Reversible Cl/Cl- redox in a spinel Mn3O4 electrode.

A unique prospect of using halides as charge carriers is the possibility of the halides undergoing anodic redox behaviors when serving as charge carriers for the charge-neutrality compensation of electrodes. However, the anodic conversion of halides to neutral halogen species has often been irreversible at room temperature due to the emergence of diatomic halogen gaseous products. Here, we report that chloride ions can be reversibly converted to near-neutral atomic chlorine species in the Mn3O4 electrode at room temperature in a highly concentrated chloride-based aqueous electrolyte. Notably, the Zn2+ cations inserted in the first discharge and trapped in the Mn3O4 structure create an environment to stabilize the converted chlorine atoms within the structure. Characterization results suggest that the Cl/Cl- redox is responsible for the observed large capacity, as the oxidation state of Mn barely changes upon charging. Computation results corroborate that the converted chlorine species exist as polychloride monoanions, e.g., [Cl3]- and [Cl5]-, inside the Zn2+-trapped Mn3O4, and the presence of polychloride species is confirmed experimentally. Our results point to the halogen plating inside electrode lattices as a new charge-storage mechanism.

Li2 MnO3 : A Catalyst for a Liquid Cl2 Electrode in Low-Temperature Aqueous Batteries.

Li2 MnO3 has been contemplated as a high-capacity cathode candidate for Li-ion batteries; however, it evolves oxygen during battery charging under ambient conditions, which hinders a reversible reaction. However, it is unclear if this irreversible process still holds under subambient conditions. Here, the low-temperature electrochemical properties of Li2 MnO3 in an aqueous LiCl electrolyte are evaluated and a reversible discharge capacity of 302 mAh g-1 at a potential of 1.0 V versus Ag/AgCl at -78 °C with good rate capability and stable cycling performance, in sharp contrast to the findings in a typical Li2 MnO3 cell cycled at room temperature, is observed. However, the results reveal that the capacity does not originate from the reversible oxygen oxidation in Li2 MnO3 but the reversible Cl2 (l)/Cl- (aq.) redox from the electrolyte. The results demonstrate the good catalytic properties of Li2 MnO3 to promote the Cl2 /Cl- redox at low temperatures.

Ball Milling-Enabled Fe2.4+ to Fe3+ Redox Reaction in Prussian Blue Materials for Long-Life Aqueous Sodium-Ion Batteries.

Aqueous Na-ion batteries using Prussian blue materials have inherent advantages in safety, material sustainability, and economic cost. However, it is challenging to obtain long-term cycling stability because many redox reactions have poor intrinsic stability in water. Here, we demonstrate reversible Fe2.4+ to Fe3+ redox reaction of Prussian blue electrodes cycled in a 17 m NaClO4 water-in-salt electrolyte. The cubic phase c-Na1.17Fe[Fe(CN)6]·0.35H2O) derived from monoclinic Prussian blue (m-Na1.88Fe[Fe(CN)6]·0.7H2O) through ball milling delivers excellent cycling stability of >18,000 cycles with >90% capacity retention at the 10C rate. The specific capacity is ∼75 and ∼67 mAh/g at 1C and 10C rates, respectively. Systematic characterizations including electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy have verified the phase transition and iron oxidation state evolution, revealing the mechanism that enables the material's high rate and long durability as the battery cathode.

Strengthening Aqueous Electrolytes without Strengthening Water.

Aqueous electrolytes typically suffer from poor electrochemical stability; however, eutectic aqueous solutions-25 wt.% LiCl and 62 wt.% H3 PO4 -cooled to -78 °C exhibit a significantly widened stability window. Integrated experimental and simulation results reveal that, upon cooling, Li+ ions become less hydrated and pair up with Cl- , ice-like water clusters form, and H⋅⋅⋅Cl- bonding strengthens. Surprisingly, this low-temperature solvation structure does not strengthen water molecules' O-H bond, bucking the conventional wisdom that increasing water's stability requires stiffening the O-H covalent bond. We propose a more general mechanism for water's low temperature inertness in the electrolyte: less favorable solvation of OH- and H+ , the byproducts of hydrogen and oxygen evolution reactions. To showcase this stability, we demonstrate an aqueous Li-ion battery using LiMn2 O4 cathode and CuSe anode with a high energy density of 109 Wh/kg. These results highlight the potential of aqueous batteries for polar and extraterrestrial missions.

Reversible Copper Cathode for Nonaqueous Dual-Ion Batteries.

Most reported cathodes of nonaqueous dual-ion batteries (DIBs) host anions via insertion reactions. It is necessary to explore new cathode chemistry to increase the battery energy density. To date, transition metals have yet to be investigated for nonaqueous DIBs, albeit they may offer high capacity in anodic conversion reactions. Here, we report that bulk copper powder exhibits a high reversible capacity of 762 mAh g-1 at 3.2 V vs. Li+ /Li and relatively stable cycling in common organic electrolytes. The operation of the copper electrode is coupled with the transfer of anion charge carriers. An anion exchange membrane separator is employed to prevent Cu2+ from crossing from the catholyte to the anode side. We designed an unbalanced electrolyte with a more concentrated anolyte than a catholyte. This addresses the concentration overpotential ensued during charge and facilitates the high specific capacity and enhanced reversibility. This finding provides a promising direction for high-energy DIBs.

Copper metal electrode reversibly hosts fluoride in a 16 m KF aqueous electrolyte.

Fluoride is a promising charge carrier for batteries due to its high charge/mass ratio and small radius. Here, we report commercial copper powder exhibits a reversible capacity of up to 222 mA h g-1 in a saturated electrolyte of 16 m KF. This electrolyte suppresses dissolution of CuF2, the charged product. Furthermore, the KF solid comprised in the Cu electrode facilitates a high initial capacity. Our results showcase the potential of aqueous fluoride batteries using copper as an electrode.

From Copper to Basic Copper Carbonate: A Reversible Conversion Cathode in Aqueous Anion Batteries.

Dual-ion batteries that use anions and cations as charge carriers represent a promising energy-storage technology. However, an uncharted area is to explore transition metals as electrodes to host carbonate in conversion reactions. Here we report the reversible conversion reaction from copper to Cu2 CO3 (OH)2 , where the copper electrode comprising K2 CO3 and KOH solid is self-sufficient with anion-charge carriers. This electrode dissociates and associates K+ ions during battery charge and discharge. The copper active mass and the anion-bearing cathode exhibit a reversible capacity of 664 mAh g-1 and 299 mAh g-1 , respectively, and relatively stable cycling in a saturated mixture electrolyte of K2 CO3 and KOH. The results open an avenue to use carbonate as a charge carrier for batteries to serve for the consumption and storage of CO2 .

Acid-in-Clay Electrolyte for Wide-Temperature-Range and Long-Cycle Proton Batteries.

Proton conduction underlies many important electrochemical technologies. A family of new proton electrolytes is reported: acid-in-clay electrolyte (AiCE) prepared by integrating fast proton carriers in a natural phyllosilicate clay network, which can be made into thin-film (tens of micrometers) fluid-impervious membranes. The chosen example systems (sepiolite-phosphoric acid) rank top among the solid proton conductors in terms of proton conductivities (15 mS cm-1 at 25 °C, 0.023 mS cm-1 at -82 °C), electrochemical stability window (3.35 V), and reduced chemical reactivity. A proton battery is assembled using AiCE as the solid electrolyte membrane. Benefitting from the wider electrochemical stability window, reduced corrosivity, and excellent ionic selectivity of AiCE, the two main problems (gassing and cyclability) of proton batteries are successfully solved. This work draws attention to the element cross-over problem in proton batteries and the generic "acid-in-clay" solid electrolyte approach with superfast proton transport, outstanding selectivity, and improved stability for room- to cryogenic-temperature protonic applications.

Fe-Ion Bolted VOPO4 ∙2H2 O as an Aqueous Fe-Ion Battery Electrode.

Iron ion batteries using Fe2+ as a charge carrier have yet to be widely explored, and they lack high-performing Fe2+ hosting cathode materials to couple with the iron metal anode. Here, it is demonstrated that VOPO4 ∙2H2 O can reversibly host Fe2+ with a high specific capacity of 100 mAh g-1 and stable cycling performance, where 68% of the initial capacity is retained over 800 cycles. In sharp contrast, VOPO4 ∙2H2 O's capacity of hosting Zn2+ fades precipitously over tens of cycles. VOPO4 ∙2H2 O stores Fe2+ with a unique mechanism, where upon contacting the electrolyte by the VOPO4 ∙2H2 O electrode, Fe2+ ions from the electrolyte get oxidized to Fe3+ ions that are inserted and trapped in the VOPO4 ∙2H2 O structure in an electroless redox reaction. The trapped Fe3+ ions, thus, bolt the layered structure of VOPO4 ∙2H2 O, which prevents it from dissolution into the electrolyte during (de)insertion of Fe2+ . The findings offer a new strategy to use a redox-active ion charge carrier to stabilize the layered electrode materials.

Reversible electrochemical conversion from selenium to cuprous selenide.

Using elemental selenium as an electrode, the redox-active Cu2+/Cu+ ion is reversibly hosted via the sequential conversion reactions of Se → CuSe → Cu3Se2 → Cu2Se. The four-electron redox process from Se to Cu2Se produces a high initial specific capacity of 1233 mA h g-1 based on the mass of selenium alone or 472 mA h g-1 based on the mass of Cu2Se, the fully discharged product.