Fungal-mediated synthesis of silver nanoparticles: a novel strategy for plant disease management.

Various traditional management techniques are employed to control plant diseases caused by bacteria and fungi. However, due to their drawbacks and adverse environmental effects, there is a shift toward employing more eco-friendly methods that are less harmful to the environment and human health. The main aim of the study was to biosynthesize silver Nanoparticles (AgNPs) from Rhizoctonia solani and Cladosporium cladosporioides using a green approach and to test the antimycotic activity of these biosynthesized AgNPs against a variety of pathogenic fungi. The characterization of samples was done by using UV-visible spectroscopy, SEM (scanning electron microscopy), FTIR (fourier transmission infrared spectroscopy), and XRD (X-ray diffractometry). During the study, the presence of strong plasmon absorbance bands at 420 and 450 nm confirmed the AgNPs biosynthesis by the fungi Rhizoctonia solani and Cladosporium cladosporioides. The biosynthesized AgNPs were 80-100 nm in size, asymmetrical in shape and became spherical to sub-spherical when aggregated. Assessment of the antifungal activity of the silver nanoparticles against various plant pathogenic fungi was carried out by agar well diffusion assay. Different concentration of AgNPs, 5 mg/mL 10 mg/mL and 15 mg/mL were tested to know the inhibitory effect of fungal plant pathogens viz. Aspergillus flavus, Penicillium citrinum, Fusarium oxysporum, Fusarium metavorans, and Aspergillus aflatoxiformans. However, 15 mg/mL concentration of the AgNPs showed excellent inhibitory activity against all tested fungal pathogens. Thus, the obtained results clearly suggest that silver nanoparticles may have important applications in controlling various plant diseases caused by fungi.

Green synthesis of zinc oxide nanoparticles (ZnO-NPs) by Streptomyces baarnensis and its active metabolite (Ka): a promising combination against multidrug-resistant ESKAPE pathogens and cytotoxicity.

Various eco-friendly techniques are being researched for synthesizing ZnO-NPs, known for their bioactivity. This study aimed at biosynthesizing ZnO-NPs using Streptomyces baarnensis MH-133, characterizing their physicochemical properties, investigating antibacterial activity, and enhancement of their efficacy by combining them with a water-insoluble active compound (Ka) in a nanoemulsion form. Ka is a pure compound of 9-Ethyl-1,4,6,9,10-pentahydroxy-7,8,9,10-tetrahydrotetracene-5,12-dione obtained previously from our strain of Streptomyces baarnensis MH-133. Biosynthesized ZnO-NPs employing Streptomyces baarnensis MH-133 filtrate and zinc sulfate (ZnSO4.7H2O) as a precursor were purified and characterized by physicochemical investigation. High-resolution-transmission electron microscopy (HR-TEM) verified the effective biosynthesis of ZnO-NPs (size < 12 nm), whereas dynamic light scattering (DLS) analysis showed an average size of 17.5 nm. X-ray diffraction (XRD) exhibited characteristic diffraction patterns that confirmed crystalline structure. ZnO-NPs efficiently inhibited both Gram-positive and Gram-negative bacteria (MICs: 31.25-125 µg/ml). The pure compound (Ka) was combined with ZnO-NPs to improve effectiveness and reduce dose using checkerboard microdilution. Niteen treatments of Ka and ZnO-NPs combinations obtained by checkerboard matrix inhibited Klebsiella pneumonia. Eleven combinations had fractional inhibitory concentration index (FICi) between 1.03 and 2, meaning indifferent, another five combinations resulted from additive FICi (0.625-1) and only one combination with FICi of 0.5, indicating synergy. In the case of methicillin-resistant S. aureus (MRSA), Ka-ZnO-NPs combinations yielded 23 treatments with varying degrees of interaction. The results showed eleven treatments with indifferent interaction, eight additive interactions, and two synergies with FICi of 0.5 and 0.375. The combinations that exhibited synergy action were transformed into a nanoemulsion form to improve their solubility and bioavailability. The HR-TEM analysis of the nanoemulsion revealed spherical oil particles with a granulated core smaller than 200 nm and no signs of aggregation. Effective dispersion was confirmed by DLS analysis which indicated that Ka-ZnO-NPs nanoemulsion droplets have an average size of 53.1 nm and a polydispersity index (PI) of 0.523. The killing kinetic assay assessed the viability of methicillin-resistant Staphylococcus aureus (MRSA) and K. pneumonia post-treatment with Ka-ZnO-NPs combinations either in non-formulated or nanoemulsion form. Results showed Ka-ZnO-NPs combinations show concentration and time-dependent manner, with higher efficacy in nanoemulsion form. The findings indicated that Ka-ZnO-NPs without formulation at MIC values killed K. pneumonia after 24 h but not MRSA. Our nanoemulsion loaded with the previously mentioned combinations at MIC value showed bactericidal effect at MIC concentration of Ka-ZnO-NPs combination after 12 and 18 h of incubation against MRSA and K. pneumonia, respectively, compared to free combinations. At half MIC value, nanoemulsion increased the activity of the combinations to cause a bacteriostatic effect on MRSA and K. pneumonia after 24 h of incubation. The free combination showed a bacteriostatic impact for 6 h before the bacteria regrew to increase log10 colony forming unit (CFU)/ml over the initial level. Similarly, the cytotoxicity study revealed that the combination in nanoemulsion form decreased the cytotoxicity against kidney epithelial cells of the African green monkey (VERO) cell line. The IC50 for Ka-ZnO-NPs non-formulated treatment was 8.17/1.69 (µg/µg)/ml, but in nano-emulsion, it was 22.94 + 4.77 (µg/µg)/mL. In conclusion, efficient Ka-ZnO-NPs nanoemulsion may be a promising solution for the fighting of ESKAPE pathogenic bacteria according to antibacterial activity and low toxicity.

Incorporating Technology Adoption in Medical Education: A Qualitative Study of Medical Students' Perspectives.

Introduction: The integration of technology into medical education has witnessed significant growth in recent years, with tools such as virtual reality, artificial intelligence, and telemedicine gaining prominence. These tool in medical education, offering immersive, experiential learning experiences. Methods: We approached medical students currently enrolled in medical education programs and who are familiar with and actively use AI in medical education. Initially, we invited 21 random students to participate in the study; however, only 13 agreed to interviews. Some students cited their busy exam schedules as the reason for not participating. The participants were informed of the objective of the study before the commencement of the recorded interviews. Semi-structured interviews were used to guide the record interviews. Audio recordings were transcribed and analyzed using Atlas.ti, a qualitative data analysis software. Results: Participants exhibited a diverse range of perceptions and levels of awareness regarding VR, AI, and telemedicine technologies. Learning with virtual reality was considered to be fun, memorable, inclusive, and engaging by participants. The use of virtual reality technology is seen as complementing current teaching and learning approaches, helping to build learners' confidence, as well as providing medical students with a safe environment for problem-solving and trial-and-error learning. The students reported that AI was seen as a potential game-changer in the healthcare sector. Participants hoped that telemedicine would provide healthcare services to remote and underserved populations. Conclusion: The study conducted focus group discussions with medical students and residents in Saudi Arabia to explore their views on integrating VR, AI, and telemedicine in medical education and practice. Their insights highlight the need for informed decision-making and strategic development to optimize the benefits and address challenges like initial investments, technical issues, ethics, and regulations. These considerations are crucial for fully realizing the potential benefits of technology in medical education globally.

Removal of pollutants through photocatalysis, adsorption, and electrochemical sensing by a unique plasmonic structure of palladium and strontium oxide nanoparticles sandwiched between 2D nanolayers.

The redesigned engineering building of nanocomposite (NCP) depends on metal oxides of palladium oxide (PdO) nanoparticles (NPs) conjugate with the n-type semiconductor of strontium oxide (SrO) NPs on the electron carrier surface of graphene oxide (GO) and reduce graphene oxide (rGO) nanosheet is the main target of the current work. The low efficiency of PdO (n-type) and SrO (p-type) gave an overview of the increasing generation electron efficiency via building the ohmic area on the GO and rGO surface using the Z-scheme mechanism. The efficiency of the NCP surface for destroying organic pollutants such as mixed dyes of Rhodamine B and methylene blue (RhB/MB), as against insecticides like imidacloprid, and the removal of heavy metals such as chromium ions was studied. The production of clean water against pollutants materials was investigated through adsorption and photocatalytic processes, electrochemical, and spectroscopy methods to detect the activity of NCP. The rate constant of the adsorption pollutants is 0.1776 min-1 (MB), 0.3489 min-1 (RhB), 0.3627 min-1 (imidacloprid), and 0.5729 min-1 (Cr3+). The photocatalytic rate recorded at 0.01218 min-1 (MB), 0.0096 min-1 (RhB), appeared degradation rate at 0.0086 min-1 (imidacloprid), 0.0019 min-1 (Cr6+), and 0.0471 min-1 (Cr3+). The adsorption and photocatalytic efficiency of nanocatalyst (NCP) was calculated at 91% (RhB), 93% (MB), 73% (imidacloprid), 63% (Cr3+), while the photocatalytic efficiency is 63% (RhB), 94% (MB), 86% (imidacloprid), 33% (Cr3+). The recyclability of NCP was tested for five cycles, and the efficiency was discovered at 55% after the fifth cycle. The cytotoxicity of NCP was studied to detect the safety of the fabricated materials. The study validates that the fabricated nanocomposite exhibits great potential as an innovative material for producing clean water.

Promising Therapeutic Targets for Recurrent/Metastatic Anaplastic Thyroid Cancer.

OPINION STATEMENT: Anaplastic thyroid cancer presents formidable challenges, particularly in cases of recurrence or metastasis. Timely BRAF V600E testing is imperative at diagnosis, initially through immunohistochemistry, followed by comprehensive genomic profiling encompassing genes such as NTRK, RET, ALK, and assessment of tumor mutation burden (TMB). FDA-approved treatment options include dabrafenib and trametinib for patients with BRAF mutations, while those exhibiting high TMB may benefit from pembrolizumab. Further therapeutic decisions hinge upon mutational profile, urgency of response required, airway integrity, and access to targeted therapies There is growing use of immunotherapy for ATC based on published reports of activity, but currently there is no FDA approved agent for ATC. The off-label utilization of "precision medicine" combinations imposes a considerable financial strain, underscoring the necessity for further clinical trials to elucidate promising therapeutic avenues for this orphan disease. There is a pressing need for the development and support of clinical trials investigating genomically driven and immune-based therapies for anaplastic thyroid cancer.

Prevalence of apical periodontitis and quality of root canal treatment in an adult Kuwaiti sub-population: a cross-sectional study.

Objectives: This cross-sectional study evaluated the prevalence of apical periodontitis (AP) and the technical quality of root canal fillings in an adult Kuwaiti subpopulation using cone-beam computed tomography (CBCT) images. Materials and Methods: Two experienced examiners analyzed 250 CBCT images obtained from Kuwaiti patients aged 15-65 years who attended government dental specialist clinics between January 2019 and September 2020. The assessment followed the radiographic scoring criteria proposed by De Moor for periapical status and the technical quality of root canal filling. Chi-square and Fisher's exact tests were used for statistical analysis, with significance level set at p < 0.05. Results: Among the 2,762 examined teeth, 191 (6.91%) exhibited radiographic signs of AP, and 176 (6.37%) had undergone root canal filling. AP prevalence in root canal-treated teeth was 32.38%, with a significant difference between males and females. Most of the endodontically treated teeth exhibited adequate root canal filling (71.5%). Conclusions: The study demonstrated a comparable prevalence of AP and satisfactory execution of root canal treatment compared to similar studies in different countries.

Open Surgical Excision of Dorsal Wrist Ganglia: Puncturing the Dome Reduces Surgery Time.

Background: The following study is retrospective and compared the operative time and complications using two techniques of surgical resection of primary dorsal wrist ganglia in adults. Methods: Surgery was performed by the senior author (M.M.A.) through a transverse skin incision. The dome of the ganglion is dissected in both techniques. In the first technique (group A patients, n = 20 patients), dissection is continued to the base of the ganglion to reach the stalk near the scapho-lunate ligament. The stalk is transected and cauterized near the ligament. This surgical technique has been practiced by the senior author for 25 years. Over the last 5 years, the author has modified the technique (group B patients, n = 20 patients) by puncturing the dome of the ganglion following dome dissection. About two-thirds of the content of the ganglion is removed, and a mosquito is then used to close the puncture site. Dissection of the base of the ganglion to the stalk becomes easier and quicker, and the stalk is transected and cauterized near the scapho-lunate ligament. Results: There was one recurrence in each group. Other complications were not seen in either group. The mean operative time (SD) was 30.75 (SD = 2.98) minutes for group A; and 20.75 (SD = 2.25) minutes for group B. An independent-samples t test was used to compare the operative time of both groups, which showed the difference was statistically significant (P < 0.001). Conclusions: Our study showed that intentionally puncturing the dome of the ganglion makes the dissection of the base quicker, without increasing the risk of complications.

Colloidal interactions between nanochitin and surfactants: Connecting micro- and macroscopic properties by isothermal titration calorimetry and rheology.

This study elucidates the intricate interactions between chitin nanocrystals (ChNC) and surfactants of same hydrophobic tail (C12) but different head groups types (anionic, cationic, nonionic): sodium dodecyl sulfate (SDS), dodecyltrimethylammonium bromide (DTAB), and polyoxyethylene(23)lauryl ether (Brij-35). Isothermal Titration Calorimetry (ITC) and rheology are used to study the complex ChNC-surfactant interactions in aqueous media, affected by adsorption, self-assembly and micellization. The ITC results demonstrate that the surfactant head group significantly influences the dynamics and nature of the involved phenomena. Cationic DTAB's reveal minimal interaction with ChNC, non-ionic Brij-25's interact moderately at low concentrations driven by hydrophobic effects while SDS's interacts strongly and show complex interaction patterns that fall across four distinct regimes with SDS addition. We attribute such behavior to initiate through electrostatic attraction and terminate in surfactant micelle formation on ChNC surfaces. ITC also elucidates the impact of ChNC concentration on key parameters including critical aggregation concentration (CAC) and saturation concentration (C2). Dynamic rheological analysis indicates the molecular interactions translate to non-linear variations in the elastic modulus (G') upon SDS addition mirroring that observed in ITC experiments. Such a direct correlation between molecular interactions and macroscopic rheological properties provides insights to aid in the creation of nanocomposites with tailored properties.

Structural Health Monitoring of Fiber Reinforced Composites Using Integrated a Linear Capacitance Based Sensor.

The demand for fiber-reinforced polymers (FRPs) has significantly increased in various industries due to their attributes, including low weight, high strength, corrosion resistance, and cost-efficiency. Nevertheless, FRPs, such as glass and Kevlar fiber composites, exhibit anisotropic properties and relatively low interlaminar strength, rendering them susceptible to undetected damage. The integration of real-time damage detection processes can effectively mitigate this issue. This paper introduces a novel method for fabricating embedded capacitive sensors within FRPs using a coating technique. The study encompasses two types of fibers, namely glass and Kevlar fiber/epoxy composites. The physical vapor deposition (PVD) technique is employed to coat bundle fibers with conductive material, thus creating embedded electrodes. The results demonstrate the uniform distribution of nanoparticles of gold (Au) along the fibers using PVD, resulting in a favorable resistance of approximately ≈100 Ω. Two sensor configurations are explored: axial and lateral embedding of the coated yarn (electrodes) to investigate the influence of load direction on the coating yarn. Axial-sensor configuration specimens undergo tensile testing, showcasing a linear response to axial loads with average sensitivities of 1 for glass and 1.5 for Kevlar fiber/epoxy composites. Additionally, onset damage is detected in both types of fiber composites, occurring before final fracture, with average stress at the turning point measuring 208 MPa for glass and 144 MPa for Kevlar. The lateral-sensor configuration for glass fiber-reinforced polymer (GFRP) exhibits good linearity towards strain until failure, with average gauge factors of 0.25 and -2.44 in the x and y axes, respectively.

Designing a MOF-functionalized Nanofibrous Aerogel via Vapor-Phase Synthesis.

Designing 3D mechanically robust and high-surface-area substrates for uniform and high-density deposition of metal-organic frameworks (MOFs) provide a promising strategy to enhance surface accessibility and application of these highly functional materials. Nanofibrous aerogel (NFA) with its highly porous self-supported structure composed of interconnected nanofibrous network offers an ideal platform in this regard. Herein, a facile one-pot strategy is introduced, which utilizes direct deposition of MOF on the nanofibrous surface of the NFAs. NFAs are synthesized using electrospun polyacrylonitrile/polyvinylpyrrolidone (PAN/PVP) polymer nanofibers containing zinc acetate (Zn(Ac)2), which are subjected to freeze drying and thermal treatment. The latter converts Zn(Ac)2 to zinc oxide (ZnO), providing the sites for MOF growth while also adding mechanical integrity to the NFAs through cyclization of the PAN. Exposure of the NFA to the vapor-phase of organic ligand, 2-methylimidazole (2-MeIm) enables in situ growth of zeolitic imidazolate framework-8 (ZIF-8) MOF on the NFA. ZIF-8 loading on the NFAs is further improved by more than tenfold by synthesizing ZnO nanorods/protrusions on the nanofibers, which enables more sites for MOF growth. These findings underscore a significant advancement in designing MOF-based hybrid aerogels, offering a streamlined approach for their use in diverse applications, from catalysis to sensing and water purification.

Clinical and endoscopic characteristics of patients undergoing gastrointestinal endoscopic procedures in Egypt: a nationwide multicenter study.

BACKGROUND: Egypt faces a significant public health burden due to chronic liver diseases (CLD) and peptic ulcer disease. CLD, primarily caused by Hepatitis C virus (HCV) infection, affects over 2.9% of the population nationwide, with regional variations. Steatotic liver disease is rapidly emerging as a significant contributor to CLD, especially in urban areas. Acid-related disorders are another widespread condition that can significantly impact the quality of life. These factors and others significantly influence the indications and findings of gastrointestinal endoscopic procedures performed in Egypt. AIM: We aimed to evaluate the clinico-demographic data, indications, and endoscopic findings in Egyptian patients undergoing gastrointestinal endoscopic procedures in various regions of Egypt. METHODS: This study employed a retrospective multicenter cross-sectional design. Data was collected from patients referred for gastrointestinal endoscopy across 15 tertiary gastrointestinal endoscopy units in various governorates throughout Egypt. RESULTS: 5910 patients aged 38-63 were enrolled in the study; 75% underwent esophagogastroduodenoscopy (EGD), while 25% underwent a colonoscopy. In all studied patients, the most frequent indications for EGD were dyspepsia (19.5%), followed by hematemesis (19.06%), and melena (17.07%). The final EGD diagnoses for the recruited patients were portal hypertension-related sequelae (60.3%), followed by acid-related diseases (55%), while 10.44% of patients had a normally apparent endoscopy. Male gender, old age, and the presence of chronic liver diseases were more common in patients from upper than lower Egypt governorates. Hematochezia (38.11%) was the most reported indication for colonoscopy, followed by anemia of unknown origin (25.11%). IBD and hemorrhoids (22.34% and 21.86%, respectively) were the most prevalent diagnoses among studied patients, while normal colonoscopy findings were encountered in 18.21% of them. CONCLUSION: This is the largest study describing the situation of endoscopic procedures in Egypt. our study highlights the significant impact of regional variations in disease burden on the utilization and outcomes of GI endoscopy in Egypt. The high prevalence of chronic liver disease is reflected in the EGD findings, while the colonoscopy results suggest a potential need for increased awareness of colorectal diseases.

Descemet's membrane endothelial keratoplasty rejection after SARS-COV2 infection or vaccination: 2-year retrospective study.

PURPOSE: To assess the incidence of Descemet's membrane endothelial keratoplasty (DMEK) rejection potentially associated with coronavirus disease 2019 (COVID-19) infection or vaccination, and its association with known rejection risk factors during the first two years of the pandemic. METHODS: This retrospective study included patients with DMEK rejection between January 2020 and December 2021. Diagnostic criteria were based on symptoms, visual acuity, and other clinical assessments. Risk factors for graft rejection were considered, and a telephone survey was conducted to identify possible preceding COVID-19 infection or vaccination. RESULTS: Of 58 patients, 44 were included. Six patients (14%) reported COVID-19 infection, with one immediate endothelial graft rejection (EGR) post-infection. After vaccine availability, 13 of 36 patients had EGR at an average of 2.7 months post-vaccination. Five (38%) had immediate EGR following vaccination, four of which had concomitant risk factors for rejection. CONCLUSION: Although the risk of endothelial graft rejection (EGR) associated with COVID-19 infection or vaccination appears to be extremely low, there may be a causative relationship, especially in patients with pre-existing risk factors for EGR. A temporary increase in anti-rejection treatment following COVID-19 infection or vaccination is recommended, especially in patients with pre-existing risk factors, along with closer monitoring during the subsequent 4 to 8 weeks.

Mechanical Recycling of Carbon Fiber-Reinforced Polymer in a Circular Economy.

This review thoroughly investigates the mechanical recycling of carbon fiber-reinforced polymer composites (CFRPCs), a critical area for sustainable material management. With CFRPC widely used in high-performance areas like aerospace, transportation, and energy, developing effective recycling methods is essential for tackling environmental and economic issues. Mechanical recycling stands out for its low energy consumption and minimal environmental impact. This paper reviews current mechanical recycling techniques, highlighting their benefits in terms of energy efficiency and material recovery, but also points out their challenges, such as the degradation of mechanical properties due to fiber damage and difficulties in achieving strong interfacial adhesion in recycled composites. A novel part of this review is the use of finite element analysis (FEA) to predict the behavior of recycled CFRPCs, showing the potential of recycled fibers to preserve structural integrity and performance. This review also emphasizes the need for more research to develop standardized mechanical recycling protocols for CFRPCs that enhance material properties, optimize recycling processes, and assess environmental impacts thoroughly. By combining experimental and numerical studies, this review identifies knowledge gaps and suggests future research directions. It aims to advance the development of sustainable, efficient, and economically viable CFRPC recycling methods. The insights from this review could significantly benefit the circular economy by reducing waste and enabling the reuse of valuable carbon fibers in new composite materials.

Mortality Audit in the Head and Neck Surgery Ward: A Retrospective Study in a Tertiary Care Hospital of Pakistan.

Background Mortality audit is important for healthcare workers, but this data is lacking in developing countries. It helps to provide material about the cause of death, mortality rate, age, and gender. In a surgical department, such information can help identify key public health challenges that are contributing to morbidity and mortality, and this information can help healthcare workers better tackle those pathologies and focus on their prevention and treatment. Materials and methods A retrospective study was conducted at the Department of ENT - Head and Neck Surgery, Pakistan Institute of Medical Sciences Hospital, Islamabad. Five-year data was collected from the mortality register of the ward from January 2019 to December 2023, including the age, gender, surgical diagnosis, course of hospital stay, and cause of death. The collected data was statistically analyzed and presented in the form of tables and figures. Results A total of 53 deaths in 3890 admissions were found on record, with an overall mortality rate of 1.4%. The median age of participants was 61.5 years, with a preponderance of the male gender (n=34; 64.2%). The most common cause of death was head and neck malignancy (n=39; 73.6%), followed by head and neck abscesses (n=9; 17%). The least common cause of death was diphtheria (n=2; 3.8%). Conclusion Death was more common in old-age patients, with more prevalence in the male population. The most common cause of mortality was head and neck malignancy. The total death count almost remained constant through the years.

Patient satisfaction among Saudi academic hospitals: a systematic review.

PURPOSE: To systematically review the patient's satisfaction (PS) levels within academic hospitals in Saudi Arabia from January 2012 to the end of October 2022. DATA SOURCES: Articles were gathered from PubMed, ProQuest, Google Scholar and Web of Science. STUDY SELECTION/DATA EXTRACTION: This review identified studies that assessed PS in Saudi Arabian university hospitals. Articles published before January 2012, as well as commentary letters, conference papers, theses and dissertations, were excluded. The study employed the five domains of PS as outlined by Boquiren et al. Two independent reviewers independently identified qualifying studies, used the Joanna Briggs Institute tools to evaluate the quality of each study and extracted essential data from each article. RESULTS: Out of the 327 studies identified during the search phase, 11 met the project's objectives and criteria. Six studies reported overall PS rates ranging from 78% to 95.2%, with only one study indicating lower PS levels in emergency departments. Most studies demonstrated that technical skill is the primary domain influencing PS in academic hospitals. CONCLUSION: There is a need for further investigation to explore the factors influencing PS using standardised survey instruments suitable for Saudi culture. Contradictory results regarding PS are clearly evident in the literature; therefore, it is advisable to standardise the assessment process to reduce discrepancies within the academic hospital setting in Saudi Arabia.

Nephroprotective Effect of Bergapten Against Cyclophosphamide-Mediated Renal Stress, Inflammation, and Fibrosis in Wistar Rats: Probable Role of NF-kB and TGF-ß1 Signaling Molecules.

Cyclophosphamide (CPM) is a well-established antineoplastic drug with marked clinical outcomes in various types of cancers. Despite being a promising drug, its use is associated with significant renal toxicity and often limits its use, leading to compromised clinical outcomes. Therefore, this study explored the renal protective effect of bergapten (BGP), a natural bioactive compound that showed marked antioxidant, anti-inflammatory, anticancer, and neuroprotective effects. Till now, BGP has not been studied for its renal protective effect in an in vivo model. Animals were divided into control, toxic, BGP-3, BGP-10, and BGP Per se. The control group was treated with normal saline for 2 weeks. To the toxic group, CPM 200 mg/kg was given on day 7 as i.p. To BGP-3, 10, and Per se, BGP-3 and 10 mg/kg, ip was given 2 weeks with a single shot of CPM 200 day 7. To the Per se group, only BGP 10 mg/kg, ip was given from day 1 to day 14. After 14 days, animals were sacrificed, and kidneys were removed and studied for the markers of oxidative stress, inflammation, renal injury, renal fibrosis, and renal damage using biochemical, histopathological, and immunohistochemical studies. We found that BGP-10 effectively reversed the damage toward normal, whereas BGP-3 failed to exhibit a significant renal protective effect. We conclude that bergapten could be a potential renal protective drug, and hence, more detailed cellular molecular-based studies are needed to bring this drug from the bench to the bedside.

A Sodium Oxychlorosene-Based Infection Prevention Protocol Safely Decreases Postoperative Wound Infections in Adult Spinal Deformity Surgery.

INTRODUCTION: This study sought to determine the efficacy of a complex multi-institutional sodium oxychlorosene-based infection protocol for decreasing the rate of surgical site infection after instrumented spinal surgery for adult spinal deformity (ASD). Infection prevention protocols have not been previously studied in ASD patients. METHODS: A retrospective analysis was performed of patients who underwent posterior instrumented spinal fusion of the thoracic or lumbar spine for deformity correction between January 1, 2011, and May 31, 2019. The efficacy of a multi-modal infection prevention protocol was examined. The infection prevention bundle consisted of methicillin-resistant Staphylococcus aureus testing, chlorhexidine gluconate bathing preoperatively, sodium oxychlorosene rinse, vancomycin powder placement, and surgical drain placement at the time of surgery. RESULTS: About 254 patients fit the inclusion criteria. Among these patients, nine (3.5%) experienced post-surgical deep-wound infection. Demographics and surgical characteristics amongst infected and non-infected cohorts were similar, although diabetes trended towards being more prevalent in patients who developed a postoperative wound infection (p=0.07). Among 222 patients (87.4%) who achieved a minimum of two years of follow-ups, 184 patients (82.9%) experienced successful fusion, comparing favorably with pseudarthrosis rates in the ASD literature. Rates of pseudarthrosis and proximal junction kyphosis were similar amongst infected and non-infected patients. CONCLUSION: An intraoperative comprehensive sodium oxychlorosene-based infection prevention protocol helped to provide a low rate of infection after major deformity correction without negatively impacting other postoperative procedure-related metrics.

Optimal Control and Optimization of Grid-Connected PV and Wind Turbine Hybrid Systems Using Electric Eel Foraging Optimization Algorithms.

This paper presents a comprehensive exploration of a hybrid energy system that integrates wind turbines with photovoltaics (PVs) to address the intermittent nature of electricity production from these sources. The necessity for such technology arises from the sporadic nature of electricity generated by PV cells and wind turbines. The envisioned outcome is an emissions-free, more efficient alternative to traditional energy sources. A variety of optimization techniques are utilized, specifically the Particle Swarm Optimization (PSO) algorithm and Electric Eel Foraging Optimization (EEFO), to achieve optimal power regulation and seamless integration with the public grid, as well as to mitigate anticipated loading issues. The employed mathematical modeling and simulation techniques are used to assess the effectiveness of EEFO in optimizing the operation of grid-connected PV and wind turbine hybrid systems. In this paper, the optimization methods applied to the system's architecture are described in detail, providing a clear understanding of the intricate nature of the approach. The efficacy of these optimization strategies is rigorously evaluated through simulations of diverse operating scenarios using MATLAB/SIMULINK. The results demonstrate that the proposed optimization strategies are not only capable of precisely and swiftly compensating for linked loads, but also effectively controlling the energy supply to maintain the load's power at the desired level. The findings underscore the potential of this hybrid energy system to offer a sustainable and reliable solution for meeting power demands, contributing to the advancement of clean and efficient energy technologies. The results demonstrate the capability of the proposed approach to improve system performance, maximize energy yield, and enhance grid integration, thereby contributing to the advancement of renewable energy technologies and sustainable energy systems.

Ulnar Ray Deficiency: A New Classification and a Unique Case Report.

Ulnar ray deficiency is a rare congenital upper limb defect. We report on a unique case with hand-on-flank deformity on the one side and limb truncation on the contralateral side. The standard of care for the hand-on-flank deformity is to do humerus osteotomy to reposition the hand anteriorly. However, the right limb truncation in our patient made the senior author decide not to do the osteotomy. Final assessment showed that the posterior hand position enabled the patient to reach the ano-genital areas, the pocket, and the mouth. It was concluded that in case of hand-on-flank deformity in one limb and limb truncation of the contralateral limb, osteotomies to bring the hand anteriorly are not advised.