Dipole and quadrupole nonparaxial solitary waves.

The cubic nonlinear Helmholtz equation with third and fourth order dispersion and non-Kerr nonlinearity, such as the self steepening and the self frequency shift, is considered. This model describes nonparaxial ultrashort pulse propagation in an optical medium in the presence of spatial dispersion originating from the failure of slowly varying envelope approximation. We show that this system admits periodic (elliptic) solitary waves with a dipole structure within a period and also a transition from a dipole to quadrupole structure within a period depending on the value of the modulus parameter of a Jacobi elliptic function. The parametric conditions to be satisfied for the existence of these solutions are given. The effect of the nonparaxial parameter on physical quantities, such as amplitude, pulse width, and speed of the solitary waves, is examined. It is found that by adjusting the nonparaxial parameter, the speed of solitary waves can be decelerated. The stability and robustness of the solitary waves are discussed numerically.

Coupled Helmholtz equations: Chirped solitary waves.

We investigate the existence and stability properties of chirped gray and anti-dark solitary waves within the framework of a coupled cubic nonlinear Helmholtz equation in the presence of self-steepening and a self-frequency shift. We show that for a particular combination of self-steepening and a self-frequency shift, there is not only chirping but also chirp reversal. Specifically, the associated nontrivial phase has two intensity dependent terms: one varies as the reciprocal of the intensity, while the other, which depends on non-Kerr nonlinearities, is directly proportional to the intensity. This causes chirp reversal across the solitary wave profile. A different combination of non-Kerr terms leads to chirping but no chirp reversal. The influence of a nonparaxial parameter on physical quantities, such as intensity, speed, and pulse width of the solitary waves, is studied as well. It is found that the speed of the solitary waves can be tuned by altering the nonparaxial parameter. Stable propagation of these nonparaxial solitary waves is achieved by an appropriate choice of parameters.

Early osseointegration of a strontium containing glass ceramic in a rabbit model.

The most important property of a bone cement or a bone substitute in load bearing orthopaedic implants is good integration with host bone with reduced bone resorption and increased bone regeneration at the implant interface. Long term implantation of metal-based joint replacements often results in corrosion and particle release, initiating chronic inflammation leading onto osteoporosis of host bone. An alternative solution is the coating of metal implants with hydroxyapatite (HA) or bioglass or the use of bulk bioglass or HA-based composites. In the above perspective, the present study reports the in vivo biocompatibility and bone healing of the strontium (Sr)-stabilized bulk glass ceramics with the nominal composition of 4.5SiO2-3Al2O3-1.5P2O5-3SrO-2SrF2 during short term implantation of up to 12 weeks in rabbit animal model. The progression of healing and bone regeneration was qualitatively and quantitatively assessed using fluorescence microscopy, histological analysis and micro-computed tomography. The overall assessment of the present study establishes that the investigated glass ceramic is biocompatible in vivo with regards to local effects after short term implantation in rabbit animal model. Excellent healing was observed, which is comparable to that seen in response to a commercially available implant of HA-based bioglass alone.

Influence of polyelectrolyte film stiffness on bacterial growth.

Photo-cross-linkable polyelectrolyte films, whose nanomechanical properties can be varied under UV light illumination, were prepared from poly(l-lysine) (PLL) and a hyaluronan derivative modified with photoreactive vinylbenzyl groups (HAVB). The adhesion and the growth of two model bacteria, namely Escherichia coli and Lactococcus lactis , were studied on non-cross-linked and cross-linked films to investigate how the film stiffness influences the bacterial behavior. While the Gram positive L. lactis was shown to grow slowly on both films, independently of their rigidity, the Gram negative E. coli exhibited a more rapid growth on non-cross-linked softer films compared to the stiffer ones. Experiments performed on photopatterned films showing both soft and stiff regions, confirmed a faster development of E. coli colonies on softer regions. Interestingly, this behavior is opposite to the one reported before for mammalian cells. Therefore, the photo-cross-linked (PLL/HAVB) films are interesting coatings for tissue engineering since they promote the growth of mammalian cells while limiting the bacterial colonization.

Rigidity-patterned polyelectrolyte films to control myoblast cell adhesion and spatial organization.

In vivo, cells are sensitive to the stiffness of their micro-environment and especially to the spatial organization of the stiffness. In vitro studies of this phenomenon can help to better understand the mechanisms of the cell response to spatial variations of the matrix stiffness. In this work, we design polelyelectrolyte multilayer films made of poly(L-lysine) and a photo-reactive hyaluronan derivative. These films can be photo-crosslinked through a photomask to create spatial patterns of rigidity. Quartz substrates incorporating a chromium mask are prepared to expose selectively the film to UV light (in a physiological buffer), without any direct contact between the photomask and the soft film. We show that these micropatterns are chemically homogeneous and flat, without any preferential adsorption of adhesive proteins. Three groups of pattern geometries differing by their shape (circles or lines), size (form 2 to 100 µm) or interspacing distance between the motifs are used to study the adhesion and spatial organization of myoblast cells. On large circular micropatterns, the cells form large assemblies that are confined to the stiffest parts. Conversely, when the size of the rigidity patterns is subcellular, the cells respond by forming protrusions. Finally, on linear micropatterns of rigidity, myoblasts align and their nuclei drastically elongate in specific conditions. These results pave the way for the study of the different steps of myoblast fusion in response to matrix rigidity in well-defined geometrical conditions.

Moderate intensity static magnetic field has bactericidal effect on E. coli and S. epidermidis on sintered hydroxyapatite.

The application of electromagnetic field in the context of bacteria associated infections on biomaterial surfaces has not been extensively explored. In this work, we applied a moderate intensity static magnetic field (100 mT) to understand the adhesion and growth behavior of both gram positive (S. epidermidis) and gram negative bacteria (E. coli) and also to investigate bactericidal/bacteriostatic property of the applied electromagnetic field. An in-house built magnetometer was used to apply static homogeneous magnetic field during a planned set of in vitro experiments. Both the sintered hydroxyapatite (HA) and the control samples seeded with bacteria were exposed to the magnetic field (100 mT) for different timescale during their log phase growth. Quantitative analysis of the SEM images confirms the effect of electromagnetic field on suppressing bacterial growth. Furthermore, cell integrity and inner membrane permeabilization assays were performed to understand the origin of such effect. The results of these assays were statistically analyzed to reveal the bactericidal effect of magnetic field, indicating cell membrane damage. Under the investigated culture conditions, the bactericidal effect was found to be less effective for S. Epidermidis than E. coli.

Cellular proliferation, cellular viability, and biocompatibility of HA-ZnO composites.

One of the important issues in the development of hydroxyapatite (HA)-based biomaterials is the prosthetic infection, which limits wider use of monolithic HA despite superior cellular response. Recently, we reported that ZnO addition to HA can induce bactericidal property. It is therefore important to assess how ZnO addition influences the cytotoxicity property and cell adhesion/proliferation on HA-ZnO composite surfaces in vitro. In the above perspective, the objective of this study is to investigate the cell type and material composition dependent cellular proliferation and viability of pressureless sintered HA-ZnO composites. The combination of cell viability data as well as morphological observations of cultured human osteoblast-like SaOS2 cells and mouse fibroblast L929 cells suggests that HA-ZnO composites containing 10 Wt % or lower ZnO exhibit the ability to support cell adhesion and proliferation. Both SaOS2 and L929 cells exhibit extensive multidirectional network of actin cytoskeleton and cell flattening on the lower ZnO containing (≤10 Wt %) HA-ZnO composites. The in vitro results illustrate how variation in ZnO content can influence significantly the cell vitality, as evaluated using MTT biochemical assay. Also, the critical statistical analysis reveals that ZnO addition needs to be carefully tailored to ensure good in vitro cytocompatibility. The underlying reasons for difference in biological properties are analyzed. It is suggested that surface wettability as well as dissolution of ZnO, both contribute to the observed differences in cellular viability and proliferation.

Sintering, microstructure, mechanical, and antimicrobial properties of HAp-ZnO biocomposites.

The implant associated infection is widely considered as a major concern in the field of biomedical applications and this has been the driving force for developing HAp-based biomaterials with antibacterial additives for possible use in prosthetic devices. In our present work, we sintered Hydroxyapatite (HAp) with different concentrations of zinc oxide microrods (ZnO) at 1250°C to produce HAp-ZnO biocomposites. In vitro antimicrobial studies were carried out to understand how ZnO addition (up to 30 wt %) to HAp leads to the improvement in bacteria static/bactericidal property and thereby, can reduce bacterial infection on implant surface. Both Gram positive (S. aureus, S. epidermidis) and Gram negative bacteria (E. coli) were used for this study. After 4 h of incubation, it was observed that microbial activity on HAp-20 wt % and HAp-30 wt % ZnO are significantly reduced in comparison to control sample, independent of type of bacterial cells. Despite such improvement in antimicrobial property, an increase in ZnO addition was found to have modest influence on fracture toughness or hardness properties. A maximum up to 1.7 MPam(1/2) indentation fracture toughness and hardness of up to 6.8 GPa were measured in HAp-ZnO biocomposites.