Simultaneous Elucidation of Solid and Solution Manganese Environments via Multiphase Operando Extended X-ray Absorption Fine Structure Spectroscopy in Aqueous Zn/MnO2 Batteries.

Aqueous Zn/MnO2 batteries (AZMOB) with mildly acidic electrolytes hold promise as potential green grid-level energy storage solutions for clean power generation. Mechanistic understanding is critical to advance capacity retention needed by the application but is complex due to the evolution of the cathode solid phases and the presence of dissolved manganese in the electrolyte due to a dissolution-deposition redox process. This work introduces operando multiphase extended X-ray absorption fine structure (EXAFS) analysis enabling simultaneous characterization of both aqueous and solid phases involved in the Mn redox reactions. The methodology was successfully conducted in multiple electrolytes (ZnSO4, Zn(CF3SO3)2, and Zn(CH3COO)2) revealing similar manganese coordination environments but quantitative differences in distribution of Mnn+ species in the solid and solution phases. Complementary Raman spectroscopy was utilized to identify the less crystalline Mn-containing products formed under charge at the cathodes. This was further augmented by transmission electron microscopy (TEM) to reveal the morphology and surface condition of the deposited solids. The results demonstrate an effective approach for bulk-level characterization of poorly crystalline multiphase solids while simultaneously gaining insight into the dissolved transition-metal species in solution. This work provides demonstration of a useful approach toward gaining insight into complex electrochemical mechanisms where both solid state and dissolved active materials are important contributors to redox activity.

Discharging Behavior of Hollandite α-MnO2 in a Hydrated Zinc-Ion Battery.

Hollandite, α-MnO2, is of interest as a prospective cathode material for hydrated zinc-ion batteries (ZIBs); however, the mechanistic understanding of the discharge process remains limited. Herein, a systematic study on the initial discharge of an α-MnO2 cathode under a hydrated environment was reported using density functional theory (DFT) in combination with complementary experiments, where the DFT predictions well described the experimental measurements on discharge voltages and manganese oxidation states. According to the DFT calculations, both protons (H+) and zinc ions (Zn2+) contribute to the discharging potentials of α-MnO2 observed experimentally, where the presence of water plays an essential role during the process. This study provides valuable insights into the mechanistic understanding of the discharge of α-MnO2 in hydrated ZIBs, emphasizing the crucial interplay among the H2O molecules, the intercalated Zn2+ or H+ ions, and the Mn4+ ions on the tunnel wall to enhance the stability of discharged states and, thus, the electrochemical performances in hydrated ZIBs.

Self-healing, Improved Efficiency Solid State Rechargeable Li/I2 Based Battery.

Solid state electrolytes are receiving significant interest due to the prospect of improved safety, however, addressing the incidence and consequence of internal short circuits remains an important issue. Herein, a battery based on a LiI-LiI(HPN)2 solid state electrolyte demonstrated self-healing after internal shorting where the cells recovered and continued to cycle effectively. The functional rechargeable electrochemistry of the self-forming Li/I2-based battery was investigated through interfacial modification by inclusion of Li metal (at the negative interface), and/or fabricated carbon nanotube substrates at the positive interface. A cell design with lithium metal at the negative and a carbon substrate at the positive interface produced Coulombic efficiencies > 90% over 60 cycles. Finally, the beneficial effects of moderately elevated temperature were established where a 10°C temperature increase led to ~5X lower resistance.

Unraveling the Dissolution-Mediated Reaction Mechanism of α-MnO2 Cathodes for Aqueous Zn-Ion Batteries.

Aqueous Zn/α-MnO2 batteries have attracted immense interest owing to their high energy density, low cost, and safety, making them desirable for future large-scale energy application. Despite these merits, the comprehensive understanding of their reaction mechanism has been elusive due to the limitations of standard bulk characterization. Here, via transmission electron microscopy, the dissolution-mediated reaction mechanism of a Zn/α-MnO2 system is discovered and explored in full scope to involve reversible formation of Zn4 SO4 (OH)6 ·xH2 O and "birnessite-like" Zn-MnOx phase upon cycling. Overall, α-MnO2 acts primarily as a source for cell activation through dissolution and thus is not directly involved in the Zn redox chemistry. This microscopic study offers a unique knowledge on the unconventional reaction chemistry of Zn/α-MnO2 batteries.

Promoting Transport Kinetics in Li-Ion Battery with Aligned Porous Electrode Architectures.

Developing scalable energy storage systems with high energy and power densities is essential to meeting the ever-growing portable electronics and electric vehicle markets, which calls for development of thick electrode designs to improve the active material loading and greatly enhance the overall energy density. However, rate capabilities in lithium-ion batteries usually fall off rapidly with increasing electrode thickness due to hindered ionic transport kinetics, which is especially the issue for conversion-based electroactive materials. To alleviate the transport constrains, rational design of three-dimensional porous electrodes with aligned channels is critically needed. Herein, magnetite (Fe3O4) with high theoretical capacity is employed as a model material, and with the assistance of micrometer-sized graphine oxide (GO) sheets, aligned Fe3O4/GO (AGF) electrodes with well-defined ionic transport channels are formed through a facile ice-templating method. The as-fabricated AGF electrodes exhibit excellent rate capacity compared with conventional slurry-casted electrodes with an areal capacity of ∼3.6 mAh·cm-2 under 10 mA·cm-2. Furthermore, clear evidence provided by galvanostatic charge-discharge profiles, cyclic voltammetry, and symmetric cell electrochemical impedance spectroscopy confirms the facile ionic transport kinetics in this proposed design.