The Development of the Regenerable Catalytic System in Selective Catalytic Oxidation of Ammonia with High N2 Selectivity.

Supported particulate noble-metal catalysts are widely used in industrial catalytic reactions. However, these metal species, whether in the form of nanoparticles or highly dispersed entities, tend to aggregate during reactions, leading to a reduced activity or selectivity. Addressing the frequent necessity for the replacement of industrial catalysts remains a significant challenge. Herein, we demonstrate the feasibility of the 'regenerable catalytic system' exemplified by selective catalytic oxidation of ammonia (NH3-SCO) employing Ag/Al2O3 catalysts. Results demonstrate that our highly dispersed Ag catalyst (Ag HD) maintains >90% N2 selectivity at 80% NH3 conversion and >80% N2 selectivity at 100% NH3 conversion after enduring 5 cycles of reducible aggregation and oxidative dispersion. Moreover, it consistently upholds over 98% N2 selectivity at 100% NH3 conversion after 10 cycles of Ar treatment. During the aggregation-dispersion process, the Ag HD catalyst intentionally aggregated into Ag nanoparticles (Ag NP) after H2 reduction and exhibited remarkable regenerable capabilities, returning to the Ag HD state after calcination in the air. This structural evolution was characterized through in situ transmission electron microscopy, atomically resolved high-angle annular dark-field scanning transmission electron microscopy, and X-ray absorption spectroscopy, revealing the on-site oxidative dispersion of Ag NP. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy provided insights into the exceptional N2 selectivity on Ag HD catalysts, elucidating the critical role of NO+ intermediates. Our findings suggest a sustainable and cost-effective solution for various industry applications.

Unveiling the Origin of Fast Hydride Ion Diffusion at Grain Boundaries in Nanocrystalline TiN Membranes.

Nanocrystalline titanium nitride (TiN) has been determined to be a promising alternative to noble metal palladium (Pd) for fabricating base membranes for the energy-efficient production of pure hydrogen. However, the mechanism of transport of hydrogen through a TiN membrane remains unclear. In this study, we established an atomistic model of the transport of grain boundary hydride ions through such a membrane. High-resolution transmission electron microscopy and X-ray reflectivity confirmed that a nanocrystalline TiN1.0 membrane with a (100) preferred growth orientation retained about 4 Å-wide interfacial spaces along its grain boundaries. First-principles calculations based on the density functional theory showed that these grain boundaries allowed the diffusion of interfacial hydride ion defects with very small activation barriers (<12 kJ mol-1). This was substantiated by the experiment. In addition, the narrow boundary produced a sieving effect, resulting in a selective H permeation. Both the experimental and theoretical results confirmed that the granular microstructures with the 4 Å-wide interlayer enabled the transition metal nitride to exhibit pronounced hydrogen permeability.

Effect of Silver Diamine Fluoride on Bonding Performance and Ultra-morphological Characteristics to Sound Dentin.

OBJECTIVES: This study aimed to evaluate microtensile bond strength (µTBS) and ultra-morphological characteristic changes in sound dentin resulting from silver diamine fluoride (SDF) when using adhesives. METHODS: Ninety-six extracted human third molars were divided into the SDF-contaminated dentin group and the sound dentin group. In the SDF-contaminated dentin group, 38% SDF was agitated for 1 min, left undisturbed for 2 min, and rinsed with distilled water for 30 s. Then, each group was further subdivided into six subgroups (n = 8 / group) according to application modes: self-etch mode (SE) and etch-and-rinse mode (ER) followed by three adhesives: (1) Scothbond Universal Plus Adhesive (SUP); (2) G2-Bond Universal Adhesive (G2B); and (3) Clearfil Mega Bond 2 (MB2). All specimens were restored with resin composite and were stored in distilled water for 24 h before µTBS testing. Data from the µTBS test were analyzed using Three-way ANOVA and Duncan test (p < 0.05). The morphology of fractured surface and adhesive-dentin interfaces were evaluated by SEM, TEM, and STEM. Further elemental analysis was done by EDX. RESULTS: All SDF-contaminated dentin groups demonstrated significantly lower µTBS than sound dentin groups. All ER groups had higher µTBS than SE groups, except for G2B in the sound dentin group. STEM/EDX revealed an SDF-dentin-reacted layer in the SDF-contaminated dentin group. SIGNIFICANCE: SDF had an adverse effect on adhesives. Additionally, ER mode is preferable when bonded to SDF-contaminated dentin. A calcium and fluoride-contained layer was observed in all SDF-contaminated dentin.

Shell-Driven Localized Oxide Nanoparticles Determine the Thermal Stability of Microencapsulated Phase Change Material.

Not all encapsulation techniques are universally apt for every type of phase change material (PCM), highlighting the imperative for methodological precision. This study addresses the challenges of microencapsulated PCM (MEPCM) arising from the immiscible pairing of α-Al2O3 nanoparticles with Sn microparticles. The high-speed impact blending (HIB) dry synthesis technique is employed, facilitating large-volume production of Sn@α-Al2O3 MEPCMs. The resulting MEPCMs not only seamlessly endure 100 cycles of melting-solidification but also, with the strategic incorporation of a glass frit, exhibit remarkable thermal durability, withstanding up to 1000 melting-solidification cycles. Even under ultrafast thermal fluctuations, the α-Al2O3 shell remained resilient through 100 cycles. A marked reduction in supercooling is observed, which is attributed to the formation of SnO and SnO2 nanoparticles within the α-Al2O3 crystal lattice. The atomically resolved interface dynamics between SnO2 and α-Al2O3 play a pivotal role, lowering the energy barrier for Sn nuclei formation during solidification. This affects the accelerated Sn nucleation rate, effectively suppressing supercooling. Such insights offer a deeper understanding of the interplay between nanoscale crystal lattice imperfections and their implications for energy storage applications.

Decoration of Gold and Platinum Nanoparticle Catalysts by 1 nm Thick Metal Oxide Overlayer and Its Effect on the CO Oxidation Activity.

Exfoliated M-Al layered double hydroxide (M-Al LDH; M = Mg, Co, Ni, and Zn) nanosheets were adsorbed on Au/SiO2 and calcined to transform LDH into mixed metal oxides (MMOs) and yield Au/SiO2 coated with a thin MMO overlayer. These catalysts showed a higher catalytic activity than pristine Au/SiO2. In particular, the 50% CO conversion temperature decreased by more than 250 °C for Co-Al MMO-coated Au/SiO2. In contrast, the deposition of CoAlOx on Au/SiO2 by impregnation or the deposition of Au on Co-Al MMO-coated SiO2 resulted in a worse catalytic activity. Moreover, the presence of a thick MMO overlayer decreased the catalytic activity, suggesting that the control of the overlayer thickness to less than 1 nm is a requisite for obtaining a high catalytic activity. Moreover, the thin Co-Al MMO overlayer on Au/SiO2 possessed abundant oxygen vacancies, which would play an important role in O2 activation, resulting in a highly active interface between Au and the defect-rich MMO on the Au NP surface. Finally, this can be applied to Pt/SiO2, and the obtained Co-Al MMO-coated Pt/SiO2 also exhibited a much improved catalytic activity for CO oxidation.

Effects of Short-Term Exposure of Chloramine-T Solution on the Characteristics of Light-Cured and Chemical-Cured Adhesives.

This study evaluated the effect of a 0.5% chloramine T solution on a chemical-cured universal adhesive by comparing the light-cured, one-step, self-etch adhesive for the bonding performance, mechanical properties, and resin-dentin interfacial characteristics. Caries-free human molars were randomly assigned into eight groups based on the bonding systems employed (Bond Force II, BF and Bondmer Lightless, BL), the immersion solutions used before bonding (0.5% chloramine T solution and distilled water), and the immersion durations (5 and 60 min). Microtensile bond strength (µTBS), nanoleakage evaluation, and nanoindentation tests were performed, and the surface morphology of the resin-dentin interface was examined using a focus ion beam/scanning ion microscopy system. Immersion in chloramine-T for 5 min significantly decreased the µTBS of Bondmer Lightless (from 22.62 to 12.87 MPa) compared with that in distilled water. Moreover, there was also a decreasing trend after immersing in chloramine-T for 60 min (from 19.11 to 13.93 MPa). Chloramine T was found to have no effect on the hardness, elastic modulus, or morphological characteristics of the ion-beam milled resin-dentin interfacial surfaces in the tested adhesives, suggesting that chloramine T might reduce the bond strength by interfering with the interaction and the sealing between the adhesive resin and dentin in the chemical-cured universal adhesive, albeit without affecting the mechanical properties.

Gold/Substituted Hydroxyapatites for Oxidative Esterification: Control of Thin Apatite Layer on Gold Based on Strong Metal-Support Interaction (SMSI) Results in High Activity.

Gold nanoparticles (Au NPs) deposited on various cation- and anion-substituted hydroxyapatites (Au/sHAPs) show oxidative strong metal-support interaction (SMSI), wherein a thin layer of the sHAP covered the surface of the Au NPs by heat treatment in an oxidative atmosphere. Calcination of Au/sHAPs at 300 °C caused a partial SMSI and that at 500 °C gave fully encapsulated Au NPs. We investigated the influence of the substituted ions in sHAP and the degree of the oxidative SMSI on the catalytic performance of Au/sHAPs for oxidative esterification of octanal or 1-octanol with ethanol to obtain ethyl octanoate. The catalytic activity depends on the size of the Au NPs but not on the support used, owing to the similarity of the acid and base properties of sHAPs except for Au/CaFAP. The presence of a large number of acidic sites on CaFAP lowered the product selectivity, but all other sHAPs exhibited similar activity when the Au particle size was almost the same, owing to the similarity of the acid and base properties. Au/sHAPs_O2 with SMSI exhibited higher catalytic activity than Au/sHAPs_H2 without SMSI despite the fact that the number of exposed surface Au atoms was decreased by the SMSI. In addition, the oxidative esterification reaction proceeded even though the Au NPs were fully covered by the sHAP layer when the thickness of the layer was controlled to be less than 1 nm. The substrate can access the surfaces of the Au NPs covered by the thin sHAP layer (<1 nm), and the presence of the sHAP structure in close contact with the Au NPs resulted in significantly higher catalytic activity compared with that for fully exposed Au NPs deposited on the sHAPs. This result suggests that maximizing the contact area between the Au NPs and the sHAP support based on the SMSI enhances the catalytic activity of Au.

Bulk tungsten-substituted vanadium oxide for low-temperature NOx removal in the presence of water.

NH3-SCR (selective catalytic reduction) is important process for removal of NOx. However, water vapor included in exhaust gases critically inhibits the reaction in a low temperature range. Here, we report bulk W-substituted vanadium oxide catalysts for NH3-SCR at a low temperature (100-150 °C) and in the presence of water (~20 vol%). The 3.5 mol% W-substituted vanadium oxide shows >99% (dry) and ~93% (wet, 5-20 vol% water) NO conversion at 150 °C (250 ppm NO, 250 ppm NH3, 4% O2, SV = 40000 mL h-1 gcat-1). Lewis acid sites of W-substituted vanadium oxide are converted to Brønsted acid sites under a wet condition while the distribution of Brønsted and Lewis acid sites does not change without tungsten. NH4+ species adsorbed on Brønsted acid sites react with NO accompanied by the reduction of V5+ sites at 150 °C. The high redox ability and reactivity of Brønsted acid sites are observed for bulk W-substituted vanadium oxide at a low temperature in the presence of water, and thus the catalytic cycle is less affected by water vapor.

Effect of conditioning and 1 year aging on the bond strength and interfacial morphology of glass-ionomer cement bonded to dentin.

OBJECTIVE: The purpose of this study was to determine the bond stability and the change in interfacial ultra-structure of a conventional glass-ionomer cement bonded to dentin, with and without pre-treatment using a polyalkenoic acid conditioner. METHODS: The occlusal dentin surfaces of six teeth were ground flat. Glass-ionomer cement was bonded to the surfaces either with or without polyalkenoic acid conditioning. The teeth were sectioned into 1-mm2 stick-shaped specimens. The specimens obtained were randomly assigned to two groups with different periods of storage in water: 1 week and 1 year. The micro-tensile bond strength (µTBS) was determined for each storage time. Additional specimens were prepared for Transmission Electron Microscopy (TEM); they were produced with or without prior polyalkenoic acid conditioning in the same way as in the µTBS test. RESULTS: There was no significant difference in µTBS to conditioned dentin and non-conditioned dentin (p > 0.05). The failures appeared to be of a mixed nature, although aging caused more areas of cohesive than adhesive failure in both groups. The TEM observation showed an intermediate layer, a matrix-rich layer and a partially demineralized layer in the polyalkenoic acid conditioned group. SIGNIFICANCE: Aging did not reduce the bond strength of the conventional glass-ionomer cement to dentin with or without the use of a polyalkenoic acid conditioner.

Exploration of Long-Life Pt/Heteroatom-Doped Graphene Catalysts in Hydrogen Atmosphere.

We investigated the H and H2 adsorption effects on the stability of a Pt atom on various heteroatom-doped graphene supports using first-principles calculations based on density functional theory. We show that H and H2 adsorptions on the Pt atom weaken the interaction between the Pt atom and graphene support and decrease the adsorption energy of Pt atoms. H2 adsorption on Pt atoms decreases the adsorption energy of Pt atoms on all graphene supports by more than 30%, whereas H adsorption only affects pristine, O-, and S-doped graphene. These results indicate that the hydrogen atmosphere enhances the detachment of Pt catalysts. However, the B-, O-, Si-, P-doped, and monovacant graphene still maintained large adsorption energies of PtH and PtH2 of more than 1.5 eV. In addition, the diffusion barriers of PtH and PtH2 on pristine graphene were calculated to be less than 0.07 eV, which further demonstrated that H and H2 enhance the degradation of Pt catalysts. Even after H and H2 adsorptions on a Pt atom, O-, Si-, P-doped, and monovacant graphene still maintained large diffusion barriers of more than 1 eV. Therefore, we concluded that O-, Si-, and P-doped graphene are suitable supports for Pt catalysts in a hydrogen atmosphere.

Hydrogen Isotope Absorption in Unary Oxides and Nitrides with Anion Vacancies and Substitution.

The absorption states of hydrogen isotopes in various ceramic materials were investigated by density functional theory. For pristine ceramic materials, main-group oxides do not form any bond with a hydrogen atom. However, transition metal oxides form hydroxyl groups and absorb hydrogen atoms. Main-group and transition metal nitrides form ionic bonds between a hydrogen atom and the surrounded cation. For anion-deficient ceramic materials, hydrogen atoms are negatively charged because of excess electrons induced by anion vacancies, and ionic bonds form with the surrounded cation, which stabilizes the hydrogen absorption state. N substitutional doping into oxides introduces an electron hole, while O substitutional doping into the nitrides introduces an excess of electrons. Therefore, hydrogen isotopes form covalent bonds in N-substituted oxides, and form hydride ions in O-substituted nitrides. Thus, Al2 O3 , SiO2 , CrN, and TiN are promising materials as hydrogen permeation barriers.

Solution-Plasma-Mediated Synthesis of Si Nanoparticles for Anode Material of Lithium-Ion Batteries.

Silicon anodes have attracted considerable attention for their use in lithium-ion batteries because of their extremely high theoretical capacity; however, they are prone to extensive volume expansion during lithiation, which causes disintegration and poor cycling stability. In this article, we use two approaches to address this issue, by reducing the size of the Si particles to nanoscale and incorporating them into a carbon composite to help modulate the volume expansion problems. We improve our previous work on the solution-plasma-mediated synthesis of Si nanoparticles (NPs) by adjusting the electrolyte medium to mild buffer solutions rather than strong acids, successfully generating Si-NPs with <10 nm diameters. We then combined these Si-NPs with carbon using MgO-template-assisted sol-gel combustion synthesis, which afforded porous carbon composite materials. Among the preparations, the composite material obtained from the LiCl 0.2 M + H3BO3 0.15 M solution-based Si-NPs exhibited a high reversible capacity of 537 mAh/g after 30 discharge/charge cycles at a current rate of 0.5 A/g. We attribute this increased reversible capacity to the decreased particle size of the Si-NPs. These results clearly show the applicability of this facile and environmentally friendly solution-plasma technique for producing Si-NPs as an anode material for lithium-ion batteries.

Carbon Monoxide Oxidation by Polyoxometalate-Supported Gold Nanoparticulate Catalysts: Activity, Stability, and Temperature- Dependent Activation Properties.

Nanoparticulate gold supported on a Keggin-type polyoxometalate (POM), Cs4 [α-SiW12 O40 ]⋅n H2 O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was -67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U-shaped curve. It was revealed by IR measurement that Auδ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas-phase reactions.

Synthesis of ε-Keggin-Type Cobaltomolybdate-Based 3D Framework Material and Characterization Using Atomic-Scale HAADF-STEM and XANES.

We describe the preparation of ε-Keggin-type cobaltomolybdate-based 3D frameworks with sodium cations, NaH9[ε-CoIIMoV8MoVI4O40CoII2], and their characterization by high-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption fine structure (XAFS) spectroscopy. Atomic-scale HAADF-STEM images of ε-Keggin compounds were obtained for the first time, and positions of Mo and Co were confirmed. Furthermore, clear evidence of the presence of a CoO4 tetrahedron was obtained by X-ray absorption near-edge structure (XANES) analysis. Their characterization clearly revealed that ε-Keggin-type cobaltomolybdate units, [ε-CoMo12O40]n-, constructed by a central CoIIO4 tetrahedron and 12 surrounding MoO6 octahedra, are linked with CoII to form 3D frameworks.

Three-dimensional analysis of Eu dopant atoms in Ca-α-SiAlON via through-focus HAADF-STEM imaging.

Three-dimensional (3D) distributional analysis of individual dopant atoms in materials is important to development of optical, electronic, and magnetic materials. In this study, we adopted through-focus high-angle annular dark-field (HAADF) imaging for 3D distributional analysis of Eu dopant atoms in Ca-α-SiAlON phosphors. In this context, the effects of convergence semi-angle and Eu z-position on the HAADF image contrast were investigated. Multi-slice image simulation revealed that the contrast of the dopant site was sensitive to change of the defocus level. When the defocus level matched the depth position of a Eu atom, the contrast intensity was significantly increased. The large convergence semi-angle greatly increased the depth resolution because the electron beam tends spread instead of channeling along the atomic columns. Through-focus HAADF-STEM imaging was used to analyze the Eu atom distribution surrounding 10nm cubes with defocus steps of 0.68nm each. The contrast depth profile recorded with a narrow step width clearly analyzed the possible depth positions of Eu atoms. The radial distribution function obtained for the Eu dopants was analyzed using an atomic distribution model that was based on the assumption of random distribution. The result suggested that the Ca concentration did not affect the Eu distribution. The decreased fraction of neighboring Eu atoms along z-direction might be caused by the enhanced short-range Coulomb-like repulsive forces along the z-direction.

Carbon nanohorns allow acceleration of osteoblast differentiation via macrophage activation.

Carbon nanohorns (CNHs), formed by a rolled graphene structure and terminating in a cone, are promising nanomaterials for the development of a variety of biological applications. Here we demonstrate that alkaline phosphatase activity is dramatically increased by coculture of human monocyte derived macrophages (hMDMs) and human mesenchymal stem cells (hMSCs) in the presence of CNHs. CNHs were mainly localized in the lysosome of macrophages more than in hMSCs during coculturing. At the same time, the amount of Oncostatin M (OSM) in the supernatant was also increased during incubation with CNHs. Oncostatin M (OSM) from activated macrophage has been reported to induce osteoblast differentiation and matrix mineralization through STAT3. These results suggest that the macrophages engulfed CNHs and accelerated the differentiation of mesenchymal stem cells into the osteoblast via OSM release. We expect that the proof-of-concept on the osteoblast differentiation capacity by CNHs will allow future studies focused on CNHs as ideal therapeutic materials for bone regeneration.

Measurement of the dielectric function of α-Al2O3 by transmission electron microscopy - Electron energy-loss spectroscopy without Cerenkov radiation effects.

The dielectric function of α-Al2O3 was measured by electron energy-loss spectroscopy (EELS) coupled with the difference method. The influence of Cerenkov radiation was significant in measurements using a 200kV transmission electron microscope (TEM) and the correct dielectric function could not be obtained using the conventional EELS procedure. However, a good agreement between the optical data and EELS for the dielectric functions was obtained via a 60kV TEM. Combining EELS and the difference method, however, provided an accurate measurement of the dielectric function for α-Al2O3 even at an accelerating voltage of 200kV. The combination of EELS and the difference method in the nano-beam diffraction mode could derive an accurate dielectric function with superior spatial resolution regardless of the occurrence of Cerenkov radiation.

Improving the measurement of dielectric function by TEM-EELS: avoiding the retardation effect.

We investigated an improved Kramers-Kronig analysis (KKA) routine for measuring the dielectric function of α-Al2O3, avoiding the retardation effect arising in electron energy-loss spectroscopy (EELS). The EELS data differed from the optical data in the energy range of 10-20 eV due to the retardation effect, even though Cerenkov loss was thoroughly suppressed. The calculated differential cross-section indicates that the influence of the retardation appears at scattering angles less than 0.2 mrad in the loss energy range of 10-15 eV. Using the improved KKA routine, we obtained the correct dielectric function that agreed with the optical data. The present technique is especially useful in measuring the dielectric function by EELS with a small collection semi-angle.

Estimating the dopant distribution in Ca-doped α-SiAlON: statistical HAADF-STEM analysis and large-scale atomic modeling.

We investigated the dopant distribution in Ca-doped α-SiAlON by using high-angle annular dark-field scanning transmission electron microscopy and a multi-slice image simulation. Our results showed that the electron wave propagated by hopping to adjacent Si(Al) and N(O) columns. The image intensities of the Ca columns had wider dispersions than other columns. To estimate the Ca distribution in the bulk material, we performed a Monte Carlo atomic simulation of the α-SiAlON with Ca dopants. A model including a short-range Coulomb-like repulsive force between adjacent Ca atoms reproduced the dispersion of the intensity distribution of the Ca column in the experimental image.

Ultrathin inorganic molecular nanowire based on polyoxometalates.

The development of metal oxide-based molecular wires is important for fundamental research and potential practical applications. However, examples of these materials are rare. Here we report an all-inorganic transition metal oxide molecular wire prepared by disassembly of larger crystals. The wires are comprised of molybdenum(VI) with either tellurium(IV) or selenium(IV): {(NH4)2[XMo6O21]}n (X=tellurium(IV) or selenium(IV)). The ultrathin molecular nanowires with widths of 1.2 nm grow to micrometre-scale crystals and are characterized by single-crystal X-ray analysis, Rietveld analysis, scanning electron microscopy, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, thermal analysis and elemental analysis. The crystals can be disassembled into individual molecular wires through cation exchange and subsequent ultrasound treatment, as visualized by atomic force microscopy and transmission electron microscopy. The ultrathin molecular wire-based material exhibits high activity as an acid catalyst, and the band gap of the molecular wire-based crystal is tunable by heat treatment.