the average error is reduced to 10.15 mg/dL. Our prediction models are suitable for execution within a wearable device, requiring the minimum hardware requirements while at simultaneously achieving very high prediction accuracy.

Variables to Be Monitored via Biomedical Sensors for Complete Type 1 Diabetes Mellitus Management: An Extension of the "On-Board" Concept.

Type 1 diabetes mellitus (DM1) is a growing disease, and a deep understanding of the patient is required to prescribe the most appropriate treatment, adjusted to the patient's habits and characteristics. Before now, knowledge regarding each patient has been incomplete, discontinuous, and partial. However, the recent development of continuous glucose monitoring (CGM) and new biomedical sensors/gadgets, based on automatic continuous monitoring, offers a new perspective on DM1 management, since these innovative devices allow the collection of 24-hour biomedical data in addition to blood glucose levels. With this, it is possible to deeply characterize a diabetic person, offering a better understanding of his or her illness evolution, and, going further, develop new strategies to manage DM1. This new and global monitoring makes it possible to extend the "on-board" concept to other features. This well-known approach to the processing of variable "insulin" describes some inertias and aggregated/remaining effects. In this work, such analysis is carried out along with a thorough study of the significant variables to be taken into account/monitored-and how to arrange them-for a deep characterization of diabetic patients. Lastly, we present a case study evaluating the experience of the continuous and comprehensive monitoring of a diabetic patient, concluding that the huge potential of this new perspective could provide an acute insight into the patient's status and extract the maximum amount of knowledge, thus improving the DM1 management system in order to be fully functional.

Commissioning of the Controlled and Automatized Testing Facility for Human Behavior and Control (CASITA).

Human behavior is one of the most challenging aspects in the understanding of building physics. The need to evaluate it requires controlled environments and facilities in which researchers can test their methods. In this paper, we present the commissioning of the Controlled and Automatized Testing Facility for Human Behavior (CASITA). This is a controlled space emulation of an office or flat, with more than 20 environmental sensors, 5 electrical meters, and 10 actuators. Our contribution shown in this paper is the development of an infrastructure-Artificial Intelligence (AI) model pair that is perfectly integrated for the study of a variety of human energy use aspects. This facility will help to perform studies about human behavior in a controlled space. To verify this, we have tested this emulation for 60 days, in which equipment was turned on and off, the settings of the conditioning system were modified remotely, and lighting operation was similar to that in real behaviors. This period of commissioning generated 74.4 GB of raw data including high-frequency measurements. This work has shown that CASITA performs beyond expectations and that sensors and actuators could enable research on a variety of disciplines related to building physics and human behavior. Also, we have tested the PROPHET software, which was previously used in other disciplines and found that it could be an excellent complement to CASITA for experiments that require the prediction of several pertinent variables in a given study. Our contribution has also been to proof that this package is an ideal "soft" addition to the infrastructure. A case study forecasting energy consumption has been performed, concluding that the facility and the software PROPHET have a great potential for research and an outstanding accuracy.