What to do with an incidental finding of a fused sagittal suture: a modified Delphi study.

OBJECTIVE: As many as 5% of normocephalic children may have a prematurely fused sagittal suture, yet the clinical significance and best course of management of this finding remain unclear. Providers in the Synostosis Research Group were surveyed to create a multicenter consensus on an optimal treatment and monitoring algorithm for this condition. METHODS: A four-round modified Delphi method was utilized. The first two rounds consisted of anonymous surveys distributed to 10 neurosurgeons and 9 plastic surgeons with expertise in craniosynostosis across 9 institutions, and presented 3 patients (aged 3 years, 2 years, and 2 months) with incidentally discovered fused sagittal sutures, normal cephalic indices, and no parietal dysmorphology. Surgeons were queried about their preferred term for this entity and how best to manage these patients. Results were synthesized to create a treatment algorithm. The third and fourth feedback rounds consisted of open discussion of the algorithm until no further concerns arose. RESULTS: Most surgeons preferred the term "premature fusion of the sagittal suture" (93%). At the conclusion of the final round, all surgeons agreed to not operate on the 3- and 2-year-old patients unless symptoms of intracranial hypertension or papilledema were present. In contrast, 50% preferred to operate on the 2-month-old. However, all agreed to utilize shared decision-making, taking into account any concerns about future head shape and neurodevelopment. Panelists agreed that patients over 18 months of age without signs or symptoms suggesting elevated intracranial pressure (ICP) should not undergo surgical treatment. CONCLUSIONS: Through the Delphi method, a consensus regarding management of premature fusion of the sagittal suture was obtained from a panel of North American craniofacial surgeons. Without signs or symptoms of ICP elevation, surgery is not recommended in patients over 18 months of age. However, for children younger than 18 months, surgery should be discussed with caregivers using a shared decision-making process.

Implementation of Mandibular Distraction Osteogenesis for Patients With Pierre Robin Sequence in a Developing Country Through International Collaboration: A Paradigm for Success.

OBJECTIVE: Though it has made significant strides, Vietnam remains a resource-constrained country of 98 million people. Vietnam National Children's Hospital (VNCH) provides tertiary care to a catchment of 40 million people and is the sole national children's hospital. As such, it is one of the few referral centers in the country equipped to take care of patients diagnosed with Pierre Robin sequence (PRS) as this requires pulmonary, critical care, otolaryngology, and plastic surgery expertise. Before 2015, the only surgical options were tongue lip adhesion or tracheostomy. Only 20% of patients successfully avoided tracheostomy, mechanical ventilation, or death. From 2015 to 2019, mandibular distraction osteogenesis (MDO) was introduced by visiting international surgeons on a short-term basis. Since 2020, local surgeons at VNCH have refined their technique and widely use MDO independently. This report seeks to capitulate their experience and identify factors leading to success. METHODS: A retrospective review was conducted of patients diagnosed with PRS at VNCH from 2015 to 2022. Paper records were digitized, translated, and reviewed for inclusion criteria, including demographics, indications, hospital course, and postoperative outcomes. RESULTS: Complete records satisfying inclusion criteria were available for 53 patients with a diagnosis of PRS who underwent MDO from 2020 to 2022. From 2015 to 2019, there were 19 cases of MDO, though records were incomplete. The median age at the time of MDO was 50 ± 43 days. Forty patients (75.5%) had isolated PRS and 13 (24.5%) were syndromic. Forty-four patients (83%) had a cleft palate. Fifty-one (96.2%) of patients required preoperative supplemental oxygen or mechanical ventilation. The active distraction and consolidation phase was 4.8 ± 1.3 months. The median days to discharge after surgery was 19.0 ± 8.3 days. Median weight at birth, at the time of surgery, and at the time of device removal were 6.8 ± 1.2, 7.7 ± 1.9, and 14.8 ± 2.8 pounds, respectively. Fifty-two patients (98.1%) had obstructive sleep apnea preoperatively with an average Apnea Hypopnea Index of 25.0 ± 10.6. Post-MDO, only 4 (7.5%) had obstructive sleep apnea and the average Apnea Hypopnea Index was 5.2 ± 0.6. No patients (0) required a tracheostomy for a 100% success rate. CONCLUSIONS: The tremendous success of the implementation of MDO by local surgeons in Vietnam after its introduction by visiting international surgeons illustrates a paradigm for capacity-enhancing global surgical endeavors. Mandibular distraction osteogenesis has replaced tongue lip adhesion as the surgical treatment of choice for PRS patients at VNCH. Surgical techniques can be transferred to operating environments with basic infrastructure through collaboration and resource optimization. These results demonstrate that global surgical engagement may be scalable and repeatable with direct benefits for patients in lower-middle-income countries.

3D Printing Applications for Craniomaxillofacial Reconstruction: A Sweeping Review.

The field of craniomaxillofacial (CMF) surgery is rich in pathological diversity and broad in the ages that it treats. Moreover, the CMF skeleton is a complex confluence of sensory organs and hard and soft tissue with load-bearing demands that can change within millimeters. Computer-aided design (CAD) and additive manufacturing (AM) create extraordinary opportunities to repair the infinite array of craniomaxillofacial defects that exist because of the aforementioned circumstances. 3D printed scaffolds have the potential to serve as a comparable if not superior alternative to the "gold standard" autologous graft. In vitro and in vivo studies continue to investigate the optimal 3D printed scaffold design and composition to foster bone regeneration that is suited to the unique biological and mechanical environment of each CMF defect. Furthermore, 3D printed fixation devices serve as a patient-specific alternative to those that are available off-the-shelf with an opportunity to reduce operative time and optimize fit. Similar benefits have been found to apply to 3D printed anatomical models and surgical guides for preoperative or intraoperative use. Creation and implementation of these devices requires extensive preclinical and clinical research, novel manufacturing capabilities, and strict regulatory oversight. Researchers, manufacturers, CMF surgeons, and the United States Food and Drug Administration (FDA) are working in tandem to further the development of such technology within their respective domains, all with a mutual goal to deliver safe, effective, cost-efficient, and patient-specific CMF care. This manuscript reviews FDA regulatory status, 3D printing techniques, biomaterials, and sterilization procedures suitable for 3D printed devices of the craniomaxillofacial skeleton. It also seeks to discuss recent clinical applications, economic feasibility, and future directions of this novel technology. By reviewing the current state of 3D printing in CMF surgery, we hope to gain a better understanding of its impact and in turn identify opportunities to further the development of patient-specific surgical care.

A New Measure of Posterior Morphology in Sagittal Craniosynostosis: The Occipital Bullet Index.

INTRODUCTION: Sagittal craniosynostosis (SC) is associated with scaphocephaly, an elongated narrow head shape. Assessment of regional severity in the scaphocephalic head is limited by the use of serial computed tomographic (CT) imaging or complex computer programing. Three-dimensional measurements of cranial surface morphology provide a radiation-free alternative for assessing cranial shape. This study describes the creation of an occipital bulleting index (OBI), a novel tool using surface morphology to assess the regional severity in patients with SC. METHODS: Surface imaging from CT scans or 3D photographs of 360 individuals with SC and 221 normocephalic individuals were compared to identify differences in morphology. Cartesian grids were created on each individual's surface mesh using equidistant axial and sagittal planes. Area under the curve (AUC) analyses were performed to identify trends in regional morphology and create measures capturing population differences. RESULTS: The largest differences were located in the medial regions posteriorly. Using these population trends, a measure was created to maximize AUC. The OBI has an AUC of 0.72 with a sensitivity of 74% and a specificity of 61%. When the frontal bossing index is applied in tandem, the two have a sensitivity of 94.7% and a specificity of 93.1%. Correlation between the two scores in individuals with SC was found to be negligible with an intraclass correlation coefficient of 0.018. Severity was found to be independent of age under 24 months, sex, and imaging modality. CONCLUSIONS: This index creates a tool for differentiating control head shapes from those with SC and has the potential to allow for objective evaluation of the regional severity, outcomes of different surgical techniques, and tracking shape changes in individuals over time, without the need for radiation.

Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part I: Evolution and Optimization of 3D-Printed Scaffolds for Repair of Defects.

Bone tissue regeneration is a complex process that proceeds along the well-established wound healing pathway of hemostasis, inflammation, proliferation, and remodeling. Recently, tissue engineering efforts have focused on the application of biological and technological principles for the development of soft and hard tissue substitutes. Aim is directed towards boosting pathways of the healing process to restore form and function of tissue deficits. Continued development of synthetic scaffolds, cell therapies, and signaling biomolecules seeks to minimize the need for autografting. Despite being the current gold standard treatment, it is limited by donor sites' size and shape, as well as donor site morbidity. Since the advent of computer-aided design/computer-aided manufacturing (CAD/CAM) and additive manufacturing (AM) techniques (3D printing), bioengineering has expanded markedly while continuing to present innovative approaches to oral and craniofacial skeletal reconstruction. Prime examples include customizable, high-strength, load bearing, bioactive ceramic scaffolds. Porous macro- and micro-architecture along with the surface topography of 3D printed scaffolds favors osteoconduction and vascular in-growth, as well as the incorporation of stem and/or other osteoprogenitor cells and growth factors. This includes platelet concentrates (PCs), bone morphogenetic proteins (BMPs), and some pharmacological agents, such as dipyridamole (DIPY), an adenosine A 2A receptor indirect agonist that enhances osteogenic and osteoinductive capacity, thus improving bone formation. This two-part review commences by presenting current biological and engineering principles of bone regeneration utilized to produce 3D-printed ceramic scaffolds with the goal to create a viable alternative to autografts for craniofacial skeleton reconstruction. Part II comprehensively examines recent preclinical data to elucidate the potential clinical translation of such 3D-printed ceramic scaffolds.

Three-Dimensional Printing Bioceramic Scaffolds Using Direct-Ink-Writing for Craniomaxillofacial Bone Regeneration.

Defects characterized as large osseous voids in bone, in certain circumstances, are difficult to treat, requiring extensive treatments which lead to an increased financial burden, pain, and prolonged hospital stays. Grafts exist to aid in bone tissue regeneration (BTR), among which ceramic-based grafts have become increasingly popular due to their biocompatibility and resorbability. BTR using bioceramic materials such as ß-tricalcium phosphate has seen tremendous progress and has been extensively used in the fabrication of biomimetic scaffolds through the three-dimensional printing (3DP) workflow. 3DP has hence revolutionized BTR by offering unparalleled potential for the creation of complex, patient, and anatomic location-specific structures. More importantly, it has enabled the production of biomimetic scaffolds with porous structures that mimic the natural extracellular matrix while allowing for cell growth-a critical factor in determining the overall success of the BTR modality. While the concept of 3DP bioceramic bone tissue scaffolds for human applications is nascent, numerous studies have highlighted its potential in restoring both form and function of critically sized defects in a wide variety of translational models. In this review, we summarize these recent advancements and present a review of the engineering principles and methodologies that are vital for using 3DP technology for craniomaxillofacial reconstructive applications. Moreover, we highlight future advances in the field of dynamic 3D printed constructs via shape-memory effect, and comment on pharmacological manipulation and bioactive molecules required to treat a wider range of boney defects.

Transfacial Two-pin External Mandibular Distraction Osteogenesis: A Technique for Neonatal Airway Obstruction from Robin Sequence.

Surgical management in those with moderate-to-severe airway obstruction includes tongue-lip adhesion, tracheostomy, and/or mandibular distraction osteogenesis. This article describes a transfacial two-pin external device technique for mandibular distraction osteogenesis, utilizing minimal dissection. Methods: The first percutaneous pin is transcutaneously placed just inferior to the sigmoid notch parallel to the interpupillary line. The pin is then advanced through the pterygoid musculature at the base of the pterygoid plates, toward the contralateral ramus, and exits the skin. A second parallel pin is placed spanning the bilateral mandibular parasymphysis distal to the region of the future canine. With the pins in place, bilateral high ramus transverse corticotomies are performed. Using univector distractor devices, the length of activation varies, with the goal of overdistraction to achieve a class III relationship of the alveolar ridges. Consolidation is limited to a 1:1 period with the activation phase, and removal is performed by cutting and pulling the pins out of the face. Results: To guide optimal transcutaneous pin placement, transfacial pins were then placed through twenty segmented mandibles. Mean upper pin (UP) distance was 20.7 ± 1.1 mm from the tragus. The distance between the cutaneous entry of the UP and lower pin was 23.5 ± 0.9 mm, and the tragion-UP-lower pin angle was 118.7 ± 2.9°. Conclusions: The two-pin technique has potential advantages regarding nerve injury and mandibular growth, given an intraoral approach with limited dissection. It may safely be performed on neonates whose small size may preclude the use of internal distractor devices.

"Creation of the Scaphocephalic Index: Measurement of Global and Regional Severity in Scaphocephaly".

INTRODUCTION: The recently described frontal bossing index (FBI) and occipital bullet index (OBI) allow for quantification of scaphocephaly. A similar index examining biparietal narrowing has not been described. Addition of such an index measuring width would allow for direct evaluation of the primary growth restriction in sagittal craniosynostosis (SC) and the formation of an optimized global Width/Length measure. METHODS: CT scans and 3D photos were used to recreate scalp surface anatomy. Equidistant axial, sagittal, and coronal planes were overlaid creating a Cartesian grid. Points of intersection were analyzed for population trends in biparietal width. Using the most descriptive point coupled with the sellion's protrusion to control for head size, the vertex narrowing index (VNI) is formed. By combining this index with the FBI and OBI, the Scaphocephalic Index (SCI) is created as a tailored W/L measure. RESULTS: Using 221 control and 360 individuals with sagittal craniosynostosis, the greatest difference occurred superiorly and posteriorly at a point 70% of the head's height and 60% of the head's length. This point had an area under the curve (AUC) of 0.97 and sensitivity and specificity of 91.2% and 92.2% respectively. The SCI has an AUC of 0.9997, sensitivity and specificity >99%, and interrater reliability of 0.995. The correlation coefficients between the CT imaging and 3D photography was 0.96. CONCLUSION: The VNI, FBI, and OBI evaluate regional severity while the SCI is able to describe global morphology in patients with sagittal craniosynostosis. These allow for superior diagnosis, surgical planning, and outcome assessment, independent of radiation.

Multicenter comparison of head shape outcomes for three minimally invasive strip craniectomy techniques for sagittal craniosynostosis.

OBJECTIVE: A literature gap exists comparing whole head shape outcome following correction of sagittal craniosynostosis. The objective of this multicenter study was to provide an analysis of long-term results following three different endoscopic strip craniectomy techniques for correction of sagittal craniosynostosis: 1) spring-assisted strip craniectomy, 2) wide-strip craniectomy with biparietal and bitemporal barrel-stave wedge osteotomies plus helmet orthosis, and 3) narrow-strip craniectomy plus orthosis without barrel staves. METHODS: Pre- and postoperative 3D stereophotogrammetric images were collected from patients who underwent craniosynostosis surgery. Procedures were divided among institutions as follows: spring-assisted strip craniectomies were performed at Atrium Health Wake Forest Baptist Hospital; narrow-strip craniectomies were performed at St. Louis Children's Hospital by one craniofacial surgeon; and wide-vertex craniectomies were performed at St. Louis Children's Hospital prior to 2010, and then continued at Children's Medical Center Dallas. Pre- and postoperative 3D whole-head composite images were generated for each procedure to visually represent outcomes at final follow-up and compared with age-matched normal controls. RESULTS: Patients in the spring-assisted strip craniectomy group showed normalization of frontal bossing and skull height compared with age-matched controls, whereas patients undergoing wide-strip craniectomy showed greater correction of occipital protrusion. Patients in the narrow-strip craniectomy cohort had intermediate results between these outcomes. Nested aggregate head shapes showed good correction of head shapes from all techniques. CONCLUSIONS: This large, retrospective, multicenter study illustrated whole head shape outcomes from three different craniectomy procedures. Although each procedure showed some differences in loci of primary correction, all three surgical methods demonstrated good correction of primary scaphocephalic deformity.

The Need for Additional Surgery after Passive versus Active Approaches to Syndromic Craniosynostosis: A Meta-analysis.

Endoscopically assisted craniofacial surgery (EACS) has numerous advantages over traditional, open approaches, such as fronto-orbital advancement in treating nonsyndromic craniosynostosis. However, several articles report high reoperation rates in syndromic patients treated with EACS. This meta-analysis and review examines undesirable outcome rates (UORs), defined as reoperation or Whitaker category III/IV, in syndromic patients undergoing primary EACS compared with procedures that actively expand the cranial vault. Methods: PubMed and Embase were searched in June 2022 to identify all articles reporting primary reoperation or Whitaker outcomes for syndromic patients undergoing cranial vault expanding surgery or suturectomy. A meta-analysis of proportions was performed comparing UORs, and a trim-and-fill adjustment method was used to validate sensitivity and assess publication bias. Results: A total of 721 articles were screened. Five EACS articles (83 patients) and 22 active approach articles (478 patients) met inclusion criteria. Average UORs for EACS and active approaches were 26% (14%-38%) and 20% (13%-28%), respectively (P = 0.18). Reoperation occurred earlier in EACS patients (13.7 months postprimary surgery versus 37.1 months for active approaches, P = 0.003). Relapse presentations and reason for reoperation were also reviewed. Subjectively, EACS UORs were higher in all syndromes except Apert, and Saethre-Chotzen patients had the highest UOR for both approaches. Conclusions: There was no statistically significant increase in UORs among syndromic patients treated with EACS compared with traditional approaches, although EACS patients required revision significantly sooner. Uncertainties regarding the long-term efficacy of EACS in children with syndromic craniosynostosis should be revisited as more data become available.

Morphology of the Occipital Bones and Foramen Magnum Resulting From Premature Minor Suture Fusion in Crouzon Syndrome.

To identify skull-base growth patterns in Crouzon syndrome, we hypothesized premature minor suture fusion restricts occipital bone development, secondarily limiting foramen magnum expansion.Skull-base suture closure degree and cephalometric measurements were retrospectively studied using preoperative computed tomography (CT) scans and multiple linear regression analysis.Evaluation of multi-institutional CT images and 3D reconstructions from Wake Forest's Craniofacial Imaging Database (WFCID).Sixty preoperative patients with Crouzon syndrome under 12 years-old were selected from WFCID. The control group included 60 age- and sex-matched patients without craniosynostosis or prior craniofacial surgery.None.2D and 3D cephalometric measurements.3D volumetric evaluation of the basioccipital, exo-occipital, and supraoccipital bones revealed decreased growth in Crouzon syndrome, attributed solely to premature minor suture fusion. Spheno-occipital (ß = -398.75; P < .05) and petrous-occipital (ß = -727.5; P < .001) suture fusion reduced growth of the basioccipital bone; lambdoid suture (ß = -14 723.1; P < .001) and occipitomastoid synchondrosis (ß = -16 419.3; P < .001) fusion reduced growth of the supraoccipital bone; and petrous-occipital suture (ß = -673.3; P < .001), anterior intraoccipital synchondrosis (ß = -368.47; P < .05), and posterior intraoccipital synchondrosis (ß = -6261.42; P < .01) fusion reduced growth of the exo-occipital bone. Foramen magnum morphology is restricted in Crouzon syndrome but not directly caused by early suture fusion.Premature minor suture fusion restricts the volume of developing occipital bones providing a plausible mechanism for observed foramen magnum anomalies.

The First Hybrid International Educational Comprehensive Cleft Care Workshop.

OBJECTIVE: Describe the first hybrid global simulation-based comprehensive cleft care workshop, evaluate impact on participants, and compare experiences based on in-person versus virtual attendance. DESIGN: Cross-sectional survey-based evaluation. SETTING: International comprehensive cleft care workshop. PARTICIPANTS: Total of 489 participants. INTERVENTIONS: Three-day simulation-based hybrid comprehensive cleft care workshop. MAIN OUTCOME MEASURES: Participant demographic data, perceived barriers and interventions needed for global comprehensive cleft care delivery, participant workshop satisfaction, and perceived short-term impact on practice stratified by in-person versus virtual attendance. RESULTS: The workshop included 489 participants from 5 continents. The response rate was 39.9%. Participants perceived financial factors (30.3%) the most significant barrier and improvement in training (39.8%) as the most important intervention to overcome barriers facing cleft care delivery in low to middle-income countries. All participants reported a high level of satisfaction with the workshop and a strong positive perceived short-term impact on their practice. Importantly, while this was true for both in-person and virtual attendees, in-person attendees reported a significantly higher satisfaction with the workshop (28.63 ± 3.08 vs 27.63 ± 3.93; P = .04) and perceived impact on their clinical practice (22.37 ± 3.42 vs 21.02 ± 3.45 P = .01). CONCLUSION: Hybrid simulation-based educational comprehensive cleft care workshops are overall well received by participants and have a positive perceived impact on their clinical practices. In-person attendance is associated with significantly higher satisfaction and perceived impact on practice. Considering that financial and health constraints may limit live meeting attendance, future efforts will focus on making in-person and virtual attendance more comparable.

The Virtual Interview Experience: Advantages, Disadvantages, and Trends in Applicant Behavior.

Residency programs and applicants were forced to hold virtual interviews during the 2020-2021 application cycle. Inability to evaluate a program and/or applicant in person has intangible drawbacks. However, there are obvious advantages: cost, convenience, and comfort. Do the advantages outweigh the disadvantages? How have applicant behaviors changed to learn about programs in a virtual-only interview process? Methods: A survey was distributed to 302 applicants to a single plastic surgery residency program during the 2020 application cycle. Demographics, social media presence and utilization, and experience with the virtual application and interview process were analyzed. A 2018 survey from our institution was compared with a subset of questions for longitudinal analysis. Results: Seventy-six respondents (25.2%) completed the survey. Most applicants (88.2%) spent less than $1000 during the interview and application cycle. Over half (56.6%) did not receive letters of recommendation from outside their home program. A significant minority (27.6%) of applicants attended more than one interview in a single day. Compared to 2018, applicants in 2021 were significantly more likely to access alternative digital resources (forums/discussion boards, social media, and podcasts) when learning about programs. Average number of interviews remains in the range of pre-COVID studies, but the percentage of interviews attended increased. Conclusions: Applicants spent substantially less money on interviews and relied on alternative digital sources to learn about residency programs. This study objectively quantifies the advantages of virtual interviews. Disadvantages include inability to assess "fit" and lack of nonverbal communication.

"Primary Correction of the Cleft Nasal Septum: A Systematic Review".

Patients affected by cleft lip and palate have a characteristic nasal deformity; however, the treatment timeline varies amongst providers. There has been a shift from a more conservative approach to earlier intervention in order to allow for more normal development of the nose. Form, function, and future development all must be considered. For this reason, this investigation was undertaken to present the current literature available on the effects to all aspects of primary septoplasty in the cleft nasal deformity.An initial list of 222 papers was identified, and it was determined that 16 papers fit the inclusion criteria. Studies were included in which the initial age of operation for the majority of patients was between 3 and 12 months and in which patients underwent septal repositioning at the time of cleft lip repair. These papers were all reviewed by a single author initially, and the results recorded. All results were then verified by a second author for accuracy and completeness.Symmetry was found to be improved by primary septoplasty. Growth was not found to be impaired in any study; data was insufficient to indicate that growth was improved. Obstruction was improved as determined both by imaging, endoscopy, and patient survey. Finally, reoperation rates occurred at an acceptable rate not exceeding that of primary rhinoplasty without septoplasty.Primary septoplasty leads to better aesthetic symmetry and function of the cleft nose without impairing growth. This change is maintained into adulthood often without the need for revisionary surgery.

Premature Fusion of the Posterior Intraoccipital Synchondrosis, A Minor Suture Mimic of Lambdoid Craniosynostosis.

ABSTRACT: The posterior intraoccipital synchondrosis (PIOS) is a cartilaginous division separating the exoccipital and supraoccipital bones, allowing for flexibility of the cranial base at birth and which later ossifies in adolescence. The authors report a case of right PIOS synostosis that resembled right lambdoid synostosis, with left occipital bossing in a healthy, six-month-old female with an unremarkable birth history and no antecedent trauma. An initial referral was made from the pediatrician to oncology because of a concern over the presence and growth of a possible mass at the left occiput. Over 8 months, this mass grew and became more firm, accompanied by left occipital bossing and right occipital flattening. A computed tomography was obtained, which demonstrated the fusion of the PIOS, prompting a referral to plastic surgery. Cranial vault remodeling with switch cranioplasty was performed at age 14 months, complicated only by a superficial infection along the suture line. There are exceedingly few reports of PIOS synostosis, with occipital osteodiastasis related to birth trauma as the only prior explanation for this condition. With no birth trauma and delayed onset, our case likely represents idiopathic PIOS synostosis. With the many similarities in presentation, the surgical approaches commonly used for lambdoid synostosis, particularly switch cranioplasty, are suitable solutions to PIO synchondrosis with optimal functional and aesthetic outcomes.

A1 Pulley Tenderness as a Modification to Tenderness along the Flexor Sheath in Diagnosing Pyogenic Flexor Tenosynovitis.

Background: Pyogenic flexor tenosynovitis (PFT) is frequently diagnosed by physical examination according to the Kanavel signs. This study proposes a modification of the Kanavel sign "tenderness over the course of the flexor sheath" by including palpation of the A1 pulley to increase specificity for diagnosis. Methods: A retrospective review was performed over 8 months for patients in the emergency department who received a consult to hand surgery to rule out PFT. Two cohorts, nonPFT infections and PFT infections, were studied for the presence or absence of the four Kanavel signs, as well as tenderness specifically over the A1 pulley on the affected digit(s) or T1 pulley of the thumb. Results: There were a total of 33 patients in the two cohorts (21 nonPFT, 12 PFT) with statistically significant differences with regard to the presence of all the Kanavel signs. A1 pulley tenderness had the greatest odds ratio, positive predictive value, specificity, and accuracy when compared with all Kanavel signs. When used in conjunction with each Kanavel sign, there was an increase in specificity in all four signs. Receiver operating characteristic analysis revealed increased area under the curve with A1 pulley tenderness added, indicating improved ability to classify hand infections as PFT versus nonPFT. Conclusion: Although the classic Kanavel signs have shown reliable clinical utility, this study finds that tenderness at the A1 pulley can be a useful specification of "tenderness over the course of the flexor sheath" to help with the diagnosis of PFT.

Safety of Mandibular Osteotomies in Infants with Pierre Robin Sequence: Computer-Aided Modeling to Characterize the Risks of Various Techniques.

BACKGROUND: Mandibular distraction osteogenesis is effective for the correction of severe tongue-based airway obstruction in infants with Pierre Robin sequence. Involved osteotomies may damage developing tooth buds and/or the inferior alveolar nerve. The authors evaluated the theoretical safety of various osteotomy techniques to better define infantile mandibular anatomy using computer-aided modeling. METHODS: Seven mandibular osteotomy techniques (oblique, inverted-L, multiangular, walking stick, high oblique, vertical/high inverted-L, and horizontal) were simulated using computed tomography studies from infants with Pierre Robin sequence and without other associated conditions. Software was used to manually segment the mandibular bone, inferior alveolar nerve, and tooth buds. RESULTS: Sixty-five computed tomography scans were included, yielding 130 hemimandibles. The horizontal osteotomy pattern had significantly lower theoretical risk of tooth bud (p < 0.001) and inferior alveolar nerve involvement (p < 0.001) than all other patterns. Osteotomies with high vertical components (i.e., vertical, walking stick, and multiangular) had lower theoretical tooth bud involvement than the more proximal oblique and inverted-L osteotomies (p < 0.001). Average lingula location was measured at a point 65 percent of the mandibular width from anterior mandibular border and 63 percent of the mandibular height from the inferior mandibular border. CONCLUSIONS: Surgical planning with computed tomography scans can help evaluate an infant's mandibular anatomy to select an osteotomy that reduces morbidity risks. Regardless of technique, tooth buds and the inferior alveolar nerve are often included in osteotomies. The lingula location in this study demonstrates a position more superior and posterior than that previously described. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Automated 3D Analysis of Zygomaticomaxillary Fracture Rotation and Displacement.

BACKGROUND: The zygomaticomaxillary complex (ZMC) can experience a multitude of deforming forces. There is limited understanding on which deformities alter patient outcomes. This study utilized an automated, three-dimensional analysis to elucidate which fracture patterns and rotational deformities are most prevalent and associated with postoperative complications. METHODS: This study was a 7-year retrospective review of patients with unilateral ZMC fractures who underwent surgical intervention. Patient demographics, injury mechanisms, presenting symptoms, and postoperative outcomes were collected. Segmentation was completed using Mimics software. The lateral-medial, superior-inferior, and anterior-posterior axes were manually identified on the zygoma and then displacement, rotational direction, and rotational degrees were automatically calculated using Geomagic software. Total displacement score was generated by summation of individual displacement scores at each of the five sutures. RESULTS: Eighty-one patients satisfied inclusion criteria. The most prevalent rotational pattern of the zygoma was medially-superiorly-posteriorly (P < 0.001). When comparing rotation along the three axes, the zygoma had the greatest rotation along the lateral-medial axis compared with the superior-inferior (P = 0.003) and anterior-posterior (P < 0.001) axes. Within each axis, the zygoma was more likely to rotate medially than laterally (P = 0.003) and posteriorly than anteriorly (P = 0.01). Multivariate analysis identified total displacement scores and degrees rotated along the lateral-medial axis as significant predictors of facial complications and reoperation. CONCLUSIONS: This study suggests that patients with unilateral ZMC fractures who undergo surgical intervention are at an increased risk for adverse outcomes with greater rotation along the lateral-medial axis and higher total displacement scores. Additionally, the automated analysis method described can provide objective data to better characterize ZMC fractures.