Morphometric analysis of odontoid process among Arab population: a retrospective cone beam CT study.

Objective: This study aims to evaluate the feasibility of using cone beam computed tomography (CBCT) scans to assess the odontoid process diameter in the Arab population and to determine whether one or two cortical screws can be used for treating odontoid fractures. Methods: The odontoid process of 142 individuals aged 12-75 years, including 72 males (mean age: 35.5) and 70 females (mean age: 36.2), were analyzed using CBCT scans. The sagittal and coronal CBCT views were used to evaluate the antero-posterior (AP) and transverse diameters of the odontoid process. Results: Males had substantially bigger transverse and AP diameters of the odontoid process than females (p < 0.05 & P < 0.01 respectively). Among the sample, 97 individuals (67.4%) had external transverse diameter (METD) of less than 9 mm which is slightly bigger than that of Indians and 48 individuals (31.83%) had enough room for two 3.5 mm or two 2.7 mm screws as their METD was more than 9 mm like that of Greek and Turkish. Age had no significant impact on the morphometric measurements of the odontoid process. Conclusion: More than sixty percent of the sample had METDs of less than 9 millimeters, indicating that a single 4.5-mm Herbert screw may be suggested for fixing fractured odontoid processes in the Arab population.

A Pilot Study of Preparedness of Dentists in the United Arab Emirates to Deal with Medical Emergencies.

OBJECTIVES: The purpose of this pilot study is to assess the United Arab Emirates dentists' preparedness to manage medical emergencies. MATERIALS AND METHODS: Ninety-seven licensed dentists participated in this study. Dentists responded to self-administrated questionnaires that contained 23 questions divided into five parts. The first part collected data on participants' sex, years of experience, and whether they are general dental practitioner (GDP) or specialists. The second part included seven questions that asked participants to indicate if they took medical history, obtained vital signs, and attended basic life support courses. The third part included six multiple choice questions regarding the availability of emergency drugs in the dental clinic. The fourth part consisted of three multiple-choice questions that assessed the dentists' immediate response to a medical emergency. Finally, the fifth part comprised four questions to evaluate the dentists' knowledge of proper treatment of special emergency cases they may encounter in the dental offices. RESULTS: Out of the 97 participants, only 51% (N = 49) indicated that they can handle emergencies such as anaphylactic shock and syncope in the dental office. The majority of the dentists (80%) indicated that they have emergency kits. Only 46% of the specialists and 42% of the GDPs were able to correctly plan extractions in a patient with a prosthetic heart valve. Less than half of the participants (N = 35, 36%) were able to correctly answer the question regarding management of a foreign-body aspiration by attempting Heimlich/Triple maneuver. CONCLUSIONS: Within the limitations of this study, dentists need further hands-on training to improve their skills and knowledge about medical emergencies that could occur in the dental settings. Furthermore, we recommend that guidelines should be available in the clinic to strengthen the dentists' ability to deal with medical emergencies.

Er:YAG Laser Debonding of Lithium Disilicate Laminate Veneers: Effect of Laser Power Settings and Veneer Thickness on The Debonding Time and Pulpal Temperature.

Introduction: Er:YAG laser is a non-destructive tool for debonding of laminate veneers. This study investigated the effect of different laser powers on the pulp temperature and the time required to perform the debonding of lithium disilicate laminate veneers with different thicknesses. Methods: The labial enamel of 48 maxillary central incisors was flattened and polished. The teeth were restored with flat lithium disilicate ceramic veneers (4.0 mm×6.0 mm) with one of two different thicknesses (0.5 and 1.0 mm). Veneer debonding was performed with an Er:YAG laser with a wavelength of 2940 nm, pulse duration of 100 µm (VSP mode), 10 Hz, and one of the three laser power settings: 1.5 W (150 mJ), 3.0 W (300 mJ). and 5.4 W (540 mJ) (n=8). Veneer detachment time and intra-pulp temperature change (ΔT) were measured. Statistical analysis was performed using the two-way ANOVA and Bonferroni's post hoc test (α=0.05). The correlation between debonding time and temperature change was calculated using Pearson's correlation. Results: The longest time was recorded to remove the 1.0-mm veneer at 1.5 W (P<0.05) and the shortest time was recorded when deboning the 0.5 mm veneer with 5.4 W (P<0.05). ΔT decreased significantly with increasing laser power. A low correlation was found between time and ΔT (R2=0.113). Conclusion: Laser power and veneer thickness are important factors for veneer debonding; thinner veneers are removed faster. When debonding thick veneers, 5.4W laser power is more efficient and causes fewer changes to the pulp temperature.

Management of dry socket with low-level laser therapy.

OBJECTIVE: The aim of this study is to investigate the efficacy of delivering low-level laser therapy (LLLT) in the management of dry socket at University Dental Hospital Sharjah. MATERIALS AND METHOD: Forty-five patients with dry socket were divided into two treatment groups. Group I dry socket patients (n = 30) received conventional treatment while group II patients (n = 15) were irradiated with LLLT at a setting of 200-mW, 6-J, continuous-wave mode using an R02 tipless handpiece (Fotona Er:YAG, Europe), on the buccal, lingual, and middle surfaces of the socket for 30 s from a delivery distance of 1 cm. Pain score and quantification of granulation tissue in the socket were recorded at 0, 4, and 7 days post-dry socket treatment. RESULTS: Results showed that the LLLT-irradiated group II sockets showed a much lower VAS pain score of 1-2 as early as day 4, and a richer amount of granulation tissue compared to the conventional treated group I socket. The amount and rate of granulation tissue formation in the dry socket are inversely proportional to the pain score showing significant clinical effectiveness of LLLT on promoting the healing of the dry socket, with improvement in symptoms (P = .001). Conventionally treated dry sockets take at least 7 days to match the effective healing of an LLLT-irradiated dry socket. CONCLUSION: LLLT irradiation influences biomodulation of dry socket healing by dampening inflammation, promoting vascularization, stimulating granulation, and controlling pain symptoms. CLINICAL RELEVANCE: LLLT may be an additional effective tool for managing dry sockets in general dental practice.

Post COVID-19 lockdown: measures and practices for dental institutes.

Resuming regular clinical activities at dental premises after the COVID-19 lockdown period or post COVID-19 is likely to be a challenge for all dental institutes. When returning to the dental practice or training, staff and students alike should abide by the new rules and regulations. In the process of controlling viral spread, clinical dental facilities face a higher risk of disease transmission among patients as well as clinical and non-clinical staff. Aerosols formation and diffusion into the surrounding air can be a real concern of viral transmission, if no protective measures are established. We aim in this review to present the currently implemented measures and propose changes in clinical dental facilities to minimize the risk of transmission. Dental professionals should be prepared to treat every patient as a suspected COVID-19 carrier and be ready to receive and manage an overwhelming number of patients. We suggest that dental practices establish a sensible workforce shift schedule, improve ventilation levels, reduce dental aerosol generating procedures, and develop a comprehensive guidance to Healthcare Workers to reduce the risk of COVID-19 transmission.

A Comparative Clinical Study between Concentrated Growth Factor and Low-Level Laser Therapy in the Management of Dry Socket.

OBJECTIVE: A dry socket is a well-recognized complication of wound healing following tooth extraction. Its etiology is poorly understood and commonly occur among healthy patients. As such, management strategies for dry socket has always been empirical rather than scientific with varying outcome. The aim of this study is to investigate the efficacy of concentrated growth factor (CGF) and low-level laser therapy (LLLT) and compared them to the conventional treatment in the management of dry socket. MATERIALS AND METHODS: Sixty patients with one dry socket each, at University Dental Hospital Sharjah, were divided into three treatment groups based on their choice. In group I (n = 30), conventional treatment comprising of gentle socket curettage and saline irrigation was done. Group II (n = 15) dry sockets were treated with CGF and group III (n = 15) sockets were lased with LLLT. All dry socket patients were seen at day 0 for treatment and subsequently followed-up at 4, 7, 14, and 21 days. Pain score, perisocket inflammation, perisocket tenderness, and amount of granulation tissue formation were noted. STATISTICAL ANALYSIS: Data were analyzed as mean values for each treatment group. Comparisons were made for statistical analysis within the group and among the three groups to rank the efficacy of treatment using one-way analysis of variance (ANOVA). Statistically significant difference is kept at p < 0.05. RESULTS: Conventional treatment group I took more than 7 days to match the healing phase of group II CGF treated socket and group III LLLT irradiated socket (p = 0.001). When healing rate between CGF and LLLT are compared, LLLT group III showed a delay of 4 days compared with CGF in granulation tissue formation and pain control. CONCLUSION: CGF treated socket was superior to LLLT in its ability to generate 75% granulation tissue and eliminate pain symptom by day 7 (p = 0.001).

The Efficacy of Concentrated Growth Factor in the Healing of Alveolar Osteitis: A Clinical Study.

BACKGROUND: A dry socket also referred to as alveolar osteitis (AO) is a common postoperative complication following tooth extraction, due to the disruption of the clot within the wound. This study aimed to evaluate the efficacy of concentrated growth factor (CGF) in the healing of alveolar osteitis following tooth extraction. METHODS: The study was conducted at University Dental Hospital Sharjah, UAE. Patients undergoing tooth extraction at the oral surgery clinic were advised to return immediately if they suffer from pain. Over the following first week after tooth extraction, patients who reported pain symptoms were recalled and all dry sockets were identified. The patients were divided into two groups. Group I patients received conventional treatment with socket curettage and saline irrigation only, while in group II CGF was inserted into the socket. Both groups were observed for pain score and quantification of granulation tissue formation. RESULTS: A total of 40 dry socket patients, aged between 18 and 60 years, from a total of 1,250 patients, were included in the study. 30 patients were given conventional treatment while another 10 patients were given CGF. Patients who received CGF had a pain score of 7-10 at presentation, and the pain score dropped to 0-3 on day 4 and further improved to 0-1 on day 7 (p = 0.001). Granulation tissue formation appeared in the conventional group I on day 7 while the CGF group II showed earlier granulation tissue formation by day 4 (p = 0.001). The posttreatment pain score is inversely proportional to the amount and rate of granulation tissue formation in the socket. CONCLUSION: The study suggests that delivery of CGF into a dry socket helps relieve pain and expedite the wound healing process as shown by a statistically much lower pain score and earlier and more rapid formation of granulation tissue when compared to the conventional alveolar osteitis therapy.

Using erbium-doped yttrium aluminum garnet laser irradiation in different energy output levels versus ultrasonic in removal of root canal filling materials in endodontic retreatment.

OBJECTIVES: The objective of this study was to evaluate the efficacy of erbium-doped yttrium aluminum garnet (Er:YAG) laser irradiation in different energy outputs versus ultrasonic in gutta-percha removal during the endodontic retreatment. MATERIALS AND METHODS: A total of 21 extracted human lower premolars were divided into three groups (n = 7). Following the standardized preparation of the root canals with Wave One Rotary system and obturation with gutta-percha: Group I was treated with ultrasonic, Group II by Er:YAG laser with 40 mJ/Pulse, and Group III by Er:YAG laser with 50 mJ/Pulse for the removal of gutta-percha from the canals. Two extra teeth were treated by Er:YAG laser with 135 mJ/Pulse as control group. For all groups, time for gutta-percha removal was recorded. Samples were then splited into two halves and tested by scanning electron microscope and stereomicroscopic evaluation under different magnification power to observe the efficacy of each method used in the removal of gutta-percha. RESULTS: Statistical analysis of Kruskal-Wallis suggested that there are significant difference between the groups in relation to removal time (P < 0.05) and 2 × 2 Mann-Whitney U-test among the groups revealed that there is no significant difference between 40 and 50 mJ laser outputs (P > 0.05), but ultrasonic versus 40 and/or 50 mJ laser outputs were significantly different (P < 0.05). CONCLUSIONS: Er:YAG laser beam was not so efficient when compared to ultrasonic to reach the deeper parts of the canals as it was asserted, thermal side effects and burning damages were observed on the root canal dentinal walls. Moreover, the delivery system was not flexible enough to compensate the curvature of the canal system even though we used more straight canals as the sample ones as well as more time-consuming than the ultrasonic and more clinical time, rendering it to be less efficient in the removal of the obturation material during endodontic retreatment procedures.