Regular arrays of C60-based molecular rotors mounted on the surface of tris(o-phenylenedioxy)cyclotriphosphazene nanocrystals.

Dielectric spectroscopy has been used to determine the barriers of rotation of surface-mounted fullerenes (2.3 ± 0.1 and 4.3 ± 0.1 kcal mol-1). In order to achieve this, a C60 derivative equipped with an anchoring group designed to form a surface inclusion with the hexagonal form of tris(o-phenylenedioxy)cyclotriphosphazene (TPP) has been synthesized. Solid-state NMR analysis revealed that approximately 50% of the surface-mounted molecules have a chemical environment different from the others suggesting two distinct insertion modes. These observations correlate with results of DFT calculations.

Porphene and porphite as porphyrin analogs of graphene and graphite.

Two-dimensional materials have unusual properties and promise applications in nanoelectronics, spintronics, photonics, (electro)catalysis, separations, and elsewhere. Most are inorganic and their properties are difficult to tune. Here we report the preparation of Zn porphene, a member of the previously only hypothetical organic metalloporphene family. Similar to graphene, these also are fully conjugated two-dimensional polymers, but are composed of fused metalloporphyrin rings. Zn porphene is synthesized on water surface by two-dimensional oxidative polymerization of a Langmuir layer of Zn porphyrin with K2IrCl6, reminiscent of known one-dimensional polymerization of pyrroles. It is transferable to other substrates and bridges µm-sized pits. Contrary to previous theoretical predictions of metallic conductivity, it is a p-type semiconductor due to a predicted Peierls distortion of its unit cell from square to rectangular, analogous to the appearance of bond-length alternation in antiaromatic molecules. The observed reversible insertion of various metal ions, possibly carrying a fifth or sixth ligand, promises tunability and even patterning of circuits on an atomic canvas without removing any π centers from conjugation.

Regular Two-Dimensional Arrays of Surface-Mounted Molecular Switches: Switching Monitored by UV-vis and NMR Spectroscopy.

Using solid-state 15N NMR spectroscopy, the cis/trans isomerization in a two-dimensional (2-D) array of surface-mounted azobenzene-based switches was detected for the first time. In order to achieve this, a new class of rod-shaped molecular switches, suitable for formation of 2-D regular arrays on large facets of tris(o-phenylenedioxy)cyclotriphosphazene (TPP) nanocrystals, was synthesized. A mechanochemical approach was used to prepare corresponding host-guest surface inclusions in a TPP matrix. Comparison of thermal steps in solution and supramolecular surface inclusions revealed that switching of individual molecules is not compromised by the close proximity of neighbors.

Bulk Inclusions of Double Pyridazine Molecular Rotors in Hexagonal Tris( o-phenylene)cyclotriphosphazene.

A new generation of double pyridazine molecular rotors differing in intramolecular dipole-dipole spacing was synthesized. All rotor molecules formed bulk inclusions in a tris( o-phenylenedioxy)cyclotriphosphazene (TPP) host. Results of dielectric spectroscopy were fitted to a pair of nine-state models that accounted for interactions of neighboring dipoles at either an aligned or opposed possible orientation of the local threefold dipole rotation potentials within a channel of the TPP host. The results indicate dipole-dipole interaction strengths at the 100 to 200 K scale that lead dipoles to preferentially populate a subset of low-energy configurations. They also reveal that pyridazines with ethynyl substituents in 3- and 6-positions have slightly higher rotational barriers (3.2-3.5 kcal/mol) than those carrying one ethynyl and one tert-butyl group (1.9-3.0 kcal/mol). Upon cooling, these barriers reduce the rate of thermal transitions between the potential wells so much that the inclusions cannot achieve ordered dipolar ground states.

An optical Bragg scattering readout for simultaneous detection of all low-order mechanical modes of gallium nitride nanowires in nanowire arrays.

We report the use of optical Bragg scattering and homodyne interferometry to simultaneously measure all the first order cantilever-mode mechanical resonance frequencies and quality factors (Q) of gallium nitride nanowires (GaN NWs) in 100 NW periodic selected-area growth arrays. Hexagonal 2D arrays of 100 GaN NWs with pitch spacings of 350-1100 nm were designed and prepared to allow optical Bragg scattering. The NWs studied have diameters ranging from 100-300 nm, lengths from 3-10 µm, resonance frequencies between 1-10 MHz, and Q-values near 10,000 at 300 K. The system can passively detect the thermally induced Brownian mechanical motion of the NWs and can study driven NW motion, enabling the simultaneous monitoring of hundreds of mechanical resonators in a 10-100 µm2 area with a single optical beam. The read-out system allows large arrays of NWs to be characterized and applied as e.g. spatially resolved temperature and mass sensors.

Surface Inclusion of Unidirectional Molecular Motors in Hexagonal Tris(o-phenylene)cyclotriphosphazene.

A new unidirectional light-driven molecular motor suitable for host-guest surface inclusion complexes with tris(o-phenylene)cyclotriphosphazene (TPP) was synthesized. The motor molecules formed regular two-dimensional trigonal arrays covering the large facets of disc-shaped TPP nanocrystals. Photochemical and thermal isomerization studies demonstrated that the light-driven rotation of the anchored motors is similar to that observed in solution and is not compromised neither by either the surface confinement or the density of surface coverage (50 vs 100%).

Time-Resolved Fluorescence Anisotropy of Bicyclo[1.1.1]pentane/Tolane-Based Molecular Rods Included in Tris(o-phenylenedioxy)cyclotriphosphazene (TPP).

We examine the fluorescence anisotropy of rod-shaped guests held inside the channels of tris(o-phenylenedioxy)cyclotriphosphazene (TPP) host nanocrystals, characterized by powder X-ray diffraction and solid state NMR spectroscopy. We address two issues: (i) are light polarization measurements on an aqueous colloidal solution of TPP nanocrystals meaningful, or is depolarization by scattering excessive? (ii) Can measurements of the rotational mobility of the included guests be performed at low enough loading levels to suppress depolarization by intercrystallite energy transfer? We find that meaningful measurements are possible and demonstrate that the long axis of molecular rods included in TPP channels performs negligible vibrational motion.

Arrays of Molecular Rotors with Triptycene Stoppers: Surface Inclusion in Hexagonal Tris(o-phenylenedioxy)cyclotriphosphazene.

A new generation of rod-shaped dipolar molecular rotors designed for controlled insertion into channel arrays in the surface of hexagonal tris(o-phenylenedioxy)cyclotriphosphazene (TPP) has been designed and synthesized. Triptycene is used as a stopper intended to prevent complete insertion, forcing the formation of a surface inclusion. Two widely separated (13)C NMR markers are present in the shaft for monitoring the degree of insertion. The structure of the two-dimensional rotor arrays contained in these surface inclusions was examined by solid-state NMR and X-ray powder diffraction. The NMR markers and the triptycene stopper functioned as designed, but half of the guest molecules were not inserted as deeply into the TPP channels as the other half. As a result, the dipolar rotators were distributed equally in two planes parallel to the crystal surface instead of being located in a single plane as would be required for ferroelectricity. Dielectric spectroscopy revealed rotational barriers of ∼4 kcal/mol but no ferroelectric behavior.

Arrays of dipolar molecular rotors in Tris(o-phenylenedioxy) cyclotriphosphazene.

Regular two-dimensional or three-dimensional arrays of mutually interacting dipolar molecular rotors represent a worthy synthetic objective. Their dielectric properties, including possible collective behavior, will be a sensitive function of the location of the rotors, the orientation of their axes, and the size of their dipoles. Host-guest chemistry is one possible approach to gaining fine control over these factors. We describe the progress that has been achieved in recent years using tris (o-phenylenedioxy)cyclotriphosphazene as a host and a series of rod-shaped dipolar molecular rotors as guests. Structures of both surface and bulk inclusion compounds have been established primarily by solid-state nuclear magnetic resonance (NMR) and powder X-ray diffraction (XRD) techniques. Low-temperature dielectric spectroscopy revealed rotational barriers as low as 1.5 kcal/mol, but no definitive evidence for collective behavior has been obtained so far.

Large arrays and properties of 3-terminal graphene nanoelectromechanical switches.

Large arrays of 3-terminal nanoelectromechanical graphene switches are fabricated. The switch is designed with a novel geometry that leads to low actuation voltages and improved mechanical integrity, while reducing adhesion forces, which improves the reliability of the switch. A finite element model including non-linear electromechanics is used to simulate the switching behavior and to deduce a scaling relation between the switching voltage and device dimensions.

Inclusion compound based approach to forming arrays of artificial dipolar molecular rotors: a search for optimal rotor structures.

Hexagonal tris(o-phenylenedioxy)cyclotriphosphazene (TPP) is used as ahost for organizing dipolar molecular rotor guests into regular trigonal arrays. Inclusion of molecular rotors with transversely dipolar rotators into TPP channels is followed by solid-state nuclear magnetic resonance, diifferential scanning calorimetry, X-ray diffraction, and dielectric spectroscopy. The more polar of the two rotors does not form an inclusion. The second rotor forms two different inclusions differing in crystallite size and the rotational barriers.

Inclusion compound based approach to arrays of artificial dipolar molecular rotors: bulk inclusions.

We examine the insertion of two dipolar molecular rotors as guests into a host, tris(o-phenylenedioxy)cyclotriphosphazine (TPP, 1), using differential scanning calorimetry, solid-state NMR, powder X-ray diffraction, and dielectric spectroscopy. The rotors are 1-(4'-n-pentylbiphenyl-4-yl)-12-(2,3-dichlorophenyl)-p-dicarba-closo-dodecaborane and 1,12-bis(2,3-dichlorophenyl)-p-dicarba-closo-dodecaborane. Both enter the bulk even though their nominal diameter exceeds the nominal channel diameter and although a closely related rotor, 1-n-hexadecyl-12-(2,3-dichlorophenyl)-p-dicarba-closo-dodecaborane, is known to produce a surface inclusion compound. Rotational barriers of 5.4-9.3 kcal/mol were found for the dichlorophenyl rotator contained within the TPP channel. Clearly, van der Waals diameters in themselves do not suffice to predict TPP channel entry. It is suggested that the efficacy of the p-carborane stopper is reduced by the presence of the two relatively bulky adjacent benzene rings, which help to stretch the channel, and by the axial direction of its axis, which prevents the attached rotator from contributing to the stopping action.

Inclusion compound based approach to arrays of artificial dipolar molecular rotors. A surface inclusion.

We describe an approach to regular triangular arrays of dipolar molecular rotors based on insertion of dipolar rotator carrying shafts as guests into channels of a host, tris(o-phenylenedioxy)cyclotriphosphazene (TPP). The rotor guests can either enter the bulk of the host or stay at or near the surface, if a suitable stopper is installed at the end of the shaft. Differential scanning calorimetry, solid-state NMR, and powder X-ray diffraction were used to examine the insertion of a dipolar rotor synthesized for the purpose, 1-n-hexadecyl-12-(2,3-dichlorophenyl)-p-dicarba-closo-dodecaborane, and it was found that it forms a surface inclusion compound. Rotational barriers from 1.2 to 9 kcal/mol were found by dielectric spectroscopy and were attributed to rotors inserted into the surface to different degrees, some rubbing the surface as they turn.