Transcriptomic Signature of the Simulated Microgravity Response in Caenorhabditis elegans and Comparison to Spaceflight Experiments.

Given the growing interest in human exploration of space, it is crucial to identify the effects of space conditions on biological processes. Here, we analyze the transcriptomic response of Caenorhabditis elegans to simulated microgravity and observe the maintained transcriptomic response after returning to ground conditions for four, eight, and twelve days. We show that 75% of the simulated microgravity-induced changes on gene expression persist after returning to ground conditions for four days while most of these changes are reverted after twelve days. Our results from integrative RNA-seq and mass spectrometry analyses suggest that simulated microgravity affects longevity-regulating insulin/IGF-1 and sphingolipid signaling pathways. Finally, we identified 118 genes that are commonly differentially expressed in simulated microgravity- and space-exposed worms. Overall, this work provides insight into the effect of microgravity on biological systems during and after exposure.

Reference-Free Traction Force Microscopy Platform Fabricated via Two-Photon Laser Scanning Lithography Enables Facile Measurement of Cell-Generated Forces.

Cells sense and respond to the physical nature of their microenvironment by mechanically probing their surroundings via cytoskeletal contractions. The material response to these stresses can be measured via traction force microscopy (TFM). Traditional TFM platforms present several limitations including variable spatial resolution, difficulty in attaining the full three-dimensional (3D) deformation/stress profile, and the requirement to remove or relax the cells being measured to determine the zero-stress state. To overcome these limitations, we developed a two-photon, photochemical coupling approach to fabricate a new TFM platform that provides high-resolution control over the 3D placement of fluorescent fiducial markers for facile measurement of cell-generated shear and normal components of traction forces. The highly controlled placement of the 3D marker array provides a built-in, zero stress state eliminating the need to perturb the cells being measured while also providing increased throughput. Using this platform, we discovered that the magnitude of cell-generated shear and normal force components are linked both spatially and temporally. The facile nature and increased throughput of measuring cell-generated forces afforded by this new platform will be useful to the mechanotransduction community and others.

Insights Into the Mineralogy and Surface Chemistry of Extracellular Biogenic S0 Globules Produced by Chlorobaculum tepidum.

Elemental sulfur (S0) is produced and degraded by phylogenetically diverse groups of microorganisms. For Chlorobaculum tepidum, an anoxygenic phototroph, sulfide is oxidized to produce extracellular S0 globules, which can be further oxidized to sulfate. While some sulfur-oxidizing bacteria (e.g., Allochromatium vinosum) are also capable of growth on commercial S0 as an electron donor, C. tepidum is not. Even colloidal sulfur sols, which appear indistinguishable from biogenic globules, do not support the growth of C. tepidum. Here, we investigate the properties that make biogenic S0 globules distinct from abiotic forms of S0. We found that S0 globules produced by C. tepidum and abiotic S0 sols are quite similar in terms of mineralogy and material properties, but the two are distinguished primarily by the properties of their surfaces. C. tepidum's globules are enveloped by a layer of organics (protein and polysaccharides), which results in a surface that is fundamentally different from that of abiotic S0 sols. The organic coating on the globules appears to slow the aging and crystallization of amorphous sulfur, perhaps providing an extended window of time for microbes in the environment to access the more labile forms of sulfur as needed. Overall, our results suggest that the surface of biogenic S0 globules may be key to cell-sulfur interactions and the reactivity of biogenic S0 in the environment.

Effects of liquid cultivation on gene expression and phenotype of C. elegans.

BACKGROUND: Liquid cultures have been commonly used in space, toxicology, and pharmacology studies of Caenorhabditis elegans. However, the knowledge about transcriptomic alterations caused by liquid cultivation remains limited. Moreover, the impact of different genotypes in rapid adaptive responses to environmental changes (e.g., liquid cultivation) is often overlooked. Here, we report the transcriptomic and phenotypic responses of laboratory N2 and the wild-isolate AB1 strains after culturing P0 worms on agar plates, F1 in liquid cultures, and F2 back on agar plates. RESULTS: Significant variations were found in the gene expressions between the N2 and AB1 strains in response to liquid cultivation. The results demonstrated that 8-34% of the environmental change-induced transcriptional responses are transmitted to the subsequent generation. By categorizing the gene expressions for genotype, environment, and genotype-environment interactions, we identified that the genotype has a substantial impact on the adaptive responses. Functional analysis of the transcriptome showed correlation with phenotypical changes. For example, the N2 strain exhibited alterations in both phenotype and gene expressions for germline and cuticle in axenic liquid cultivation. We found transcript evidence to approximately 21% of the computationally predicted genes in C. elegans by exposing the worms to environmental changes. CONCLUSIONS: The presented study reveals substantial differences between N2 and AB1 strains for transcriptomic and phenotypical responses to rapid environmental changes. Our data can provide standard controls for future studies for the liquid cultivation of C. elegans and enable the discovery of condition-specific genes.

Microstructured Elastomer-PEG Hydrogels via Kinetic Capture of Aqueous Liquid-Liquid Phase Separation.

Heterogeneous hydrogels with desired matrix complexity are studied for a variety of biomimetic materials. Despite the range of such microstructured materials described, few methods permit independent control over microstructure and microscale mechanics by precisely controlled, single-step processing methods. Here, a phototriggered crosslinking methodology that traps microstructures in liquid-liquid phase-separated solutions of a highly elastomeric resilin-like polypeptide (RLP) and poly(ethylene glycol) (PEG) is reported. RLP-rich domains of various diameters can be trapped in a PEG continuous phase, with the kinetics of domain maturation dependent on the degree of acrylation. The chemical composition of both hydrogel phases over time is assessed via in situ hyperspectral coherent Raman microscopy, with equilibrium concentrations consistent with the compositions derived from NMR-measured coexistence curves. Atomic force microscopy reveals that the local mechanical properties of the two phases evolve over time, even as the bulk modulus of the material remains constant, showing that the strategy permits control of mechanical properties on micrometer length scales, of relevance in generating mechanically robust materials for a range of applications. As one example, the successful encapsulation, localization, and survival of primary cells are demonstrated and suggest the potential application of phase-separated RLP-PEG hydrogels in regenerative medicine applications.

Distribution and Diversity of Rhodopsin-Producing Microbes in the Chesapeake Bay.

Although sunlight is an abundant source of energy in surface environments, less than 0.5% of the available photons are captured by (bacterio)chlorophyll-dependent photosynthesis in plants and bacteria. Metagenomic data indicate that 30 to 60% of the bacterial genomes in some environments encode rhodopsins, retinal-based photosystems found in heterotrophs, suggesting that sunlight may provide energy for more life than previously suspected. However, quantitative data on the number of cells that produce rhodopsins in environmental systems are limited. Here, we use total internal reflection fluorescence microscopy to show that the number of free-living microbes that produce rhodopsins increases along the salinity gradient in the Chesapeake Bay. We correlate this functional data with environmental data to show that rhodopsin abundance is positively correlated with salinity and with indicators of active heterotrophy during the day. Metagenomic and metatranscriptomic data suggest that the microbial rhodopsins in the low-salinity samples are primarily found in Actinobacteria and Bacteroidetes, while those in the high-salinity samples are associated with SAR-11 type AlphaproteobacteriaIMPORTANCE Microbial rhodopsins are common light-activated ion pumps in heterotrophs, and previous work has proposed that heterotrophic microbes use them to conserve energy when organic carbon is limiting. If this hypothesis is correct, rhodopsin-producing cells should be most abundant where nutrients are most limited. Our results indicate that in the Chesapeake Bay, rhodopsin gene abundance is correlated with salinity, and functional rhodopsin production is correlated with nitrate, bacterial production, and chlorophyll a We propose that in this environment, where carbon and nitrogen are likely not limiting, heterotrophs do not need to use rhodopsins to supplement ATP synthesis. Rather, the light-generated proton motive force in nutrient-rich environments could be used to power energy-dependent membrane-associated processes, such as active transport of organic carbon and cofactors, enabling these organisms to more efficiently utilize exudates from primary producers.

Aqueous Liquid-Liquid Phase Separation of Resilin-Like Polypeptide/Polyethylene Glycol Solutions for the Formation of Microstructured Hydrogels.

Multiple approaches to generate microstructured hydrogels have emerged in order to control microscale properties for applications ranging from mechanical reinforcement to regenerative medicine. Here, we report new heterogeneous hybrid hydrogels comprising emerging resilin-like polypeptides (RLPs); the hydrogels can be engineered with controlled microstructure and distinct micromechanical properties via the liquid-liquid phase separation (LLPS) of aqueous solutions of the RLPs and poly(ethylene glycol) (PEG). The microstructure in the hydrogels was captured by cross-linking a phase-separated RLP and PEG solution via a Mannich-type reaction with the cross-linker tris(hydroxymethyl phosphine) (THP). Phase diagrams of the RLP/PEG system were generated in order to define solution parameters that would yield micron-scale domains in the hydrogels with diameters on the order of 20-90 µm; the production of RLP- and PEG-rich domains with these dimensions was confirmed via confocal microscopy. The hydrogel mechanical properties were assessed via oscillatory rheology and atomic force microscopy (AFM), with the hydrogels exhibiting a moderate bulk shear storage modulus (ca. 600 Pa) and micromechanical properties of the domains (Young's modulus ca. 13 kPa) that were distinct from those of the matrix (ca. 6 kPa). These results demonstrate that tuning the parameters of the aqueous-aqueous phase-separated RLP/PEG solutions provides a simple, straightforward methodology for fabricating microstructured protein-containing hydrogels, without extensive material processing or purification. Given the unusual mechanical properties of the resilins, these methods potentially could be useful for engineering the micromechanical properties and cellular behavior in phase-separated protein-polymer hydrogels.

A hydrogel-based tumor model for the evaluation of nanoparticle-based cancer therapeutics.

Three-dimensional (3D) tissue-engineered tumor models have the potential to bridge the gap between monolayer cultures and patient-derived xenografts for the testing of nanoparticle (NP)-based cancer therapeutics. In this study, a hydrogel-derived prostate cancer (PCa) model was developed for the in vitro evaluation of doxorubicin (Dox)-loaded polymer NPs (Dox-NPs). The hydrogels were synthesized using chemically modified hyaluronic acid (HA) carrying acrylate groups (HA-AC) or reactive thiols (HA-SH). The crosslinked hydrogel networks exhibited an estimated pore size of 70-100 nm, similar to the spacing of the extracellular matrices (ECM) surrounding tumor tissues. LNCaP PCa cells entrapped in the HA matrices formed distinct tumor-like multicellular aggregates with an average diameter of 50 µm after 7 days of culture. Compared to cells grown on two-dimensional (2D) tissue culture plates, cells from the engineered tumoroids expressed significantly higher levels of multidrug resistance (MDR) proteins, including multidrug resistance protein 1 (MRP1) and lung resistance-related protein (LRP), both at the mRNA and the protein levels. Separately, Dox-NPs with an average diameter of 54 ± 1 nm were prepared from amphiphilic block copolymers based on poly(ethylene glycol) (PEG) and poly(ε-caprolactone) (PCL) bearing pendant cyclic ketals. Dox-NPs were able to diffuse through the hydrogel matrices, penetrate into the tumoroid and be internalized by LNCaP PCa cells through caveolae-mediated endocytosis and macropinocytosis pathways. Compared to 2D cultures, LNCaP PCa cells cultured as multicellular aggregates in HA hydrogel were more resistant to Dox and Dox-NPs treatments. Moreover, the NP-based Dox formulation could bypass the drug efflux function of MRP1, thereby partially reversing the resistance to free Dox in 3D cultures. Overall, the engineered tumor model has the potential to provide predictable results on the efficacy of NP-based cancer therapeutics.

Hyaluronic acid-based hydrogels containing covalently integrated drug depots: implication for controlling inflammation in mechanically stressed tissues.

Synthetic hydrogels containing covalently integrated soft and deformable drug depots capable of releasing therapeutic molecules in response to mechanical forces are attractive candidates for the treatment of degenerated tissues that are normally load bearing. Herein, radically cross-linkable block copolymer micelles (xBCM) assembled from an amphiphilic block copolymer consisting of hydrophilic poly(acrylic acid) (PAA) partially modified with 2-hydroxyethyl acrylate, and hydrophobic poly(n-butyl acryclate) (PnBA) were employed as the drug depots and the microscopic cross-linkers for the preparation of hyaluronic acid (HA)-based, hydrogels. HA hydrogels containing covalently integrated micelles (HAxBCM) were prepared by radical polymerization of glycidyl methacrylate (GMA)-modified HA (HAGMA) in the presence of xBCMs. When micelles prepared from the parent PAA-b-PnBA without any polymerizable double bonds were used, hydrogels containing physically entrapped micelles (HApBCM) were obtained. The addition of xBCMs to a HAGMA precursor solution accelerated the gelation kinetics and altered the hydrogel mechanical properties. The resultant HAxBCM gels exhibit an elastic modulus of 847 ± 43 Pa and a compressive modulus of 9.2 ± 0.7 kPa. Diffusion analysis of Nile Red (NR)-labeled xBCMs employing fluorescence correlation spectroscopy confirmed the covalent immobilization of xBCMs in HA networks. Covalent integration of dexamethasone (DEX)-loaded xBCMs in HA gels significantly reduced the initial burst release and provided sustained release over a prolonged period. Importantly, DEX release from HAxBCM gels was accelerated by intermittently applied external compression in a strain-dependent manner. Culturing macrophages in the presence of DEX-releasing HAxBCM gels significantly reduced cellular production of inflammatory cytokines. Incorporating mechano-responsive modules in synthetic matrices offers a novel strategy to harvest mechanical stress present in the healing wounds to initiate tissue repair.

Poly(ε-caprolactone)-based copolymers bearing pendant cyclic ketals and reactive acrylates for the fabrication of photocrosslinked elastomers.

Block copolymers of poly(ethylene glycol) and poly(ε-caprolactone) (PCL) with chemically addressable functional groups were synthesized and characterized. Ring-opening polymerization of ε-caprolactone (CL) and 1,4,8-trioxaspiro-[4,6]-9-undecanone (TSU) using α-methoxy, ω-hydroxyl poly(ethylene glycol) as the initiator afforded a copolymer with cyclic ketals being randomly distributed in the hydrophobic PCL block. At an initiator/catalyst molar ratio of 10/1 and a TSU/CL weight ratio of 1/4, a ketal-carrying copolymer (ECT2-CK) with Mn of 52 kDa and a ketal content of 15 mol.% was obtained. Quantitative side-chain deacetalization revealed the reactive ketones without noticeable polymer degradation. In our study, 10 mol.% of cyclic ketals were deprotected and the ketone-containing copolymer was designated as ECT2-CO. Reaction of ECT2-CO with 2-(2-(aminooxy)acetoxy)-ethyl acrylate gave rise to an acrylated product (ECT2-AC) containing an estimated 3-5 acrylate groups per chain. UV-initiated radical polymerization of ECT2-AC in dichloromethane resulted in a crosslinked network (xECT2-AC). Thermal and morphological analyses employing differential scanning calorimetry and atomic force microscopy operated in PeakForce Tapping mode revealed the semicrystalline nature of the network, which contained stiff crystalline lamellae dispersed in a softer amorphous interstitial. Macroscopic and nanoscale mechanical characterizations showed that ECT2-CK exhibited a significantly lower modulus than PCL of a similar molecular weight. Whereas ECT2-CK undergoes a plastic deformation with a distinct yield point and a cold-drawing region, xECT2-AC exhibits a compliant, elastomeric deformation with a Young's modulus of 0.5±0.1 MPa at 37°C. When properly processed, the crosslinked network exhibited shape-memory behaviors, with shape fixity and shape recovery values close to 1 and a shape recovery time of less than 4s at 37°C. In vitro studies showed that xECT2-AC films did not induce any cytotoxic effects on the cultured mesenchymal stem cells. The crosslinkable polyester copolymers can be potentially used as tissue engineering scaffolds and minimally invasive medical devices.

DNA crunching by a viral packaging motor: Compression of a procapsid-portal stalled Y-DNA substrate.

Many large double-stranded DNA viruses employ high force-generating ATP-driven molecular motors to package to high density their genomes into empty procapsids. Bacteriophage T4 DNA translocation is driven by a two-component motor consisting of the procapsid portal docked with a packaging terminase-ATPase. Fluorescence resonance energy transfer and fluorescence correlation spectroscopic (FRET-FCS) studies of a branched (Y-junction) DNA substrate with a procapsid-anchoring leader segment and a single dye molecule situated at the junction point reveal that the "Y-DNA" stalls in proximity to the procapsid portal fused to GFP. Comparable structure Y-DNA substrates containing energy transfer dye pairs in the Y-stem separated by 10 or 14 base pairs reveal that B-form DNA is locally compressed 22-24% by the linear force of the packaging motor. Torsional compression of duplex DNA is thus implicated in the mechanism of DNA translocation.

Viral DNA packaging studied by fluorescence correlation spectroscopy.

The DNA packaging machinery of bacteriophage T4 was studied in vitro using fluorescence correlation spectroscopy. The ATP-dependent translocation kinetics of labeled DNA from the bulk solution, to the phage interior, was measured by monitoring the accompanied decrease in DNA diffusibility. It was found that multiple short DNA fragments (100 basepairs) can be sequentially packaged by an individual phage prohead. Fluorescence resonance energy transfer between green fluorescent protein donors within the phage interior and acceptor-labeled DNA was used to confirm DNA packaging. Without ATP, no packaging was observed, and there was no evidence of substrate association with the prohead.

Increasing the sensitivity of DNA microarrays by metal-enhanced fluorescence using surface-bound silver nanoparticles.

The effects of metal-enhanced fluorescence (MEF) have been measured for two dyes commonly used in DNA microarrays, Cy3 and Cy5. Silver island films (SIFs) grown on glass microscope slides were used as substrates for MEF DNA arrays. We examined MEF by spotting biotinylated, singly-labeled 23 bp DNAs onto avidin-coated SIF substrates. The fluorescence enhancement was found to be dependent on the DNA spotting concentration: below approximately 12.5 muM, MEF increased linearly, and at higher concentrations MEF remained at a constant maximum of 28-fold for Cy5 and 4-fold for Cy3, compared to avidin-coated glass substrates. Hybridization of singly-labeled oligonucleotides to arrayed single-stranded probes showed lower maximal MEF factors of 10-fold for Cy5 and 2.5-fold for Cy3, because of the smaller amount of immobilized fluorophores as a result of reduced surface hybridization efficiencies. We discuss how MEF can be used to increase the sensitivity of DNA arrays, especially for far red emitting fluorophores like Cy5, without significantly altering current microarray protocols.

Plasmon-controlled fluorescence: A new detection technology.

Fluorescence is widely used in biological research. Future advances in biology and medicine often depend on the advances in the capabilities of fluorescence measurements. In this overview paper we describe how a combination of fluorescence, and plasmonics, and nanofabrication can fundamentally change and increase the capabilities of fluorescence technology. This change will be based on the use of surface plasmons which are collective oscillations of free electrons in metallic surfaces and particles. Surface plasmon resonance is now used to measure bioaffinity reactions. However, the uses of surface plasmons in biology are not limited to their optical absorption or extinction. We have shown that fluorophores in the excited state can create plasmons which radiate into the far field; additionally fluorophores in the ground state can interact with and be excited by surface plasmons. These interactions suggest that the novel optical absorption and scattering properties of metallic nanostructures can be used to control the decay rates, location and direction of fluorophore emission. We refer to this technology as plasmon-controlled fluorescence. We predict that plasmon-controlled fluorescence (PCF) will result in a new generation of probes and devices. PCF is likely to allow design of structures which enhance emission at specific wavelengths and the creation of new devices which control and transport the energy from excited fluorophores in the form of plasmons, and then convert the plasmons back to light.

Long time scale blinking kinetics of cyanine fluorophores conjugated to DNA and its effect on Förster resonance energy transfer.

The blinking kinetics of individual Cy5 fluorophores conjugated to DNA are directly measured using single-molecule spectroscopy. Under deoxygenated aqueous conditions, Cy5 fluorescence exhibits spontaneous and reversible on/off fluctuations with a period lasting seconds. This blinking is observed when directly exciting Cy5 with 640 nm light and by Forster resonance energy transfer (FRET). We find that Cy5 blinking is influenced by the proximity of the donor, the structure of the donor, the presence of 514 nm excitation, and FRET. In the context of single-molecule FRET, blinking of the acceptor produces anticorrelated donor-acceptor intensity fluctuations, which can be difficult to discern from variations in the interdye distance. Slow blinking is, in particular, problematic because it overlaps with biologically relevant time scales. By employing an alternating 514640 nm laser excitation scheme, we show that the dark states can be readily resolved and discriminated from FRET distance fluctuations.

Using fluorescence resonance energy transfer to measure distances along individual DNA molecules: corrections due to nonideal transfer.

Single molecule fluorescence resonance energy transfer has been extensively used to measure distance changes and kinetics in various biomolecular systems. However, due to complications involving multiple de-excitation pathways of the dyes, the absolute inter-dye distance information has seldom been recovered. To circumvent this we directly probe the relative variations in the quantum yield of individual fluorophores. B-DNA was used as a scaffold to position the donor (Cy3 or TMR) at precise distances from the acceptor (Cy5) within the Forster radius. We found that the variation in the Cy3 quantum yield is approximately 5 times larger than that of TMR. By taking into account the molecule-to-molecule variability in the acceptor/donor quantum yield ratio, the apparent fluorescence resonance energy transfer efficiencies were scaled to yield the theoretical values. We obtained very good agreement with a physical model that predicts distances along B-DNA.