Potentially toxic metal contamination and microbial community analysis in an abandoned Pb and Zn mining waste deposit.

Bioindicators have been widely used to assess the contamination of lead/zinc (Pb/Zn) in smelter areas, mining waste disposal areas and in areas containing slags from Pb ore smelting. In this context, the analysis involving microorganisms has gained prominence as a complementary tool in studies aimed at assessing contaminated sites. Therefore, the objective of this study was to assess the contamination of Pb, Zn and cadmium (Cd) in an area where a PbZn smelter operated, using the integration of geochemical and microbial data. The experimental analysis was conducted to characterize the soil collected at three different sites (samples NS, EW and EP). The analysis conducted was physicochemical, metal concentration, metal speciation and analysis of the microbial community through high-throughput sequencing technique. Through the results it was observed that the high concentrations of metals altered the bacterial community present in the soil. Differences were noted between the microbial communities according to the sampling site, especially in sample EP, collected at the margin of the dirt road, which presented higher metal concentrations and microbial diversity. The main phyla detected in the samples were: Proteobacteria, Bacteroidetes and Acidobacteria. Bacteria tolerant to the presence of potentially toxic metals (PTM), such as Rhodoplanes, Kaistobacter, Sphingomonas and Flavisolibacter were identified in the analyzed samples. The phylogenetic groups identified in the study area are similar to those obtained in other studies in metal contaminated areas. The differences between the bacterial communities in each sample indicate that the concentration of PTM may have influenced the microbial community in the soil. Thus, it is noted the importance of the integration of geochemical and microbial data to evaluate the impact of the improper disposal of high PTM concentrated slags in natural soils.

Microbial diversity and the implications of sulfide levels in an anaerobic reactor used to remove an anionic surfactant from laundry wastewater.

The objective of this study was to evaluate the removal of linear alkylbenzene sulfonate (LAS) from commercial laundry wastewater using an expanded granular sludge bed (EGSB) reactor with two specific LAS loading rates (SLLRs), 1.0 and 2.7 mg LAS gVS(-1)d (-1). The biomass was characterized using denaturing gradient gel electrophoresis (DGGE) and 16S Ion Tag sequencing. Higher LAS removal (92.9%) was observed in association with an SLLR of 1.0 mg LAS gVS(-1) d(-1) than with an SLLR of 2.7 mg LAS gVS(-1) d(-1) (58.6%). A relationship between the S(-2) concentration in the effluent and the surfactant removal efficiency was observed. This result is indicative of the inhibition of LAS-removing microbiota at S(-2) concentrations greater than 20 mg SL(-1). By using DGGE, microbial stratification was observed in the reactor in association with granule size, even though the reactor is considered to be a completely mixed regime. The RDP-classifier identified 175 genera, 33 of which were related to LAS degradation.

Analysis of a microbial community associated with polychlorinated biphenyl degradation in anaerobic batch reactors.

The degradation of polychlorinated biphenyls (PCBs) was investigated under fermentative-methanogenic conditions for up to 60 days in the presence of anaerobic biomass from a full-scale UASB reactor. The low methane yields in the PCBs-spiked batch reactors suggested that the biomass had an inhibitory effect on the methanogenic community. Reactors containing PCBs and co-substrates (ethanol/sodium formate) exhibited substantial PCB reductions from 0.7 to 0.2 mg mL(-1). For the Bacteria domain, the PCBs-spiked reactors were grouped with the PCB-free reactors with a similarity of 55 %, which suggested the selection of a specific population in the presence of PCBs. Three genera of bacteria were found exclusively in the PCB-spiked reactors and were identified using pyrosequencing analysis, Sedimentibacter, Tissierela and Fusibacter. Interestingly, the Sedimentibacter, which was previously correlated with the reductive dechlorination of PCBs, had the highest relative abundance in the RCS-PCB (7.4 %) and RCS-PCB-PF (12.4 %) reactors. Thus, the anaerobic sludge from the UASB reactor contains bacteria from the Firmicutes phylum that are capable of degrading PCBs.

Microbial characterization and removal of anionic surfactant in an expanded granular sludge bed reactor.

This study evaluated linear alkylbenzene sulfonate removal in an expanded granular sludge bed reactor with hydraulic retention times of 26 h and 32 h. Sludge bed and separator phase biomass were phylogenetically characterized (sequencing 16S rRNA) and quantified (most probable number) to determine the total anaerobic bacteria and methanogenic Archaea. The reactor was fed with a mineral medium supplemented with 14 mg l(-1)LAS, ethanol and methanol. The stage I-32 h consisted of biomass adaptation (without LAS influent) until reactor stability was achieved (COD removal >97%). In stage II-32 h, LAS removal was 74% due to factors such as dilution, degradation and adsorption. Higher HRT values increased the LAS removal (stage III: 26 h - 48% and stage IV: 32 h - 64%), probably due to increased contact time between the biomass and LAS. The clone libraries were different between samples from the sludge bed (Synergitetes and Proteobacteria) and the separator phase (Firmicutes and Proteobacteria) biomass.

Evaluation of the anaerobic degradation of black liquor from a Kraft pulp plant with addition of organic co-substrates.

The purpose of this study was to assess the anaerobic degradation of black liquor with and without additional carbon sources. Batch experiments were conducted using black liquor, from an integrated pulp and paper mill adding ethanol, methanol and nutrients. The PCR/DGGE technique was used to characterize the structure of the microbial community. The addition of extra sources of carbon did not significantly influence the degradation of black liquor under the conditions evaluated and the microbial community was similar in all experiments. It was observed an increase in some members of the archaeal in reactors that had the best efficiencies for removal of black liquor (around 7.5%). Either ethanol or methanol can be used as co-substrates because the produce the same quantitative and qualitative effect.

Biofilm adaptation to sulfate reduction in anaerobic immobilized biomass reactors sujected to different COD/sulfate ratios.

Various aspects of biofilm adaptation to sulfate reduction in horizontal-flow anaerobic immobilized biomass (HAIB) reactors subjected to increasing sulfate concentrations and different COD/sulfate ratios are presented and discussed. Four bench-scale HAIB reactors filled with vegetal carbon (R1 and R2) and polyurethane foam matrices (R3 and R4) were utilized. Influent sulfate concentrations ranging from 500 to 3000 mg/L were applied at COD/sulfate ratios ranging from 5.0 to 1.7. Reactors R1 and R4 were operated with higher sulfate loads than those applied to R2 and R3. For the same COD/sulfate ratio, the highest sulfate reduction efficiency (approximately 80%) was displayed by the vegetal carbon reactor (R2) subjected to low sulfate loads. According to the results of our molecular biology analyses, the different support materials provided different biomass colonization conditions. The lowest diversity of sulfate-reducing bacteria was found in the HAIB filled with polyurethane foam matrices operating with high sulfate loads.