Radiomics Analysis for the Identification of Invasive Pulmonary Subsolid Nodules From Longitudinal Presurgical CT Scans.

PURPOSE: Effective identification of malignant part-solid lung nodules is crucial to eliminate risks due to therapeutic intervention or lack thereof. We aimed to develop delta radiomics and volumetric signatures, characterize changes in nodule properties over three presurgical time points, and assess the accuracy of nodule invasiveness identification when combined with immediate presurgical time point radiomics signature and clinical biomarkers. MATERIALS AND METHODS: Cohort included 156 part-solid lung nodules with immediate presurgical CT scans and a subset of 122 nodules with scans at 3 presurgical time points. Region of interest segmentation was performed using ITK-SNAP, and feature extraction using CaPTk. Image parameter heterogeneity was mitigated at each time point using nested ComBat harmonization. For 122 nodules, delta radiomics features (ΔRAB= (RB-RA)/RA) and delta volumes (ΔVAB= (VB-VA)/VA) were computed between the time points. Principal Component Analysis was performed to construct immediate presurgical radiomics (Rs1) and delta radiomics signatures (ΔRs31+ ΔRs21+ ΔRs32). Identification of nodule pathology was performed using logistic regression on delta radiomics and immediate presurgical time point signatures, delta volumes (ΔV31+ ΔV21+ ΔV32), and clinical variable (smoking status, BMI) models (train test split (2:1)). RESULTS: In delta radiomics analysis (n= 122 nodules), the best-performing model combined immediate pre-surgical time point and delta radiomics signatures, delta volumes, and clinical factors (classification accuracy [AUC]): (77.5% [0.73]) (train); (71.6% [0.69]) (test). CONCLUSIONS: Delta radiomics and volumes can detect changes in nodule properties over time, which are predictive of nodule invasiveness. These tools could improve conventional radiologic assessment, allow for earlier intervention for aggressive nodules, and decrease unnecessary intervention-related morbidity.

Lifelike PixelPrint phantoms for assessing clinical image quality and dose reduction capabilities of a deep learning CT reconstruction algorithm.

Deep learning CT reconstruction (DLR) has become increasingly popular as a method for improving image quality and reducing radiation exposure. Due to their nonlinear nature, these algorithms result in resolution and noise performance which are object-dependent. Therefore, traditional CT phantoms, which lack realistic tissue morphology, have become inadequate for assessing clinical imaging performance. We propose to utilize 3D-printed PixelPrint phantoms, which exhibit lifelike attenuation profiles, textures, and structures, as a better tool for evaluating DLR performance. In this study, we evaluate a DLR algorithm (Precise Image (PI), Philips Healthcare) using a custom PixelPrint lung phantom and perform head-to-head comparisons between DLR, iterative reconstruction, and filtered back projection (FBP) with scans acquired at a broad range of radiation exposures (CTDIvol: 0.5, 1, 2, 4, 6, 9, 12, 15, 19, and 20 mGy). We compared the performance of each resultant image using noise, peak signal to noise ratio (PSNR), structural similarity index (SSIM), feature-based similarity index (FSIM), information theoretic-based statistic similarity measure (ISSM) and universal image quality index (UIQ). Iterative reconstruction at 9 mGy matches the image quality of FBP at 12 mGy (diagnostic reference level) for all metrics, demonstrating a dose reduction capability of 25%. Meanwhile, DLR matches the image quality of diagnostic reference level FBP images at doses between 4 - 9 mGy, demonstrating dose reduction capabilities between 25% and 67%. This study shows that DLR allows for reduced radiation dose compared to both FBP and iterative reconstruction without compromising image quality. Furthermore, PixelPrint phantoms offer more realistic testing conditions compared to traditional phantoms in the evaluation of novel CT technologies. This, in turn, promotes the translation of new technologies, such as DLR, into clinical practice.

Patient-derived PixelPrint phantoms for evaluating clinical imaging performance of a deep learning CT reconstruction algorithm.

Objective. Deep learning reconstruction (DLR) algorithms exhibit object-dependent resolution and noise performance. Thus, traditional geometric CT phantoms cannot fully capture the clinical imaging performance of DLR. This study uses a patient-derived 3D-printed PixelPrint lung phantom to evaluate a commercial DLR algorithm across a wide range of radiation dose levels.Method. The lung phantom used in this study is based on a patient chest CT scan containing ground glass opacities and was fabricated using PixelPrint 3D-printing technology. The phantom was placed inside two different size extension rings to mimic a small- and medium-sized patient and was scanned on a conventional CT scanner at exposures between 0.5 and 20 mGy. Each scan was reconstructed using filtered back projection (FBP), iterative reconstruction, and DLR at five levels of denoising. Image noise, contrast to noise ratio (CNR), root mean squared error, structural similarity index (SSIM), and multi-scale SSIM (MS SSIM) were calculated for each image.Results.DLR demonstrated superior performance compared to FBP and iterative reconstruction for all measured metrics in both phantom sizes, with better performance for more aggressive denoising levels. DLR was estimated to reduce dose by 25%-83% in the small phantom and by 50%-83% in the medium phantom without decreasing image quality for any of the metrics measured in this study. These dose reduction estimates are more conservative compared to the estimates obtained when only considering noise and CNR.Conclusion. DLR has the capability of producing diagnostic image quality at up to 83% lower radiation dose, which can improve the clinical utility and viability of lower dose CT scans. Furthermore, the PixelPrint phantom used in this study offers an improved testing environment with more realistic tissue structures compared to traditional CT phantoms, allowing for structure-based image quality evaluation beyond noise and contrast-based assessments.

State of the art: radiomics and radiomics-related artificial intelligence on the road to clinical translation.

Radiomics and artificial intelligence carry the promise of increased precision in oncologic imaging assessments due to the ability of harnessing thousands of occult digital imaging features embedded in conventional medical imaging data. While powerful, these technologies suffer from a number of sources of variability that currently impede clinical translation. In order to overcome this impediment, there is a need to control for these sources of variability through harmonization of imaging data acquisition across institutions, construction of standardized imaging protocols that maximize the acquisition of these features, harmonization of post-processing techniques, and big data resources to properly power studies for hypothesis testing. For this to be accomplished, it will be critical to have multidisciplinary and multi-institutional collaboration.

Patient-derived PixelPrint phantoms for evaluating clinical imaging performance of a deep learning CT reconstruction algorithm.

Objective: Deep learning reconstruction (DLR) algorithms exhibit object-dependent resolution and noise performance. Thus, traditional geometric CT phantoms cannot fully capture the clinical imaging performance of DLR. This study uses a patient-derived 3D-printed PixelPrint lung phantom to evaluate a commercial DLR algorithm across a wide range of radiation dose levels. Approach: The lung phantom used in this study is based on a patient chest CT scan containing ground glass opacities and was fabricated using PixelPrint 3D-printing technology. The phantom was placed inside two different sized extension rings to mimic a small and medium sized patient and was scanned on a conventional CT scanner at exposures between 0.5 and 20 mGy. Each scan was reconstructed using filtered back projection (FBP), iterative reconstruction, and DLR at five levels of denoising. Image noise, contrast to noise ratio (CNR), root mean squared error (RMSE), structural similarity index (SSIM), and multi-scale SSIM (MS SSIM) were calculated for each image. Main Results: DLR demonstrated superior performance compared to FBP and iterative reconstruction for all measured metrics in both phantom sizes, with better performance for more aggressive denoising levels. DLR was estimated to reduce dose by 25-83% in the small phantom and by 50-83% in the medium phantom without decreasing image quality for any of the metrics measured in this study. These dose reduction estimates are more conservative compared to the estimates obtained when only considering noise and CNR with a non-anatomical physics phantom. Significance: DLR has the capability of producing diagnostic image quality at up to 83% lower radiation dose which can improve the clinical utility and viability of lower dose CT scans. Furthermore, the PixelPrint phantom used in this study offers an improved testing environment with more realistic tissue structures compared to traditional CT phantoms, allowing for structure-based image quality evaluation beyond noise and contrast-based assessments.

PixelPrint: A collection of three-dimensional printed CT phantoms of different respiratory diseases.

Imaging is often a first-line method for diagnostics and treatment. Radiological workflows increasingly mine medical images for quantifiable features. Variability in device/vendor, acquisition protocol, data processing, etc., can dramatically affect quantitative measures, including radiomics. We recently developed a method (PixelPrint) for 3D-printing lifelike computed tomography (CT) lung phantoms, paving the way for future diagnostic imaging standardization. PixelPrint generates phantoms with accurate attenuation profiles and textures by directly translating clinical images into printer instructions that control density on a voxel-by-voxel basis. The present study introduces a library of 3D printed lung phantoms covering a wide range of lung diseases, including usual interstitial pneumonia with advanced fibrosis, chronic hypersensitivity pneumonitis, secondary tuberculosis, cystic fibrosis, Kaposi sarcoma, and pulmonary edema. CT images of the patient-based phantom are qualitatively comparable to original CT images, both in texture, resolution and contrast levels allowing for clear visualization of even subtle imaging abnormalities. The variety of cases chosen for printing include both benign and malignant pathology causing a variety of alveolar and advanced interstitial abnormalities, both clearly visualized on the phantoms. A comparison of regions of interest revealed differences in attenuation below 6 HU. Identical features on the patient and the phantom have a high degree of geometrical correlation, with differences smaller than the intrinsic spatial resolution of the scans. Using PixelPrint, it is possible to generate CT phantoms that accurately represent different pulmonary diseases and their characteristic imaging features.

Cardiovascular Substructure Dose and Cardiac Events following Proton- and Photon-Based Chemoradiotherapy for Non-Small Cell Lung Cancer.

Purpose: Radiation therapy (RT) plays a critical role in treating locally advanced non-small cell lung cancer but has been associated with deleterious cardiac effects. We hypothesized that RT dose to certain cardiovascular substructures may be higher among those who experience post-chemoradiation (CRT) cardiac events, and that dose to specific substructures-the great vessels, atria, ventricles, and left anterior descending coronary artery-may be lower with proton- versus photon-based RT. Methods and Materials: In this retrospective review, we selected 26 patients who experienced cardiac events after CRT for locally advanced non-small cell lung cancer and matched them to 26 patients who did not experience cardiac events after CRT. Matching was done based on RT technique (protons vs photons), age, sex, and cardiovascular comorbidity. For each patient, the whole heart and 10 cardiovascular substructures on the RT planning computerized tomography scan were manually contoured. Dosimetric comparisons were made between those who did and did not experience cardiac events and between the proton and photon groups. Results: There was no significant difference in heart or any cardiovascular substructure dose between those patients who experienced post-treatment cardiac events and those who did not (P > .05 for all). The mean heart dose in the patients receiving proton therapy was significantly lower than the mean heart dose in the patients receiving photon therapy (P = .032). The left ventricle, right ventricle, and the left anterior descending artery also had significantly lower doses (by multiple measures) when treated with protons (P = .0004, P < .0001, and P = .0002, respectively). Conclusions: Proton therapy may have a significant effect on decreasing dose to individual cardiovascular substructures compared with photon therapy. There was no significant difference in heart dose or dose to any cardiovascular substructure between patients who did and did not experience post-treatment cardiac events. Further research should be done to assess the association between cardiovascular substructure dose and post-treatment cardiac events.

Three-dimensional printing of patient-specific computed tomography lung phantoms: a reader study.

In modern clinical decision-support algorithms, heterogeneity in image characteristics due to variations in imaging systems and protocols hinders the development of reproducible quantitative measures including for feature extraction pipelines. With the help of a reader study, we investigate the ability to provide consistent ground-truth targets by using patient-specific 3D-printed lung phantoms. PixelPrint was developed for 3D-printing lifelike computed tomography (CT) lung phantoms by directly translating clinical images into printer instructions that control density on a voxel-by-voxel basis. Data sets of three COVID-19 patients served as input for 3D-printing lung phantoms. Five radiologists rated patient and phantom images for imaging characteristics and diagnostic confidence in a blinded reader study. Effect sizes of evaluating phantom as opposed to patient images were assessed using linear mixed models. Finally, PixelPrint's production reproducibility was evaluated. Images of patients and phantoms had little variation in the estimated mean (0.03-0.29, using a 1-5 scale). When comparing phantom images to patient images, effect size analysis revealed that the difference was within one-third of the inter- and intrareader variabilities. High correspondence between the four phantoms created using the same patient images was demonstrated by PixelPrint's production repeatability tests, with greater similarity scores between high-dose acquisitions of the phantoms than between clinical-dose acquisitions of a single phantom. We demonstrated PixelPrint's ability to produce lifelike CT lung phantoms reliably. These phantoms have the potential to provide ground-truth targets for validating the generalizability of inference-based decision-support algorithms between different health centers and imaging protocols and for optimizing examination protocols with realistic patient-based phantoms. Classification: CT lung phantoms, reader study.

Clinical Outcomes Associated With Pembrolizumab Monotherapy Among Adults With Diffuse Malignant Peritoneal Mesothelioma.

Importance: Diffuse malignant peritoneal mesothelioma (DMPM) represents a rare and clinically distinct entity among malignant mesotheliomas. Pembrolizumab has activity in diffuse pleural mesothelioma but limited data are available for DMPM; thus, DMPM-specific outcome data are needed. Objective: To evaluate outcomes after the initiation of pembrolizumab monotherapy in the treatment of adults with DMPM. Design, Setting, and Participants: This retrospective cohort study was conducted in 2 tertiary care academic cancer centers (University of Pennsylvania Hospital Abramson Cancer Center and Memorial Sloan Kettering Cancer Center). All patients with DMPM treated between January 1, 2015, and September 1, 2019, were retrospectively identified and followed until January 1, 2021. Statistical analysis was performed between September 2021 and February 2022. Exposures: Pembrolizumab (200 mg or 2 mg/kg every 21 days). Main Outcomes and Measures: Median progression-free survival (PFS) and median overall survival (OS) were assessed using Kaplan-Meier estimates. The best overall response was determined using RECIST (Response Evaluation Criteria in Solid Tumors) criteria, version 1.1. The association of disease characteristics with partial response was evaluated using the Fisher exact test. Results: This study included 24 patients with DMPM who received pembrolizumab monotherapy. Patients had a median age of 62 years (IQR, 52.4-70.6 years); 14 (58.3%) were women, 18 (75.0%) had epithelioid histology, and most (19 [79.2%]) were White. A total of 23 patients (95.8%) received systemic chemotherapy prior to pembrolizumab, and the median number of lines of prior therapy was 2 (range, 0-6 lines). Of the 17 patients who underwent programmed death ligand 1 (PD-L1) testing, 6 (35.3%) had positive tumor PD-L1 expression (range, 1.0%-80.0%). Of the 19 evaluable patients, 4 (21.0%) had a partial response (overall response rate, 21.1% [95% CI, 6.1%-46.6%]), 10 (52.6%) had stable disease, and 5 (26.3%) had progressive disease (5 of 24 patients [20.8%] were lost to follow-up). There was no association between a partial response and the presence of a BAP1 alteration, PD-L1 positivity, or nonepithelioid histology. With a median follow-up of 29.2 (95% CI, 19.3 to not available [NA]) months, the median PFS was 4.9 (95% CI, 2.8-13.3) months and the median OS was 20.9 (95% CI, 10.0 to NA) months from pembrolizumab initiation. Three patients (12.5%) experienced PFS of more than 2 years. Among patients with nonepithelioid vs epithelioid histology, there was a numeric advantage in median PFS (11.5 [95% CI, 2.8 to NA] vs 4.0 [95% CI, 2.8-8.8] months) and median OS (31.8 [95% CI, 8.3 to NA] vs 17.5 [95% CI, 10.0 to NA] months); however, this did not reach statistical significance. Conclusions and Relevance: The results of this retrospective dual-center cohort study of patients with DMPM suggest that pembrolizumab had clinical activity regardless of PD-L1 status or histology, although patients with nonepithelioid histology may have experienced additional clinical benefit. The partial response rate of 21.0% and median OS of 20.9 months in this cohort with 75.0% epithelioid histology warrants further investigation to identify those most likely to respond to immunotherapy.

Considerations for Imaging of Malignant Pleural Mesothelioma: A Consensus Statement from the International Mesothelioma Interest Group.

Malignant pleural mesothelioma (MPM) is an aggressive primary malignancy of the pleura that presents unique radiologic challenges with regard to accurate and reproducible assessment of disease extent at staging and follow-up imaging. By optimizing and harmonizing technical approaches to imaging MPM, the best quality imaging can be achieved for individual patient care, clinical trials, and imaging research. This consensus statement represents agreement on harmonized, standard practices for routine multimodality imaging of MPM, including radiography, computed tomography, 18F-2-deoxy-D-glucose positron emission tomography, and magnetic resonance imaging, by an international panel of experts in the field of pleural imaging assembled by the International Mesothelioma Interest Group. In addition, modality-specific technical considerations and future directions are discussed. A bulleted summary of all technical recommendations is provided.

Resampling and harmonization for mitigation of heterogeneity in image parameters of baseline scans.

Our study investigates the effects of heterogeneity in image parameters on the reproducibility of prognostic performance of models built using radiomic biomarkers. We compare the prognostic performance of models derived from the heterogeneity-mitigated features with that of models obtained from raw features, to assess whether reproducibility of prognostic scores improves upon application of our methods. We used two datasets: The Breast I-SPY1 dataset-Baseline DCE-MRI scans of 156 women with locally advanced breast cancer, treated with neoadjuvant chemotherapy, publicly available via The Cancer Imaging Archive (TCIA); The NSCLC IO dataset-Baseline CT scans of 107 patients with stage 4 non-small cell lung cancer (NSCLC), treated with pembrolizumab immunotherapy at our institution. Radiomic features (n = 102) are extracted from the tumor ROIs. We use a variety of resampling and harmonization scenarios to mitigate the heterogeneity in image parameters. The patients were divided into groups based on batch variables. For each group, the radiomic phenotypes are combined with the clinical covariates into a prognostic model. The performance of the groups is assessed using the c-statistic, derived from a Cox proportional hazards model fitted on all patients within a group. The heterogeneity-mitigation scenario (radiomic features, derived from images that have been resampled to minimum voxel spacing, are harmonized using the image acquisition parameters as batch variables) gave models with highest prognostic scores (for e.g., IO dataset; batch variable: high kernel resolution-c-score: 0.66). The prognostic performance of patient groups is not comparable in case of models built using non-heterogeneity mitigated features (for e.g., I-SPY1 dataset; batch variable: small pixel spacing-c-score: 0.54, large pixel spacing-c-score: 0.65). The prognostic performance of patient groups is closer in case of heterogeneity-mitigated scenarios (for e.g., scenario-harmonize by voxel spacing parameters: IO dataset; thin slice-c-score: 0.62, thick slice-c-score: 0.60). Our results indicate that accounting for heterogeneity in image parameters is important to obtain more reproducible prognostic scores, irrespective of image site or modality. For non-heterogeneity mitigated models, the prognostic scores are not comparable across patient groups divided based on batch variables. This study can be a step in the direction of constructing reproducible radiomic biomarkers, thus increasing their application in clinical decision making.

A single-center retrospective cohort study of perioperative systemic chemotherapy in diffuse malignant peritoneal mesothelioma.

BACKGROUND: Diffuse malignant peritoneal mesothelioma (DMPM) is a rare variant of malignant mesothelioma, representing 10-15% of malignant mesothelioma cases. The preferred therapeutic approach is cytoreductive surgery (CRS) accompanied by hyperthermic intraperitoneal chemotherapy (HIPEC); the role of systemic chemotherapy is not well established. While some limited retrospective studies report worse outcomes with neoadjuvant chemotherapy, our institution has favored the use of neoadjuvant chemotherapy for symptom relief and surgical optimization. The aim of our study was to assess the outcomes of patients receiving neoadjuvant chemotherapy, compared to those receiving adjuvant or no perioperative chemotherapy. PATIENTS AND METHODS: We conducted a single-center retrospective cohort study of treatment-naïve, non-papillary DMPM patients seen at our institution between 1/1/2009 and 9/1/2019. We explored the effect of type of systemic therapy on clinical outcomes and estimated median overall survival (mOS) using Kaplan-Meier curves. Hazard ratios (HR) calculated by Cox proportional hazard model were used to estimate effect of the exposures on overall survival. RESULTS: 47 patients were identified with DMPM (median age at diagnosis 61.2 years, 76.6% epithelioid histology, 74.5% white race, 55.3% known asbestos exposure). CRS was performed in 53.2% of patients (25/47); 76.0% of surgical patients received HIPEC (19/25). The majority received systemic chemotherapy (37/47, 78.7%); among patients receiving both CRS and chemotherapy, neoadjuvant chemotherapy was more common than adjuvant chemotherapy (12 neoadjuvant, 8 adjuvant). Overall mOS was 84.1 months. Among neoadjuvant patients, 10/12 underwent surgery, and 2 were lost to follow-up; the majority (9/10) had clinically stable or improved disease during the pre-operative period. There were numerical more issues with chemotherapy with the adjuvant patients (4/8: 2 switches in platinum agent, 2 patients stopped therapy) than with the neoadjuvant patients (2/10: 1 switch in platinum agent, 1 delay due to peri-procedural symptoms). Neoadjuvant chemotherapy was not associated with worse mOS compared to adjuvant chemotherapy (mOS NR vs 95.1 mo, HR 0.89, 95% CI 0.18-4.5, p = 0.89). CONCLUSIONS: When used preferentially, the use of neoadjuvant chemotherapy in DMPM patients was not associated with worse outcomes compared to adjuvant chemotherapy. It was well-tolerated and did not prevent surgical intervention.

PixelPrint: Three-dimensional printing of realistic patient-specific lung phantoms for CT imaging.

Phantoms are essential tools for assessing and verifying performance in computed tomography (CT). Realistic patient-based lung phantoms that accurately represent textures and densities are essential in developing and evaluating novel CT hardware and software. This study introduces PixelPrint, a 3D-printing solution to create patient-specific lung phantoms with accurate contrast and textures. PixelPrint converts patient images directly into printer instructions, where density is modeled as the ratio of filament to voxel volume to emulate local attenuation values. For evaluation of PixelPrint, phantoms based on four COVID-19 pneumonia patients were manufactured and scanned with the original (clinical) CT scanners and protocols. Density and geometrical accuracies between phantom and patient images were evaluated for various anatomical features in the lung, and a radiomic feature comparison was performed for mild, moderate, and severe COVID-19 pneumonia patient-based phantoms. Qualitatively, CT images of the patient-based phantoms closely resemble the original CT images, both in texture and contrast levels, with clearly visible vascular and parenchymal structures. Regions-of-interest (ROIs) comparing attenuation demonstrated differences below 15 HU. Manual size measurements performed by an experienced thoracic radiologist revealed a high degree of geometrical correlation between identical patient and phantom features, with differences smaller than the intrinsic spatial resolution of the images. Radiomic feature analysis revealed high correspondence, with correlations of 0.95-0.99 between patient and phantom images. Our study demonstrates the feasibility of 3D-printed patient-based lung phantoms with accurate geometry, texture, and contrast that will enable protocol optimization, CT research and development advancements, and generation of ground-truth datasets for radiomic evaluations.

Development of a robust radiomic biomarker of progression-free survival in advanced non-small cell lung cancer patients treated with first-line immunotherapy.

We aim to determine the feasibility of a novel radiomic biomarker that can integrate with other established clinical prognostic factors to predict progression-free survival (PFS) in patients with non-small cell lung cancer (NSCLC) undergoing first-line immunotherapy. Our study includes 107 patients with stage 4 NSCLC treated with pembrolizumab-based therapy (monotherapy: 30%, combination chemotherapy: 70%). The ITK-SNAP software was used for 3D tumor volume segmentation from pre-therapy CT scans. Radiomic features (n = 102) were extracted using the CaPTk software. Impact of heterogeneity introduced by image physical dimensions (voxel spacing parameters) and acquisition parameters (contrast enhancement and CT reconstruction kernel) was mitigated by resampling the images to the minimum voxel spacing parameters and harmonization by a nested ComBat technique. This technique was initialized with radiomic features, clinical factors of age, sex, race, PD-L1 expression, ECOG status, body mass index (BMI), smoking status, recurrence event and months of progression-free survival, and image acquisition parameters as batch variables. Two phenotypes were identified using unsupervised hierarchical clustering of harmonized features. Prognostic factors, including PDL1 expression, ECOG status, BMI and smoking status, were combined with radiomic phenotypes in Cox regression models of PFS and Kaplan Meier (KM) curve-fitting. Cox model based on clinical factors had a c-statistic of 0.57, which increased to 0.63 upon addition of phenotypes derived from harmonized features. There were statistically significant differences in survival outcomes stratified by clinical covariates, as measured by the log-rank test (p = 0.034), which improved upon addition of phenotypes (p = 0.00022). We found that mitigation of heterogeneity by image resampling and nested ComBat harmonization improves prognostic value of phenotypes, resulting in better prediction of PFS when added to other prognostic variables.

CT Features of Lymphatic Plastic Bronchitis in Adults: Correlation with Multimodality Lymphatic Imaging.

Purpose: To distinguish CT patterns of lymphatic and nonlymphatic causes of plastic bronchitis (PB) through comparison with lymphatic imaging. Materials and Methods: In this retrospective study, chest CT images acquired prior to lymphatic workup were assessed in 44 patients with PB from January 2014 to August 2020. The location and extent of ground-glass opacity (GGO) was compared with symptoms and lymphatic imaging. Statistical analysis was performed using descriptive statistics, logistic regression, Pearson correlation coefficient, and unweighted κ coefficient for interobserver agreement. Sensitivity and specificity of GGO for lymphatic PB were calculated. Results: Lymphatic imaging was performed in 44 patients (median age, 52 years ± 21 [IQR]; 23 women): 35 with lymphatic PB and nine with nonlymphatic PB. GGO was more frequently observed in patients with lymphatic PB than in those with nonlymphatic PB (91% [32 of 35] vs 33% [three of nine]; P < .001). Univariate logistic regression confirmed this result by showing that GGO was a significant predictor of lymphatic PB (odds ratio, 21 (95% CI: 3.8, 159.7). The model areas under the receiver operating characteristic curve (AUCs) of GGO unadjusted and adjusted for demographics were 0.79 and 0.86, respectively. The location of GGO correlated with lymphatic imaging and bronchoscopic findings. Overall sensitivity and specificity of GGO for lymphatic PB were 91% (32 of 35; 95% CI: 76, 98) and 67% (six of nine; 95% CI: 30, 93), respectively. Conclusion: Patients with lymphatic PB predominantly had multifocal GGO with or without a "crazy paving" pattern; identification of GGO should prompt lymphatic workup in this frequently misdiagnosed condition.Keywords: Lymphography, Lymphatic, CT, Tracheobronchial Tree, Thorax© RSNA, 2022See also commentary by Kligerman and White in this issue.

Radiomic Phenotypes for Improving Early Prediction of Survival in Stage III Non-Small Cell Lung Cancer Adenocarcinoma after Chemoradiation.

We evaluate radiomic phenotypes derived from CT scans as early predictors of overall survival (OS) after chemoradiation in stage III primary lung adenocarcinoma. We retrospectively analyzed 110 thoracic CT scans acquired between April 2012-October 2018. Patients received a median radiation dose of 66.6 Gy at 1.8 Gy/fraction delivered with proton (55.5%) and photon (44.5%) beam treatment, as well as concurrent chemotherapy (89%) with carboplatin-based (55.5%) and cisplatin-based (36.4%) doublets. A total of 56 death events were recorded. Using manual tumor segmentations, 107 radiomic features were extracted. Feature harmonization using ComBat was performed to mitigate image heterogeneity due to the presence or lack of intravenous contrast material and variability in CT scanner vendors. A binary radiomic phenotype to predict OS was derived through the unsupervised hierarchical clustering of the first principal components explaining 85% of the variance of the radiomic features. C-scores and likelihood ratio tests (LRT) were used to compare the performance of a baseline Cox model based on ECOG status and age, with a model integrating the radiomic phenotype with such clinical predictors. The model integrating the radiomic phenotype (C-score = 0.69, 95% CI = (0.62, 0.77)) significantly improved (p<0.005) upon the baseline model (C-score = 0.65, CI = (0.57, 0.73)). Our results suggest that harmonized radiomic phenotypes can significantly improve OS prediction in stage III NSCLC after chemoradiation.

Three-dimensional printing of patient-specific lung phantoms for CT imaging: Emulating lung tissue with accurate attenuation profiles and textures.

PURPOSE: Phantoms are a basic tool for assessing and verifying performance in CT research and clinical practice. Patient-based realistic lung phantoms accurately representing textures and densities are essential in developing and evaluating novel CT hardware and software. This study introduces PixelPrint, a 3D printing solution to create patient-based lung phantoms with accurate attenuation profiles and textures. METHODS: PixelPrint, a software tool, was developed to convert patient digital imaging and communications in medicine (DICOM) images directly into FDM printer instructions (G-code). Density was modeled as the ratio of filament to voxel volume to emulate attenuation profiles for each voxel, with the filament ratio controlled through continuous modification of the printing speed. A calibration phantom was designed to determine the mapping between filament line width and Hounsfield units (HU) within the range of human lungs. For evaluation of PixelPrint, a phantom based on a single human lung slice was manufactured and scanned with the same CT scanner and protocol used for the patient scan. Density and geometrical accuracy between phantom and patient CT data were evaluated for various anatomical features in the lung. RESULTS: For the calibration phantom, measured mean HU show a very high level of linear correlation with respect to the utilized filament line widths, (r > 0.999). Qualitatively, the CT image of the patient-based phantom closely resembles the original CT image both in texture and contrast levels (from -800 to 0 HU), with clearly visible vascular and parenchymal structures. Regions of interest comparing attenuation illustrated differences below 15 HU. Manual size measurements performed by an experienced thoracic radiologist reveal a high degree of geometrical correlation of details between identical patient and phantom features, with differences smaller than the intrinsic spatial resolution of the scans. CONCLUSION: The present study demonstrates the feasibility of 3D-printed patient-based lung phantoms with accurate organ geometry, image texture, and attenuation profiles. PixelPrint will enable applications in the research and development of CT technology, including further development in radiomics.

Multimodality imaging of Surgicel®, an important mimic of post-operative complication in the thorax.

Absorbable hemostatic agents such as Surgicel are hemostatic materials composed of an oxidized cellulose polymer used to control post-surgical bleeding and cause coagulation. This material is sometimes purposefully left in situ where it slowly degrades over time and can produce an imaging appearance that mimics serious post-operative complications such as gangrenous infections and anastomotic leaks as well as potentially mimicking disease recurrence in later stages. In this article, we review the multimodality imaging appearance of this material in situ longitudinally in the range of post-operative settings, in order to promote awareness of this entity when interpreting post-operative imaging. We present this as a pictorial review focusing primarily but not exclusively on the chest noting that the thoracic imaging appearance of Surgicel® is less well reported in the published literature. An understanding of this entity may help to minimize erroneous diagnosis of a postoperative complication leading to unnecessary interventions.