Influence of chemical interactions on the electronic properties of BiOI/organic semiconductor heterojunctions for application in solution-processed electronics.

Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its incorporation in these devices in a convenient, scalable, and economical way, BiOI thin films were investigated as part of heterojunctions with various p-type organic semiconductors (OSCs) and tested in a field-effect transistor (FET) configuration. The hybrid heterojunctions, which combine the respective functionalities of BiOI and the OSCs were processed from solution under ambient atmosphere. The characteristics of each of these hybrid systems were correlated with the physical and chemical properties of the respective materials using a concept based on heteropolar chemical interactions at the interface. Systems suitable for application in lateral transport devices were identified and it was demonstrated how materials in the hybrids interact to provide improved and synergistic properties. These indentified heterojunction FETs are a first instance of successful incorporation of solution-processed BiOI thin films in a three-terminal device. They show a significant threshold voltage shift and retained carrier mobility compared to pristine OSC devices and open up possibilities for future optoelectronic applications.

Key to High Performance Ion Hybrid Capacitor: Weakly Solvated Zinc Cations.

Zinc ion hybrid capacitors suffer from lack of reversibility and dendrite formation. An electrolyte, based on a solution of a zinc salt in acetonitrile and tetramethylene sulfone, allows smooth zinc deposition with high coulombic efficiency in a Zn||stainless steel cell (99.6% for 2880 cycles at 1.0 mA cm-2 , 1.0 mAh cm-2 ). A Zn||Zn cell operates stably for at least 7940 h at 1.0 mA cm-2 with an area capacity of 10 mAh cm-2 , or 648 h at 90% depth of discharge and 1 mA cm-2 , 9.0 mAh cm-2 . Molecular dynamics simulations reveal the reason for the excellent reversibility: The zinc cation is only weakly solvated than in pure tetramethylene sulfone with the closest atoms at 3.3 to 3.8 Å. With this electrolyte, a zinc||activated-carbon hybrid capacitor exhibits an operating voltage of 2.0 to 2.5 V, an energy-density of 135 Wh kg-1 and a power-density of 613 W kg-1 at 0.5 A g-1 . At the very high current-density of 15 A g-1 , 29.3 Wh kg-1 and 14 250 W kg-1 are achieved with 81.2% capacity retention over 9000 cycles.

Facile Synthesis of Anhydrous Rare-Earth Trichlorides from their Oxides in Chloridoaluminate Ionic Liquids.

Wide applications of anhydrous rare-earth (RE) trichlorides RECl3 in organometallic chemistry, for the synthesis of optical and magnetic materials, and as catalysts require a facile approach for their synthesis. The known methods use or produce toxic substances, are complicated and have limited reliability and upscaling. It has been shown that task-specific ionic liquids (ILs) can dissolve many metal oxides without special reaction conditions at moderate temperature, making the metals accessible to downstream chemistry. Using imidazolium chloridoaluminate ILs, pure crystalline anhydrous RECl3 (RE=La-Nd, Sm-Dy) can be synthesized in one step from RE oxides in high yield. The Lewis acidic IL acts as solvent and reaction partner. The by-product [Al4 O2 Cl10 ]2- , which was detected spectroscopically, remains in solution. The reacted IL can be removed quantitatively by washing. ILs with various imidazolium cations and AlCl3 content and the effect of temperature and reaction time were tested.

In situ Investigations of the Formation Mechanism of Metastable γ-BiPd Nanoparticles in Polyol Reductions.

Synthesizing intermetallic phases containing noble metals often poses a challenge as the melting points of noble metals often exceed the boiling point of bismuth (1560 °C). Reactions in the solid state generally circumvent this issue but are extremely time consuming. A convenient method to overcome these obstacles is the co-reduction of metal salts in polyols, which can be performed within hours at moderate temperatures and even allows access to metastable phases. However, little attention has been paid to the formation mechanisms of intermetallic particles in polyol reductions. Identifying crucial reaction parameters and finding patterns are key factors to enable targeted syntheses and product design. Here, we chose metastable γ-BiPd as an example to investigate the formation mechanism from mixtures of metal salts in ethylene glycol and to determine critical factors for phase formation. The reaction was also monitored by in situ X-ray diffraction using synchrotron radiation. Products, intermediates and solutions were characterized by (in situ) X-ray diffraction, electron microscopy, and UV-Vis spectroscopy. In the first step of the reaction, elemental palladium precipitates. Increasing temperature induces the reduction of bismuth cations and the subsequent rapid incorporation of bismuth into the palladium cores, yielding the γ-BiPd phase.

Critical Investigation of Betaine Hydrochloride-Based Deep Eutectic Solvent for Ionometallurgical Metal Production.

The applicability of a deep eutectic solvent (DES) consisting of betainium hydrochloride, urea and glycerol is examined with respect to ionometallurgical metal extraction and compared with the ionic liquid (IL) betainium bis(trifluoromethylsulfonyl)imide ([Hbet][NTf2 ]). The DES dissolves numerous metal oxides, where not only betaine and chloride act as stabilizing ligands, but also nascent ammonia seems to be essential. From such solutions, cobalt, copper, zinc, tin, lead, and even vanadium can be electrodeposited, demonstrating the feasibility of ionometallurgy. However, repeated recycling of the DES is not conceivable. NMR spectroscopy and mass spectrometry identify numerous decomposition reactions taking place at 60 °C already. The by-products that are formed not only make recycling more difficult, but also pose a toxicity problem. The opportunities and obstacles of DESs and ILs for their application in ionometallurgy are critically discussed. It is shown that a thorough understanding of the underlying chemical processes is critical.

Thiourea-Derived Single-Source Molecular Precursor For Spin-Coated PbS Thin Films.

In search of a suitable single-source precursor for the deposition of nanostructured PbS thin films at moderate temperatures under ambient conditions, we have synthesized the ligand N-(thiomorpholine-4-carbothioyl)benzamide and its corresponding lead(II) complex. The structures of both compounds were determined by single-crystal X-ray diffraction. In the complex, two ligands coordinate to a lead(II) atom in hemi-directed geometry through S and O atoms. Secondary intermolecular Pb⋅⋅⋅S interactions group the complexes into pairs. As bulk powders, both the ligand and complex show nominal composition and purity as evidenced by elemental analysis, 1 H NMR and IR spectroscopy. Thermal analysis of the lead(II) complex was carried out to understand its thermal decomposition behaviour for establishing a thin film fabrication protocol. Thin films of phase-pure PbS were fabricated using this new molecular precursor at the comparatively low annealing temperature of 250 °C. The film showed nanoparticles with cuboidal morphology and a blue-shifted optical absorption.

Cobalt Deposition from Ionothermally Dissolved Cobalt Oxides.

Owing to the environmental problems of numerous metal production processes, there is a growing need for more energy-efficient approaches. Cobalt is considered a strategic element that is extracted not only from ores but also from spent Li-ion batteries. One promising new approach is ionometallurgy, which is the extraction of metal oxides by ionic liquids (ILs). This study concerns new investigations into ionometallurgical processing of CoO, Co3 O4 , and LiCoO2 in the IL betainium bis(trifluoromethylsulfonyl)imide, [Hbet][NTf2 ]. Three crystal structures of cobalt-betaine complex compounds and combined spectroscopic and diffraction studies provide insights into the dissolution process. In addition, an optimized dissolution procedure for metal oxides is presented, avoiding the previously reported decomposition of the IL. Subsequent cobalt electrodeposition is only possible from cationic complex species, highlighting the importance of a thorough understanding of the complex equilibria. The presented method is also compared to other recently reported approaches.

Processing Gray Selenium in Phosphonium-Based Ionic Liquids.

The dissolution of gray selenium in tetraalkylphosphonium acetate ionic liquids was investigated by UV-vis, NMR, and Raman spectroscopy as well as quantum chemical calculations and electrochemical methods. Acetate anions and tetraalkylphosphonium cations facilitate the formation and stabilization of oligoselenides Sen2- and cationic Se species in the ionic liquid phase. Chemical exchange of selenium atoms was demonstrated by variable-temperature 77Se NMR experiments. Additionally, uncharged cycloselenium molecules exist at high selenium concentrations. Upon dilution with ethanol, amorphous red selenium precipitates from the solution. Moreover, crystalline Se1-xTex solid solutions precipitate when elemental tellurium is added to the mixture as confirmed by powder X-ray diffraction and Raman spectroscopy.

Unconventional Spin State Driven Spontaneous Magnetization in a Praseodymium Iron Antimonide.

Consolidating a microscopic understanding of magnetic properties is crucial for a rational design of magnetic materials with tailored characteristics. The interplay of 3d and 4f magnetism in rare-earth transition metal antimonides is an ideal platform to search for such complex behavior. Here the synthesis, crystal growth, structure, and complex magnetic properties are reported of the new compound Pr3 Fe3 Sb7 as studied by magnetization and electrical transport measurements in static and pulsed magnetic fields up to 56 T, powder neutron diffraction, and Mößbauer spectroscopy. On cooling without external magnetic field, Pr3 Fe3 Sb7 shows spontaneous magnetization, indicating a symmetry breaking without a compensating domain structure. The Fe substructure exhibits noncollinear ferromagnetic order below the Curie temperature TC  ≈ 380 K. Two spin orientations exist, which approximately align along the Fe-Fe bond directions, one parallel to the ab plane and a second one with the moments canting away from the c axis. The Pr substructure orders below 40 K, leading to a spin-reorientation transition (SRT) of the iron substructure. In low fields, the Fe and Pr magnetic moments order antiparallel to each other, which gives rise to a magnetization antiparallel to the external field. At 1.4 K, the magnetization approaches saturation above 40 T. The compound exhibits metallic resistivity along the c axis, with a small anomaly at the SRT.

Electrolyte for High-Energy- and Power-Density Zinc Batteries and Ion Capacitors.

Growth of dendrites, limited coulombic efficiency (CE), and the lack of high-voltage electrolytes restrict the commercialization of zinc batteries and capacitors. These issues are resolved by a new electrolyte, based on the zinc(II)-betaine complex [Zn(bet)2 ][NTf2 ]2 . Solutions in acetonitrile (AN) avoid dendrite formation. A Zn||Zn cell operates stably over 10 110 h (5055 cycles) at 0.2 mA cm-2 or 110 h at 50 mA cm-2 , and has an area capacity of 113 mAh cm-2 at 80% depth of discharge. A zinc-graphite battery performs at 2.6 V with a midpoint discharge-voltage of 2.4 V. The capacity-retention at 3 A g-1 (150 C) is 97% after 1000 cycles and 68% after 10 000 cycles. The charge/discharge time is about 24 s at 3.0 A g-1 with an energy density of 49 Wh kg-1 at a power density of 6864 W kg-1 based on the cathode. A zinc||activated-carbon ion-capacitor (coin cell) exhibits an operating-voltage window of 2.5 V, an energy density of 96 Wh kg-1 with a power density of 610 W kg-1 at 0.5 A g-1 . At 12 A g-1 , 36 Wh kg-1 , and 13 600 W kg-1 are achieved with 90% capacity-retention and an average CE of 96% over 10 000 cycles. Quantum-chemical methods and vibrational spectroscopy reveal [Zn(bet)2 (AN)2 ]2+ as the dominant complex in the electrolyte.

In situ investigation of the formation mechanism of α-Bi2Rh nanoparticles in polyol reductions.

The synthesis of intermetallic phases formed from elements with very different melting points is often time and energy consuming, and in extreme cases the evaporation of a reactant may even prevent formation completely. An alternative, facile synthesis approach is the reduction of metal salts in the polyol process, which requires only moderate temperatures and short reaction times. In addition, the starting materials for this procedure are readily available and do not require any special treatment to remove or prevent passivation layers, for example. Although the formation of intermetallic particles via the polyol process is an established method, little attention has been paid to the mechanism behind it. However, it is precisely a deeper understanding of the underlying mechanisms that would enable better and more targeted synthesis planning and product design. Taking the well-known formation of Bi2Rh particles from Bi(NO3)3 and various rhodium salts in ethylene glycol as an example, we studied the chemical process in detail. We investigated the effects of anion type and pH on the polyol reaction. The reaction was also probed by in situ X-ray diffraction using synchrotron radiation. Products, intermediates and solutions were characterized by X-ray and electron diffraction, electron microscopy and optical spectroscopy. In the first step, co-reduction of the metal cations leads to BiRh. Only with increasing reaction temperature, the remaining bismuth cations in the solution are reduced and incorporated into the BiRh particles, leading to a gradual transition from BiRh to α-Bi2Rh.

Crystal structure of potassium orthoselenate(IV), K2SeO3.

Crystal structure data for potassium orthoselenate(IV), K2SeO3, are reported for the first time. Colorless, block-shaped crystals were grown in a potassium hydro-flux, i.e. under ultra-alkaline conditions, within 10 h. K2SeO3 crystallizes isostructural with Na2SO3 and K2TeO3 in the trigonal space group P with lattice parameters a = 6.1063 (4) Šand c = 6.9242 (4) Šat 100 (1) K. In the trigonal-pyramidal, C 3v-symmetric [SeO3]2- anion, the bond length is 1.687 (1) Å, and the bond angle is 103.0 (1)°. Two of the three unique potassium cations exhibit a coordination number of six, and the third a coordination number of nine.

Non-innocent cyanido ligands: tetracyanidoferrate(-II) as carbonyl copycat.

While a negative oxidation state occurs rarely for metals in general, this is commonly known for metal carbonyl anions, i.e. carbonyl metalates. Although CO and CN- are isoelectronic, cyanidometalates usually do not exhibit metal centers with negative oxidation states. However, we report on the electron-rich tetrahedral tetracyanidoferrate(-II) anion [Fe(CN)4]6-, which was stabilized in (Sr3N)2[Fe(CN)4] (space group R3c, a = 702.12(2) pm, c = 4155.5(2) pm). Microcrystalline powders were synthesized by a solid-state route, single crystals were obtained from Na metal flux. In comparison to classical cyanidometalates, C-N distances are longer and stretching frequencies are lower as indicated by X-ray diffraction, IR and Raman spectroscopy. Weak C-N, strong Fe-C bonds as well as the anion geometry resemble the isoelectronic tetrahedral carbonyl ferrate [Fe(CO)4]2-. 57Fe Mössbauer spectroscopic measurements reveal a negative isomer shift in agreement with substantially delocalized d electrons due to strong π back-bonding. These results point to a very similar bonding situation of both 18e tetracyanido and tetracarbonyl ferrates including non-innocent redox-active ligands and a d10 closed shell configuration on iron. Hereby, new tetracyanidoferrate(-II) provides a missing link for a more in-depth understanding of the chemical bonding trends of highly-reduced cyanidometalates in the quest for even higher reduced transition metals in this exceptional class of compounds.

Cooperative Assembly of 2D-MOF Nanoplatelets into Hierarchical Carpets and Tubular Superstructures for Advanced Air Filtration.

Clean air is an indispensable prerequisite for human health. The capture of small toxic molecules requires the development of advanced materials for air filtration. Two-dimensional nanomaterials offer highly accessible surface areas but for real-world applications their assembly into well-defined hierarchical mesostructures is essential. DUT-134(Cu) ([Cu2 (dttc)2 ]n , dttc=dithieno[3,2-b : 2',3'-d]thiophene-2,6-dicarboxylate]) is a metal-organic framework forming platelet-shaped particles, that can be organized into complex structures, such as millimeter large free-standing layers (carpets) and tubes. The structured material demonstrates enhanced accessibility of open metal sites and significantly enhanced H2 S adsorption capacity in gas filtering tests compared with traditional bulk analogues.

A Kinetically Superior Rechargeable Zinc-Air Battery Derived from Efficient Electroseparation of Zinc, Lead, and Copper in Concentrated Solutions.

Zinc electrodeposition is currently a hot topic because of its widespread use in rechargeable zinc-air batteries. However, Zn deposition has received little attention in organic solvents with much higher ionic conductivity and current efficiency. In this study, a Zn-betaine complex is synthesized by using ZnO and betainium bis[(trifluoromethyl)sulfonyl]imide and its electrochemical behavior for six organic solvents and electrodeposited morphology are studied. Acetonitrile allowed dendrite-free Zn electrodeposition at room temperature with current efficiencies of up to 86 %. From acetonitrile solutions in which Zn, Pb, and Cu complexes are dissolved in high concentrations, Zn and Pb/Cu are efficiently separated electrolytically under potentiostatic control, allowing the purification of solutions prepared directly from natural ores. Additionally, a highly flexible Zn anode with excellent kinetics is obtained by using a carbon fabric substrate. A rechargeable zinc-air battery with these electrodes shows an open-circuit voltage of 1.63 V, is stable for at least 75 cycles at 0.5 mA cm-2 or 33 cycles at 20 mA cm-2 , and allows intermediate cycling at 100 mA cm-2 .

Exploration of metal sulfide syntheses and the dissolution process of antimony sulfide in phosphonium-based ionic liquids.

Ionic liquids (ILs), especially task-specific ILs, are capable of dissolving various solids at moderate temperatures without the need for special reaction vessels. Direct synthesis of binary sulfides of B, Bi, Ge, Mo, Cu, Au, Sn, In, Ti, V, Fe, Co, Ga, Ni, Al, Zn, and Sb in [P66614]Cl was tested at 100 °C, i.e. below the melting point of sulfur. Under these conditions, substantial sulfide formation occurred only for nickel (Ni3S4, Ni3S2, NiS) and copper (Cu2S, CuS). Sb showed no formation of crystalline sulfide, but after addition of EtOH, an orange material precipitated which was identified as amorphous metastibnite. Subsequently, the dissolution of antimony sulfide (Sb2S3), the main source of antimony production, in the phosphonium-based ILs [P66614][OAc] and [P66614]Cl at 100 °C was studied in detail. The dissolution proceeds without H2S evolution, and amorphous Sb2S3 can be precipitated from these solutions. Heating Sb2S3 in the Lewis-acidic IL [BMIm]Cl·4.7AlCl3 led to the crystallization of [Sb13S16Cl2][AlCl4]5, which contains a new quadruple heterocubane cation.

Ionothermal Synthesis of Sulfidobismuth spiro-Dicubane Cations.

Bi2 S3 was dissolved in the presence of NaCl in the ionic liquid [BMIm]Cl ⋅ 4AlCl3 (BMIm=1-n-butyl-3-methylimidazolium) through annealing the mixture at 180 °C. Upon cooling to room temperature, orange, air-sensitive crystals of Na(Bi7 S8 )[S(AlCl3 )3 ]2 [AlCl4 ]2 (1) precipitated. X-ray diffraction on single-crystals of 1 revealed a triclinic crystal structure that contains (Bi7 S8 )5+ spiro-dicubanes, [S(AlCl3 )3 ]2- tetrahedra triples, isolated [AlCl4 ]- tetrahedra, and sodium cations.

Coexistence of Tellurium Cations and Anions in Phosphonium-Based Ionic Liquids.

Elemental tellurium readily dissolves in ionic liquids (ILs) based on tetraalkylphosphonium cations even at temperatures below 100 °C. In the case of ILs with acetate, decanoate, or dicyanamide anions, dark red to purple colored solutions form. A study combining NMR, UV-Vis and Raman spectroscopy revealed the formation of tellurium anions (Ten )2- with chain lengths up to at least n=5, which are in dynamic equilibrium with each other. Since external influences could be excluded and no evidence of an ionic liquid reaction was found, disproportionation of the tellurium is the only possible dissolution mechanism. Although the spectroscopic detection of tellurium cations in these solutions is difficult, the coexistence of tellurium cations, such as (Te4 )2+ and (Te6 )4+ , and tellurium anions could be proven by cyclic voltammetry and electrodeposition experiments. DFT calculations indicate that electrostatic interactions with the ions of the ILs are sufficient to stabilize both types of tellurium ions in solution.

Formation of Bi2Ir nanoparticles in a microwave-assisted polyol process revealing the suboxide Bi4Ir2O.

Intermetallic phases are usually obtained by crystallization from the melt. However, phases containing elements with widely different melting and boiling points, as well as nanoparticles, which provide a high specific surface area, are hardly accessible via such a high-temperature process. The polyol process is one option to circumvent these obstacles by using a solution-based approach at moderate temperatures. In this study, the formation of Bi2Ir nanoparticles in a microwave-assisted polyol process was investigated. Solutions were analyzed using UV-Vis spectroscopy and the reaction was tracked with synchrotron-based in situ powder X-ray diffraction (PXRD). The products were characterized by PXRD and high-resolution transmission electron microscopy. Starting from Bi(NO3)3 and Ir(OAc)3, the new suboxide Bi4Ir2O forms as an intermediate phase at about 160 °C. Its structure was determined by a combination of PXRD and quantum-chemical calculations. Bi4Ir2O decomposes in vacuum at about 250 °C and is reduced to Bi2Ir by hydrogen at 150 °C. At about 240 °C, the polyol process leads to the immediate reduction of the two metal-containing precursors and crystallization of Bi2Ir nanoparticles.

Chalcogenides by Reduction of their Dioxides in Ultra-Alkaline Media.

The reaction of chalcogen dioxides ChO2 (Ch=Se, Te) with As2 O3 in a 30 molar KOH hydroflux at about 200 °C yielded crystals of potassium trichalcogenides K2 Ch3 with dimensions up to 2 cm. Arsenic trioxide acts as electron donor and is oxidized to arsenate(V). The new heterochalcogenide anion (TeSe2 )2- formed when starting from SeO2 and TeO2 simultaneously. The compound K2 TeSe2 crystallizes isostructural to K2 S3 and K2 Se3 . The unexpected redox reaction as well as the precipitation of hygroscopic compounds from an aqueous solution are attributed to a strongly reduced activity of water. The reactions were studied by Raman and UV/Vis spectroscopy. Depending on the concentration of As2 O3 , colorless monochalcogenide Ch2- or orange Se2 2- and purple Te2 2- anions are dominating the solutions.