Structure-activity relationship for antibacterial chitosan carrying cationic and hydrophobic moieties.

To overcome the problem of antibiotic resistance and toxicity of synthetic polymers, herein we report the synthesis of biocompatible polymers which can serve as broad spectrum antimicrobials. A regioselective synthetic method was developed to synthesize N-functionalized chitosan polymers having similar degree of substitution of cationic and hydrophobic functionality with different lipophilic chains. We obtained optimum antibacterial effect by utilizing the combination of cationic and longer lipophilic chain in the polymer, against four bacterial strains. Inhibition and killing of bacteria were more pronounced in Gram positive bacteria than in Gram negative bacteria. Growth kinetics and scanning electron microscopy imaging of the polymer treated bacterial cells confirmed the inhibition of bacterial growth, morphological changes in the structure and membrane disruption in the cells as compared to the growth control for each strain. Further investigation into the toxicity and selectivity of the polymers guided us to develop a structure-activity relationship for this class of biocompatible polymers.

Derivatized chitosan-oil-in-water nanocapsules for trans-cinnamaldehyde delivery.

trans-Cinnamaldehyde, known for its bacterial anti-quorum sensing activity when applied at sublethal concentrations, has gained traction given its potential use against multidrug resistant bacteria. In this work, trans-cinnamaldehyde-loaded oil-in-water nanocapsules coated with chitosan, N,N,N-trimethyl chitosan chloride, N-(2-(N,N,N-trimethylammoniumyl)acetyl) chitosan chloride or N-(6-(N,N,N-trimethylammoniumyl)hexanoyl)chitosan chloride were obtained. All the formulated nanocapsules showed a Z-average hydrodynamic diameter ~ 160 nm and ζ-potential higher than +40 mV. N,N,N-trimethyl chitosan-coated oil-in-water nanocapsules showed the greatest trans-cinnamaldehyde association efficiency (99.3 ± 7.6) % and total payload release (88.6 ± 22.5) %, while N-(6-(N,N,N-trimethylammoniumyl)hexanoyl)chitosan chloride chitosan-coated oil-in-water nanocapsules were the only formulations stable in phosphate buffer saline PBS (pH 7.4) upon incubation at 37 °C for 24 h. Future work should address the stability of the developed nanocapsules in culture media and their biological performance.

Aroylated phenylenediamine HO53 modulates innate immunity, histone acetylation and metabolism.

In the current context of antibiotic resistance, the need to find alternative treatment strategies is urgent. Our research aimed to use synthetized aroylated phenylenediamines (APDs) to induce the expression of cathelicidin antimicrobial peptide gene (CAMP) to minimize the necessity of antibiotic use during infection. One of these compounds, HO53, showed promising results in inducing CAMP expression in bronchial epithelium cells (BCi-NS1.1 hereafter BCi). Thus, to decipher the cellular effects of HO53 on BCi cells, we performed RNA sequencing (RNAseq) analysis after 4, 8 and 24 h treatment of HO53. The number of differentially expressed transcripts pointed out an epigenetic modulation. Yet, the chemical structure and in silico modeling indicated HO53 as a histone deacetylase (HDAC) inhibitor. When exposed to a histone acetyl transferase (HAT) inhibitor, BCi cells showed a decreased expression of CAMP. Inversely, when treated with a specific HDAC3 inhibitor (RGFP996), BCi cells showed an increased expression of CAMP, indicating acetylation status in cells as determinant for the induction of the expression of the gene CAMP expression. Interestingly, a combination treatment with both HO53 and HDAC3 inhibitor RGFP966 leads to a further increase of CAMP expression. Moreover, HDAC3 inhibition by RGFP966 leads to increased expression of STAT3 and HIF1A, both previously demonstrated to be involved in pathways regulating CAMP expression. Importantly, HIF1α is considered as a master regulator in metabolism. A significant number of genes of metabolic enzymes were detected in our RNAseq data with enhanced expression conveying a shift toward enhanced glycolysis. Overall, we are demonstrating that HO53 might have a translational value against infections in the future through a mechanism leading to innate immunity strengthening involving HDAC inhibition and shifting the cells towards an immunometabolism, which further favors innate immunity activation.

Antibacterial properties of poly (N,N-dimethylaminoethyl methacrylate) obtained at different initiator concentrations in solution polymerization.

The samples of poly(N,N-dimethylaminoethyl methacrylate) were synthesized by radical polymerization. The amount of monomer and solvent was constant as opposed to an amount of initiator which was changing. No clear relationship between polymerization conditions and the molecular weight of the polymer was found, probably due to the branched configuration of produced polymer. Bactericidal interactions in all samples against Gram-positive and Gram-negative bacteria have been demonstrated. However, the observed effect has various intensities, depending on the type of bacteria and the type of sample.

Chitosan-hydroxycinnamic acid conjugates: Optimization of the synthesis and investigation of the structure activity relationship.

A new synthesis method was developed and optimized by a full factorial design for conjugating hydroxycinnamic acids (HCA-s) to chitosan. Cinnamic acid and tert-butyldimethylsilyl protected HCA-s were converted to their corresponding acyl chlorides and reacted with 3,6-di-O-tert-butyldimethylsilyl-chitosan to selectively form amide linkages, resulting in water-soluble conjugates after deprotection. Nineteen conjugates were obtained with various degrees of substitution (DS) ranging from 3% to 60%. The conjugates were found to be bactericidal against Staphylococcus aureus and Escherichia coli, with their activities equal to chitosan at low DS but an increase in the DS correlated with reduced activity. DPPH (2,2-diphenyl-1-picrylhydrazyl) scavenging assay was performed to determine the EC50 values. Chitosan only exhibited low antioxidant activity, whereas the HCA-chitosan conjugates exhibited higher antioxidant activities correlating with the DS. One caffeic acid conjugate (21%) was 4000 times more active than chitosan and more active than free caffeic acid.

In vitro biological response of human osteoblasts in 3D chitosan sponges with controlled degree of deacetylation and molecular weight.

We have studied the effect of chitosan sponges, produced from chitosan batches with distinct degree of deacetylation (DDA) and molecular weight (Mw), on the adhesion, growth and differentiation of primary human osteoblasts with an aim to offer a suitable tool for guided bone regeneration. All the chitosan sponges revealed similar microstructure, irrespective of the DDA (58, 73, 82, 88, and 91 %) and Mw (749, 547, 263, 215, and 170 kDa, respectively). Cell spreading was higher on sponges having a higher DDA. Higher DDA induced a more pronounced increase in alkaline phosphatase activity, osteopontin (OPN), vascular endothelial growth factor-A (VEGF), interleukin-6 (IL-6), and reduction in monocyte chemoattractant protein-1 (MCP-1), sclerostin (SOST) and dickkopf related protein-1 as compared to lower DDA. Lower DDA induced the increased secretion of osteoprotegerin and SOST as compared to higher DDA. The combination of higher DDA and Mw induced an increased secretion of VEGF and IL-6, however reduced the secretion of OPN as compared to chitosan with similar DDA but with lower Mw. In summary, the variations in cellular responses to the different chitosan sponges indicate a potential for individual tailoring of desired responses in guided bone regeneration.

Drug-Loaded Photosensitizer-Chitosan Nanoparticles for Combinatorial Chemo- and Photodynamic-Therapy of Cancer.

In this study we have developed biodegradable polymeric nanoparticles (NPs) containing the cytostatic drugs mertansine (MRT) or cabazitaxel (CBZ). The NPs are based on chitosan (CS) conjugate polymers synthesized with different amounts of the photosensitizer tetraphenylchlorin (TPC). These TPC-CS NPs have high loading capacity and strong drug retention due to π-π stacking interactions between the drugs and the aromatic photosensitizer groups of the polymers. CS polymers with 10% of the side chains containing TPC were found to be optimal in terms of drug loading capacity and NP stability. The TPC-CS NPs loaded with MRT or CBZ displayed higher cytotoxicity than the free form of these drugs in the breast cancer cell lines MDA-MB-231 and MDA-MB-468. Furthermore, light-induced photochemical activation of the NPs elicited a strong photodynamic therapy effect on these breast cancer cells. Biodistribution studies in mice showed that most of the TPC-CS NPs accumulated in liver and lungs, but they were also found to be localized in tumors derived from HCT-116 cells. These data suggest that the drug-loaded TPC-CS NPs have a potential in combinatory anticancer therapy and as contrast agents.

The Effect of Molecular Weight on the Antibacterial Activity of N,N,N-Trimethyl Chitosan (TMC).

N,N,N-trimethyl chitosan (TMC) with 93% degree of trimethylation was synthesized. TMC and the chitosan starting material were subjected to acidic hydrolysis to produce 49 different samples with a reduced average molecular weight (Mw) ranging from 2 to 144 kDa. This was done to allow the investigation of the relationship between antibacterial activity and Mw over a wide Mw range. NMR investigation showed that hydrolysis did not affect the degree of trimethylation (DSTRI) or the structure of the polymer backbone. The activity of TMC against Staphylococcus aureus (S. aureus) increased sharply with Mw until a certain Mw value (critical Mw for high activity, CMW) was reached. After the CMW, the activity was not affected by a further increase in the Mw. A similar pattern of activity was observed for chitosan. The CMW was determined to be 20 kDa for TMC and 50 kDa for chitosan.

Quaternary Ammoniumyl Chitosan Derivatives for Eradication of Staphylococcus aureus Biofilms.

Bacterial biofilms tolerate extreme levels of antibiotics. Treatment of biofilm infections therefore requires the development of new or modified antimicrobials that can penetrate biofilms and are effective against dormant persistent cells. One such new approach uses the biodegradable biopolymer chitosan and its derivatives as antimicrobials. In this study, we performed synthetic modification of chitosan to selectively introduce different cationic and hydrophobic moieties at varying ratios on chitosan. This improved its aqueous solubility and antimicrobial activity toward bacterial biofilms. Initial evaluation of the chitosan derivatives showed increased activity toward planktonic Staphylococcus aureus. The effect of the quaternary ammoniumyl chitosan derivatives against Staphylococcus aureus biofilms was more variable. The most effective derivatives contained hydrophobic groups, and their efficacy against biofilms depended on the ratio and length of the alkyl chains. Three-dimensional imaging of biofilms confirmed the accessibility and antimicrobial effect of chitosan derivatives with alkyl chains in the full depth of the biofilms.

Antimicrobial Chitosan and Chitosan Derivatives: A Review of the Structure-Activity Relationship.

This review gives an updated overview of the current state-of-the-art for antimicrobial chitosan and chitosan derivatives and the effects of structural modifications on activity and toxicity. The various synthetic routes introduced for chemical modification of chitosan are discussed, and the most common functional groups are highlighted. Different analytical techniques used for structural characterization of the synthesized chitosan derivatives are discussed and critically evaluated. For the purpose of this review, the antimicrobial chitosan derivatives have been classified on the basis of the type of functional group conjugated to the polymer backbone. In each case, the influence of the degree of substitution on the biological properties has been examined. Finally, we have summarized the collective information and suggested future directions for further research to improve our understanding of the bioactivity and to develop more useful chitosan conjugates.

Experimental design for determining quantitative structure activity relationship for antibacterial chitosan derivatives.

Experimental design approach was successfully used to guide the synthesis and determine the structure-activity relationship for antimicrobial derivatives of the biopolymer chitosan. Specialized software with D-optimal design capabilities was used to create a library of chitosan derivatives with optimal structural variation in order to conduct a detailed investigation of the structure-activity relationship. The derivatives contain three substituents: N,N,N-trimethylamine, N-acetyl and N-stearoyl at different degrees of substitution (DS) on the 2-amino group of chitosan. The design matrix consisted of 14 target materials that were synthesized in 'one-pot synthesis' using TBDMS-chitosan as the precursor to allow precise control of the DS. The antibacterial activity (MIC) towards the Gram positive bacteria Staphylococcus aureus and the Gram negative bacteria Escherichia coli, hemolytic activity (HC50) towards human red blood cells and solubility of the chitosan derivatives were used as the responses in the model. The response surface model was refined by removing the interaction terms to improve the statistical significance and predictive power of the model. The investigation showed that materials with DS for trimethylation in the range 0.45-0.65, acetylation in the range 0.08-0.33 and stearoylation in the range 0.22-0.29 were capable of showing high antimicrobial activity, high solubility and low hemolytic activity.

Antimicrobial peptide shows enhanced activity and reduced toxicity upon grafting to chitosan polymers.

Here we report that grafting of a short antimicrobial peptide, anoplin, to chitosan polymers is a strategy for abolishing the hemolytic propensity, and at the same time increasing the activity of the parent peptide. Anoplin-chitosan conjugates were synthesized by CuAAC reaction of multiple peptides through 2-azidoacetyl groups on chitosan.

Synthesis of guanidinylated chitosan with the aid of multiple protecting groups and investigation of antibacterial activity.

A new synthetic approach employing two types of protecting groups, tertiarybutyldimethylsilyl (TBDMS) and tertiarybutyloxycarbonyl (Boc) was developed to obtain a series of guanidinylated chitosan derivatives. The synthesis was carried out in organic solvents which allowed quantitative reaction, a good control on the degree of substitution, and 100% substitution of the chitosan amino groups. Similar derivatives carrying the trimethylammonium group were also synthesized as reference compounds. All the derivatives were characterized using (1)H and COSY NMR and IR spectroscopy. The antibacterial effect against clinically relevant strains of S. aureus and E. coli was found to increase with increase in the degree of substitution and decrease in the spacer length of the derivatives in both the series. An optimum activity could be obtained at a degree of substitution above 0.5 for most derivatives. The trimethylammonium derivatives showed slightly higher activity than the corresponding guanidinium derivatives but a similar structure-activity relationship was obtained.

Impact of chain length on antibacterial activity and hemocompatibility of quaternary N-alkyl and n,n-dialkyl chitosan derivatives.

A highly efficient method for chemical modification of chitosan biopolymers by reductive amination to yield N,N-dialkyl chitosan derivatives was developed. The use of 3,6-O-di-tert-butyldimethylsilylchitosan as a precursor enabled the first 100% disubstitution of the amino groups with long alkyl chains. The corresponding mono N-alkyl derivatives were also synthesized, and all the alkyl compounds were then quaternized using an optimized procedure. These well-defined derivatives were studied for antibacterial activity against Gram positive S. aureus, E. faecalis, and Gram negative E. coli, P. aeruginosa, which could be correlated to the length of the alkyl chain, but the order was dependent on the bacterial strain. Toxicity against human red blood cells and human epithelial Caco-2 cells was found to be proportional to the length of the alkyl chain. The most active chitosan derivatives were found to be more selective for killing bacteria than the quaternary ammonium disinfectants cetylpyridinium chloride and benzalkonium chloride, as well as the antimicrobial peptides melittin and LL-37.

The effect of substituent, degree of acetylation and positioning of the cationic charge on the antibacterial activity of quaternary chitosan derivatives.

A series of water-soluble cationic chitosan derivatives were prepared by chemoselective functionalization at the amino group of five different parent chitosans having varying degrees of acetylation and molecular weight. The quaternary moieties were introduced at different alkyl spacer lengths from the polymer backbone (C-0, C-2 and C-6) with the aid of 3,6-di-O-tert-butyldimethylsilyl protection of the chitosan backbone, thus allowing full (100%) substitution of the free amino groups. All of the derivatives were characterized using 1H-NMR, 1H-1H COSY and FT-IR spectroscopy, while molecular weight was determined by GPC. Antibacterial activity was investigated against Gram positive S. aureus and Gram negative E. coli. The relationship between structure and activity/toxicity was defined, considering the effect of the cationic group's structure and its distance from the polymer backbone, as well as the degree of acetylation within a molecular weight range of 7-23 kDa for the final compounds. The N,N,N-trimethyl chitosan with 100% quaternization showed the highest antibacterial activity with moderate cytotoxicity, while increasing the spacer length reduced the activity. Trimethylammoniumyl quaternary ammonium moieties contributed more to activity than 1-pyridiniumyl moieties. In general, no trend in the antibacterial activity of the compounds with increasing molecular weight or degree of acetylation up to 34% was observed.