Organic, conventional and sustainable palm oil (RSPO): Formation of 2- and 3-MCPD esters and glycidyl esters and influence of aqueous washing on their reduction.

Palm oil is a type of vegetable oil which presents a variety of applications including food, energy, and international trading. However, one of the major concerns associated with palm oil uses as a food ingredient is the significant amount of processing contaminants, such as monochloropropanediol esters (MCPDE) and glycidyl esters (GE) which are formed during the refining process. These contaminants may pose a health risk to consumers due to their carcinogenicity. Thus, mitigation strategies have been studied to reduce these substances in palm oil. In this study, we investigated the effect of the application of an aqueous washing step, as a mitigation strategy, prior to deodorization in three different palm oil cultivation systems: organic, conventional and certified palm oil by the Roundtable on Sustainable Palm Oil (RSPO). In addition, we evaluated the quality parameters after the application of the washing step. For the organic, conventional and RSPO palm oil samples, the aqueous washing step reduced approximately 41%, 34% and 36% of the 3-MCPDE, respectively. The levels of 2-MCPDE for the organic, conventional and RSPO palm oil presented a reduction of 55%, 41% and 32%, respectively. The GE levels are considerably low for all the deodorized palm oils, and presented no statistically significant difference (p > 0.05). Besides, the quality parameters such as free fatty acids, color, and OSI met the recommended limits. Therefore, the aqueous washing could be used as a supplementary strategy to reduce these contaminants from palm oil.

Physicochemical and thermal characterization of babassu oils (Orbignya phalerata Mart.) obtained by different extraction methods.

Babassu oil is a raw material widely used in the pharmaceutical and biofuels industry. However, its physical-chemical and thermal characteristics are not widely described in the literature. This article describes these characteristics and, thus, seeks to increase the application of this raw material in the food industry. In this work, two different types of babassu oils, extra-virgin and virgin, were studied. The physicochemical characteristics, lipid profile, composition of the triacylglycerol and thermal properties of both oils were determined. Moreover, the crystallization and melting behavior was determined and the FTIR-ATR spectra of the oils acquired. The results show that the main fatty acids present are medium-chain and the type of extraction modifies the amounts of fatty acids present in each type of oil. Despite this, its physical-chemical characteristics and thermal properties are the same, except color and thermal stability, where extra-virgin oil is lighter and more stable than virgin babassu oil.

Portable NIR Spectrometer for Prediction of Palm Oil Acidity.

Palm oil is widely used in the food industry, and its quality is associated with the free fatty acids (FFA) content. Determination of FFA in oil is time-consuming, requires chemicals and generates residues. There is a trend of applying process analytical technologies (PAT) for fast and nondestructive determination of oil parameters. Portable near-infrared (NIR) spectrometers are cheaper than bench top equipment, and have been used for several tasks in the food processing industry, as it provides fast and reliable data for inline measurements. This study investigated the use of NIR spectra using a portable equipment, combined with both unsupervised and supervised multivariate analyses for identification of palm oil samples with different levels of FFA. Soft independent modeling of class analogy , k-Nearest Neighbors, and linear discriminant analysis models were able to correctly identify 100% of the studied samples with selected wavelengths from NIR spectra. Calibration models were performed for acidity prediction, achieving R2 = 0.97, with root mean square error of prediction = 4.37 for partial least squares model using most relevant wavelengths. These results demonstrate the feasibility of applying a low-cost portable NIR spectrophotometer to predict quality parameters of palm oil. PRACTICAL APPLICATION: This work presents results that show the feasibility of using a low-cost portable near-infrared spectrophotometer for the classification of raw palm oil samples according to free fatty acids contents. Regression models are presented as a fast and nondestructive alternative to classify samples for acidity, which is an important quality parameter and that directly affects the market value of crude palm oil.

Washing bleached palm oil to reduce monochloropropanediols and glycidyl esters.

The formation of toxic compounds, potentially carcinogenic, during food processing has been considered an important food safety issue. Among them, particular attention has been given to 3-monochloropropane-1,2-diol esters (3-MCPDE), 2-monochloropropane-1,3-diol esters (2-MCPDE) and glycidyl esters (GE), which can be formed during vegetable oil refining, especially palm oil. These substances may pose a health risk to humans due to their toxicity and carcinogenicity. The aim of this study was to investigate the effect of washing bleached palm oil (BPO) with different solvents, and evaluate the reduction of 3-MCPDE, 2-MCPDE and GE as well as assess the quality parameters of the final product. For this purpose, we used two types of washing with different solvents. A single washing was carried out in one step and a double washing in two steps using a solvent gradient. Single washing had a limited reduction in the levels of 3-MCPDE and 2-MCPDE and resulted in an increased level of GE, whereas double washing slightly reduced 3-MCPDE and 2-MCPDE and resulted in a significant reduction of GE levels. The reduction achieved in this study was up to 17.1% for 3-MCPDE, 56.4% for 2-MCPDE and 76.9% for GE levels. The reduction of 3-MCPDE and 2-MCPDE might be due to the removal of part of the ethanol-soluble chlorinated precursors from the oil which suggests that highly lipophilic forms of these substances are present in BPO. The substantial reduction on GE levels might be associated with the removal of the precursors present in the oil such as diacylglycerols. Thus, the washing treatment could be used as a supplementary strategy to reduce processing contaminants from palm oil, especially GEs.

Physical properties of Amazonian fats and oils and their blends.

Considering their diversity, this work evaluated physical properties of Amazonian fats/oils (murumuru, tucuma kernel, bacuri, pracaxi, patawa, and Brazil nut). Solid fat content (SFC) curves and crystallization/melting profiles were determined. We also explored the possibilities of combining these lipids into blends to improve their nutritional and technological aspects. Patawa, pracaxi, and Brazil nut oils presented high levels of mono- and polyunsaturated fatty acids, displaying low atherogenicity and thrombogenicity indexes (0.10 and 0.18; 0.23 and 0.70; 0.20 and 0.42), respectively. The SFC curves showed that murumuru fat could be used as a cocoa butter replacer, whereas bacuri fat was found to be a promising alternative to hydrogenated oils in shortenings and spreads formulations. The blends expanded fats' melting ranges and enriched their fatty acid compositions from a nutritional standpoint. This work shows that these fats, oils and their blends may be suitable for developing new products in the food industry.