On the photostability of scytonemin, analogues thereof and their monomeric counterparts.

As a part of their sun-protective strategy, cyanobacteria produce the natural UV-screener scytonemin. Its accumulation in the extracellular sheaths allows the bacteria to thrive in inhospitable locations highly exposed to solar radiation. Scytonemin is often referred to as photostable and has been reported to be non-fluorescent. Taken together, these properties indicate inherently fast non-radiative relaxation processes. Despite these interesting traits, the photophysics of scytonemin is as yet almost completely unexplored. In this study, we have compared the steady-state photophysics of scytonemin itself and four derivatives thereof. Furthermore, the in vitro photostability of scytonemin was studied in different solvents using a solar simulation system. Scytonemin and the investigated derivatives demonstrated a more rapid photoinduced decay in comparison with two commercial UV-screening agents. The photostability could be modulated by varying the solvent, with the protic solvent ethanol providing the most stabilizing environment.

Exploring a cascade Heck-Suzuki reaction based route to kinase inhibitors using design of experiments.

Design of Experiments (DoE) has been used to optimize a diversity oriented palladium catalyzed cascade Heck-Suzuki reaction for the construction of 3-alkenyl substituted cyclopenta[b]indole compounds. The obtained DoE model revealed a reaction highly dependent on the ligand. Guided by the model, an optimal ligand was chosen that selectively delivered the desired products in high yields. The conditions were applicable with a variety of boronic acids and were used to synthesize a library of 3-alkenyl derivatized compounds. Focusing on inhibition of kinases relevant for combating melanoma, the library was used in an initial structure-activity survey. In line with the observed kinase inhibition, cellular studies revealed one of the more promising derivatives to inhibit cell proliferation via an apoptotic mechanism.

The biomolecular corona is retained during nanoparticle uptake and protects the cells from the damage induced by cationic nanoparticles until degraded in the lysosomes.

Nanoparticles have unique capacities of interacting with the cellular machinery and entering cells. To be able to exploit this potential, it is essential to understand what controls the interactions at the interface between nanoparticles and cells: it is now established that nanoparticles in biological media are covered by proteins and other biomolecules forming a "corona" on the nanoparticle surface, which confers a new identity to the nanoparticles. By labelling the proteins of the serum, using positively-charged polystyrene, we now show that this adsorbed layer is strong enough to be retained on the nanoparticles as they enter cells and is trafficked to the lysosomes on the nanoparticles. There, the corona is degraded and this is followed by lysosomal damage, leading to cytosolic release of lysosomal content, and ultimately apoptosis. Thus the corona protects the cells from the damage induced by the bare nanoparticle surface until enzymatically cleared in the lysosomes. FROM THE CLINICAL EDITOR: This study investigates the effects of protein corona that normally forms on the surface of nanoparticles during in vivo use, describing the steps of intracellular processing of such particles, to enhance our understanding of how these particles interact with the cellular machinery.

High-speed imaging of Rab family small GTPases reveals rare events in nanoparticle trafficking in living cells.

Despite the increased application of nanomaterials in diagnostics and therapeutics, methods to study the interactions of nanoparticles with subcellular structures in living cells remain relatively undeveloped. Here we describe a robust and quantitative method that allows for the precise tracking of all cell-associated nanoparticles as they pass through endocytic compartments in a living cell. Using rapid multicolor 3D live cell confocal fluorescence microscopy, combined with transient overexpression of small GTPases marking various endocytic membranes, our studies reveal the kinetics of nanoparticle trafficking through early endosomes to late endosomes and lysosomes. We show that, following internalization, 40 nm polystyrene nanoparticles first pass through an early endosome intermediate decorated with Rab5, but that these nanoparticles rapidly transfer to late endosomes and ultimately lysosomes labeled with Rab9 and Rab7, respectively. Larger nanoparticles of 100 nm diameter also reach acidic Rab9- and Rab7-positive compartments although at a slower rate compared to the smaller 40 nm nanoparticles. Our work also reveals that relatively few nanoparticles are able to access endocytic recycling pathways, as judged by lack of significant colocalization with Rab11. Finally, we demonstrate that this quantitative approach is sufficiently sensitive to be able to detect rare events in nanoparticle trafficking, specifically the presence of nanoparticles in Rab1A-labeled structures, thereby revealing the wide range of intracellular interactions between nanoparticles and the intracellular environment.

Elution of labile fluorescent dye from nanoparticles during biological use.

Cells act as extremely efficient filters for elution of unbound fluorescent tags or impurities associated with nanoparticles, including those that cannot be removed by extensive cleaning. This has consequences for quantification of nanoparticle uptake and sub-cellular localization in vitro and in vivo as a result of the presence of significant amount of labile dye even following extensive cleaning by dialysis. Polyacrylamide gel electrophoresis (PAGE) can be used to monitor the elution of unbound fluorescent probes from nanoparticles, either commercially available or synthesized in-house, and to ensure their complete purification for biological studies, including cellular uptake and sub-cellular localisation. Very different fluorescence distribution within cells is observed after short dialysis times versus following extensive dialysis against a solvent in which the free dye is more soluble, due to the contribution from free dye. In the absence of an understanding of the presence of residual free dye in (most) labeled nanoparticle solutions, the total fluorescence intensity in cells following exposure to nanoparticle solutions could be mis-ascribed to the presence of nanoparticles through the cell, rather than correctly assigned to either a combination of free-dye and nanoparticle-bound dye, or even entirely to free dye depending on the exposure conditions (i.e. aggregation of the particles etc). Where all of the dye is nanoparticle-bound, the particles are highly localized in sub-cellular organelles, likely lysosomes, whereas in a system containing significant amounts of free dye, the fluorescence is distributed through the cell due to the free diffusion of the molecule dye across all cellular barriers and into the cytoplasm.

Highly efficient incorporation of the fluorescent nucleotide analogs tC and tCO by Klenow fragment.

Studies of the mechanisms by which DNA polymerases select the correct nucleotide frequently employ fluorescently labeled DNA to monitor conformational rearrangements of the polymerase-DNA complex in response to incoming nucleotides. For this purpose, fluorescent base analogs play an increasingly important role because they interfere less with the DNA-protein interaction than do tethered fluorophores. Here we report the incorporation of the 5'-triphosphates of two exceptionally bright cytosine analogs, 1,3-diaza-2-oxo-phenothiazine (tC) and its oxo-homolog, 1,3-diaza-2-oxo-phenoxazine (tC(O)), into DNA by the Klenow fragment. Both nucleotide analogs are polymerized with slightly higher efficiency opposite guanine than cytosine triphosphate and are shown to bind with nanomolar affinity to the DNA polymerase active site, according to fluorescence anisotropy measurements. Using this method, we perform competitive binding experiments and show that they can be used to determine the dissociation constant of any given natural or unnatural nucleotide. The results demonstrate that the active site of the Klenow fragment is flexible enough to tolerate base pairs that are size-expanded in the major groove. In addition, the possibility to enzymatically polymerize a fluorescent nucleotide with high efficiency complements the tool box of biophysical probes available to study DNA replication.

Nucleic acid structure and sequence probing using fluorescent base analogue tC(O).

The fluorescent cytosine analog tC(O) is on average the brightest probe of its kind and, moreover, it introduces minimal perturbations to the normal secondary structure of DNA. Here several ways of how tC(O), with an advantage, can be used as a local fluorescent probe in nucleic acid systems are presented. Most importantly, we show that tC(O) is an excellent probe for the detection of individual melting processes of complex nucleic acid structures containing a large number of separate secondary structure motifs. Since conventional UV-melting investigations merely monitor the global melting process of the whole nucleic acid structure, e.g. multi-hairpin systems in RNA/DNA, and thus is incapable of estimating individual melting transitions of such systems, tC(O) represents a new method of characterization. Furthermore, we find that tC(O) may be used to detect bulges and loops in nucleic acids as well as to distinguish a matched base-pair from several of the mismatched.

Self-assembled DNA photonic wire for long-range energy transfer.

DNA is a promising material for use in nanotechnology; the persistence length of double stranded DNA gives it a rigid structure in the several-nanometer regime, and its four letter alphabet enables addressability. We present the construction of a self-assembled DNA-based photonic wire capable of transporting excitation energy over a distance of more than 20 nm. The wire utilizes DNA as a scaffold for a chromophore with overlapping absorption and emission bands enabling fluorescence resonance energy transfer (FRET) between pairs of chromophores leading to sequential transfer of the excitation energy along the wire. This allows for the creation of a self-assembled photonic wire using straightforward construction and, in addition, allows for a large span in wire lengths without changing the basic components. The intercalating chromophore, YO, is chosen for its homotransfer capability enabling effective diffusive energy migration along the wire without loss in energy. In contrast to heterotransfer, i.e., multistep cascade FRET, where each step renders a photon with less energy than in the previous step, homotransfer preserves the energy in each step. By using injector and detector chromophores at opposite ends of the wire, directionality of the wire is achieved. The efficiency of the wire constructs is examined by steady-state and time-resolved fluorescence measurements and the energy transfer process is simulated using a Markov chain model. We show that it is possible to create two component DNA-based photonic wires capable of long-range energy transfer using a straightforward self-assembly approach.

Characterization and use of tricyclic fluorescent nucleic acid base analogues.

The two recently developed nucleic acid probe molecules tC and tC(O) both have unique properties compared to other molecules in the family of fluorescent base analogues.(1-5) These tricyclic base analogues both form very stable base pairs with guanine and give minimal perturbations to the native structure of DNA.(2) We have found that tC(O) is the brightest fluorescent base analogue reported(4) and that tC also is very bright and has a fluorescence quantum yield that is virtually insensitive to its surrounding microenvironment within the nucleic acid(3). These base analogues have so far been used in FRET-studies of a DNA-polymerase system(6) and in initial anisotropy-studies of DNA-containing systems(4).

Addressable molecular node assembly--high information density DNA nanostructures.

The inherent self-assembly properties of DNA make it ideal in nanotechnology. We present a fully addressable DNA nanostructure with the smallest possible unit cell, a hexagon with a side-length of only 3.4 nm.(2,3) Using novel three-way oligonucleotides, where each side has a unique double-stranded DNA sequence that can be assigned a specific address, we will build a non-repetitive two-dimensional grid.

Self-assembled DNA photonic wire.

DNA is a promising material for use in nanotechnology; the persistence length of double stranded DNA gives it a rigid structure in the several nanometer regime and its four letter alphabet enables addressability. We present the construction of a self-assembled DNA-based photonic wire capable of transporting excitation energy over a distance of more than 20 nm. Our results show that it is possible to create two component DNA-based photonic wires capable of long range energy transfer using a straightforward self-assembly approach.

Characterization and use of an unprecedentedly bright and structurally non-perturbing fluorescent DNA base analogue.

This article presents the first evidence that the DNA base analogue 1,3-diaza-2-oxophenoxazine, tC(O), is highly fluorescent, both as free nucleoside and incorporated in an arbitrary DNA structure. tC(O) is thoroughly characterized with respect to its photophysical properties and structural performance in single- and double-stranded oligonucleotides. The lowest energy absorption band at 360 nm (epsilon = 9000 M(-1) cm(-1)) is dominated by a single in-plane polarized electronic transition and the fluorescence, centred at 465 nm, has a quantum yield of 0.3. When incorporated into double-stranded DNA, tC(O) shows only minor variations in fluorescence intensity and lifetime with neighbouring bases, and the average quantum yield is 0.22. These features make tC(O), on average, the brightest DNA-incorporated base analogue so far reported. Furthermore, it base pairs exclusively with guanine and causes minimal perturbations to the native structure of DNA. These properties make tC(O) a promising base analogue that is perfectly suited for e.g. photophysical studies of DNA interacting with macromolecules (proteins) or for determining size and shape of DNA tertiary structures using techniques such as fluorescence anisotropy and fluorescence resonance energy transfer (FRET).

Triplex addressability as a basis for functional DNA nanostructures.

Here, we present the formation of a fully addressable DNA nanostructure that shows the potential to be exploited as, for example, an information storage device based on pH-driven triplex strand formation or nanoscale circuits based on electron transfer. The nanostructure is composed of two adjacent hexagonal unit cells (analogous to naphthalene) in which each of the eleven edges has a unique double-stranded DNA sequence, constructed using novel three-way oligonucleotides. This allows each ten base-pair side, just 3.4 nm in length, to be assigned a specific address according to its sequence. Such constructs are therefore an ideal precursor to a nonrepetitive two-dimensional grid on which the "addresses" are located at a precise and known position. Triplex recognition of these addresses could function as a simple yet efficient means of information storage and retrieval. Future applications that may be envisaged include nanoscale circuits as well as subnanometer precision in nanoparticle templating. Characterization of these precursor nanostructures and their reversible targeting by triplex strand formation is shown here using gel electrophoresis, atomic force microscopy, and fluorescence resonance energy transfer (FRET) measurements. The durability of the system to repeated cycling of pH switching is also confirmed by the FRET studies.

Conformational dynamics of DNA polymerase probed with a novel fluorescent DNA base analogue.

DNA polymerases discriminate between correct and incorrect nucleotide substrates during a "nonchemical" step that precedes phosphodiester bond formation in the enzymatic cycle of nucleotide incorporation. Despite the importance of this process in polymerase fidelity, the precise nature of the molecular events involved remains unknown. Here we report a fluorescence resonance energy transfer (FRET) system that monitors conformational changes of a polymerase-DNA complex during selection and binding of nucleotide substrates. This system utilizes the fluorescent base analogue 1,3-diaza-2-oxophenothiazine (tC) as the FRET donor and Alexa-555 (A555) as the acceptor. The tC donor was incorporated within a model DNA primer/template in place of a normal base, adjacent to the primer 3' terminus, while the A555 acceptor was attached to an engineered cysteine residue (C751) located in the fingers subdomain of the Klenow fragment (KF) polymerase. The FRET efficiency increased significantly following binding of a correct nucleotide substrate to the KF-DNA complex, showing that the fingers had closed over the active site. Fluorescence anisotropy titrations utilizing tC as a reporter indicated that the DNA was more tightly bound by the polymerase under these conditions, consistent with the formation of a closed ternary complex. The rate of the nucleotide-induced conformational transition, measured in stopped-flow FRET experiments, closely matched the rate of correct nucleotide incorporation, measured in rapid quench-flow experiments, indicating that the conformational change was the rate-limiting step in the overall cycle of nucleotide incorporation for the labeled KF-DNA system. Taken together, these results indicate that the FRET system can be used to probe enzyme conformational changes that are linked to the biochemical function of DNA polymerase.

Synthesis and oligonucleotide incorporation of fluorescent cytosine analogue tC: a promising nucleic acid probe.

The tricyclic cytosine, tC, is a fluorescent base analogue with excellent properties for investigating intrinsic characteristics of nucleic acid as well as interactions between nucleic acids and other molecules. Its unique fluorescence properties and insignificant influence on overall structure and dynamics of nucleic acid after incorporation makes tC particularly interesting in fluorescence resonance energy transfer and anisotropy measurements. We here describe a straightforward synthesis of the standard monomer form of tC for DNA solid-phase synthesis, the tC phosphoramidite, and its subsequent incorporation into oligonucleotides. The total synthesis of the tC phosphoramidite takes approximately 8 days and its incorporation and the subsequent oligonucleotide purification an additional day.

Fluorescent properties of DNA base analogue tC upon incorporation into DNA--negligible influence of neighbouring bases on fluorescence quantum yield.

The quantum yield of the fluorescent tricyclic cytosine analogue, 1,3-diaza-2-oxophenothiazine, tC, is high and virtually unaffected by incorporation into both single- and double-stranded DNA irrespective of neighbouring bases (0.17-0.24 and 0.16-0.21, respectively) and the corresponding fluorescence decay curves are all mono-exponential, properties that are unmatched by any base analogue so far. The fluorescence lifetimes increase when going from tC free in solution (3.2 ns) to single- and double-stranded DNA (on average 5.7 and 6.3 ns, respectively). The mono-exponential decays further support previous NMR results where it was found that tC has a well-defined position and geometry within the DNA helix. Furthermore, we find that the oxidation potential of tC is 0.4 V lower than for deoxyguanosine, the natural base with the lowest oxidation potential. This suggests that tC may be of interest in charge transfer studies in DNA as an electron hole acceptor. We also present a novel synthetic route to the phosphoramidite form of tC. The results presented here together with previous work show that tC is a very good C-analogue that induces minimal perturbation to the native structure of DNA. This makes tC unique as a fluorescent base analogue and is thus highly interesting in a range of applications for studying e.g. structure, dynamics and kinetics in nucleic acid systems.

DNA adopts normal B-form upon incorporation of highly fluorescent DNA base analogue tC: NMR structure and UV-Vis spectroscopy characterization.

The influence of the highly fluorescent tricyclic cytosine base analogue (tC) on duplex DNA conformation is investigated. The duplex properties are characterized by absorbance and circular dichroism (CD) for all combinations of neighbouring bases to tC, and an NMR structure is determined for one tC-containing sequence. For the oligonucleotides with one tC incorporated instead of cytosine, the melting temperature is increased on average by 2.7 degrees C above that for the unmodified ones. CD spectra are practically identical for modified and unmodified sequences, indicating an unperturbed B-DNA conformation. The NMR structure determination of the self-complementary sequence 5'-CTC(tC)ACGTGGAG shows a DNA conformation consistent with B-form for the whole duplex. The root-mean-square distance for the nucleotides of the eight central base pairs between the 10 structures with lowest CYANA target functions and a mean structure is 0.45 +/- 0.17 A. The NMR data confirm correct base pairing for tC by the observation of both intrastrand and interstrand imino proton NOEs. Altogether, this suggests that tC works well as a cytosine analogue, i.e. it is situated in the base stack, forming hydrogen bonds with G in the complementary strand, without distorting the DNA backbone conformation. This first example of an artificial, highly fluorescent DNA base that does not perturb the DNA conformation could have valuable applications for the study of the structure and dynamics of nucleic acid systems.