The Use of a Novel On-bone Femoral Spacer Molding Device for Reducing Femoral Spacer Complications in Periprosthetic Total Knee Infection: Preliminary Results.

Background: The complications of mobile cement spacer are common. To address these issues, a novel on-bone femoral molding device (FMD) has been developed to enhance stability between the spacer-bone. This study investigated the clinical outcomes and complications associated with this novel FMD. Methods: The FMD was developed using a reverse engineering program with the on-bone molding concept. Five knees of 4 patients were examined. The bone status, ambulatory ability, knee range of motion, and femoral spacer complications were followed up until 3 months after the second-stage surgery. Results: The infection was successfully treated in all patients. The interim period was 21.6 ± 4.5 weeks. The range of motion measured before the first surgery, before the second surgery, and 3 months after the second surgery was 104.2 ± 43.1, 105.8 ± 20.0, and 124.0 ± 18.5 degrees, respectively. No femoral spacer complications were observed. One knee joint subluxation and 1 minor tibial spacer fracture occurred. Conclusions: Newly developed FMD appears safe during initial proof-of-concept in patients with stage 1 to 2B bone loss. It prevents femoral spacer complications in a specific bone defect type without causing additional bone loss and facilitates range of motion during the interim period. Precise gap assessment and appropriate tibial cement spacer thickness could prevent knee dislocation.

Effectiveness of laser welding in cerclage wiring fixation: a biomechanical study.

Introduction: Cerclage wiring is a common orthopedic procedure for fracture fixation. However, previous studies reported wiring-related perioperative complications, such as wire loosening or breakage, with an incidence rate of up to 77%. Recently, the use of laser welding on medical implants was introduced to connect biomedical materials. This study used laser technology to weld between wires after conventional cerclage fixation. We hypothesized that the laser welding could significantly increase the biomechanical properties of cerclage wiring fixation. Materials and methods: Twenty-five wiring models underwent biomechanical tests in five cerclage wiring configurations (five models per group), namely, (1) single loop, (2) single loop with laser welding, (3) double loop, (4) double loop with one-side laser welding, and (5) double loop with two-side laser welding. Characteristics such as load to failure, mode of failure, and wiring failure were compared between groups. The biocompatibility for a 316L stainless steel wire with laser welding was evaluated via an in vitro hemolysis test. Results: Mean load to failure of the double loop with one-side and two-side laser welding groups were 3,596 ± 346 N and 3,667 ± 240 N, which were significantly higher than for the double-loop group (2,919 ± 717 N) (p = 0.012 and p = 0.044, respectively). Conversely, no significant difference was shown in the comparison of the mean load to failure between the single loop and the single loop with laser-welded cerclage wire (1,251 ± 72 N, 1,352 ± 122 N, and p = 0.12). Untwisted wire and wire breakage were the most common mode of failure. All welding specimens revealed non-hemolytic effects from in vitro hemolysis test. Conclusion: Laser welding on cerclage wiring significantly increases the biomechanical property of double cerclage wire fixation. However, further biocompatibility tests and clinical studies are still recommended.

Abductor muscle function after anterolateral approach in patients with unilateral end-stage hip osteoarthritis undergoing total hip arthroplasty: A prospective study.

Background: Total hip arthroplasty (THA) is a successful procedure for treating end-stage hip osteoarthritis (OA). Regarding the surgical approach for THA, the anterolateral (AL) approach, which requires anterior hemimyotomy of the gluteus medius muscle, has shown a long-term favorable outcome. However, to date, complete information related to hip abductor muscle outcomes after the AL approach is unavailable. This study therefore aimed to evaluate the postoperative outcome of patients who undergo THA using the AL approach in terms of hip abductor muscle recovery, pain, function, and muscle healing status. Methods: Twenty patients diagnosed with unilateral end-stage hip OA underwent cementless THA with the AL approach. All patient procedures were performed by a single surgeon. Preoperative and postoperative data were collected at 2-week, 6-week, 3-month, and 6-month follow-up periods. Hip abductor muscle power was measured via handheld dynamometer. The healing of the musculotendinous repair was evaluated with magnetic resonance imaging at 9 months. Results: After THA, hip abductor muscle power in the operated hip significantly increased as early as 3 months post-procedure when compared with the preoperative value (p < 0.05). The other parameters-including pain score, Harris hip score, and WOMAC score-significantly improved as early as 2 weeks post-operation (p < 0.05). In all patients, MRI scans showed good healing of the muscle repair site without a gap in the gluteus medius muscle. However, three patients (15%) had some fibrosis and tendon swelling at the repair site. Conclusion: This study demonstrated that patients with end-stage hip OA could experience significantly improved hip abductor motor function as early as 3 months after undergoing THA with the AL approach. Moreover, despite patients experiencing anterior hemimyotomy of the gluteus medius muscle, no significant complications emerged at the muscle repair site in the AL approach.

Correlation between shape-closed femoral stem design and bone cement implantation syndrome in osteoporotic elderly femoral neck fracture undergoing cemented hip arthroplasty: A retrospective case-control study in 128 patients.

BACKGROUND: Bone cement implantation syndrome (BCIS) is a serious and potentially fatal complication especially in patients with osteoporotic femoral neck fracture (OFNF) undergoing cemented hip arthroplasty (CHA). Recent studies showed that the shape-closed femoral stem profile could lead to a significant increase of the intramedullary pressure during cementation and prosthesis insertion. This study aimed to (1) correlate the use of shaped-closed femoral stem and other perioperative risk factors with severe grade of BCIS grade 2 or 3: BCIS gr2/3, and (2) identify the prevalence of BCIS in the elderly patients with OFNF and treated with CHA. HYPOTHESIS: Large wedge-shaped (or "shape-closed") femoral stem design would significantly associate with BCIS gr2/3 in the elderly patients who sustained OFNF and underwent CHA. PATIENTS AND METHODS: A total of 128 OFNF patients, who aged over 75years and underwent CHA were retrospectively reviewed and then allocated into 2 groups: SC Group (use shape-closed femoral stem, n=40) and FC Group (use force-closed femoral stem, n=88). BCIS was grading in all patients according to Donaldson classification. Perioperative data between the patients with BCIS-gr2/3 and those with BCIS grade 0 or 1 (BCIS-gr0/1) were compared. Multiple logistic regression analysis was used to identify predictive factors for BCIS-gr2/3. RESULTS: The prevalence of overall BCIS and BCIS-gr2/3 was 32.8% (n=42) and 6.2% (n=8), respectively. The total in-hospital and 1-year mortality rates were 2.3% and 4.7%, respectively. The major perioperative complication in patients with BCIS-gr2/3 was significantly higher compared to those in patients with BCIS-gr0/1 (62.5% vs. 10.0%, p=0.001). Multivariate analysis showed that age>90years (OR=9.4, 95% CI: 1.4-62.9, p=0.02), preinjury Parker mobility score<4 (OR=48.8; 95% CI: 2.7-897.2, p=0.008) and shape-closed femoral stem used (OR=19.1; 95% CI: 1.8-204.5, p=0.01) were the significant independent predictors for BCIS-gr2/3 in these patients. CONCLUSION: BCIS in OFNF patients undergoing CHA is common and associates with a high major perioperative complication rate. Our initial hypothesis is validated as the patients at risk for BCIS-gr2/3 are those whose CHA procedures use a shape-closed femoral stem design and with extreme age, and having poor preinjury ambulatory status. Therefore, we recommended using cementless stem as the first option in OFNF. However, if CHA is needed, strict guideline for cement insertion should be followed with force-closed stem application to avoid the risk of BCIS-gr2/3. LEVEL OF EVIDENCE: III; retrospective case-control study.

Additional cuff suture provides mechanical advantage for fixation of split-type greater tuberosity fracture of humerus.

PURPOSE: Split type of greater tuberosity fracture has variety of surgical treatment options. This study aimed to compare the biomechanics property of additional cuff suture and other fracture fixation techniques. METHODS: Fifteen porcine humeri were categorized into three groups of fixation techniques those were proximal humeral internal locking system (PHILOS) plate with 2 cuff sutures, nonlocking (conventional, 3.5 mm) T-plate with 2 cuff sutures and T-plate with washer that had additional cuff suture (novel technique). Fracture was created by greater tuberosity osteotomy with 50˚ inclination to the line of surgical neck and then fixed with different prescribed techniques. Displacement of fracture site was measured with universal testing machine. The maximum forces to produce 3 mm, 5 mm of displacement and load to failure were recorded. RESULTS: The average loads to reach 3 mm, 5 mm displacement and failure were 30.8 N, 45.4 N and 161 N for nonlocking T-plate; 76.6 N, 99.2 N and 144 N for PHILOS plate; 95.8 N, 120 N and 197 N for novel technique. The differences among three groups were significant in load to displacement at 3 and 5 mm (but not significant in load to failure). For load to reach 3- and 5-mm displacement, PHILOS plate and novel technique were significantly stronger than nonlocking T-plate (P < 0.05). For load to reach 3 and 5 mm displacement, novel technique was stronger than PHILOS plate but not significant (P > 0.05). For load to failure, novel technique was stronger than nonlocking plate and PHILOS plate but not significant (P < 0.05). CONCLUSION: The important factors affecting the strength of fracture fixation are type of plate and numbers of suture augmentation that tie to the plate. Fixation with additional cuff suture showed the superior biomechanics of load to reach 3 mm, 5 mm displacement with better load to failure compared with PHILOS plate and conventional T-plate alone.

Exploring barriers to, and enablers of, evidence-informed hip fracture care in five low- middle-income countries: China, India, Thailand, the Philippines and Vietnam.

Globally, populations are ageing and the estimated number of hip fractures will increase from 1.7 million in 1990 to more than 6 million in 2050. The greatest increase in hip fractures is predicted in Low- and Middle-Income Countries (LMICs), largely in the Asia-Pacific region where direct costs are expected to exceed $US15 billion by 2050. The aims of this qualitative study are to identify barriers to, and enablers of, evidence-informed hip fracture care in LMICs, and to determine if the Blue Book standards, developed by the British Orthopaedic Association and British Geriatrics Society to facilitate evidence-informed care of patients with fragility fractures, are applicable to these settings. This study utilized semi-structured interviews with clinical and administrative hospital staff to explore current hip fracture care in LMICs. Transcribed interviews were imported into NVivo 12 and analysed thematically. Interviews were conducted with 35 participants from 11 hospitals in 5 countries. We identified five themes-costs of care and the capacity of patients to pay, timely hospital presentation, competing demands on limited resources, delegation and defined responsibility and utilization of available data-and within each theme, barriers and enablers were distinguished. We found a mismatch between patient needs and provision of recommended hip fracture care, which in LMICs must commence at the time of injury. This study describes clinician and administrator perspectives of the barriers to, and enablers of, high-quality hip fracture care in LMICs; results indicate that initiatives to overcome barriers (in particular, delays to definitive treatment) are required. While the Blue Book offers a starting point for clinicians and administrators looking to provide high-quality hip fracture care to older people in LMICs, locally developed interventions are likely to provide the most successful solutions to improving hip fracture care.

Effectiveness of prophylactic double-looped wiring in cementless Hip arthroplasty: A biomechanical study in osteoporotic bone model using impaction simulation system.

BACKGROUND: Periprosthetic femoral fracture (PFF) is well-known complication in cementless hip arthroplasty (HA), especially in the elderly with osteoporosis. To prevent intraoperative PFFs during HA, prophylactic cerclage wiring on the calcar area during femoral broaching and implant insertion is recommended. However, biomechanical data on the benefits of cerclage wiring in osteoporotic bone during impaction are limited and controversial. This study aimed to assess the efficacy of prophylactic double-looped cerclage wiring (PDLCW) during femoral broaching in the osteoporotic bone model with an impaction simulation system. METHODS: Fifteen osteoporotic femur models were prepared and allocated to three groups; control group (no cerclage), PW group (received PDLCW), and CC+PW group (prepared as having calcar crack and received PDLCW). All femurs were broached under impaction force that sequentially increased until the visible fracture or calcar crack propagation was visible. The primary outcomes were mallet impaction force (MIF-CF) and mallet velocity (MV-CF) at the time of calcar fracture. The secondary outcomes were calcar fracture pattern and subsidence during calcar fracture (S-CF). RESULTS: PW group showed a significant increase in average MIF-CF, by 40.4% and 120.2% (p<0.001) compared to the control and CC+PW groups, respectively. The average MV-CF in PW group was also significantly greater, 13.1% and 64.6% (p<0.001), compared to the control and CC+PW groups, respectively. Control group revealed significantly greater incidence of complete calcar fracture (60% vs. 0% vs. 0%, p = 0.024), and the highest S-CF compared to those in the PW and CC+PW groups (10.6 ±â€¯6.0 mm, 6.7 ±â€¯4.4 mm, and 1.3 ±â€¯2.0 mm, p = 0.020). CONCLUSIONS: This study showed that PDLCW significantly improved hoop stress resistance by increasing the calcar fracture threshold related to mallet impaction, decreasing the risk of complete calcar fracture.

Predicting surgical factors for unplanned overnight admission in ambulatory arthroscopic surgery of the knee: a prospective cohort in one hundred and eighty four patients.

PURPOSE: Unplanned overnight admission (UOA) is an important indicator for quality of care with ambulatory knee arthroscopic surgery (AKAS). However, few studies have explored the factors related to the UOA and how to predict UOA after AKAS. This study aimed to evaluate the effectiveness of a standardized peri-operative protocol for the AKAS and identify whether a correlation exists between the peri-operative surgical factors and UOA in the patients undergoing AKAS. We hypothesized that more surgical invasiveness and prolong tourniquet time increase the risk of UOA after AKAS. METHOD: A prospective cohort study was conducted between October 2017 and March 2021. All 184 patients operated on standard AKAS protocol. The UOA is defined as overnight hospitalization of a patient undergoing AKAS. Demographic and peri-operative data were recorded, and the procedure was categorized based on the surgical invasiveness based on less invasive (intra-articular soft tissue surgery) (n = 65) and more complex surgery (involving extra-articular soft tissue surgery or ligamentous reconstruction) (n = 119). The clinical risk factors for UOA were identified and analyzed with multivariate analysis. RESULTS: The incidence of UOA in the more complex group (n = 7, 14.3%) was significantly higher than in the less invasive group (n = 3, 4.6%) (p = 0.049). The peri-operative factors significantly associated with UOA were age, more complex surgery, and longer tourniquet time (p < 0.10 all). However, the multivariate analysis revealed that longer tourniquet time was the only significant predictor for UOA (OR = 1.045, 95% CI = 1.022-1.067, p = 0.0001). The optimal cut-off points of tourniquet time for predicting UOA with the highest Youden index in the less invasive and more complex groups were 56 minutes and 107 minutes, respectively. CONCLUSION: The UOA after AKAS is more common in more complex surgery compared to less invasive surgery. This study showed that unplanned admission significantly associated with many factors-as patient factors, surgical invasiveness, and tourniquet time. However, tourniquet time is the only independent predictor for UOA. Therefore, strict perioperative management protocol must be applied in AKAS, and all patients having these risk factors should be prepared for UOA.

Atypical Periprosthetic Femoral Fracture Associated With Prolonged Bisphosphonate Therapy: A Two-Centered Retrospective Case Series and Literature Review.

To date, atypical periprosthetic femoral fractures (APFFs) are not well-understood due to a relatively small number of studies on the topic. Moreover, there is a paucity of guidance regarding the appropriate treatment strategy. We would therefore like to present and analyze a series of five APFF cases (one incomplete APFF and four complete APFFs) that were treated in two university hospitals; a review of the literature is also provided. The results provide additional and useful information regarding the treatment strategy for APFFs.

Development of prediction model for osteoporotic vertebral compression fracture screening without using clinical risk factors, compared with FRAX and other previous models.

This study developed a prediction model to assess the need for asymptomatic osteoporotic vertebral compression fracture (OVCF) screening in women without using clinical risk factors. Our results demonstrated that the combination of age, height loss, and femoral neck T-score can predict OVCF comparable to previous models, including FRAX. PURPOSE: Osteoporotic vertebral compression fracture (OVCF) is a major fracture in osteoporosis patients. Early detection of OVCF can reduce the risk of subsequent fractures and death. Many existing diagnostic tools can screen for the risk of osteoporotic fracture but none aim to identify OVCF. The objective of this research is to study a predictive model for capturing OVCF and compare it with previous models. METHODS: A retrospective review was conducted that included women aged ≥ 50 years who underwent dual-energy X-ray absorptiometry and vertebral fracture screening between 2012 and 2019. The data included age, height, weight, history of height loss (HHL), and bone mass density (BMD). Receiver operating characteristic analysis and univariate and multivariate logistic regression were performed. The predictive OVCF model was formulated, and the result was compared to other models. RESULTS: A total of 617 women, a 179 of which had OVCFs, were eligible for analysis. Multivariate regression analysis showed age > 65, height loss > 1.5 cm, and femoral neck T-score < -1.7 as independent risk factors for OVCF. This model revealed comparable performance with FRAX. The model without BMD revealed superior performance to FRAX and other standard osteoporosis assessment models. CONCLUSIONS: BMD and vertebral fracture screening should be eligible for individual women age > 65 years with an HHL more than 1.5 cm, regardless of BMD. Vertebral fracture assessment should be additionally conducted on these women with a femoral neck T-score less than -1.7.

Three-dimensional printing technology for patient-matched instrument in treatment of cubitus varus deformity: A case report.

BACKGROUND: Recently, medical three-dimensional printing technology (3DPT) has demonstrated potential benefits for the treatment of cubitus varus deformity (CVD) by improving accuracy of the osteotomy through the use of an osteotomy guide, with or without a patient-mated plate. Here, we present an interesting CVD case, involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT. CASE SUMMARY: A 32-year-old female presented with a significant CVD from childhood injury. A computer simulation was processed using images from computerized tomography scans of both upper extremities. The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus. Next, the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed. A simulation osteotomy was created for the real-sized bone model, and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy. Our method allowed for successful treatment of the CVD case, significantly improving the patient's radiographic and clinical outcomes, with satisfactory result. CONCLUSION: 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.

Is continuous locking suture with braided suture sufficient for arthrotomy repair in the conventional TKR? A randomized controlled trial study.

INTRODUCTION: Medial-parapatellar-arthrotomy is the standard approach for total knee replacement(TKR). No studies have clarified the outcomes as quadriceps-strength-recovery (QS) and safety of Continuous-locking-suture-technique(CLS) for the arthrotomy-repair. METHODS: Patients were randomly assigned into a CLS(n = 40) and an interrupted-horizontal-mattress(IHM, n = 40). QS, visual-analog-scale(VAS), modified-timed-up-and-go(TUGT) test, Western-Ontario-and McMasters-Universities-Osteoarthritis-Index[WOMAC] and Knee-Society-Score[KSS] were followed for 6 months'. RESULTS: A significantly-shorter capsular-closure-time in CLS(233 ± 40 VS 388 ± 47 sec)(p < 0.0001). There were insignificant difference in QS, VAS, TUGT, WOMAC and KSS during the 6-month follow-up period(p > 0.05 all). No wound complications were found. CONCLUSION: CLS with braided-suture is safe and effective as demonstrated a recovery of the QS and knee function outcome comparable to IHM. TRIAL REGISTRATION: This study was registered in Thai Clinical Trials Registry on December 2015 (https://www.clinicaltrials.in.th). The registration number was TCTR20151208003.

Efficacy of Periarticular Multimodal Drug Injection Without NSAIDs in Elderly Patients With Displaced Femoral Neck Fractures Undergoing Bipolar Hemiarthroplasty: A Prospective Triple-Blinded RCT.

Introduction Recently, periarticular multimodal drug injection (PMDI) has demonstrated the ability to significantly reduce early postoperative pain with hip fractures in the elderly. Nonetheless, data on PMDI without non-steroidal anti-inflammatory drugs (NSAIDs) in these patients are still doubtful. The current study has evaluated the effect of PMDI with NSAIDs in elderly femoral neck fractures (FNFs) underlying bipolar hip arthroplasty (BHA). Materials and methods A prospective triple-blinded randomized controlled trial (RCT) was conducted in 28 elderly FNFs undergoing BHA. They were randomized into two groups: PMDI group (n=14), which received intraoperative PMDI (50-mL solution of 100-mg bupivacaine, 10-mg morphine, 300-mcg epinephrine, and 750-mg cefuroxime), and a placebo group (n=14), which received only saline solution. The primary outcome was a 10-point visual analog scale (VAS). Secondary outcomes were morphine consumption and cumulative ambulatory score (CAS), postoperative complications, and functional outcomes as a timed up-and-go (TUG) test and Harris hip score (HHS) at two, six, and 12 weeks postoperatively. Results The PMDI group demonstrated a significant reduction in the median VAS at the 48th hour postoperatively as compared to the placebo group (P = 0.019), and a non-significant reduction in the median VAS at the 36th and 60th hours (P = 0.058 and 0.110, respectively) and in a median dosage of morphine consumption on the second postoperative day (P = 0.140). There was no significant difference in postoperative ambulation and functional outcome between both groups (P > 0.05, all). Conclusion The PMDI regimen without NSAIDs is effective for postoperative analgesia on the second postoperative day in elderly FNFs undergoing BHA without any significant difference in functional outcome or postoperative complications.

Effectiveness of a Simple Auditory Feedback Insole (Sim-Insole) for Touchdown Weight-Bearing Training in At-Risk Volunteers with Poor Compliance: A Crossover Study.

INTRODUCTION: Recent studies have shown that biofeedback devices are effective for weight-bearing (WB) training. However, these devices have limitations due to high costs and inadequate evidence of their effectiveness among poor-compliance individuals. This study aimed to assess WB compliance after touchdown weight-bearing (TDWB) training by the standard bathroom scale (BS) method and to evaluate the efficacy of our innovative simple auditory feedback device (Sim-Insole). METHODS: In this crossover study, healthy volunteers were trained for TDWB (targeting 20% of bodyweight [BW]) with the BS method and assessed with the Sim-Insole without feedback (phase 1), and then completed a 30-min wash-out period and underwent re-assessment with Sim-Insole with feedback (phase 2). Satisfaction was evaluated with a self-assessment questionnaire. Those who had and had not experienced a weight-bearing force (WBF) >25% of BW were classified as high-risk and low-risk groups, respectively. Steps with percentage of WB &15%, 15%-25%, and >25% were defined as under-zone, in-zone, and over-zone, respectively. RESULTS: Fourteen volunteers (70%) were classified as high-risk after the BS method. Without auditory feedback, the high-risk group demonstrated a significantly higher average percentage of WB and higher average lowest WBF compared to the low-risk group (18.8% vs. 13.7% and 74.3N vs. 60.2N, respectively, p=0.002 for both). With the use of auditory feedback with Sim-Insole in the high-risk group, the cadence, percentage of WB, highest absolute WBF, proportion of over-zone step, and confidence for TDWB improved significantly compared to those with the BS method (p&0.05 for all). However, the low-risk group showed only a significant improvement in cadence (p=0.047) and a non-significant trend for improvement in the percentage of WB (p=0.089), compared to the BS method. CONCLUSION: Sim-Insole is effective for TDWB training. This device significantly improved WB compliance with regard to excessive WB, walking speed, and the confidence of volunteers in the high-risk group with poor compliance.

Reliability and Correlation of the Force-PRO Device and Computer-Assisted Navigation System for Measurement of Acetabular Cup Position in Total Hip Arthroplasty.

INTRODUCTION: Acetabular cup malposition is very common in total hip arthroplasty (THA) and is significantly associated with many serious postoperative complications, such as dislocation, wear and loosening, and decreased range of motion. To improve the accuracy of intraoperative assessment, we recently developed an innovative sensor-based navigation system (Force-PRO device) using an inertial measurement unit and a 3D-printed liner for acetabular cup measurement, and aimed to evaluate its reliability and correlate its accuracy with that of a computer-assisted navigation system (CANS). DESIGN: Method-comparison study between the Force-PRO device and a standard CANS in a 1:1 pelvic bone model. METHODS: The test-retest reliability of both the Force-PRO device and CANS, and agreement between the Force-PRO device and CANS, for the measurement of acetabular inclination and anteversion angles, were examined using 40 random acetabular cup positions. Statistical analysis was performed by using limits of agreement and intraclass correlation coefficient (ICC). RESULTS: The mean differences in the inclination angle and anteversion angle in test-retest of the Force-PRO device were -0.43°±1.03° and -0.40°±0.78°, respectively. The mean differences in the inclination angle and anteversion angle between the Force-PRO device and CANS were 0.70°±0.94° and -0.10°±0.44°, respectively. Excellent reliability in the inclination and anteversion angles of the Force-PRO device and excellent agreement between the Force-PRO device and CANS were demonstrated, with ICC values of 0.994 and 0.997, and 0.993 and 0.999, respectively. CONCLUSION: The Force-PRO device showed excellent reliability equivalent to CANS with excellent agreement in acetabular cup position measurement comparable to that with CANS. Future clinical studies will be needed to evaluate the efficacy of this device.

Predicting Factors for Return to Prefracture Ambulatory Level in High Surgical Risk Elderly Patients Sustained Intertrochanteric Fracture and Treated With Proximal Femoral Nail Antirotation (PFNA) With and Without Cement Augmentation.

INTRODUCTION: Postoperative outcomes in the elderly patients with intertrochanteric fracture were generally poor with a low rate of return to prefracture ambulatory level (RPAL). Recent studies showed that proximal femoral nail antirotation (PFNA) with cement augmentation might be useful for postoperative functional recovery. This study aimed to compare the outcomes in elderly patients with high surgical risk, American Society of Anesthesiologist (ASA) grade 3 or 4, who sustained intertrochanteric fractures and were treated with PFNA with and without cement augmentation, and to correlate perioperative surgical factors with the RPAL. METHODS: A retrospective consecutive series was conducted based on 135 patients with prefracture ambulation classified as independent in community with or without a single cane (68 in augmented group and 67 in control group). Perioperative data and data on the complications within 1-year postsurgery were collected and compared. Predictive factors for RPAL were analyzed via logistic regression analysis. RESULTS: The overall 1-year postoperative mortality rate was 10% (n = 14) with no significant difference between groups (P = .273). The proportion of elderly patients with RPAL in the augmented group was significantly higher than for those in the control group (48% vs 29%, P = .043). Via univariate analysis, ASA grade 4 (P = .077), history of stroke (P = .035), and use of cement augmentation (P = .041) were correlated with RPAL. However, multivariate regression analysis showed that ASA grade 4 (odds ratio [OR] = 0.40, 95% confidence interval [CI]: 0.18-0.90, P = .026) and use of cement augmentation (OR = 2.72, 95% CI: 1.22-6.05, P = .014) were the significant predictors for RPAL. DISCUSSION AND CONCLUSIONS: The results of the present study showed that PFNA with cement augmentation is safe and effectiveness in the intertrochanteric fracture treatment of elderly. Postoperative functional recovery, like RPAL, in elderly patients who sustained intertrochanteric fractures is relatively low, especially in those with ASA grade 4. However, cement augmentation with PFNA might be helpful for increasing the RPAL in high-surgical-risk geriatric patients.

Comparison of fracture healing and long-term patient-reported functional outcome between dorsal and volar plating for AO C3-type distal radius fractures.

PURPOSE: This study aimed to evaluate the differences in long-term functional outcome and radiographic fracture healing between volar and dorsally approached comminuted intra-articular distal radius fractures (DRF) (AO C3-type). METHODS: A retrospective, age-matched, case-control study with a 1:2 allocation ratio was conducted in 84 patients C3-type DRFs patients who underwent either dorsal locking plating (DLP) group (n = 28) or volar locking plating (VLP) group (n = 56). Standardized wrist radiographs (posterior-anterior and 15° lateral) were assessed immediately postoperative and at final follow. To evaluate for loss of reduction standard radiographic measurements were performed. Fracture healing was assessed radiologically. Patient-reported outcomes were assessed with the patient-related wrist evaluation and the EQ-5D-3L for health-related quality of life. Patient satisfaction was assessed with the use of a numeric analog scale ranging from 0 (not satisfied) to 100 (very satisfied). RESULTS: All fractures united within 3 months postoperatively. Average age was 59 ± 12 years. Fifty-five patients (66%) participated in the follow-up survey at an average of 76.6 ± 23.8 months. DLP group showed a significant change in sagittal tilt compared with VLP group (3.4 ± 3.0° vs - 0.4 ± 4.1°, p < 0.001). No significant difference in other radiographic and long-term functional outcome was found between both groups (p > 0.05). CONCLUSION: Dorsal locking plating fixation in C3-type DRFs resulted in a minimal, but statistically significant, volar collapse of sagittal tilt compared with volar locking plating fixation. However, this difference in volar collapse did not significantly influence the long-term clinical outcome.

Innovative Force-PRO device to measure force and implant position in total hip arthroplasty.

Total hip arthroplasty (THA) is the appropriate treatment for hip pain, dislocation, and dysfunction. THA refers to surgery to replace a hip implant, which is an effective way to recover normal hip function. The design of an implant imitates hip functions and allows bone growth in the implant area. However, it should be noted that the implant can dislocate after surgery. The main factor that should be considered during surgery is the correct position of the implant component. The acetabular cup of the hip implant should be positioned at [Formula: see text] anteversion and [Formula: see text] inclination. The evaluation of the implant inclination and anteversion during the operation decrease the risk of the implant dislocation after surgery. Developing a new innovative Force-PRO device can aid the doctor in evaluating the force on the surface of the acetabular liner and the angle of the acetabular liner during the hip implant operation. This device consists of two main sensors-force sensors and inertial measurement unit sensors. Furthermore, the 3D printings of an implant's parts should be specifically designed to integrate with these sensors. To develop the graphical user interface application, C[Formula: see text] should be the programming language of use. The graphical user interface application communicates between the device and user via a wireless communication system. CT-based imaging and force gauge measurement are the methods to evaluate the efficiency of this device. For this purpose, the sterile method is considered.

Finite element analysis comparison between superior clavicle locking plate with and without screw holes above fracture zone in midshaft clavicular fracture.

BACKGROUND: Midshaft clavicular fractures are common fractures and generally treated conservatively. Among the surgical options, plate fixation is the most popular and has been biomechanically and clinically proven in numerous studies. However, implant failures caused by plate deformations or breakage still occur in up to 16.7% of cases, and recent studies showed that screw holes above fracture zone (SHFZ) might be the at-risk location. Using finite element analysis, this study aimed to test the biomechanical property of the superior clavicle locking plate (SCLP) with and without SHFZ in comminuted midshaft clavicular fracture. METHODS: Finite element models of comminuted midshaft clavicular fracture fixed with standard 8-hole titanium SCLP with screw holes (SHFZ plate) and without screw holes above fracture zone (No-SHFZ plate) were built. Both groups were tested under three different loading models (100-N cantilever bending, 100-N axial compression, and 1-Nm torsion). The average peak stress on medial clavicle, fracture zone, and lateral clavicle, and the peak stress on each screw hole (or the same position in the No-SHFZ plate) were measured and compared. RESULTS: The highest average peak stress on the fracture zone was higher than those on medial and lateral clavicles under all loading conditions in both plates. However, the No-SHFZ plate significantly reduced the average peak stress value on the fracture zone, compared to the SHFZ plate (45.0% reduction in cantilever bending, 52.2% reduction in axial compression, and 54.9% reduction in axial torsion). The peak stress value on the maximal stress point in the SHFZ and No-SHFZ plates with cantilever bending, axial compression, and torsion loads were 1257.10 MPa vs. 647.21 MPa, 186.42 MPa vs. 131.63 MPa, and 111.86 MPa vs. 82.41 MPa, respectively. CONCLUSION: The weakest link of the SCLP construct in comminuted midshaft clavicular fracture fixation is the SHFZ, especially in the cantilever bending load. Additionally, the biomechanical property of the SCLP without SHFZ model (No-SHFZ plate) is superior to the standard SCLP model (SHFZ plate), with a significantly lower peak stress on the SHFZ location in all loading conditions. We recommend a new SCLP design with SHFZ to prevent implant failure and improve surgical outcomes.

Correlation between perioperative surgical factors and complications after hip arthroplasty, as a salvage procedure, following failure of internal fixation of osteoporotic intertrochanteric fractures.

BACKGROUND AND PURPOSE: Salvage hip arthroplasty (SHA) in patients presenting with failed internal fixation after intertrochanteric fracture (FIF-ITFx) is a difficult procedure, and the incidence of perioperative mortality and complications following SHA are high. To our knowledge, no information related to the correlation between perioperative surgical factors and post-SHA perioperative complications in these patients has been demonstrated. This study aimed to identify the predictive factors for post-SHA perioperative complications in patients with FIF-ITFx. MATERIALS AND METHODS: A total of 32 patients with FIF-ITFx who underwent SHA between 2010 and 2017 were retrospectively reviewed. All patients had been followed for 1 year post-operatively. Perioperative data and complication details related to fracture and treatment were collected. Predictive factors for post-SHA perioperative complications were analyzed via logistic regression analysis. RESULTS: Two (6%) patients died after SHA during the admission period. Perioperative complications were found in 16 (50%) patients, including surgical (n=3, 9%) and medical (n=15, 47%) complications, respectively. By univariate analysis, age (P=0.043), American Society of Anesthesiologist (ASA) grade 4 (P=0.016), Charlson Comorbidity Index (CCI; P=0.014), lymphocyte cell count (P=0.064), and serum albumin level (P=0.146) were correlated with the perioperative complications. However, multivariate regression analysis showed that CCI was the only significant independent predictor for post-SHA perioperative complications in these patients (OR=1.87; 95% CI, 1.14-2.07, P=0.014). CONCLUSION: Our study showed that post-SHA perioperative complications in patients with FIF-ITFx are very common and predictable with a simple preoperative factor CCI. Therefore, special perioperative attention must be paid to patients with FIF-ITFx undergoing SHA and having multiple severe comorbid diseases or high CCI.