Transferrin-Decorated PLGA Nanoparticles Loaded with an Organoselenium Compound as an Innovative Approach to Sensitize MDR Tumor Cells: An In Vitro Study Using 2D and 3D Cell Models.

Multidrug resistance (MDR) is the main challenge in cancer treatment. In this sense, we designed transferrin (Tf)-conjugated PLGA nanoparticles (NPs) containing an organoselenium compound as an alternative to enhance the efficacy of cancer therapy and sensitize MDR tumor cells. Cytotoxicity studies were performed on different sensitive tumor cell lines and on an MDR tumor cell line, and the Tf-conjugated NPs presented significantly higher antiproliferative activity than the nontargeted counterparts in all tested cell lines. Due to the promising antitumor activity of the Tf-decorated NPs, further studies were performed using the MDR cells (NCI/ADR-RES cell line) comparatively to one sensitive cell line (HeLa). The cytotoxicity of NPs was evaluated in 3D tumor spheroids and, similarly to the results achieved in the 2D assays, the Tf-conjugated NPs were more effective at reducing the spheroid's growth. The targeted Tf-NPs were also able to inhibit tumor cell migration, presented a higher cell internalization and induced a greater number of apoptotic events in both cell lines. Therefore, these findings evidenced the advantages of Tf-decorated NPs over the nontargeted counterparts, with the Tf-conjugated NPs containing an organoselenium compound representing a promising drug delivery system to overcome MDR and enhance the efficacy of cancer therapy.

In vivo and in vitro per se effect evaluation of Polycaprolactone and Eudragit® RS100-based nanoparticles.

Biodegradable polymeric nanocapsules (NC) present incredible characteristics as drug nanocarriers that optimize drug targeting. However, However, a more detailed isolated effect of polymer-based nanoparticles as drug carriers is required. This work aimed to evaluate the per se effect of blank-NC (NC-B) with different surface characteristics both in vitro and in vivo toxicity. NC1-B (Polysorbate 80 coated poly(ɛ-caprolactone) NC), NC2-B (polyethylene glycol 6000 coated poly(ɛ-caprolactone) NC), NC3-B (chitosan-coated poly(ɛ-caprolactone) NC) and NC4-B (Eudragit® RS100 NC) were prepared by nanoprecipitation method. Formulations were characterized by particle size, zeta potential, and pH. The in vitro cytotoxicity tests against tumor cell lines were performed (HepG2 and MCF-7). Antiviral activity was evaluated by MTT in Vero cells infected with HSV-1 (KOS strain). In vivo evaluation was performed in apomorphine-induced stereotypy in Wistar rats and locomotor activity distance, head movements, and rearing behavior were measured. NC1-B, NC2-B, NC3-B, and NC4-B had a diameter under 350 nm. The pH and zeta potential of formulations varied according to their coating. For in vitro evaluation of antitumor activity and antiviral activity, one-way ANOVA showed no significant differences in cell viability. In vivo tests showed low neurological effects. In conclusion, different surface characteristics of NC-B did not demonstrate toxicity against the evaluated cell lines HepG2 and MCF-7, antiviral effect against HSV-1, and the neurological effects in a stereotyping model were low and may be attributed to the per se effect of NC-B.

Effect of corn stigma extract on physical and antioxidant properties of biodegradable and edible gelatin and corn starch films.

The development of bio-based food packaging with antioxidant properties is an important research topic and has gained prominence these days. In this study, bioactive films were developed based gelatin-corn starch (GCS) incorporated with corn stigma extract (CSE) at different concentrations (15% and 25%; w/v). In preliminary tests, the extract maintained cell viability above 90% indicating that it is safe for application as an active ingredient. Insertion of the extract did not influence the thickness of the films but caused a slight change in optical properties. Scanning electron microscopy (SEM) analysis revealed interactions between the extract's bioactive compounds with gelatin and corn starch compounds, which may have improved the mechanical properties (elongation at break, Young's modulus). The addition of 25% corn stigma extract increased the contact angle, giving the film a hydrophobic character. Furthermore, at this concentration, a 15% reduction in water vapor permeability was observed. The elaborated films showed complete biodegradability before the tenth day of the study. It can be inferred that the films with corn stigma extract have good antioxidant properties, indicating that they can be used as an ingredient for food packaging.

Overcoming MDR by Associating Doxorubicin and pH-Sensitive PLGA Nanoparticles Containing a Novel Organoselenium Compound-An In Vitro Study.

In this study, we developed PLGA nanoparticles (NPs) as an effective carrier for 5'-Se-(phenyl)-3-(amino)-thymidine (ACAT-Se), an organoselenium compound, nucleoside analogue that showed promising antitumor activity in vitro. The PLGA NPs were prepared by the nanoprecipitation method and modified with a pH-responsive lysine-based surfactant (77KL). The ACAT-Se-PLGA-77KL-NPs presented nanometric size (around 120 nm), polydispersity index values < 0.20 and negative zeta potential values. The nanoencapsulation of ACAT-Se increased its antioxidant (DPPH and ABTS assays) and antitumor activity in MCF-7 tumor cells. Hemolysis study indicated that ACAT-Se-PLGA-77KL-NPs are hemocompatible and that 77KL provided a pH-sensitive membranolytic behavior to the NPs. The NPs did not induce cytotoxic effects on the nontumor cell line 3T3, suggesting its selectivity for the tumor cells. Moreover, the in vitro antiproliferative activity of NPs was evaluated in association with the antitumor drug doxorubicin. This combination result in synergistic effect in sensitive (MCF-7) and resistant (NCI/ADR-RES) tumor cells, being especially able to successfully sensitize the MDR cells. The obtained results suggested that the proposed ACAT-Se-loaded NPs are a promising delivery system for cancer therapy, especially associated with doxorubicin.

Comparative evaluation of the hepatotoxicity, phototoxicity and photosensitizing potential of dronedarone hydrochloride and its cyclodextrin-based inclusion complexes.

In this study, the hepatotoxicity, phototoxicity and photosensitizing potential of free dronedarone (DRO) and its inclusion complexes with ß-cyclodextrin (ß-CD) and 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD), prepared by different methods, were investigated by using in vitro cell-based approaches. The results of the 3T3 NRU phototoxicity assay showed that free DRO and the CD-based inclusion complexes did not present any substantial phototoxic potential. The photosensitizing potential was assessed by using THP-1 cells and IL-8 as a biomarker, and the experimental data confirmed that both the free drug and the inclusion complexes are likely to cause skin photosensitization, as they were able to induce IL-8 release after irradiation. Nevertheless, the inclusion complexes obtained by kneading followed by spray-drying induced a lower IL-8 release and also presented a smaller stimulation index in comparison with free DRO, suggesting a reduction in the photosensitizing potential. Finally, the free drug and inclusion complexes were also tested for hepatotoxicity using HepG2 cells. Even though lower IC50 values were found for the inclusion complexes prepared by kneading followed by spray-drying, there was no significant difference, indicating that the complexation of dronedarone did not induce hepatotoxicity. Overall, the obtained data confirmed that the inclusion complexes prepared by kneading followed by spray-drying, especially those based on HP-ß-CD, appeared to be the most promising formulations and, therefore, could be encouragingly explored in the development of novel pharmaceutical dosage forms containing DRO, presumably with reduced side effects and improved safety profile.

Preparation, characterization and in vitro cytotoxicity study of dronedarone hydrochloride inclusion complexes.

Dronedarone is a new antiarrhythmic drug for the treatment of atrial fibrillation. This study investigated the complexation of dronedarone hydrochloride with ß­cyclodextrin (ß-CD) and 2­hydroxypropil­ß­CD (HP-ß-CD) using three different techniques. The complexes in the solid state were characterized by DSC, TGA, PXRD, FT-IR, SEM and 1H NMR, demonstrating the formation of the inclusion complexes and exhibiting different properties from the pure drug. Its aqueous solubility increased about 4.0-fold upon complexation with ß-CD and HP-ß-CD. The dissolution rate of the drug was notably improved in all tested physiological pH values from 1.2 to 6.8 in the presence of both cyclodextrins. Furthermore, an in vitro cytotoxic assay revealed that the inclusion complexes could reduce the cytotoxic effects of the drug on 3T3 cells. The overall results suggest that the inclusion complexes with ß-CD and HP-ß-CD may be potentially useful in the preparation of novel pharmaceutical formulations containing dronedarone hydrochloride.

Poly (ɛ-Caprolactone) Nanoparticles with pH-Responsive Behavior Improved the In Vitro Antitumor Activity of Methotrexate.

A promising approach to achieve a more efficient antitumor therapy is the conjugation of the active molecule to a nanostructured delivery system. Therefore, the main objective of this research was to prepare nanoparticles (NPs), with the polymer poly (ε-caprolactone) (PCL), as a carrier for the antitumor drug methotrexate (MTX). A pH-responsive behavior was obtained through conjugation of the amino acid-based amphiphile, 77KL, to the NP matrix. The NPs showed mean hydrodynamic diameter and drug entrapment efficiency of 178.5 nm and 20.52%, respectively. Owing to its pH-sensitivity, the PCL-NPs showed membrane-lytic behavior upon reducing the pH value of surrounding media to 5.4, which is characteristic of the endosomal compartments. The in vitro antitumor assays demonstrated that MTX-loaded PCL-NPs have higher antiproliferative activity than free drug in MCF-7 cells and, to a lesser extent, in HepG2 cells. This same behavior was also achieved at mildly acidic conditions, characteristic of the tumor microenvironment. Altogether, the results evidenced the pH-responsive properties of the designed NPs, as well as the higher in vitro cytotoxicity compared to free MTX, representing thus a promising alternative for the antitumor therapy.

Physicochemical characterization and evaluation of in vitro and in vivo toxicity of goldenberry extract nanoemulsion / Caracterização físico-química e avaliação da toxicidade in vitro e in vivo de nanoemulsão contendo extrato de goldenberry

ABSTRACT: Oil-in-water (O/W) nanoemulsion containing goldenberry extract was elaborated using a high-energy ultrasonic bath method. Physicochemical characterization of the formulation was carried out by determining pH, mean droplet diameter, polydispersity index (PDI) and zeta potential. Nanoemulsion toxicity was assessed using in vitro assays with tumor and non-tumor cell lines, and in vivo using Caenorhabditis elegans. The pH of the nanoemulsion was 3.84, the mean droplet diameter was 268 ± 7 nm, PDI 0.113 and zeta potential -13.94 mV. Results of the cytotoxicity assays employing non-tumor cells indicated that the extract associated or not with nanoemulsion maintained cell viability at different concentrations tested. In the assays using tumor lineage, it is observed that the nanoemulsion containing the extract had higher antitumor activity than the free extract. As for the in vivo tests, there was no change in the survival rate of the worms.

RESUMO: Nanoemulsão óleo/água (O/A) contendo extrato de goldenberry foi elaborada utilizando método de banho ultrassônico de alta energia. A caracterização físico-química da formulação foi realizada pela determinação do pH, diâmetro médio de gotas, índice de polidispersão (PDI) e potencial zeta. A toxicidade das nanoemulsões foi avaliada utilizando ensaios in vitro com linhas celulares tumorais e não tumorais e in vivo utilizando Caenorhabditis elegans. O pH da nanoemulsão foi de 3,84, o diâmetro médio das gotículas foi de 268 ± 7 nm, PDI 0,113 e o potencial zeta -13,94 mV. Os resultados dos ensaios de citotoxicidade empregando células não tumorais indicaram que o extrato associado ou não à nanoemulsão manteve a viabilidade celular em diferentes concentrações testadas. Nos ensaios, utilizando linhagem tumoral, observou-se que a nanoemulsão contendo o extrato apresentou maior atividade antitumoral do que o extrato livre. Quanto aos testes in vivo, não houve mudança na taxa de sobrevivência dos vermes.

Cytotoxicity and antioxidant activity of goldenberry extracts obtained with high intensity ultrasound / Citotoxicidade e atividade antioxidante de extratos de goldenberry obtidos com ultrassom de alta intensidade

ABSTRACT: The high intensity ultrasound-assisted extraction (HIU) is one of the most simple, quick and efficient techniques for the extraction of phenolic and other antioxidant compounds from plants. This is the first application of HIU for the extraction of these compounds from goldenberry fruit. The HIU and conventional extraction techniques showed similar results regarding to phenolic compounds and antioxidant capacity. However, the time required for HIU extraction (5min) was 24 times lower than conventional extraction (120min). Phenolic compounds reported were chlorogenic acid, caffeic acid and rutin. In vitro cytotoxicity assays were used for evaluation of extracts and the results showed that in a wide range of concentration, the extract maintains cell viability, thus indicating the possibility to use it as food with safety.

RESUMO: A extração assistida com ultrassom de alta intensidade (HIU) é uma das técnicas mais simples, rápidas e eficientes na extração de compostos fenólicos e antioxidantes de plantas. Este trabalho foi o primeiro a utilizar HIU na extração destes compostos presentes na fruta goldenberry. As técnicas HIU e extração convencional apresentaram resultados semelhantes com relação aos compostos fenólicos e capacidade antioxidante. Entretanto, o tempo necessário na HIU (5min) foi 24 vezes menor que na extração convencional (120min). Os compostos fenólicos encontrados foram ácido clorogênico, ácido cafeico e rutina. Ensaios de citotoxicidade in vitro foram usados para avaliação dos extratos e os resultados demonstraram que, em ampla faixa de concentração, o extrato mantém a viabilidade celular, indicando assim possível segurança para utilização em alimentos.

Preparation of mupirocin-loaded polymeric nanocapsules using essential oil of rosemary

Abstract The purpose of this study was to prepare and characterize mupirocin-loaded polymeric nanocapsules using two different oils and to develop and validate an analytical method for quantitative determination by high performance liquid chromatography. The mean size of the nanoparticles was 233.05 nm and 275.03 nm for nanocapsules with a rosemary oil like oily core and caprylic/capric triglyceride, respectively, and a good polydispersity index below 0.25 for both formulations. The nanocapsules showed good stability when stored at 40 ºC and room temperature for 30 days. The quantitative method was performed with a mobile phase consisting of ammonium ammonium acetate (0.05 M adjusted to pH 5.0 with acetic acid) and acetonitrile 60:40 (v/v); the flow rate was 0.8 mL/min, UV detection at 230 nm. The analytical method was linear in the range of 5.0-15.0 µg/mL, specific for both oils, accurate, precise (intermediate precision RSD = 1.68% and repeatability RSD = 0.81%) and robust under the evaluated conditions. Therefore, this method can be performed for quantification of mupirocin in polymeric nanocapsules containing both oils.

Inclusion complex of amiodarone hydrochloride with cyclodextrins: preparation, characterization and dissolution rate evaluation

ABSTRACT This study aimed to improve the water solubility of amiodarone hydrochloride (AMH) via inclusion complexes with β-cyclodextrin, methyl-β-cyclodextrin and 2-hydroxypropyl-β-cyclodextrin. Inclusion complexes were developed by physical mixture, coevaporation, spray-drying and freeze-drying. Solid state analysis was performed using X-ray powder diffraction, differential scanning calorimetry and scanning electronic microscopy. Thermodynamic studies demonstrate that the inclusion complexes of drug into different cyclodextrins were an exothermic process that occurred spontaneously. Water solubility and drug dissolution rates were significantly increased after the formation of inclusion complexes with the cyclodextrins evaluated in relation to the physical mixture and pure drug. The present study provides useful information for the potential application of complexation with amiodarone HCl. This may be a good strategy for the development of solid pharmaceutical dosage forms.

Amiodarone hydrochloride: enhancement of solubility and dissolution rate by solid dispersion technique

abstract Amiodarone HCl is an antiarrhythmic agent, which has low aqueous solubility and presents absorption problems. This study aimed to develop inclusion complexes containing hydrophilic carriers PEG 1500, 4000 and 6000 by fusion and kneading methods in order to evaluate the increase in solubility and dissolution rate of amiodarone HCl. The solid dispersion and physical mixtures were characterized by X-ray diffraction, FT-IR spectra, water solubility and dissolution profiles. Both methods and carriers increased the solubility of drug, however PEG 6000 enhanced the drug solubility in solid dispersion better than other carriers. Different media were evaluated for the solubility study, including distilled water, acid buffer pH 1.2, acetate buffer pH 4.5 and phosphate buffer pH 6.8 at 37 ºC. Based on the evaluation of the results obtained in the study phase solubility carriers PEG 4000 and PEG 6000 were selected for the preparation of the physical mixture and solid dispersion. All formulations were prepared at drug-carrier ratios of 1:1 to 1:10(w/w). The results of in vitro release studies indicated that the solid dispersion technique by fusion method in proportion of 1:10 (w/w) increased significantly the dissolution rate of the drug. X-ray diffraction studies showed reduced drug crystallinity in the solid dispersions. FT-IR demonstrated interactions between the drug and polymers.

resumo Cloridrato de amiodarona é um agente antiarrítmico que possui baixa solubilidade aquosa e apresenta problemas de absorção. Este estudo teve como objetivo desenvolver complexos de inclusão contendo carreadores hidrofílicos PEG 1500, 4000 e 6000 através dos métodos de fusão e amassamento para avaliar o aumento da solubilidade e taxa de dissolução do cloridrato de amiodarona. As dispersões sólidas e misturas físicas foram caracterizadas por difração de raios-X, espectroscopia no infravermelho com transformada de Fourier, solubilidade em água e perfis de dissolução. Ambos os métodos e carreadores aumentaram a solubilidade do fármaco, no entanto o PEG 6000 aumentou a solubilidade do fármaco na dispersão sólida mais que os outros carreadores. Diferentes meios foram avaliados para o estudo de solubilidade, incluindo água destilada, tampão ácido pH 1,2, tampão acetato pH 4,5 e tampão fosfato pH 6,8. Com base na avaliação dos resultados obtidos no estudo de solubilidade de fases, os carreadores PEG 4000 e PEG 6000 foram selecionados para a preparação das misturas físicas e dispersões sólidas. Todas as formulações foram preparadas nas razões fármaco-carreador de 1:1 a 1:10 (p/p). Os resultados de liberação in vitro que a técnica de dispersão sólida pelo método de fusão na proporção 1:10 (p/p) aumentou significativamente a taxa de dissolução do fármaco. Estudos de difração de raios-X mostraram redução da cristalinidade do fármaco na dispersão sólida. Análise por espectroscopia no infravermelho mostrou interações entre o fármaco e o carreador.

Stability indicating RP-LC-PDA method for the quantitative analysis of saxagliptin in pharmaceutical dosage form / Estabilidade indicando o método de RP-LC-PDA para a análise quantitativa de saxagliptina em forma de dosagem farmacêutica

Saxagliptin is a potent and selective inhibitor of the enzyme dipeptidyl peptidase 4. It is effective in the treatment of type 2 diabetes mellitus because it stimulates the pancreas to produce insulin. In the present study, a liquid chromatography method was developed and validated to quantify the drug in tablets. This method was based on the isocratic elution of saxagliptin, using a mobile phase consisting of 0.1% phosphoric acid at pH 3.0 - methanol (70: 30, v/v) at a flow rate of 1 mL.min^-1 with UV detection at 225 nm. The chromatographic separation was achieved in 8 minutes on a Waters XBridge C18 column (250 mm x 4.6 mm, 5µm) maintained at ambient temperature. The proposed method proved to be specific and robust for the quality control of saxagliptin in pharmaceutical dosage forms, showing good linearity in the range of 15.0 - 100.0 µg.mL^-1 (r>0.999), precision (RSD<1.49%) and accuracy values between 99.42 and 101.59%. The method was found to be stability indicating and was successfully applied for the analysis of saxagliptin in tablets in a routine quality control laboratory...

A saxagliptina é uma inibidora potente e seletiva da enzima dipeptidil peptidase 4. É efetiva no tratamento do Diabete mellitus tipo 2, pois estimula a produção de insulina pelo pâncreas. No presente estudo, desenvolveu-se e validou-se método por cromatografia líquida de alta eficiência para quantificar o fármaco em comprimidos. O método foi baseado em eluição isocrática, utilizando fase móvel constituída por ácido fosfórico 0,1% pH 3,0-metanol (70 : 30, v/v), fluxo de 1,0 mL.min^-1, com detecção UV em 225 nm. A separação cromatográfica foi alcançada em 8 minutos em coluna Waters XBridge C18 (250 mm x 4,6 mm, 5 µm) mantida à temperatura ambiente. O método proposto mostrou-se específico e robusto para o controle de qualidade de saxagliptina em comprimidos, sendo linear na faixa de concentração de 15,0-100,0 µg.mL^-1 (r>0,999), preciso (RSD<1,49%) e exato, com resultados entre 99,42 e 101,59%. O método mostrou-se indicativo de estabilidade e foi aplicado com sucesso no controle de qualidade de saxagliptina em comprimidos...

Novel Pullulan-Eudragit® S100 blend microparticles for oral delivery of risedronate: formulation, in vitro evaluation and tableting of blend microparticles.

Polymer blends have been considered a promising strategy to tailor drug release. In order to achieve gastroresistance and controlled release, Pullulan, a polysaccharide, and Eudragit® S100, an enteric polymer were selected to prepare microparticles for oral delivery of risedronate, an antiresorptive drug associated with GI tract injuries. Blend microparticles were prepared by spray-drying technique at 3 Pullulan and Eudragit® S100 ratios (MP2:1, MP1:1 and MP1:2) and were characterized in terms of yield, particle size, encapsulation efficiency, morphology, moisture content, flowability and in vitro drug release profiles. Microparticles presented yields between 31 and 42%, encapsulation efficiencies close to 100%, moisture contents lower than 11%, particle size ranging from 2.9 to 4.8 µm and narrow distribution. In the gastric medium, MP1:2 showed the best gastroresistance profile. In the intestinal fluid, all samples were able to prolong drug release. MP1:2 was compressed into tablets with or without polyvinylpyrrolidone. Both tableted microparticles could be obtained with acceptable average weights, drug content close to 100%, sufficient hardness and low friability. In vitro studies showed that tablets maintained the gastroresistance observed for microparticles and were also able to prolong risedronate release. In conclusion, Pullulan/Eudragit® S100 microparticles are promising alternatives for the oral delivery of risedronate in the future.

Development and validation of a dissolution method using HPLC for diclofenac potassium in oral suspension

The present study describes the development and validation of an in vitro dissolution method for evaluation to release diclofenac potassium in oral suspension. The dissolution test was developed and validated according to international guidelines. Parameters like linearity, specificity, precision and accuracy were evaluated, as well as the influence of rotation speed and surfactant concentration on the medium. After selecting the best conditions, the method was validated using apparatus 2 (paddle), 50-rpm rotation speed, 900 mL of water with 0.3% sodium lauryl sulfate (SLS) as dissolution medium at 37.0 ± 0.5°C. Samples were analyzed using the HPLC-UV (PDA) method. The results obtained were satisfactory for the parameters evaluated. The method developed may be useful in routine quality control for pharmaceutical industries that produce oral suspensions containing diclofenac potassium.

O presente estudo descreve o desenvolvimento e validação de um método de dissolução in vitro para avaliação da liberação de diclofenaco potássico suspensão oral. O teste de dissolução foi desenvolvido e validado de acordo com as diretrizes internacionais. Parâmetros como linearidade, especificidade, precisão e exatidão foram avaliados, bem como a influência da velocidade de rotação e a concentração de tensoativono meio. Depois de selecionar as melhores condições, o método foi validado usando o aparato 2 (pás), velocidade de rotação de 50 rpm, 900 mL de água com 0,3% de lauril sulfato de sódio (LSS) como meio de dissolução a 37,0 ± 0,5 ºC. As amostras foram analisadas pelo método de CLAE-UV (PDA). Os resultados obtidos foram satisfatórios para os parâmetros avaliados. O método desenvolvido pode ser útil na rotina de controle de qualidade para as indústrias farmacêuticas que produzem suspensões orais contendo diclofenaco potássico.

A simple method for the quantification of diclofenac potassium in oral suspension by high-performance liquid chromatography with UV-detection

A rapid, simple and low cost method was developed to determine diclofenac potassium (DP) in oral suspension, using a reverse-phase column (C8, 150 mm x 4.6 mm, 5 µm), mobile phase containing methanol/buffer phosphate (70:30 v/v, pH 2.5), at a flow rate of 1.0 mL/min, isocratic method, and ultraviolet detection at 275 nm. A linear response (r = 1.0000) was observed in the range of 10.0-50.0 µg/mL. Validation parameters such as linearity, specificity, precision, accuracy and robustness were evaluated. The method presented precision (repeatability: relative standard deviation = 1.21% and intermediate precision: between-analyst = 0.85%). The specificity of the assay was evaluated by exposure of diclofenac potassium under conditions of stress such as hydrolysis, photolysis, oxidation and high temperature. The method presented accuracy values between 98.28% and 101.95%. The results demonstrate the validity of the proposed method that allows determination of diclofenac potassium in oral suspension and may be used as an alternative method for routine analysis of this product in quality control.

Desenvolveu-se método simples, de baixo custo para determinar o diclofenaco potássico (DP) em suspensão oral, usando coluna de fase reversa (C8, 150 mm x 4,6 mm, 5 µm), fase móvel contendo metanol/tampão fosfato (70:30 v/v, pH 2,5), com fluxo de 1,0 mL/min, método isocrático e detecção no ultravioleta a 275 nm. Observou-se resposta linear (r = 1,0000) na faixa de 10,0-50,0 µg/mL. Avaliaram-se parâmetros de validação, como linearidade, especificidade, precisão, exatidão e robustez. O método apresentou precisão (repetibilidade: desvio padrão relativo = 1,21% e precisão intermediária: entre analista = 0,85%). A especificidade do ensaio foi avaliada pela exposição do diclofenaco potássico a condições de estresse, tais como hidrólise, fotólise, oxidação e alta temperatura. O método apresentou valores de exatidão entre 98,28% e 101,95%. Os resultados mostram a validade do método proposto, que permite a determinação de diclofenaco potássico em suspensão oral e pode ser utilizado como alternativa para análise de rotina desse produto no controle de qualidade.

Development and validation of a stability-indicating LC method for the assay of lodenafil carbonate in tablets.

A stability-indicating liquid chromatographic method has been developed for the quantitative determination of lodenafil carbonate in tablets. The method employs a Synergi Fusion C18 column (250 × 4.6 mm, i.d., 4 µm particle size), with mobile phase consisting of a mixture of methanol-acetic acid 0.1% pH 4.0 (65:35, v/v) and UV detection at 290 nm, using a photodiode array detector. A linear response (r = 0.9999) was observed in the range of 10-80 µg/mL. The method showed good recoveries (average 100.3%) and also intra and inter-day precision (RSD < 2.0%). Validation parameters as specificity and robustness were also determined. Specificity analysis showed that no impurities or degradation products were co-eluting with the lodenafil carbonate peak. The method was found to be stability-indicating and due to its simplicity and accuracy can be applied for routine quality control analysis of lodenafil carbonate in tablets.

HPLC determination of bezafibrate in human plasma and its application to pharmacokinetics studies.

An isocratic high-performance liquid chromatographic (HPLC) method was developed and validated for the determination of bezafibrate in biological fluids. Bezafibrate was separated on a C(18) analytical column (150 x 4.6 mm i.d., 5 microm particle size) with 0.01 M phosphate buffer (pH 3.5)-acetonitrile-methanol (50:40:10) as mobile phase at a flow rate of 1.0 mL/min. The UV detector was set to 230 nm. Bezafibrate was extracted from human plasma using a simple liquid-liquid extraction with tert-butyl methyl ether. Parameters such as linearity, precision, accuracy, recovery, specificity, and stability were evaluated by method validation studies. All the parameters remained within acceptable limits. The validated procedure was linear in the concentration range of 0.2-50 microg/mL. The proposed method used for individual drug determinations is applicable for therapeutic monitoring purposes as well as for use in pharmacokinetic investigations. As an example, the practical quantification limit for bezafibrate in plasma was about 0.05 microg/mL with precision of 10.2% and accuracy of 112.6%. The method was applied in a study of the pharmacokinetics of bezafibrate in six healthy volunteers, who ingested a single oral dose of 200 mg.

Quantitation of nimesulide in human plasma by high-performance liquid chromatography with ultraviolet absorbance detection and its application to a bioequivalence study.

A rapid and simple high-performance liquid chromatography-reversed phase (HPLC-RV) method with ultraviolet detection (258 nm) was developed and validated for the quantitation of nimesulide (CAS 51803-78-2) in human plasma. After the plasma samples were extracted with 6.0 ml of dichloromethane containing the internal standard phenacetin 2 microg/ml in methanol, the analysis of the nimesulide level in the plasma samples was carried out using a reverse phase Supelcosil LC-18 (15 cm x 4.6 mm x 5 pm) column. The chromatographic separation was accomplished with an isocratic mobile phase consisting of a mixture of methanolphosphate buffer (pH 3.5; 0.01 mol/l) (55:45, v/v). The inter-assay accuracy ranged from 103.4 to 113.2%, while intra-day ranged from 105.6 to 117.5%. The inter-assay precision ranged from 11.7 to 14.6%, while intra-assay ranged from 3.2 to 9.5%. The recovery of nimesulide was determined as part of the assay validation process and was excellent. The linearity of the nimesulide curves ranged from 0.20 to 15.0 microg/ml (y = 0.3857-0.0081, r = 0.9975). Short-term stability showed that nimesulide is stable in plasma for at least 24 h at room temperature, while long-term stability studies showed that nimesulide is stable in plasma for at least 180 days when stored at -20 degrees C. This validated method was successfully applied to the bioequivalence study of nimesulide in tablets in healthy volunteers.

Cápsulas de sulfato de indinavir: desenvolvimento farmacotécnico-industrial, desenvolvimento do método de dissolução e avaliação / Indinavir sulfate capsules: pharmaceutics-technical-industrial and dissolution method development and evaluation

O sulfato de indinavir é um inibidor da protease no ciclo do vírus da imunodeficiência humana (HIV). O objetivo deste trabalho foi o desenvolvimento da formulação, desenvolvimento e avaliação da metodologia para dissolução, estudo micromerítico, transposição de escala industrial, estudo de estabilidade e estudo comparativo para cápsulas de sulfato de indinavir 500 mg (equivalente a 400 mg de indinavir). Para o desenvolvimento farmacotécnico, realizou-se uma planificação qualitativa de diluentes. As metodologias analíticas para peso médio, desintegração, umidade e uniformidade de peso, seguiram The United States Pharmacopeia 28, enquanto que a metodologia utilizada para dissolução foi desenvolvida e avaliada atendendo à Resolução RE nº 899, de 29 de maio de 2003, da Agência Nacional de Vigilância Sanitária (ANVISA). Os resultados demonstraram que a formulação selecionada correspondeu às especificações de controle físico-químico, além de apresentar viabilidade econômica. Os resultados obtidos com o desenvolvimento e avaliação do método para dissolução mostram que o método atende aos requisitos de Boas Práticas de Fabricação e Controle, pois apresentam a reprodutibilidade, a precisão, a robustez e finalmente a confiabilidade requerida para um método analítico. As cápsulas desenvolvidas de sulfato de indinavir, quando comparadas com o medicamento de referência, são equivalentes entre si, frente a diferentes parâmetros avaliados.

Indinavir sulfate is a protease inhibitor in the cycle of the human immunodeficiency virus (HIV). The purpose of this study was the development of formulation, and its evaluation methodology for dissolution, rheological study, scale transposition, stability study and comparative study for indinavir sulfate 500 mg capsules (equivalent to 400 mg of indinavir). A qualitative design of diluents has been performed for the pharmaceutics development. The analytical methodologies for medium weight, disintegration, humidity and uniformity of weight followed The United States Pharmacopeia 28, while the methodology used for dissolution was developed and evaluated in accordance with Resolution RE nº 899, as of May 29, 2003, issued by the Agência Nacional de Vigilância Sanitária [National Agency for Sanitary Surveillance] (ANVISA). The results have evidenced that the selected formulation corresponds to the specifications of physical-chemical control, besides showing its economic feasibility. The results obtained from the development and evaluation of dissolution method have evidenced that the method complies with the requirements of Good Manufacturing and Control Practices, since it shows the reproducibility, the precision, the robustness and finally the reliability required for an analytical method. The developed indinavir sulfate capsules, when compared with the reference drug, are equivalent, in the light of different evaluated parameters.