RESUMO
Eggs in the United States are typically washed using chemical sanitizers such as quaternary ammonia (QA) or chlorine. Such treatments generate wash water, which could be potentially hazardous to the environment. A novel, nonthermal sanitization technique for washing shell eggs using cold plasma-activated water (PAW) was investigated in this study. The inactivation efficacy of PAW on Klebsiella michiganensis and the impact of PAW on the cuticle of the eggshell and shell strength were tested in comparison to QA. Washing inoculated eggs with PAW and QA achieved a similar microbial reduction (>5.28 log CFU/egg). Colorimetric analysis showed that ∆E-value for PAW-treated eggs was significantly lower than QA-treated eggs, suggesting higher cuticle coverage in eggs treated with PAW. The texture analysis to test for shell egg strength indicated that washing eggs with PAW did not affect the structural integrity of the eggshell when compared to eggs washed with QA. According to this study, PAW has the potential as an alternative to commercial sanitizers like QA in the egg-washing industry. PAW does not detrimentally impact shell strength or cuticle coverage and provides similar microbial reduction efficacy.
Assuntos
Microbiologia de Alimentos , Gases em Plasma , Animais , Gases em Plasma/farmacologia , Gases em Plasma/análise , Água/análise , Galinhas , Óvulo , Casca de Ovo/química , Contagem de Colônia Microbiana/veterinária , OvosRESUMO
Plasma-activated water (PAW) is considered a novel sanitizer for the food industry due to the antimicrobial mechanisms exhibited by reactive oxygen and nitrogen species. The plasma operation parameters can affect the chemistry of PAW and can therefore influence its microbial inactivation efficacy. This study statistically optimized the operating conditions of PAW (activation time, distance from nozzle, and volume of water) using response surface methodology. Two optimized conditions of PAW were identified for the inactivation of planktonic cells of the avirulent strain of Salmonella Typhimurium MHM112 providing a minimum reduction of 6.3 log. All three operating parameters significantly affected the physicochemical characteristics (pH, ORP, EC, nitrite, and nitrate) and microbial inactivation efficacy of PAW. Mixing of small batches using the two optimized conditions to obtain larger volumes did not significantly change the microbial inactivation. However, there were significant reductions in nitrite and nitrate concentrations in PAW due to the mixing of batches while the pH and ORP values remained unaffected. The storage of large volumes of PAW for 25 min at 40-46°C, which is the commercial egg washing temperature in the United States, did not significantly impact S. Typhimurium MHM112 inactivation or the physicochemical characteristics of PAW. A validation study using a cocktail of six pathogenic strains of Salmonella revealed no significant differences in inactivation between the avirulent S. Typhimurium MHM112 and the pathogenic strains, suggesting that the avirulent S. Typhimurium MHM112 may serve as a surrogate for sanitation of S. enterica at the optimized conditions of PAW. The results obtained from this study are useful for our long-term goal of evaluating PAW efficacy in surface egg washing to inactivate Salmonella.
Assuntos
Gases em Plasma , Salmonella , Viabilidade Microbiana , Nitratos , Indústria AlimentíciaRESUMO
This work investigates the efficacy of plasma-activated water (PAW) and plasma-activated acidified buffer (PAAB) on Enterobacter aerogenes in aqueous system and fruit systems. Reactive oxygen and nitrogen species in PAW have been suggested to provide antimicrobial and acidifying effects, causing the pH of treated water to drop. To isolate the effect of pH in microbial inactivation and to study the interactive effects of pH and reactive species on microbial inactivation, a citrate-phosphate buffer (pH 3.1) and PAAB (citrate-phosphate) were studied. A 1.92 ± 0.70 log CFU/mL reduction in E. aerogenes was observed in PAW, while no reduction was achieved in the buffer, suggesting that the inactivation was due to the reactive species in PAW and not the acidic pH. PAAB achieved a 5.11 ± 0.63 log CFU/mL reduction, suggesting an interactive effect of reactive species and low pH. Electrical conductivity and oxidation-reduction potential measurements suggest potential mechanisms for the greater antimicrobial efficacy of PAAB over PAW. Four surfaces of increasing roughness (glass slides, grape tomatoes, limes, and spiny gourds) were spot inoculated and washed with distilled water, PAW, buffer, and PAAB for 3 min. The smoothest surface (glass) showed the highest reduction (6.32 ± 0.43 log CFU per surface), while the roughest surface (spiny gourd) showed a significantly lower reduction (2.52 ± 0.46 log CFU per surface) when treated with PAAB. For treatment with PAW, no significant differences were observed between glass slides, limes, and spiny gourds. With PAW treatment, significantly lower reduction was observed on spiny gourds (1.70 ± 0.21 log CFU per surface) than on grape tomatoes (4.65 ± 1.34 log CFU per surface). PAW and PAAB both showed potential for their use in fresh produce sanitation.
Assuntos
Enterobacter aerogenes/efeitos dos fármacos , Microbiologia de Alimentos , Água , Contagem de Colônia Microbiana , Enterobacter aerogenes/crescimento & desenvolvimento , Frutas/microbiologia , Concentração de Íons de Hidrogênio , Viabilidade Microbiana , Gases em Plasma , Água/química , Água/farmacologiaRESUMO
This study investigates the efficacy of cold atmospheric pressure plasma (CAPP) on microbial inactivation as influenced by surface roughness of two types of surfaces: sandpaper and fresh fruit peel. Different grits of closed-coat sandpaper were selected, with their roughness (Pq) values ranging from 6 to 16 µm. Apple, orange, and cantaloupe peels were selected for roughness values that were similar to the sandpapers. The sandpapers and the fruit peel surfaces were spot inoculated with Enterobacter aerogenes (109 CFU/63.64 cm2) and exposed to CAPP for 492 s. Similar microbial enumeration techniques were used for both systems to quantify the microbial inactivation. The smoothest sandpaper showed a 0.52-log higher inactivation of E. aerogenes (2.08 log CFU/63.64 cm2 sandpaper surface inactivation) than did the roughest sandpaper (1.56 log CFU/63.64 cm2 sandpaper surface inactivation), and the difference was statistically significant (P < 0.05). The smoothest fresh fruit peel surface (apple) showed a 1.25-log higher inactivation of the microorganism (1.86 log CFU/63.64 cm2 fruit peel surface inactivation) than did the roughest fresh fruit peel surface (cantaloupe; 0.61 log CFU/63.64 cm2 fruit peel surface inactivation), and the difference was statistically significant (P < 0.05). As the surface roughness increased, microbial inactivation efficacy of CAPP decreased for both systems. The results from sandpaper show that, in a scenario in which the surface roughness was the only parameter of difference, the microbial inactivation efficacy of CAPP decreased with increasing surface roughness. The results from fruit surfaces show high variability and were not directly predictable from the sandpaper data. This suggests that the microbial inactivation efficacy of CAPP in real-world food systems, such as on fresh fruit peels, is affected by factors in addition to surface roughness.
Assuntos
Manipulação de Alimentos/métodos , Microbiologia de Alimentos , Viabilidade Microbiana , Pressão Atmosférica , Contagem de Colônia Microbiana , Frutas/microbiologia , Gases em PlasmaRESUMO
Numerically simulated heat transfer model of frozen US military rations was combined with microbial kinetics to predict the microbial spoilage of the food products, during two possible temperature abuse scenarios. An army breakfast menu box containing five different food items was selected for conducting this research. One of the food item in the menu box, beefsteak, was chosen for detailed microbial study. A microbial predictive tool was used to identify and evaluate the kinetics of the most prone microorganism that can grow in a beefsteak. Numerical predictions suggested that the food items exposed to external temperatures ranging from 20°C to 40°C can be allowed to stay at those temperatures for maximum times of 28.7h to 11.9h, respectively. The food items can be allowed to stay inside the broken freezer for a maximum time of 186h, to ensure microbial safety in the case of freezer failure.
RESUMO
Numerical simulation was carried out to predict the effect of external temperature conditions on thermal behavior of frozen US military rations, during storage and transportation. An army breakfast menu box containing beefsteaks, concentrated orange juice, peppers & onions, French toast, and Danishes, was selected for conducting this study. Thermo-physical properties of each food item were characterized using their composition and differential scanning calorimeter (DSC). Apparent heat capacity method was used to account for the latent heat of phase change during simulation of thawing and freezing. Numerically simulated results were experimentally validated using a gel-based model food system and the food items in the menu box. The average deviation between numerically predicted temperature and experimentally measured temperature for the model food system was approximately 1°C and for the targeted food items the deviation ranged from 2°C to 5°C, depending on the food item.
RESUMO
A new pretreatment technology using dilute ammonium hydroxide was evaluated for ethanol production on sorghum. Sorghum fibers, ammonia, and water at a ratio of 1:0.14:8 were heated to 160 degrees C and held for 1 h under 140-160 psi pressure. Approximately, 44% lignin and 35% hemicellulose were removed during the process. Hydrolysis of untreated and dilute ammonia pretreated fibers was carried out at 10% dry solids at an enzyme concentration of 60 FPU Spezyme CP and 64 CBU Novozyme 188/g glucan. Cellulose digestibility was higher (84%) for ammonia pretreated sorghum as compared to untreated sorghum (38%). Fermentations with Saccharomyces cerevisiae D(5)A resulted in 24 g ethanol /100 g dry biomass for dilute ammonia pretreated sorghum and 9 g ethanol /100 g dry biomass for untreated sorghum.
Assuntos
Amônia/química , Etanol/química , Fermentação , Sorghum , Biomassa , Reatores Biológicos , Furaldeído/química , Hidrólise , Lignina/metabolismo , Saccharomyces cerevisiae/metabolismo , Sorghum/química , Sorghum/metabolismoRESUMO
A continuous microwave heating system was tested for its effectiveness at removing potentially invasive organisms during deballasting operations. Four different organisms, namely Nannochloropsis oculata (microalgae), Artemia nauplii, Artemia adults and Crassosstrea virginica (oyster larvae) normally found in ballast water were investigated in a controlled study to quantify their survival after continuous microwave heating of synthetic ballast water. The experiments were performed in the microwave system using a 2 x 2 factorial design with power (2.5 and 4.5 kW) and flow rate (1.0 and 2.0 lpm) and the organisms subsequently subjected to different holding times. The control treatment was performed in a water bath using the same temperatures and holding times as in the case of the microwave treatment. Overall, the results obtained indicated that the microwave system was more effective in eliminating the organisms when compared with the control treatment. In most cases there were no survivors present after the microwave treatment at holding times above 100 s, and temperatures as low as 50 degrees C particularly for oyster larvae and Artemia adults. The results are promising, indicating that this technology has the potential to be an effective tool in controlling/preventing the introduction of invasive species into native environments.
Assuntos
Artemia/efeitos da radiação , Eucariotos/efeitos da radiação , Micro-Ondas , Ostreidae/efeitos da radiação , Água do Mar , Purificação da Água/métodos , Animais , Conservação dos Recursos Naturais , Larva/efeitos da radiação , TemperaturaRESUMO
The goal of this study was to numerically predict the temperature of a liquid product heated in a continuous-flow focused microwave system by coupling high frequency electromagnetism, heat transfer, and fluid flow in ANSYS Multiphysics. The developed model was used to determine the temperature change in water processed in a 915 MHz microwave unit, under steady-state conditions. The influence of the flow rates on the temperature distribution in the liquid was assessed. Results showed that the average temperature of water increased from 25 degrees C to 34 degrees C at 2 l/min, and to 42 degrees C at 1 l/min. The highest temperature regions were found in the liquid near the center of the tube, followed by progressively lower temperature regions as the radial distance from the center increased, and finally followed by a slightly higher temperature region near the tube's wall corresponding to the energy distribution given by the Mathieu function. The energy distribution resulted in a similar temperature pattern, with the highest temperatures close to the center of the tube and lower at the walls. The presented ANSYS Multiphysics model can be easily improved to account for complex boundary conditions, phase change, temperature dependent properties, and non-Newtonian flows, which makes for an objective of future studies.