Advanced Extraction Techniques Combined with Natural Deep Eutectic Solvents for Extracting Phenolic Compounds from Pomegranate (Punica granatum L.) Peels.

Pomegranate (Punica granatum L.) peel is a potential source of bioactive phenolic compounds such as ellagic acid and α- and ß-punicalagin. This work explores the efficiency of natural deep eutectic solvents combined with ultrasound-assisted extraction (UAE) and pressurized liquid extraction (PLE) for their extraction. Five NaDESs were evaluated by employing UAE (25 °C, for 50 min) to determine their total phenolic content (Folin-Ciocalteu assay) and ellagic acid and α- and ß-punicalagin contents (high-performance liquid chromatography (HPLC-DAD)). The NaDES composed of choline chloride (ChCl) and glycerol (Gly) (1:2, molar ratio) was the most efficient in the UAE when compared with the rest of the NaDESs and water extracts. Therefore, ChCl:Gly was further evaluated using PLE at different temperatures (40, 80, 120 and 160 °C). The PLE-NaDES extract obtained at 80 °C for 20 min at 1500 psi exhibited the highest contents of ellagic acid and α- and ß-punicalagin compared to the rest of the temperatures and PLE-water extracts obtained under the same extraction conditions. Combining UAE or PLE with a NaDES emerges as a sustainable alternative for extracting ellagic acid and α- and ß-punicalagin from pomegranate peel.

Path2Green: introducing 12 green extraction principles and a novel metric for assessing sustainability in biomass valorization.

We propose an innovative approach to address the pressing need for efficient and transparent evaluation techniques to assess extraction processes' sustainability. In response to society's growing demand for natural products and the consequent surge in biomass exploration, a critical imperative arises to ensure that these processes are genuinely environmentally friendly. Extracting natural compounds has traditionally been regarded as a benign activity rooted in ancient practices. However, contemporary extraction methods can also significantly harm the environment if not carefully managed. Recognizing this, we developed a novel metric, Path2Green, tailored specifically and rooted in 12 new principles of a green extraction process. Path2Green seeks to provide a comprehensive framework beyond conventional metrics, offering a nuanced understanding of the environmental impact of extraction activities from biomass collection/production until the end of the process. By integrating factors such as resource depletion, energy consumption, waste generation, and biodiversity preservation, Path2Green aims to offer a holistic assessment of sustainability of an extraction approach. The significance of Path2Green lies in its ability to distill complex environmental data into a simple, accessible metric. This facilitates informed decision-making for stakeholders across industries, enabling them to prioritize greener extraction practices. Moreover, by setting clear benchmarks and standards, Path2Green incentivizes innovation and drives continuous improvement in sustainability efforts, being a new user-friendly methodology.

Chemical composition and in vitro iron bioavailability of extruded and open-pan cooked germinated and ungerminated pearl whole millet "Pennisetum glaucum (L.) R. Br."

This study aimed to evaluate the effect of extrusion and of open-pan cooking on whole germinated and non-germinated grains of pearl millet (Pennisetum glaucum L. R. Br.), on its chemical-nutritional composition and in vitro iron bioavailability. The experimental design consisted of three flours: non-germination open-pan cooked millet flour (NGOPCMF), germination open-pan cooked millet flour (GOPCMF), and extrusion cooked millet flour (ECMF). The ECMF increased the carbohydrates, iron, manganese, diosmin, and cyanidin and decreased the total dietary fiber, resistant starch, lipids, and total vitamin E, in relation to NGOPCMF. The GOPCMF increased the lysine and vitamin C and decreased the phytate, lipids, total phenolic, total vitamin E, and riboflavin concentration, in relation to NGOPCMF. Furthermore, germinated cooked millet flour and extruded millet flour improved iron availability in vitro compared to non-germinated cooked millet flour. GOPCMF and ECMF generally preserved the chemical-nutritional composition of pearl millet and improved in vitro iron bioavailability; therefore, they are nutritionally equivalent and can be used to develop pearl millet-based products.

Pressurized liquid extraction assisted by high-intensity ultrasound to obtain hesperidin from lime waste: Integration of in-line purification and on-line chromatographic analysis.

Hesperidin is a phenolic compound usually found in citrus fruits, which is known for its anti-inflammatory and antioxidant properties. This bioactive compound has already been used to formulate medications to treat chronic venous insufficiency. In this work, through a system which allows the in-line coupling of the pressurized liquid extraction (PLE) and high-intensity ultrasound (HIUS) with solid phase extraction (SPE), and analysis by high-performance liquid chromatography with UV-Vis detector (HPLC-UV) in on-line mode, a method was developed to obtain, separate, and quantify hesperidin from the industrial waste of lime. An eco-friendly approach with water and ethanol as extraction solvents was used. Parameters such as temperature (80, 100, and 120 °C) and HIUS power (0, 200, and 400 W) were evaluated regarding hesperidin yield. In this context, the higher hesperidin yield (18.25 ± 1.52 mg/g) was achieved using water at a subcritical state (120 °C and 15 MPa). The adsorbent SepraTM C-18-E isolated hesperidin from the other extracted compounds employing 50% ethanol in the SPE elution. The possibility ofon-lineanalysis coupling a high-performance liquid chromatograph to an ultraviolet detector (HPLC-UV) system was studied and shown to be a feasible approach for developing integrated technologies. Conventional extractions and their antioxidant capacities were evaluated, highlighting the advantages of the HIUS-PLE-SPE extractive method. Furthermore, the on-linechromatographic analysis showed the potential of the HIUS-PLE-SPE- HPLC-UV system to quantify the extracted compounds in real time.

Pressurized liquid extraction of bioactive compounds from grape peel and application in pH-sensing carboxymethyl cellulose films: A promising material to monitor the freshness of pork and milk.

This study produced pH-sensing carboxymethyl cellulose (CMC) films functionalized with bioactive compounds obtained by pressurized liquid extraction (PLE) of grape peel to monitor the freshness of pork and milk. A semi-continuous PLE was conducted using hydroethanolic solution (70:30, v/v) at a flow rate of 5 mL/min, 15 MPa, and 60 °C. The films were produced by the casting technique using CMC (2.5 %, w/v), glycerol (1 %, v/v), and functionalized with 10, 30, and 50 % (v/v) grape peel extract. From the results obtained, LC-MS/MS revealed that PLE extracted twenty-seven phenolic compounds. The main phenolic compounds were kaempferol-3-glucoside (367.23 ± 25.88 µg/mL), prunin (270.23 ± 3.62 µg/mL), p-coumaric acid (236.43 ± 26.02 µg/mL), and procyanidin B1 (117.17 ± 7.29 µg/mL). The CMC films presented suitable color and mechanical properties for food packaging applications. The addition of grape peel extract promoted the pH-sensing property, showing the sensitivity of anthocyanins to pH changes. The films functionalized with grape peel extract presented good release control of bioactive compounds, making them suitable for food packaging applications. When applied to monitor the freshness of pork and milk, the films exhibited remarkable color changes associated with the pH of the food during storage. In conclusion, PLE is a sustainable approach to obtaining bioactive compounds from the grape peel, which can be applied in the formulation of pH-sensing films as a promising sustainable material to monitor food freshness during storage.

Simultaneous extraction, separation, and analysis of 5-caffeoylquinic acid and caffeine from coffee co-product by PLE-SPE × HPLC-PDA two-dimensional system.

This study proposed an integrated and automated procedure to extract, separate, and quantify bioactive compounds from a coffee co-product by pressurized liquid extraction (PLE) coupled inline with solid phase extraction (SPE) and online with HPLC-PDA (PLE-SPE × HPLC-PDA). The efficiency of the two-dimensional system in performing real-time analysis was verified by comparing HPLC-PDA results acquired by the system (online) and carried out after the extract fraction collection (offline). Different flow rates (1.5 mL/min for 336 min, 2 mL/min for 246.4 min, and 2.5 mL/min for 201.6 min) were evaluated to optimize the extraction, separation, and analysis method by PLE-SPE × HPLC-PDA. Subcritical water at 125 °C and 15 min of static time allowed the highest extraction yields of caffeine and 5-caffeoylquinic acid (5-CQA). Caffeine was retained during the aqueous extraction in the SPE adsorbent and eluted from the column by exchanging the solvent for a hydroethanolic mixture. Thus, caffeine was separated from 5-CQA and other phenolic compounds, producing extracts with different compositions. The solvent flow rate did not have a significant effect (p-value ≥ 0.05) on the extraction, separation, and analysis (by online and offline methods) of 5-CQA. However, the online quantification of retained compounds in the SPE (i.e., caffeine) can underestimate concentration compared to offline analysis. Nevertheless, the results suggest that coupling of advanced techniques can be used to efficiently extract, separate, and analyze fractions of phenolic compounds, supplying an integrated method to produce high-added value ingredients for several applications.

New selective and sustainable ultrasound-assisted extraction procedure to recover carnosic and rosmarinic acids from Rosmarinus officinalis by sequential use of bio-based solvents.

Carnosic (CA) and rosmarinic (RA) acids are the primary phenolic acids in hydrophilic rosemary extracts. Their combination exhibits high antioxidant activity and can be explored in several applications. This study aimed to develop an extraction procedure using bio-based solvents to recover two rosemary extracts, one rich in CA and the other in RA. By using ultrasound-assisted extraction (UAE) and a pool of 34 solvents, we evaluated nominal power (W), extraction time (min), and solvent water percentage (% H2O) regarding yield and selectivity. The authors propose a sequential UAE procedure validated by applying ethanol 99.5 % (v/v), 240 W, and 5 min to recover a rich fraction of 24.0 mgCA.gbiomass-1; followed by a second step using AmAc:LA (1:2 M ratio), 20 % H2O (m/m), 320 W, and 5 min that resulted in 8.4 mgRA.gbiomass-1. Our results indicate that modulating the solvent composition and process temperature is critical to increasing extraction yields and selectivity.

Fast and green universal method to analyze and quantify anthocyanins in natural products by UPLC-PDA.

This work developed a universal UPLC-PDA method based on safe reagents to analyze anthocyanins from different foods. Nine foods were studied by the developed chromatographic method, which was constructed using a solid core C18 column and a binary mobile phase composed of (A) water (0.25 molcitric acid.Lsolvent-1), and (B) ethanol. A total running time of 6 min was obtained, the faster comprehensive method for anthocyanins analysis. Mass spectrometry analysis was employed to identify a comprehensive set of 53 anthocyanins comprising glycosylated and acylated cyanidin, pelargonidin, malvidin, peonidin, petunidin, and delphinidin derivatives. Cyanidin-3-O-glucoside (m/z+ 449) and cyanidin-3-O-rutinoside (m/z+ 595) were used as standards to validate the accuracy of the developed method. The analytical parameters were evaluated, including intra-day and inter-day precision, robustness, repeatability, retention factor (k), resolution, and peak symmetry factor. The current method demonstrated excellent chromatographic resolution, making it a powerful tool for analyzing anthocyanins pigments.

Application of an integrative system (2D PLE×HPLC-PDA) for bioactive compound extraction and online quantification: Advantages, validation, and considerations.

Analyzing compounds such as polyphenols in solid samples frequently uses a solid-liquid extraction step. The solid-liquid extraction and analysis integration in a single equipment is not commercially available since several challenges are inherent to this hybridization. In the context of developing more sustainable analytical procedures, innovative techniques are demanded. Given that, this work proposes a new integrative system (2D PLE × HPLC-PDA) and presents its validation for bioactive compound extraction and online quantification, discussing the main advantages and cares that need to be taken. Two food byproducts - passion fruit bagasse and coffee husks - were chosen as solid model samples. The system was configured to perform pressurized liquid extraction (PLE) with periodical automated extract injection in the HPLC, consequently obtaining the online quantification of target compounds from the solid samples. In parallel with the online injections, extract fractions were collected and submitted to offline analysis in which the extraction yield of piceatannol and chlorogenic acid and caffeine were evaluated, respectively, for passion fruit bagasse and coffee husks. The extraction yields obtained by online and offline injections were compared and were significantly equal (p > 0.05). Thus, the 2D PLE × HPLC-PDA system represents a feasible tool to integrate solid sample preparation and chemical analysis of biocompounds in a single and online step.

High-intensity ultrasound-based process strategies for obtaining edible sunflower (Helianthus annuus L.) flour with low-phenolic and high-protein content.

The sunflower Helianthus annuus L. represents the 4th largest oilseed cultivated area worldwide. Its balanced amino acid content and low content of antinutrient factors give sunflower protein a good nutritional value. However, it is underexploited as a supplement to human nutrition due to the high content of phenolic compounds that reduce the sensory quality of the product. Thus, this study aimed at obtaining a high protein and low phenolic compound sunflower flour for use in the food industry by designing separation processes with high intensity ultrasound technology. First, sunflower meal, a residue of cold-press oil extraction processing, was defatted using supercritical CO2 technology. Subsequently, sunflower meal was subjected to different conditions for ultrasound-assisted extraction of phenolic compounds. The effects of solvent composition (water: ethanol) and pH (4 to 12) were investigated using different acoustic energies and continuous and pulsed process approaches. The employed process strategies reduced the oil content of sunflower meal by up to 90% and reduced 83% of the phenolic content. Furthermore, the protein content of sunflower flour was increased up to approximately 72% with respect to sunflower meal. The acoustic cavitation-based processes using the optimized solvent composition were efficient in breaking down the cellular structure of the plant matrix and facilitated the separation of proteins and phenolic compounds, while preserving the functional groups of the product. Therefore, a new ingredient with high protein content and potential application for human food was obtained from the residue of sunflower oil processing using green technologies.

Analytical quality-by-design (AQbD) approach for comprehensive analysis of bioactive compounds from Citrus peel wastes by UPLC.

The growing interest in ingredients from natural sources has expanded the need for quality assessments of plant extracts. Analytical quality-by-design (AQbD) has been increasingly applied in regulated environments such as pharmaceutical industries and, more recently, for the bioactive compounds found in botanical materials. This work aimed to obtain qualitative (overall resolution and maximum peak capacity) and quantitative performances for target analytes using AQbD principles. The analytical target profile was elaborated; critical method parameters (independent variables) that affect the critical method attributes (dependent variables) were selected from a risk assessment for a reversed-phase liquid chromatography with diode array detection (RPLC-DAD) method. YMC-Triart C18 (3.0 × 100 mm, 1.9 µm) and a gradient elution using 0.2% acetic acid and methanol:acetonitrile 1:3 (v/v) were chosen as the stationary and mobile phases, respectively. The optimal and robust conditions (temperature at 33.3 °C, flow rate of 0.68 mL.min-1, and a gradient slope of 4.18%.min-1) were established by the method operable design region (MODR). The validation was performed by accuracy profiles using 90% expectation tolerance intervals for the selected compounds found in Citrus spp. using C. japonica as blank matrix. The lower limits of quantification for hesperidin, bergapten, herniarin, and citropten were 5.32, 0.40, 0.49, and 0.52 mg.L-1, respectively (acceptance limit was set at ± 20%). Nobiletin did not show an adequate quantitative performance.

Ultra-high-performance liquid chromatography using a fused-core particle column for fast analysis of propolis phenolic compounds.

Propolis is a bee product with a complex chemical composition formed by several species from different geographical origins. The complex propolis composition requires an accurate and reproducible characterization of samples to standardize the quality of the material sold to consumers. This work developed an ultra-high-performance liquid chromatography with a photodiode array detector method to analyze propolis phenolic compounds based on the two key propolis biomarkers, Artepillin C and p-Coumaric acid. This choice was made due to the complexity of the sample with the presence of several compounds. The optimized method was hyphenated with mass spectrometry detection allowing the detection of 23 different compounds. A step-by-step strategy was used to optimize temperature, flow rate, mobile phase composition, and re-equilibration time. Reverse-phase separation was achieved with a C18 fused-core column packed with the commercially available smallest particles (1.3 nm). Using a fused-core column with ultra-high-performance liquid chromatography allows highly efficient, sensitive, accurate, and reproducible determination of compounds extracted from propolis with an outstanding sample throughput and resolution. Optimized conditions permitted the separation of the compounds in 5.50 min with a total analysis time (sample-to-sample) of 6.50 min.

Simultaneous extraction and analysis of apple pomace by gradient pressurized liquid extraction coupled in-line with solid-phase extraction and on-line with HPLC.

Due to the complex characteristics and variable composition of apple pomace, sample preparation for chromatographic analysis is a great challenge. To solve this problem, we proposed using a solvent gradient using Pressurized Liquid Extraction (PLE), where the solvent gradually changes from water to ethanol during the extraction. Different dynamic gradients, static time, and temperatures were evaluated and showed relevant effects on the yields of target analytes. It was possible to improve extraction yields of compounds with different characteristics using the extraction solvent gradient. By coupling solid-phase extraction in-line, it was possible to separate compounds into fractions, where furfural, HMF, and chlorogenic acid gradually eluted from the adsorbent. At the same time, flavonoids were retained and eluted in the later fractions. On-line analysis by HPLC provided real-time information about the process and permitted the creation of a 3D chromatogram of the sample.

Combining eutectic solvents and food-grade silica to recover and stabilize anthocyanins from grape pomace.

Concentrated in the skins of red grapes are the anthocyanins, the primary colorants responsible for the fruits' reddish-purple color. These colorants are recognized for their significant antioxidant properties and potent nutraceutical and pharmaceutical ingredients. Nevertheless, their widespread use is compromised by the (i) need for more efficient yet sustainable downstream processes for their recovery and (ii) by the challenges imposed by their poor stability. In this work, these drawbacks were overcome by applying eutectic solvents and stabilizing agents. Besides, the anthocyanins were successfully loaded into a solid host material (approved in both food and pharmaceutical sectors) based on silicon dioxide (SiO2, loading capacity: 1extract:7silica m/m). Summing up, with the process developed, the extraction yield (21 mganthocyanins.gbiomass-1) and the stability (under 55, 75, and 95 °C) of the recovered anthocyanins were over three times better than with the conventional process. Finally, the raw materials and solvents were recycled, allowing an economical and environmentally friendly downstream process.

Green Extraction Processes for Complex Samples from Vegetable Matrices Coupled with On-Line Detection System: A Critical Review.

The detection of analytes in complex organic matrices requires a series of analytical steps to obtain a reliable analysis. Sample preparation can be the most time-consuming, prolonged, and error-prone step, reducing the reliability of the investigation. This review aims to discuss the advantages and limitations of extracting bioactive compounds, sample preparation techniques, automation, and coupling with on-line detection. This review also evaluates all publications on this topic through a longitudinal bibliometric analysis, applying statistical and mathematical methods to analyze the trends, perspectives, and hot topics of this research area. Furthermore, state-of-the-art green extraction techniques for complex samples from vegetable matrices coupled with analysis systems are presented. Among the extraction techniques for liquid samples, solid-phase extraction was the most common for combined systems in the scientific literature. In contrast, for on-line extraction systems applied for solid samples, supercritical fluid extraction, ultrasound-assisted extraction, microwave-assisted extraction, and pressurized liquid extraction were the most frequent green extraction techniques.

Standardization proposal to quality control of propolis extracts commercialized in Brazil : A fingerprinting methodology using a UHPLC-PDA-MS/MS approach.

Propolis is a rich source of known and largely explored bioactive compounds with many pharmacological properties. It is used in several commercialized products, such as propolis-enriched honey, candies, mouth and throat sprays, soaps, toothpaste, and skin creams. However, the great diversity of propolis products and different types make the standardization of realistic quality control procedures challenging. Moreover, the extraction of propolis bioactive compounds depends on the technique and the solvent used. In Brazil, the Ministry of Agriculture, Livestock, and Supply (MAPA) set standards to establish commercialized propolis extracts' identity and quality. In addition, according to legislation, propolis extracts must present the main classes of phenols at 200 and 400 nm on the UV spectrum. Still, it is not specified which analysis method should be used to guarantee feasible quality control of the commercialized samples. For this, we proposed a new fast UHPLC-PDA-MS/MS method for analysis and quantification of propolis phenolic compounds. Moreover, we hypothesize that there is no efficient monitoring regarding the quality of the propolis extracts sold in Brazilian stores. Therefore, the present study aimed to perform quality control of 17 Brazilian propolis extracts produced in the Southeast region (green or brown - the most representative samples). The dry extract content (% g/mL), oxidation index (seconds), total flavonoids, and phenolics (% m/m) of each sample were compared with legislation. We conclude that using the UHPLC-PDA method and the investigation that allowed the comparison with the current legislation efficiently practical problems in the commercialization of propolis extracts. However, of the 17 analyzed samples, 6 did not meet the desired the recognized standards, denoting a lack of supervision and efficient quality control, which highlights a dangerous situation regarding the commercialization of this critical product used in several industrial fields, mainly in the food and pharmaceutical sector.

Pressurized liquid extraction coupled in-line with SPE and on-line with HPLC (PLE-SPExHPLC) for the recovery and purification of anthocyanins from SC-CO2 semi-defatted Açaí (Euterpe oleracea).

This study aimed to extract anthocyanins from dried and semi-defatted açaí pulp using green technologies based on the coupling of pressurized liquid extraction (PLE) with in-line purification through solid-phase extraction (SPE) and on-line analysis by high-performance liquid chromatography (HPLC). Critical parameters that affect the extraction efficiency and purification were investigated and optimized by response surface methodology (RSM). PLE was performed with acidified water at different pH (2.0, 4.5, and 7.0) and temperatures (40, 80, and 120 °C) at 15 MPa, 2 mL/min, and solvent-to-feed mass ratio equal to 40. SPE was optimized in a column packed with the adsorbent PoraPak™ Rxn. Different ethanol concentrations (50, 75, and 100 %) and temperatures (30, 40, and 50 °C) were evaluated for the anthocyanin's elution. The optimal conditions of the two experimental designs were determined by the RSM, firstly for PLE: 71 °C and pH 2; then using this PLE condition, the optimization of the SPE was obtained: 30 °C and 50 % ethanol. The developed PLE method provided similar anthocyanin yield to other techniques, and the coupling with SPE in-line produced an extract 5-fold more concentrated than PLE alone. Therefore, the system (PLE-SPE × HPLC-PDA) proved to be a powerful tool for monitoring the extraction process in real-time.

Insights on the Extraction and Analysis of Phenolic Compounds from Citrus Fruits: Green Perspectives and Current Status.

Citrus fruits (CF) are highly consumed worldwide, fresh, processed, or prepared as juices and pies. To illustrate the high economic importance of CF, the global production of these commodities in 2021 was around 98 million tons. CF's composition is considered an excellent source of phenolic compounds (PC) as they have a large amount and variety. Since ancient times, PC has been highlighted to promote several benefits related to oxidative stress disorders, such as chronic diseases and cancer. Recent studies suggest that consuming citrus fruits can prevent some of these diseases. However, due to the complexity of citrus matrices, extracting compounds of interest from these types of samples, and identifying and quantifying them effectively, is not a simple task. In this context, several extractive and analytical proposals have been used. This review discusses current research involving CF, focusing mainly on PC extraction and analysis methods, regarding advantages and disadvantages from the perspective of Green Chemistry.

Semi-continuous flow-through hydrothermal pretreatment for the recovery of bioproducts from jabuticaba (Myrciaria cauliflora) agro-industrial by-product.

The valorization of the by-product of the agro-industrial processing of jabuticaba (Myrciaria cauliflora) was studied by hydrothermal pretreatment. Experiments were carried out in a semi-continuous flow-through process for 45 min, at 15 MPa, a water flow rate of 5 mL min-1, and at different temperatures (60 - 210 °C). The results demonstrate that fructose and glucose were the sugars with the highest concentration in all analyzed treatments. Arabinose and cellobiose were obtained only at higher temperatures (above 130 °C), demonstrating that they were released from the hydrolysis of polysaccharides. The highest cyanidin-3-glucoside yield (1.88 mg g-1) was achieved at 60 °C. The treatments at 135 and 210 °C promoted the degradation of cyanidin-3-glucoside, leading to yields lower than 0.05 mg g-1. At 60 °C, it was possible to recover 74.18 mg g-1 of glucose, 103.77 mg g-1 of fructose, 30.75 mg g-1 of citric acid, and 1.88 mg g-1 of cyanidin-3-glucoside, without the presence of furfural and 5-hydroxymethylfurfural. The results suggest that hydrothermal pretreatment is a promising eco-friendly technology to recover sugars, organic acids, and anthocyanins from jabuticaba by-products in a circular economy framework.

Integration of pressurized liquid extraction and in-line solid-phase extraction to simultaneously extract and concentrate phenolic compounds from lemon peel (Citrus limon L.).

This work aimed to develop an integrated method to extract and fractionate phenolic compounds from lemon (Citrus limon L.) peel by in-line coupling pressurized liquid extraction and solid-phase extraction (PLE-SPE). The effect of the adsorbent used in the SPE (Sepra™ C18-E, Sepra™ NH2, and PoraPak Rxn), the combination of organic extraction-elution solvents (water-ethanol and water-ethyl lactate), extraction temperature (40-80 °C), and extraction water pH (4.0, 6.0, and 7.0) were the investigated variables. The highest yield and separation degree were observed using Sepra™ C18-E and the water-ethanol combination as the extraction solvent-eluent. Higher temperatures led to higher yields but negatively affected the retention of less polar compounds, hesperidin, and narirutin during the extraction step. The lower pH improved the yield of most evaluated compounds; however, it did not improve the adsorbent retention at high temperatures. Thus, the developed PLE-SPE method resulted in higher extraction yields from lemon peel, especially total less polar compounds (20.2100 ± 0,0050 mg/g) and hesperidin (12.8120 ± 0.0006 mg/g) and allowed the separation of polar compounds and less polar compounds in distinct extract fractions. Besides, PLE-SPE resulted in higher yields compared to other extraction methods. The integrated approach allowed obtaining extract fractions with different chemical composition through an environmentally friendly procedure. The research outcomes may be helpful for natural products chemistry, and industrial processes.