Effect of Ligands on the Stability of Gold Nanoclusters.

Gold nanoclusters (AuNCs) are atomic architectures that can be precisely tailored for catalytic applications. In this work, we studied two benchmark AuNCs, Au25(SR)18 and Au144(SR)60, covered by aromatic and aliphatic ligands to envision how the 3D structure of the ligand impacts the stability of the nanomaterial. Surprisingly, we found that increasing the alkanethiol length has a poor or null effect on the stability of the AuNCs, a trend opposite to that on Au(111) surfaces. When considering the aromatic or aliphatic nature, the AuNC stability follows the same trend as on Au(111): the thermodynamical stability is dictated by the ligand density rather than its chemical nature, where the aliphatic ligand imparts more stability than the aromatic one. Our findings provide a tool to predict how an ultrasmall gold core can interact with the environment, substrate, and themselves according to the stability of its protecting ligand shell.

Gold adatoms modulate sulfur adsorption on gold.

Sulfur adsorption on Au(111) at high coverage has been studied by density functional calculations. In this case S species organize into rectangular structures containing 8 S atoms irrespective of the S source, which have been alternatively assigned to adsorbed monomeric S, adsorbed S2, adsorbed monomeric plus S2 species, and gold sulfide. We found that monomeric S at the high coverage organizes into S2 species that are stabilized into the 8-S structures by Au adatoms, forming gold disulfide complexes (Au-(S2)4). The Au atoms could be provided by decomposition of more diluted AuS3 containing phases, as recently proposed, and direct removal from terraces and step edges, both explaining the surface coverage of vacancy islands coexisting with the 8-S structures. The gold-disulfide complexes capture the disorder shown in the experimental STM images, explain the intrigued features of XPS, and also, give a smooth pathway to gold sulfide formation at higher temperatures. More importantly, the gold-disulfide complexes allow a unified picture of the gold-sulfur surface chemistry at high coverage for thiols and adsorbed sulfur species where the surface chemistry remains under discussion.

Polymorphism and metal-induced structural transformation in 5,5'-bis(4-pyridyl)(2,2'-bispyrimidine) adlayers on Au(111).

Metal-organic coordination networks self-assembled on surfaces have emerged as functional low-dimensional architectures with potential applications ranging from the fabrication of functional nanodevices to electrocatalysis. Among them, bis-pyridyl-bispyrimidine (PBP) and Fe-PBP on noble metal surfaces appear as interesting systems in revealing the details of the molecular self-assembly and the effect of metal incorporation on the organic network arrangement. Herein, we report a combined STM, XPS, and DFT study revealing polymorphism in bis-pyridyl-bispyrimidine adsorbed adlayers on the reconstructed Au(111) surface. The polymorphic structures are converted by the addition of Fe adatoms into one unique Fe-PBP surface structure. DFT calculations show that while all PBP phases exhibit a similar thermodynamic stability, metal incorporation selects the PBP structure that maximizes the number of metal-N close contacts. Charge transfer from the Fe adatoms to the Au substrate and N-Fe interactions stabilize the Fe-PBP adlayer. The increased thermodynamic stability of the metal-stabilized structure leads to its sole expression on the surface.

Highly Stabilized Nanoparticles on Poly-l-Lysine-Coated Oxidized Metals: A Versatile Platform with Enhanced Antimicrobial Activity.

The increasing incidence of infections in implantable devices has encouraged the search for biocompatible antimicrobial surfaces. To inhibit the bacterial adhesion and proliferation on biomaterials, several surface functionalization strategies have been developed. However, most of these strategies lead to bacteriostatic effect and only few of these are able to reach the bactericidal condition. In this work, bactericidal surfaces were designed through the functionalization of titanium surfaces with poly-l-lysine (PLL) as the mediator for the incorporation of antimicrobial silver nanoparticles (AgNPs). This functionalization influences the adsorption of the particles on the substrate impeding the agglomeration observed when bare titanium surfaces are used, leading to a homogeneous distribution of AgNPs on the surfaces. The antimicrobial activity of this surface has been tested against two different strains, namely, Staphylococcus aureus and Pseudomonas aeruginosa. For both strains and different AgNPs sizes, the surface modified with PLL and AgNPs shows a much enhanced antimicrobial activity in comparison with AgNPs deposited on bare titanium. This enhanced antibacterial activity is high enough to reach bactericidal effect, a condition hard to achieve in antimicrobial surfaces. Importantly, the designed surfaces are able to decrease the bacterial viability more than 5 orders with respect to the initial bacterial inoculum. That means that a relative low load of AgNPs on the PLL-modified titanium surfaces reaches 99.999% bacterial death after 24 h. The results of the present study are important to avoid infections in indwelling materials by reinforcing the preventive antibiotic therapy usually dosed throughout the surgical procedure and during the postoperative period.

Surface Structure of 4-Mercaptopyridine on Au(111): A New Dense Phase.

4-Mercaptopyridine (4MPy) self-assembled on Au(111) has been studied by in situ electrochemical scanning tunneling microscopy (EC-STM) in HClO4, cyclic voltammetry, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). Samples prepared by varying the immersion time at constant concentration named short time (30 s) and long time (3 min) adsorption have been studied. Cyclic voltammetry and XPS showed that the chemistry of the adsorbed molecules does not depend on the adsorption time resulting in a well established chemisorbed thiol self-assembled monolayer on Au(111). EC-STM study of the short time adsorption sample revealed a new self-assembled structure after a cathodic desorption/readsorption sweep, which remains stable only if the potential is kept negative to the Au(111) zero charge potential (EPZC). DFT calculations have shown a correlation between the observed structure and a dense weakly adsorbed phase with a surface coverage of θ = 0.4 and a (5 × âˆš3) lattice configuration. At potentials positive to the EPZC, the weakly adsorbed state becomes unstable, and a different structure is formed due to the chemisorption driven by the electrostatic interaction. Long time adsorption experiments, on the other hand, have shown the typical (5 × âˆš3) structure with θ = 0.2 surface coverage (chemisorbed phase) and are stable over the whole potential range. The difference observed in long time and short time immersion can be explained by the optimization of molecular interactions during the self-assembly process.

The role of the crystalline face in the ordering of 6-mercaptopurine self-assembled monolayers on gold.

Well-ordered molecular films play an important role in nanotechnology, from device fabrication to surface patterning. Self-assembled monolayers (SAMs) of 6-mercaptopurine (6MP) on the Au(100)-(1 × 1) and Au(111)-(1 × 1) have been used to understand the interplay of molecule-substrate interactions for heterocyclic thiols capable of binding to the surface by two anchors, which spontaneously form a highly disordered film on Au(111). Our results reveal that for the same surface coverage the simple change of the substrate from Au(111)-(1 × 1) to Au(100)-(1 × 1) eliminates molecular disorder and yields well-ordered SAMs. We discuss these findings in terms of differences in the surface mobility of 6MP species on these surfaces, the energetics of the adsorption sites, and the number of degrees of freedom of these substrates for a molecule with reduced surface mobility resulting from its two surface anchors. These results reveal the presence of subtle molecule-substrate interactions involving the heteroatom that drastically alter SAM properties and therefore strongly impact on our ability to control physical properties and to build devices at the nanoscale.

Optical Nanoparticle Sorting Elucidates Synthesis of Plasmonic Nanotriangles.

We investigate the optical and morphological properties of gold nanoparticles grown by reducing a gold salt with Na2S. Lasers are tuned to the observed plasmon resonances, and the optical forces exerted on the nanoparticles are used to selectively print individual nanoparticles onto a substrate. This enables us to combine dark-field spectroscopy and scanning electron microscopy to compare the optical properties of single nanoparticles with their morphology. By arresting the synthesis at different times, we are able to investigate which type of nanoparticle is responsible for the respective resonances. We find that thin Au nanotriangles are the source of the observed near infrared (NIR) resonance. The initial lateral growth of these triangles causes the plasmon resonance to redshift into the NIR, whereas a subsequent thickening of the triangles and a concomitant truncation lead to a blueshift of the resonance. Furthermore, we find that the nanotriangles produced have extremely narrow line widths (187 ± 23 meV), show nearly isotropic scattering, and are stable for long periods of time. This shows their vast potential for applications such as in vivo imaging and bio(chemical) sensing. The method used here is generally applicable to other syntheses, and shows how complex nanostructures can be built up on substrates by selectively printing NPs of varying plasmonic resonances.

Functional nicotinic acetylcholine receptor reconstitution in Au(111)-supported thiolipid monolayers.

The insertion and function of the muscle-type nicotinic acetylcholine receptor (nAChR) in Au(111)-supported thiolipid self-assembled monolayers have been studied by atomic force microscopy (AFM), surface plasmon resonance (SPR), and electrochemical techniques. It was possible for the first time to resolve the supramolecular arrangement of the protein spontaneously inserted in a thiolipid monolayer in an aqueous solution. Geometric supramolecular arrays of nAChRs were observed, most commonly in a triangular form compatible with three nAChR dimers of ∼20 nm each. Addition of the full agonist carbamoylcholine activated and opened the nAChR ion channel, as revealed by the increase in capacitance relative to that of the nAChR-thiolipid system under basal conditions. Thus, the self-assembled system appears to be a viable biomimetic model to measure ionic conductance mediated by ion-gated ion channels under different experimental conditions, with potential applications in biotechnology and pharmacology.

Self-assembly of flagellin on Au(111) surfaces.

The adsorption of flagellin monomers from Pseudomonas fluorescens on Au(111) has been studied by Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM), X-ray Photoelectron Spectroscopy (XPS), Surface Plasmon Resonance (SPR), and electrochemical techniques. Results show that flagellin monomers spontaneously self-assemble forming a monolayer thick protein film bounded to the Au surface by the more hydrophobic subunit and exposed to the environment the hydrophilic subunit. The films are conductive and allow allocation of electrochemically active cytochrome C. The self-assembled films could be used as biological platforms to build 3D complex molecular structures on planar metal surfaces and to functionalize metal nanoparticles.

Synergy between graphene and Au nanoparticles (heterojunction) towards quenching, improving Raman signal, and UV light sensing.

Here, we developed a simple method for obtaining a heterojunction composed of graphene (G) and surfactant-coated Au nanoparticles (NPs) to measure film conductivity and surface enhanced Raman scattering (SERS). Monolayer G is obtained by chemical vapor deposition (CVD) and transferred via poly(methyl methacrylate) (PMMA) to microfabricated Au electrodes, glass, and silicon. Post-synthesis treatments of G with PMMA and ozone (O3) showed 1 and 6 orders of magnitude decrease in film conductivity, respectively. The heterojunction formation with Au NPs had no major effect on G conductivity. In this work is demonstrated that G quenches more than 90% of the combined photoluminescence and fluorescence of Au NPs and Rhodamine B (RhB), respectively. Signal quenching permitted quantitative analysis of SERS of RhB on various substrates including as-transferred graphene, oxidized graphene (OG), and the heterojunction. While G is mainly responsible for quenching photoluminescence and fluorescence, ∼3 orders of magnitude increase SERS activity for RhB was accomplished by the heterojunction. Finally, we wanted to correlate changes in film current during UV light sensing experiments. We found striking differences in the sensing profiles at different UV energies.

Surface chemistry of thiomalic acid adsorption on planar gold and gold nanoparticles.

The self-assembly of thiomalic acid (TMA) on Au(111) and on preformed Au nanoparticles (AuNPs) protected by weak ligands has been studied by X-ray photoelectron spectroscopy (XPS) and electrochemical techniques. Results show that TMA is adsorbed on the Au(111) surface as thiolate species with a small amount of atomic sulfur (∼10%) and a surface coverage lower than that found for alkanethiols due to steric factors. The amount of atomic sulfur markedly increases when the TMA is adsorbed on AuNPs by the ligand exchange method. We propose that the atomic sulfur is produced as a consequence of C-S bond cleavage, a process that is more favorable at defective sites of the AuNPs surface. The bond scission is also assisted by the presence of the electron-withdrawing carboxy moiety in the α-position relative to the C-S bond. Moreover, the high local concentration of positively charged species increases the stability of the negatively charged leaving group, leading to a higher amount of coadsorbed atomic sulfur. Our results demonstrate that the terminal functionalities of thiols are conditioning factors in the final structure and composition of the adlayers.

Surface-diffusion-driven decay of high-aspect-ratio gratings: existence of morphologically related classes.

We present numerical and theoretical results concerning the technologically important process of evolution of high-aspect-ratio profiles due to surface diffusion under thermal treatment. We show how a broad class of initial gratings adopt, after a short transient stage, a typical shape that can be accurately described as a curve whose curvature has only two single Fourier modes as a function of the arc-length parameter. Moreover, we introduce a set of evolution equations for the relevant parameters that accounts very accurately for both morphological and kinetic aspects of the transformation processes for these curves in a wide region in parameter space. Regarding the decay of rectangular gratings, our numerical results show the existence of geometrically related classes that asymptotically approach to the same trajectory in parameter space. Gratings belonging to the same class pass through the same sequence of morphologies before reaching the final equilibrium state.

New findings for the composition and structure of Ni nanoparticles protected with organomercaptan molecules.

Here we explore the synthesis of alkanethiol-coated Ni NPs following the one-phase reaction method by Brust et al. The reduction of NiCl2 with NaBH4 in the presence of dodecanethiol (C12SH) yields a complex product that is difficult to identify as illustrated in the figure of merit. We synthesized Ni(II) dodecanethiolate (C12S) (without the addition of NaBH4) for comparison and performed an exhaustive characterization with TEM, HR-TEM, AFM, MFM, XPS, XRD, UV-vis, magnetism, and FT-IR. It is found that the organic coating is not quite a well-organized self-assembled monolayer (SAM) surrounding the Ni cluster as previously reported. XPS and XRD data show slight differences between both syntheses; however, Ni(II) thiolate appears to be more stable than reduced Ni when exposed to ambient air, indicating the propensity of metallic Ni to oxidize. It has been shown that irradiating with TEM electrons over various metal thiolates leads to nanoparticle formation. We irradiated over Ni(II) thiolate and observed no evidence of NP formation whereas irradiating a reduced Ni sample exhibited an ~3.0 nm nanoparticle diameter. Magnetism studies showed a difference between both samples, indicating ferromagnetic character for the reduced Ni sample. According to our results, the product of the synthesis is comprised of ultrasmall metallic clusters embedded in some form of Ni(II) C12S. In this work, we open a discussion of the chemical nature of the core and the shell in the synthesis of Ni NPs protected with organomercaptan molecules.

Citrate-capped silver nanoparticles showing good bactericidal effect against both planktonic and sessile bacteria and a low cytotoxicity to osteoblastic cells.

A common problem with implants is that bacteria can form biofilms on their surfaces, which can lead to infection and, eventually, to implant rejection. An interesting strategy to inhibit bacterial colonization is the immobilization of silver (Ag) species on the surface of the devices. The aim of this paper is to investigate the action of citrate-capped silver nanoparticles (AgNPs) on clinically relevant Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria in two different situations: (i) dispersed AgNPs (to assess the effect of AgNPs against planktonic bacteria) and (ii) adsorbed AgNPs on titanium (Ti) substrates, a material widely used for implants (to test their effect against sessile bacteria). In both cases, the number of surviving cells was quantified. The small amount of Ag on the surface of Ti has an antimicrobial effect similar to that of pure Ag surfaces. We have also investigated the capability of AgNPs to kill planktonic bacteria and their cytotoxic effect on UMR-106 osteoblastic cells. The minimum bactericidal concentration found for both strains is much lower than the AgNP concentration that leads to cytotoxicity to osteoblasts. Planktonic P. aeruginosa show a higher susceptibility to Ag than S. aureus, which can be caused by the different wall structures, while for sessile bacteria, similar results are obtained for both strains. This can be explained by the presence of extracellular polymeric substances in the early stages of P. aeruginosa biofilm formation. Our findings can be important to improving the performance of Ti-based implants because a good bactericidal action is obtained with very small quantities of Ag, which are not detrimental to the cells involved in the osseointegration process.

Strong correlation between molecular configurations and charge-transfer processes probed at the single-molecule level by surface-enhanced Raman scattering.

Single-molecule (SM) electrochemistry studied by surface-enhanced Raman scattering (SERS) with high spectral resolution reveals a picture in which the frequency of Raman modes is correlated with the electrochemical process through the interaction with the surface. Previously unexplored phenomena can be revealed by the synergy of electrochemistry and SM-SERS, which explores in this case subtler spectroscopic aspects (like the frequency of a vibration within the inhomogeneous broadening of a many-molecules Raman peak) to gain the information. We demonstrate, among other things, that the interaction with the surface is correlated both with the molecule vibrational frequencies and with the ability of single molecules to be reduced/oxidized at different potentials along the electrochemical cycle. Qualitative models of the interaction of molecules with surfaces are also touched upon.

Sulfidization of Au(111) from thioacetic acid: an experimental and theoretical study.

We have studied the adsorption of thioacetic acid (TAAH) on Au(111) from solution deposition. The close proximity of the SH groups to CO groups makes this molecule very attractive for exploring the effect of the functional group on the stability of the S-C and S-Au bonds. Although thioacetic acid was supposed to decompose slowly in water by hydrolysis supplying hydrogen sulfide, this behavior is not expected in nonpolar solvents such as toluene or hexane. Therefore, we have used these solvents for TAAH self-assembly on the Au(111) surface. The characterization of the adsorbates has been done by electrochemical techniques, X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM). We have found that even in nonpolar solvents thioacetic acid decomposes to S. The results have been discussed on the basis that the adsorbed species suffer a cleavage on the Au surface, leaving the S attached to it. The dissociation is a spontaneous process that reaches the final state very fast once it is energetically favorable, as can be interpreted from DFT calculations. The thioacetic acid adsorption reveals the strong effect that produces a functional group and the key role of the S-H bond cleavage in the self-assembly process.

New insight into the electrochemical desorption of alkanethiol SAMs on gold.

A combination of Polarization Modulation Infrared Reflection Absorption Spectroscopy (PMIRRAS) under electrochemical control, Electrochemical Scanning Tunneling Microscopy (ECSTM) and Molecular Dynamics (MD) simulations has been used to shed light on the reductive desorption process of dodecanethiol (C12) and octadecanethiol (C18) SAMs on gold in aqueous electrolytes. Experimental PMIRRAS, ECSTM and MD simulations data for C12 desorption are consistent with formation of randomly distributed micellar aggregates stabilized by Na(+) ions, coexisting with a lying-down phase of molecules. The analysis of pit and Au island coverage before and after desorption is consistent with the thiolate-Au adatoms models. On the other hand, PMIRRAS and MD data for C18 indicate that the desorbed alkanethiolates adopt a Na(+) ion-stabilized bilayer of interdigitated alkanethiolates, with no evidence of lying down molecules. MD simulations also show that both the degree of order and tilt angle of the desorbed alkanethiolates change with the surface charge on the metal, going from bilayers to micelles. These results demonstrate the complexity of the alkanethiol desorption in the presence of water and the fact that chain length and counterions play a key role in a complex structure.

Improved vapor selectivity and stability of localized surface plasmon resonance with a surfactant-coated Au nanoparticles film.

Here, we report the use of tetraoctylammonium bromide (TOABr)-coated Au nanoparticles (NPs) for the optical sensing of volatile organic compounds (VOCs). We find that the film responded selectively to the presence of polar and nonpolar vapors by changes in the maximum wavelength (λ(max)) toward higher and lower wavelengths, respectively, as determined by UV-visible spectroscopy. We also observed that the organic coating reorganizes when vapors partition into the film indicated by FT-IR and the film contracts in the presence of water indicated by scanning electron microscopy (SEM). In the present sensor, the metallic Au core serves as the plasmonic signal while the organic coating acts as the receptor material providing vapor selectivity and sensor stability. Correlating changes in (λ(max)) with changes in the refractive index (RI) and nanoparticle-to-nanoparticle separation in the film is important both fundamentally and for improving selectivity in localized surface plasmon resonance (LSPR) sensors.

The chemistry of the sulfur-gold interface: in search of a unified model.

Over the last three decades, self-assembled molecular films on solid surfaces have attracted widespread interest as an intellectual and technological challenge to chemists, physicists, materials scientists, and biologists. A variety of technological applications of nanotechnology rely on the possibility of controlling topological, chemical, and functional features at the molecular level. Self-assembled monolayers (SAMs) composed of chemisorbed species represent fundamental building blocks for creating complex structures by a bottom-up approach. These materials take advantage of the flexibility of organic and supramolecular chemistry to generate synthetic surfaces with well-defined chemical and physical properties. These films already serve as structural or functional parts of sensors, biosensors, drug-delivery systems, molecular electronic devices, protecting capping for nanostructures, and coatings for corrosion protection and tribological applications. Thiol SAMs on gold are the most popular molecular films because the resulting oxide-free, clean, flat surfaces can be easily modified both in the gas phase and in liquid media under ambient conditions. In particular, researchers have extensively studied SAMs on Au(111) because they serve as model systems to understand the basic aspects of the self-assembly of organic molecules on well-defined metal surfaces. Also, great interest has arisen in the surface structure of thiol-capped gold nanoparticles (AuNPs) because of simple synthesis methods that produce highly monodisperse particles with controllable size and a high surface/volume ratio. These features make AuNPs very attractive for technological applications in fields ranging from medicine to heterogeneous catalysis. In many applications, the structure and chemistry of the sulfur-gold interface become crucial since they control the system properties. Therefore, many researchers have focused on understanding of the nature of this interface on both planar and nanoparticle thiol-covered surfaces. However, despite the considerable theoretical and experimental efforts made using various sophisticated techniques, the structure and chemical composition of the sulfur-gold interface at the atomic level remains elusive. In particular, the search for a unified model of the chemistry of the S-Au interface illustrates the difficulty of determining the surface chemistry at the nanoscale. This Account provides a state-of-the-art analysis of this problem and raises some questions that deserve further investigation.

One-dimensional gratings evolving through high-temperature annealing: sine-generated solutions.

Sine-generated curves (i.e. curves in which the curvature is a sine function of the arc-length parameter) have been used in the past to describe river meanders. Here we show how these curves spontaneously appear during the decay of high-aspect-ratio surfaces mediated by surface diffusion. We obtained analytical results for the kinetic evolution of such processes relevant to a wide class of initial geometries. Our theoretical results were satisfactorily compared with numerical simulations and with results from previous approaches to the same problem, and they can be useful for interpreting and designing experiments related to the technologically important process of high-temperature annealing on nano/micro-structured samples.