Targeting CD36-Mediated Lipid Metabolism by Selective Inhibitor-Augmented Antitumor Immune Responses in Oral Cancer.

The fatty acid receptor CD36 is expressed on various malignant cells and is suggested to contribute to tumor progression. CD36 is also expressed by several immune cells and involved in immune responses and may be a potential target in cancer immunotherapy. In this study, we investigated whether the selective inhibition of CD36 can inhibit tumor progression and facilitate an antitumor immune response in oral squamous carcinoma cells (OSCCs). We assessed the effects of sulfosuccinimidyl oleate sodium (SSO), a CD36 inhibitor, on the proliferation apoptosis and alteration in tumor cell surface expression levels of immune accessory molecules in vitro. We also assessed whether SSO-treated OSCCs could promote a T cell response via a Mixed Lymphocyte Reaction (MLR) assay. We also investigated the direct antitumor effects and immunomodulatory effects of SSO using a mouse oral cancer OSCC model. SSO treatment significantly inhibited OSCC proliferation, increased apoptotic cell death, and upregulated the cell surface expression of several immune accessory molecules, including CD83, MHC-Class II, and PD-L1. SSO-treated OSCCs augmented T cell proliferation following MLR. In vivo SSO administration significantly attenuated mouse tumor growth with an increased proportion of immune cells, including CD4+ T, CD8+ T, and dendritic cells; it also decreased the proportion of immune suppressive cells, such as myeloid-derived suppressor and regulatory T cells. These results suggest that the selective inhibition of CD36 can induce direct and indirect antitumor effects by facilitating host antitumor immune responses in OSCCs.

Short-Term Follow-up of Surgical Management Verruca Vulgaris with Modified Estlander Flap: A Case Report and Recent Literature Review.

Background: Verruca vulgaris (VV), widely known as warts, is a common benign skin lesion, which is caused by human papilloma virus. In some cases, VV can be developed within the oral cavity. Surgical excision is considered as the most preferred treatment modality for both cutaneous and oral VV which could be challenge to deal with. Case Report: Herein, a short-term case of a 64-year-old male patient with a large oral VV, involving the lower and upper lips, and commissure was reported. The patient underwent a wide surgical excision, resulting in a significant lip defect. The modified Estlander flap technique was applied to treat the defect and restore lip function. At one year post operation, no signs of recurrence were recorded, and the Estlander flap technique displayed satisfactory outcomes. Conclusions: Surgical management of oral VV involving lips may leaves large defect, which requires consideration in defect reconstruction. This case report shows that reconstruction of the defect with a modified estlander flap resulted in a good outcome, with satisfactory functionality for the patient. Key words:Estlander flap, verruca vulgaris, surgical excision.

Post-surgical complications of supernumerary teeth in the mandibular premolar area: A systematic review.

In the mandibular premolar area, supernumerary teeth are a rare disorder that are rarely documented in the literature. The purpose of this study was to evaluate the post-surgical problems associated with the buccal and lingual techniques used to treat the extra teeth in this area. Using PubMed, PubMed Central, Science Direct, Cochrane, Wiley, and manual search, a thorough search was done to locate and identify cases and case series with extra teeth in the mandibular premolar region. For every study that was included, data on the surgical technique and postoperative problems were documented. Seven studies involving 90 patients were included. Supernumerary teeth in the mandibular premolar region were predominantly found in male patients (65.55 %), with most cases occurring in the right mandibular region (77.16 %). Postoperative complications after removing supernumerary teeth using buccal and lingual approaches were similar, with only one complication reported among the 90 cases reviewed. Although the findings suggest that surgical management of supernumerary teeth in the mandibular premolar region is relatively safe, caution is advised due to the limited sample size. Detailed pre-operative evaluation, a comprehensive treatment plan, and regular follow-up can minimize postoperative complications.

Advanced outcomes of mixed reality usage in orthognathic surgery: a systematic review.

INTRODUCTION: Orthognathic surgery (OGS) is a highly sophisticated surgical technique that aims to repair a variety of skeletal and dental abnormalities, including misaligned jaws and teeth. It requires precise preoperative preparation and advanced surgical skills, which are typically learned through years of practical experience in operating rooms or laboratory-based surgical training facilities utilizing cadavers or models. The traditional physical hands-on method of surgical training is still used at OGS. However, this method requires a longer time of preparation. Currently, mixed reality (MR)-a combination of virtual reality and augmented reality technology-is an innovation of OGS. The present study aimed to present a comprehensive review of studies that assessed the advantages of utilizing mixed reality technology in OGS. METHODS: A modified Population, Intervention, Comparison, Outcome strategy was performed using a combination of electronic (PubMed, Cochrane, Embase) and manual searches between 2013 and 2023 exploring mixed reality (MR) technology in OGS in the last 10 years. The inclusion criteria were limited to the patient and study model focusing on the clinical application of MR and the associated field of OGS. RESULT: The initial search indicated 1731 studies, of which 17 studies were included for analysis. The main results indicated that the use of MR technology in OGS led to high accuracy and time reduction as primary outcomes and cost-effectiveness and skill improvement as secondary outcomes. The review firmly concluded that MR technology exhibited a positive impact on students, trainees, and oromaxillofacial surgeons. However, due to the heterogeneity of the included studies, meta-analyses could not be performed. Collectively, these findings provide strong evidence for the advantages of MR technology in orthognathic surgery. CONCLUSION: MR technology significantly improves OGS planning efficiency by providing pre-surgical information and serving as an intraoperative navigation tool, reducing surgical time without compromising outcomes. Virtual training using MR technology exerts a positive impact on knowledge and skill improvement for OGS. This innovative technology will revolutionize the healthcare system and enhance patient care.

Feasibility and Preliminary Efficacy of α-Calcium Sulfate Hemihydrate in Socket Preservation: Protocol for a Pilot Randomized Controlled Trial.

BACKGROUND: Tooth extraction procedures often lead to bone resorption, which can have adverse effects on the dimensions of the alveolar ridge. Research has shown that socket preservation techniques using bone graft substitutes can effectively minimize early bone loss in such cases. α-calcium sulfate hemihydrate (α-CSH) has garnered significant attention as a potential bone graft material due to its favorable properties, including osteoconductivity, angiogenic potential, and biocompatibility. Considering these facts, we developed a preliminary protocol for applying α-CSH in addressing alveolar bone loss following tooth extraction. OBJECTIVE: This research's general objective is to evaluate the feasibility and initial effectiveness of α-CSH as bone-inducing graft material for socket preservation after tooth extraction. METHODS: This preliminary clinical trial will involve 30 fresh extraction sockets from individuals aged 18-35 years. The participants will be divided into 2 groups: one group will receive α-CSH graft material after tooth extraction for socket preservation, while the other group will not receive any graft material. Throughout the study, the participants will be closely monitored for safety measures, which will include clinical examinations, radiographic imaging, and blood tests. Radiographic imaging will be used extensively to assist the progress of bone formation. RESULTS: The study commenced enrollment in August 2022 and is scheduled to conclude post assessments and analyses by the end of 2023. The results of the study are anticipated to be accessible in late 2024. CONCLUSIONS: This clinical study represents the initial investigation in humans to assess the feasibility and efficacy of α-CSH in alveolar bone regeneration. We hypothesize that the inclusion of α-CSH can greatly expedite the process of bone formation within fresh sockets, resulting in a swift restoration of bone height without the disadvantages associated with harvesting autogenous bone graft. TRIAL REGISTRATION: Indonesia Registry Center INA-D02FAHP; https://tinyurl.com/2jnf6n3s. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/49922.

Epidemiology, etiopathogenesis, and management of MRONJ: A European multicenter study.

INTRODUCTION: The purpose of this European multicenter study was to describe the general characteristics and risk factors of MRONJ lesions as well as their clinical diagnosis and management at different European Oral and Maxillofacial Surgery centers, in order to minimize selections biases and provide information about the epidemiology, etiopathogenesis, and the current trends in the treatment of MRONJ across Europe. MATERIALS AND METHODS: The following data were registered for each patient: gender; age at MRONJ diagnosis; past medical history; indication for antiresorptive or antiangiogenic therapy; type of antiresorptive medication; local risk factor for MRONJ; MRONJ Stage; anatomic location and symptoms; treatment; surgical complications; recurrence. RESULTS: A total of 537 patients (375 females, 162 males) with MRONJ were included. Statistically significant associations were found between patients with metastatic bone disease and recurrences (P < 0.0005) and between advanced MRONJ stages (stages 2 and 3) and recurrences (P < 0.005). Statistically significant associations were also found between male gender and recurrences (P < 0.05), and between MRONJ maxillary sites and recurrences (P < 0.0000005). CONCLUSIONS: A longer mean duration of antiresorptive medications before MRONJ onset was observed in patients affected by osteoporosis, whereas a shorter mean duration was observed in all metastatic bone cancer patients, and in particular in those affected by prostate cancer with bone metastases or multiple myeloma. Surgery plays an important role for the management of MRONJ lesions.

Effect of various post-curing light intensities, times, and energy levels on the color of 3D-printed resin crowns.

Background/purpose: Current 3D-printing technology has been widely used for creating dental resin restorations. This study aimed to evaluate the effect of light intensity, time, and energy post-curing on the surface color of 3D-printed resin crowns. However, the influences of post-curing parameters on the restoration after printing still need to be explored. Therefore, this project investigates the effect of post-cure conditions on resin color. Materials and methods: Specimens from single-crown (SC) and pontic (PO) specimens underwent post-curing at various light intensities (105, 210, 420, 630, and 860 mW/cm2) for 5, 10, and 15 min. Specimens were observed at three predetermined points and measured using a commercial spectrophotometer that utilizes the CIE Lab∗ color space. Subsequently, samples were analyzed for color differences (ΔE). Results: ΔE color differences in evaluated samples were influenced by the light intensity, time, and energy post-curing. SC samples showed a significant color difference (P < 0.05), with the lowest value at 5 min of 16 (860 mW/cm2), while 10 and 15 min had a difference of 4 (210 mW/cm2). PO samples exhibited a significant decrease in the color difference (P < 0.05) at 5 and 10 min of 16 (860 mW/cm2), and at 15 min of 12 (630 mW/cm2). Conclusion: The results of this study indicate that exposing a resin crown to a high light intensity results in color stability and allows shorter post-curing times.

Applying machine learning to assess the morphology of sculpted teeth.

Background/purpose: Producing tooth crowns through dental technology is a basic function of dentistry. The morphology of tooth crowns is the most important parameter for evaluating its acceptability. The procedures were divided into four steps: tooth collection, scanning skills, use of mathematical methods and software, and machine learning calculation. Materials and methods: Dental plaster rods were prepared. The effective data collected were to classify 121 teeth (15th tooth position), 342 teeth (16th tooth position), 69 teeth (21st tooth position), and 89 teeth (43rd tooth position), for a total of 621 teeth. The procedures are divided into four steps: tooth collection, scanning skills, use of mathematical methods and software, and machine learning calculation. Results: The area under the curve (AUC) value was 0, 0.5, and 0.72 in this study. The precision rate and recall rate of micro-averaging/macro-averaging were 0.75/0.73 and 0.75/0.72. If we took a newly carved tooth picture into the program, the current effectiveness of machine learning was about 70%-75% to evaluate the quality of tooth morphology. Through the calculation and analysis of the two different concepts of micro-average/macro-average and AUC, similar values could be obtained. Conclusion: This study established a set of procedures that can judge the quality of hand-carved plaster sticks and teeth, and the accuracy rate is about 70%-75%. It is expected that this process can be used to assist dental technicians in judging the pros and cons of hand-carved plaster sticks and teeth, so as to help dental technicians to learn the tooth morphology more effectively.

Microfragmented Fat and Biphasic Calcium Phosphates for Alveolar Cleft Repair: Protocol for a Prospective, Nonblinded, First-in-Human Clinical Study.

BACKGROUND: Biphasic calcium phosphates (BCP) may serve as off-the-shelf alternatives for iliac crest-derived autologous bone in alveolar cleft reconstructions. To add osteoinductivity to the osteoconductive BCPs to achieve similar regenerative capacity as autologous bone, a locally harvested buccal fat pad will be mechanically fractionated to generate microfragmented fat (MFAT), which has been shown to have high regenerative capacity due to high pericyte and mesenchymal stem cell content and a preserved perivascular niche. OBJECTIVE: Our primary objectives will be to assess the feasibility and safety of the BCP-MFAT combination. The secondary objective will be efficacy, which will be evaluated using radiographic imaging and histological and histomorphometric evaluation of biopsies taken 6 months postoperatively, concomitant with dental implant placement. METHODS: Eight patients with alveolar cleft (≥15 years) will be included in this prospective, nonblinded, first-in-human clinical study. MFAT will be prepared intraoperatively from the patient's own buccal fat pad. Regular blood tests and physical examinations will be conducted, and any adverse events (AEs) or serious EAs (SAEs) will be meticulously recorded. Radiographic imaging will be performed prior to surgery and at regular intervals after reconstruction of the alveolar cleft with the BCP-MFAT combination. Biopsies obtained after 6 months with a trephine drill used to prepare the implantation site will be assessed with histological and histomorphometric analyses after methylmethacrylate embedding and sectioning. RESULTS: The primary outcome parameter will be safety after 6 months' follow-up, as monitored closely using possible occurrences of SAEs based on radiographic imaging, blood tests, and physical examinations. For efficacy, radiographic imaging will be used for clinical grading of the bone construct using the Bergland scale. In addition, bone parameters such as bone volume, osteoid volume, graft volume, and number of osteoclasts will be histomorphometrically quantified. Recruitment started in November 2019, and the trial is currently in the follow-up stage. This protocol's current version is 1.0, dated September 15, 2019. CONCLUSIONS: In this first-in-human study, not only safety but also the histologically and radiographically assessed regenerative potential of the BCP-MFAT combination will be evaluated in an alveolar cleft model. When an SAE occurs, it will be concluded that the BCP-MFAT combination is not yet safe in the current setting. Regarding AEs, if they do not occur at a higher frequency than that in patients treated with standard care (autologous bone) or can be resolved by noninvasive conventional methods (eg, with analgesics or antibiotics), the BCP-MFAT combination will be considered safe. In all other cases, the BCP-MFAT combination will not yet be considered safe. TRIAL REGISTRATION: Indonesia Clinical Trial Registry INA-EW74C1N; https://tinyurl.com/28tnrr64. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/42371.

Contextualizing sociocultural beliefs about cleft, knowledge of the treatments, and factors associated with delay of treatment in Eastern Indonesia.

INTRODUCTION: Indonesia is a multicultural Asian country with a high incidence of cleft. This study contextualizes how patients' sociocultural backgrounds hinder cleft management in a diverse nation. MATERIAL AND METHODS: This study involved 202 families of cleft patients attending six tertiary care hospitals in South Sulawesi between 2021 and 2022. A mixed-methods, descriptive cross-sectional study employed semi-structured interviews and focus group discussions. Thematic content analysis was done using Murdock's causal attribution of illness. Knowledge of the treatments and surgery expectations used open coding. We held medical team focus group discussions to validate education on treatments. Cleft management education was thematically analyzed based on Indonesia's Minister of Health Decree. RESULTS: Two hundred-two families and ten medical teams participated. Thematic content analysis revealed common beliefs and factors that hinder medical treatments. The participants were 109 Buginese, 57 Makassarese, 16 Durinese, 8 Luwunese, 8 Torajanese, and 4 Mandarese. 22.3 % were unaware of causation, while 29.2 % attributed it to natural causes. About half of the interviewees believed in supernatural attribution. Even though 40 % of participants knew little about the surgery, they agreed that surgery improves appearance and speech. Medical treatments are delayed due to a lack of treatment knowledge, parents' concerns about surgical safety, and beliefs about causes. DISCUSSION: Indigenous societies in South Sulawesi believe in supernatural causes of cleft. Most had incomplete surgical treatment information. An intensive educational health program about causes, treatments, medical specialists, and treatment goals is warranted to enhance patient compliance with medical treatment, ultimately leading to improved health outcomes.

Surgical management of dentigerous cyst arises from ectopic tooth: A report of three consecutive cases and literature review.

BACKGROUND: Dentigerous cysts are slow-growing, asymptomatic lesions that typically form around the crowns of impacted teeth. They are not detected until they start to harm the tissues around the teeth. AIM: The present study aimed to describe surgical techniques for treating dentigerous cysts associated with ectopic teeth. CASES: Three patients with dentigerous cysts associated with ectopic teeth, their surgical approaches, and the supporting literature are presented herein. In two cases, the surgical technique used was intra-oral, and in one case was extra-oral. Under general anesthesia, dentigerous cyst enucleation and ectopic tooth removal were carried out. DISCUSSION: In the present study, the ectopic tooth cases were all linked to dentigerous cysts. Enucleation or marsupialization treatments could be used to treat dentigerous cysts. Enucleation with the removal of the impacted tooth is the preferred treatment for dentigerous cysts. CONCLUSION: To perform minimally invasive surgery, the position of the ectopic teeth, the accessibility of the surgical site, the degree of bone reduction, and the simplicity of instrumentation should all be considered.

Cultural Beliefs on Cleft lip and/or Cleft Palate and Their Implications on Management: A Systematic Review.

OBJECTIVE: This article examines and summarizes the published epidemiological literature on cross-cultural variations. Particular emphasis was put on addressing cross-cultural beliefs on the causes, management, and attitude toward cleft lip and/or cleft palate. A healthcare provider's awareness of these cross-cultural attitudes and beliefs is vital for promoting effective collaboration with patients' families and ensuring a favorable medical outcome. DESIGN: Systematic review. SETTING: Not applicable. PARTICIPANTS: Patients with cleft lip and/or cleft palate, their families, their communities, and healthcare providers. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Not applicable. RESULTS: All relevant and eligible studies were identified using PubMed and Google Scholar databases. The cultural belief was categorized and measured using Murdock's Theories of Illness. The study was reported in compliance with PRISMA guidelines. The quality of the selected studies was evaluated in accordance with the Critical Appraisal Skills Programme criteria (CASP). Fourteen articles covering thirteen countries on four continents met the inclusion criteria. In diverse communities, cleft lip and/or cleft palate was attributed to natural (infection, medication, improper diet, smoke, or radiation) or supernatural (God, eclipse, ancestral spirit, and curse) causes. Reported consequences include stigmatization, inappropriate treatments, leaving patients untreated, and infanticide. CONCLUSION: Cultural beliefs are the main cause of misconceptions surrounding a cleft lip and/or cleft palate. There is also a need for public health care providers' intervention to educate society about the natural causes and ease of management, thereby increasing opportunities for patients substantially.

Amniotic Band Syndrome with Severe Facial Cleft: A Case Report.

Cases of severe bilateral Tessier 4 cleft with unilateral Tessier 3 cleft and additional involvement of the amniotic band syndrome are rarer. This case reports a very rare case of ABS with severe facial cleft. Postoperative progress was satisfactory and the patient achieved functional recovery. The patient underwent several miner reconstructive surgeries and appropriate surgical treatment is necessary to restore the patient's social life.

An Innovative Biofunctional Composite Hydrogel with Enhanced Printability, Rheological Properties, and Structural Integrity for Cell Scaffold Applications.

The present study was conducted to manipulate various biomaterials to find potential hydrogel formulations through three-dimensional (3D) bioprinting fabrication for tissue repair, reconstruction, or regeneration. The hydrogels were prepared using sodium alginate and gelatin combined with different concentrations of Pluronic F127 (6% (3 g), 8% (4 g), and 10% (5 g)) and were marked as AGF-6%, AGF-8%, and AGF-10%, respectively. The properties of the hydrogels were investigated using a contact angle goniometer, rheometer, and 3D bioprinter. In addition, the osteoblast-like cell line (MG-63) was used to evaluate the cell viability including hydrogels before and after 3D bioprinting. It was found that the ratio of contact angle was lowest at AGF-6%, and the rheological results were higher for all samples of AGF-6%, AGF-8%, and AGF-10% compared with the control sample. The printability indicated that the AGF-6% hydrogel possessed great potential in creating a cell scaffold with shape integrity. Moreover, the live/dead assay also presented the highest numbers of live cells before printing compared with after printing. However, the number of live cells on day 7 was higher than on day 1 before and after printing (** p < 0.01). Therefore, the combination of AGF-6% could be developed as a biofunctional hydrogel formulation for potential tissue regeneration applications.

Assessment of sagittal root position, alveolar bone concavity, and labial bone perforation in the mandibular anterior tooth region for immediate implant placement.

Background/purpose: Immediate implant placement in the mandibular anterior tooth region requires a thorough understanding of the alveolar bone anatomy for determining the ideal implant position and preventing labial bone perforation. The anatomical characteristics of the jaws are closely related to the sagittal root position (SRP) and labial concavity of the alveolar bone. This study evaluated SRP, labial concavity, and labial bone perforation in the mandibular anterior tooth region. Materials and methods: Cone-beam computed tomography images of 116 participants (696 teeth) were uploaded to medical imaging software. SRP classification, labial concavity of the alveolar bone, and labial bone perforation were analyzed. A t-test was performed to compare measurements between the central and lateral incisors, central incisors and canines, and lateral incisors and canines. Results: The results revealed that the frequency of SRP Class I (88.20%) was the highest, and that of SRP Class III was the lowest (0.53%). Central incisors had the highest mean labial concavity (144.5°), followed by the canines (143.9°) and lateral incisors (143.3°), and the differences were significant between any two of the tooth groups (all P < 0.05). The frequency distribution of labial bone perforation was the highest in central incisors (69.9%), followed by the canines (40.5%) and lateral incisors (10.8%). Conclusion: The majority of mandibular anterior teeth had SRP Class I, with Class III being the least prevalent. Central incisors had the highest mean alveolar bone concavity angle and the most frequent labial bone perforations.

A network meta-analysis assessing the effectiveness of various radical and conservative surgical approaches regarding recurrence in treating solid/multicystic ameloblastomas.

Multiple treatment approaches have been undertaken to reduce the incidence of recurrence in solid/multicystic ameloblastoma (SMA), both conservative and radical. A network meta-analysis (NMA) was conducted to assess and compare the effectiveness of these various treatment approaches concurrently. This study was reported based on the Preferred Reporting Items for Systematic Reviews for Network Meta-Analysis (PRISMA-NMA) statement. PubMed (MEDLINE), ScienceDirect, Scopus, and Web of Science were searched until August 10, 2021. The NMA was conducted using the STATA program. Of 1153 records identified in the search, seven observational studies with 180 patients were included. Six different treatment approaches were identified. Segmental resection ranked highest for reducing the recurrence rate with the highest SUCRA score (77.7), followed by curettage with cryotherapy (66.9) and marginal resection (49.3). Network inconsistencies and publication bias appeared to be absent. According to the Confidence in Network Meta-Analysis (CINeMa) method, the evidence's certainty was low for all comparisons due to imprecision and within-study bias. In conclusion, this study is the first NMA in the field of ameloblastoma. Segmental resection seemed to be the most effective treatment approach for minimizing recurrence in SMA patients. Nevertheless, weak certainty of evidence makes that the results must be regarded with caution.

Stem Cell-Based Tissue Engineering for Cleft Defects: Systematic Review and Meta-Analysis.

This study aimed to analyze the efficacy of stem cell-based tissue engineering for the treatment of alveolar cleft (AC) and cleft palate (CP) defects in animal models.Systematic review and meta-analysis.Preclinical studies on alveolar cleft repair in maxillofacial practice.Electronic search was performed using PubMed, Embase, and Cochrane databases. Pre-clinical studies, where stem cell-based tissue engineering was used in the reconstruction of AC and CP in animal models were included. Quality of the selected articles was evaluated using SYRCLE (SYstematic Review Centre for Laboratory animal Experimentation).Review of alveolar cleft bone augmentation interventions in preclinical models.Outcome parameters registered were new bone formation (NBF) and/or bone mineral density (BMD).Thirteen large and twelve small animal studies on AC (21) and CP (4) reconstructions were included. Studies had an unclear-to-high risk of bias. Bone marrow mesenchymal stem cells were the most widely used cell source. Meta-analyses for AC indicated non-significant benefits in favor of: (1) scaffold + cells over scaffold-only (NBF P = .13); and (2) scaffold + cells over empty control (NBF P = .66; BMD P = .31). Interestingly, dog studies using regenerative grafts showed similar to superior bone formation compared to autografts. Meta analysis for the CP group was not possible.AC and CP reconstructions are enhanced by addition of osteogenic cells to biomaterials. Directions and estimates of treatment effect are useful to predict therapeutic efficacy and guide future clinical trials of bone tissue engineering.

Postoperative Daycare as a Safe and Cost-Effective Option for Secondary Alveolar Bone Graft (SABG) Surgery: A Retrospective Comparative Cohort Study.

OBJECTIVE: To evaluate the outcomes of Secondary Alveolar Bone Grafting (SABG) in patients treated either in daycare or with multiple day hospitalization (MDH) in relation to costs and complication rates. DESIGN: Retrospective comparative cohort study. SETTING: The data was collected from two settings: Postoperative daycare or MDH after oral cleft surgery in an Academic Medical Center in The Netherlands. PATIENTS: Data of 137 patients with unilateral Cleft lip, alveolus, and palate (CLAP) treated between 2006-2018 were evaluated. Registered clinical variables: age, gender, cleft subtype, bone donor site, type of hospitalization, length of stay, additional surgery, complications, surgeons, and costs. INTERVENTIONS: Closure of the alveolar cleft with/without closure of the anterior palate. MAIN OUTCOME MEASURES: Univariate analyses. RESULTS: Of the 137 patients, 46.7% were treated in MDH, and 53.3% in daycare. Total costs for daycare were significantly lower (P < .001). All patients treated in daycare received mandibular symphysis bone, whereas in MDH, 46.9% received iliac crest bone instead. Bone donor site was associated with postoperative care type. Complication rates were slightly but not significantly higher in daycare (26%) vs. MDH (14.1%) (P = .09). Most were Grade I (minor) according to Clavien Dindo classification. CONCLUSIONS: Daycare after alveolar cleft surgery is about as safe as MDH, but significantly cheaper.

Evaluation of sagittal root position and labial alveolar bone concavity in the maxillary anterior tooth area for immediate implant placement.

BACKGROUND: The anatomical characteristics of the maxillary labial alveolar bone play a crucial role in the treatment planning of immediate implant placement. The sagittal root position (SRP) and alveolar bone concavity are closely related to anatomical characteristics in determining the ideal implant position. This study evaluated the SRP and labial alveolar bone concavity in the maxillary anterior teeth area. METHODS: Cone-beam computed tomography images of 120 samples involving 720 teeth were uploaded to the medical imaging software. The SRP was classified as Class I, II, III, or IV, and the concavity of labial alveolar bone was measured. A T test was performed to compare measurements between the central and lateral incisors, between the central incisors and canines, and between the lateral incisors and canine. RESULTS: The majority of the SRPs of the maxillary anterior teeth were class I (engaging the labial cortical plate) with frequencies of 98.3%, 85.8%, and 81.7% for the canines, lateral incisors, and central incisors, respectively. In terms of concavity of labial alveolar bone in maxillary tooth area, canines also had the largest mean value (139.5°), followed by lateral incisors, whereas central incisors has the smallest mean value (131.7°). The results of the T test revealed a significant difference ( p < 0.001) in labial alveolar bone concavity between central and lateral incisors, between central incisors and canines, and between lateral incisors and canines. CONCLUSION: Most maxillary anterior teeth were classified as Class I SRP, Class III SRP was the least prevalent, and the concavity of the labial alveolar bone significantly differed between the central and lateral incisors, between the central incisors and canines, and between the lateral incisors and canines. In addition, the canines had the highest mean alveolar bone concavity angle, indicating that less concavity in the canines area.

The epidemiology and management of odontomas: a European multicenter study.

INTRODUCTION: Odontoma is the most commonly diagnosed odontogenic tumor of the oral cavity. The objective of the present study was to assess the demographic variables, patterns, diagnostic features, and management issues of odontomas treated at several European departments of maxillofacial and oral surgery. MATERIALS AND METHODS: This study was conducted at 8 European departments of oral surgery between January 1, 2004, and December 31, 2018. Only patients with odontomas were included. The following data were recorded for each patient: gender, age, comorbidities, site, size of odontomas, radiographic features, type of odontoma, treatment of odontomas, treatment of associated teeth, complications, and recurrence. RESULTS: A total of 127 patients (70 male and 57 female patients) with odontomas were included. The mean age was 22 years; 71 odontomas were found in the mandible, whereas 56 in the maxilla. In the mandible, the most frequently involved subsite was the parasymphysis, while in the maxilla, the most common subsite was the upper incisor region. The mean size of included odontomas was 15.3 mm. On the whole, 62 complex odontomas, 50 compound odontomas, and 15 mixed-type odontomas were observed. Complete excision of the odontomas was performed in 121 patients. In 24 patients, the extraction of deciduous teeth was performed, and in 43 patients, one or more permanent teeth were removed. Finally, in 9 patients, a partial excision of the odontoma was performed. Recurrence was observed in 4 cases out of 127 patients. CONCLUSIONS: Dental practitioners should be aware of the distinct clinical and radiographic features of odontoma in order to perform an appropriate and early diagnosis. Conventional radiography, such as panoramic radiograph, is often sufficient technique for a diagnosis after clinical suspicion or for an incidental diagnosis to prevent later complications, such as impaction or failure of eruption of teeth.