Water-Stable Upconverting Coordination Polymer Nanoparticles for Transparent Films and Anticounterfeiting Patterns with Air-Stable Upconversion.

Photon upconversion (UC) based on triplet-triplet annihilation is a very promising phenomenon with potential application in several areas, though, due to the intrinsic mechanism, the achievement of diffusion-limited solid materials with air-stable UC is still a challenge. Herein, we report UC coordination polymer nanoparticles (CPNs) combining sensitizer and emitter molecules especially designed with alkyl spacers that promote the amorphous character. Beyond the characteristic constraints of crystalline MOFs, amorphous CPNs facilitate high dye density and flexible ratio tunability. To show the universality of the approach, two types of UC-CPNs are reported, exhibiting highly photostable UC in two different visible spectral regions. Given their nanoscale, narrow size distribution, and good chemical/colloidal stability in water, the CPNs were also successfully printed as anticounterfeiting patterns and used to make highly transparent and photostable films for luminescent solar concentrators, both showing air-stable UC.

Water-Stable Carborane-Based Eu3+/Tb3+ Metal-Organic Frameworks for Tunable Time-Dependent Emission Color and Their Application in Anticounterfeiting Bar-Coding.

Luminescent lanthanide metal-organic frameworks (Ln-MOFs) have been shown to exhibit relevant optical properties of interest for practical applications, though their implementation still remains a challenge. To be suitable for practical applications, Ln-MOFs must be not only water stable but also printable, easy to prepare, and produced in high yields. Herein, we design and synthesize a series of m CB-Eu y Tb 1-y (y = 0-1) MOFs using a highly hydrophobic ligand mCBL1: 1,7-di(4-carboxyphenyl)-1,7-dicarba-closo-dodecaborane. The new materials are stable in water and at high temperature. Tunable emission from green to red, energy transfer (ET) from Tb3+ to Eu3+, and time-dependent emission of the series of mixed-metal m CB-Eu y Tb 1-y MOFs are reported. An outstanding increase in the quantum yield (QY) of 239% of mCB-Eu (20.5%) in the mixed mCB-Eu0.1Tb0.9 (69.2%) is achieved, along with an increased and tunable lifetime luminescence (from about 0.5 to 10 000 µs), all of these promoted by a highly effective ET process. The observed time-dependent emission (and color), in addition to the high QY, provides a simple method for designing high-security anticounterfeiting materials. We report a convenient method to prepare mixed-metal Eu/Tb coordination polymers (CPs) that are printable from water inks for potential applications, among which anticounterfeiting and bar-coding have been selected as a proof-of-concept.

Thermoresponsive multicolor-emissive materials based on solid lipid nanoparticles.

Despite the recent advances in the field of thermofluorochromism, the fabrication of thermoresponsive multicolor-emissive materials in a simple, low-cost and versatile manner still remains a challenge. Herein we accomplish this goal by expanding the concept of matrix-induced thermofluorochromism, where a sudden two-state variation of dyes' emission is promoted by the solid-liquid transition of a surrounding phase change material (e.g., paraffins). We demonstrate that this behavior can be transferred to the nanoscale by the synthesis of dye-loaded solid lipid nanoparticles, different types of which can then be combined into a single platform to obtain multicolor thermofluorochromism using a single type of emitter. Because of the reduced dimensions of these particles, they can be utilized to prepare transparent nanocomposites and inkjet-printed patterns showing complex thermoresponsive luminescence signals and applications ranging from smart displays to thermal sensing and high-security anti-counterfeiting.

Photoactivable Ruthenium-Based Coordination Polymer Nanoparticles for Light-Induced Chemotherapy.

Green light photoactive Ru-based coordination polymer nanoparticles (CPNs), with chemical formula [[Ru(biqbpy)]1.5(bis)](PF6)3 (biqbpy = 6,6'-bis[N-(isoquinolyl)-1-amino]-2,2'-bipyridine; bis = bis(imidazol-1-yl)-hexane), were obtained through polymerization of the trans-[Ru(biqbpy)(dmso)Cl]Cl complex (Complex 1) and bis bridging ligands. The as-synthesized CPNs (50 ± 12 nm diameter) showed high colloidal and chemical stability in physiological solutions. The axial bis(imidazole) ligands coordinated to the ruthenium center were photosubstituted by water upon light irradiation in aqueous medium to generate the aqueous substituted and active ruthenium complexes. The UV-Vis spectral variations observed for the suspension upon irradiation corroborated the photoactivation of the CPNs, while High Performance Liquid Chromatography (HPLC) of irradiated particles in physiological media allowed for the first time precisely quantifying the amount of photoreleased complex from the polymeric material. In vitro studies with A431 and A549 cancer cell lines revealed an 11-fold increased uptake for the nanoparticles compared to the monomeric complex [Ru(biqbpy)(N-methylimidazole)2](PF6)2 (Complex 2). After irradiation (520 nm, 39.3 J/cm2), the CPNs yielded up to a two-fold increase in cytotoxicity compared to the same CPNs kept in the dark, indicating a selective effect by light irradiation. Meanwhile, the absence of 1O2 production from both nanostructured and monomeric prodrugs concluded that light-induced cell death is not caused by a photodynamic effect but rather by photoactivated chemotherapy.

Encapsulation and sedimentation of nanomaterials through complex coacervation.

HYPOTHESIS: Nanoparticles removal from seawage water is a health and environmental challenge, due to the increasing use of these materials of excellent colloidal stability. Herein we hypothesize to reach this objective through complex coacervation, a straightforward, low-cost process, normally accomplished with non-toxic and biodegradable macromolecules. Highly dense polymer-rich colloidal droplets (the coacervates) obtained from a reversible charge-driven phase separation, entrap suspended nanomaterials, allowing their settling and potential recovery. EXPERIMENTS: In this work we apply this process to highly stable aqueous colloidal dispersions of different surface charge, size, type and state (solid or liquid). We systematically investigate the effects of the biopolymers excess and the nanomaterials concentration and charge on the encapsulation and sedimentation efficiency and rate. This strategy is also applied to real laboratory water-based wastes. FINDINGS: Long-lasting colloidal suspensions are succesfully destabilized through coacervate formation, which ensures high nanomaterials encapsulation efficiencies (~85%), payloads and highly tranparent supernatants (%T ~90%), within two hours. Lower polymer excess induces faster clearance and less sediments, while preserving effective nanomaterials removal. Preliminary experiments also validate the method for the clearance of real water residuals, making complex coacervation a promising scalable, low-cost and ecofriendly alternative to concentrate, separate or recover suspended micro/nanomaterials from aqueous sludges.

Shape Memory Polyurethane Microcapsules with Active Deformation.

From smart self-tightening sutures and expandable stents to morphing airplane wings, shape memory structures are increasingly present in our daily life. The lack of methods for synthesizing intricate structures from them on the micron and submicron level, however, is stopping the field from developing. In particular, the methods for the synthesis of shape memory polymers (SMPs) and structures at this scale and the effect of new geometries remain unexplored. Here, we describe the synthesis of shape memory polyurethane (PU) capsules accomplished by interfacial polymerization of emulsified droplets. The emulsified droplets contain the monomers for the hard segments, while the continuous aqueous phase contains the soft segments. A trifunctional chemical cross-linker for shape memory PU synthesis was utilized to eliminate creep and improve the recovery ratios of the final capsules. We observe an anomalous dependence of the recovery ratio with the amount of programmed strain compared to previous SMPs. We develop quantitative characterization methods and theory to show that when dealing with thin-shell objects, alternative parameters to quantify recovery ratios are needed. We show that while achieving 94-99% area recovery ratios, the linear capsule recovery ratios can be as low as 70%. This quantification method allows us to convert from observed linear aspect ratios in capsules to find out unrecovered area strain and stress. The hollow structure of the capsules grants high internal volume for some applications (e.g., drug delivery), which benefit from much higher loading of active ingredients than polymeric particles. The methods we developed for capsule synthesis and programming could be easily scaled up for larger volume applications.

Color-Tunable White-Light-Emitting Materials Based on Liquid-Filled Capsules and Thermally Responsive Dyes.

Color-tunable white-light-emitting materials are currently attracting much attention because of their potential applications in artificial lighting, sensing, and imaging. However, preparation of these systems from organic emitters is often cumbersome due to the interchromophoric interactions occurring upon solvent drying in the final solid materials, which can be hardly predicted and may lead to detrimental effects. To circumvent these obstacles, we have developed a new fabrication methodology that relies on dye encapsulation within liquid-filled capsules, thus enabling direct transfer of the luminescent properties from solution to the solid state and as such, rational design of miniaturized white-light-emitting materials. By introducing a thermally responsive chromophore into the capsules, these materials are further endowed with color tunability, which does not only allow ample modulation of the emitted color but also facilitate external fine control of the system so as to ensure precise realization of white light at the desired temperature and excitation wavelength.

Solid Materials with Tunable Reverse Photochromism.

Herein, we report a novel, straightforward, and universal strategy to achieve solid materials with highly tunable reverse photochromism. This was accomplished by means of commercially available spiropyran dyes, which can produce different types of stable merocyanine states (i.e., nonprotonated and protonated forms) displaying distinct reverse photochromic properties (i.e., colors and coloration rates). To finely control the concentration ratio of these species and, as such, tailor the optical performance of the photochromes, we exploited their differential interaction with surrounding media of distinctive nature (i.e., nonvolatile protic and aprotic polar solvents). In this way, solutions displaying different photochromic responses were prepared for individual spiropyrans without requiring chemical derivatization, an approach that can be generalized to other spiro dyes with distinct acid-base properties. To transfer this behavior to the solid state, core-shell capsules of these solutions were prepared, which were then used as ink materials for the fabrication of flexible polymeric films with unprecedented tunability of their photochromic properties that can be employed as rewritable multicolored devices.

Temperature-Controlled Switchable Photochromism in Solid Materials.

A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.