Causal impact of DNA methylation on refracture in elderly individuals with osteoporosis - a prospective cohort study.

BACKGROUND: Osteoporotic vertebral compression fractures (OVCF) in the elderly increase refracture risk post-surgery, leading to higher mortality rates. Genome-wide association studies (GWAS) have identified susceptibility genes for osteoporosis, but the phenotypic variance explained by these genes has been limited, indicating the need to explore additional causal factors. Epigenetic modifications, such as DNA methylation, may influence osteoporosis and refracture risk. However, prospective cohorts for assessing epigenetic alterations in Chinese elderly patients are lacking. Here, we propose to conduct a prospective cohort study to investigate the causal network of DNA polymorphisms, DNA methylation, and environmental factors on the development of osteoporosis and the risk of refracture. METHODS: We will collect vertebral and peripheral blood from 500 elderly OVCF patients undergoing surgery, extract DNA, and generate whole genome genotype data and DNA methylation data. Observation indicators will be collected and combined with one-year follow-up data. A healthy control group will be selected from a natural population cohort. Epigenome-wide association studies (EWAS) of osteoporosis and bone mineral density will be conducted. Differential methylation analysis will compare candidate gene methylation patterns in patients with and without refracture. Multi-omics prediction models using genetic variants and DNA methylation sites will be built to predict OVCF risk. DISCUSSION: This study will be the first large-scale population-based study of osteoporosis and bone mineral density phenotypes based on genome-wide data, multi-time point methylation data, and phenotype data. By analyzing methylation changes related to osteoporosis and bone mineral density in OVCF patients, the study will explore the feasibility of DNA methylation in evaluating postoperative osteoporosis intervention effects. The findings may identify new molecular markers for effective anti-osteoporosis treatment and inform individualized prevention and treatment strategies. TRIAL REGISTRATION: chictr.org.cn ChiCTR2200065316, 02/11/2022.

Global Trends and Hotspots of Minimally Invasive Surgery in Lumbar Spinal Stenosis: A Bibliometric Analysis.

Objective: The popularity of minimally invasive surgery for lumbar spinal stenosis (LSS) has been steadily increasing worldwide. This study aims to conduct a comprehensive bibliometric analysis to identify global trends and hotspots in the research related to this surgical approach. Methods: Select articles related to the field that were retrieved from the Web of Science Core Collection (WoSCC) between January 1, 1993 and December 31, 2022. Visualization of networks and in-depth bibliometric analyses, including the number of publications, countries/regions, institutions, journals, authors, keywords, and references, were conducted using VOSviewer and CiteSpace software. Results: A total of 1197 papers were identified over a three-decade period, with the highest production year being 2022, which saw 171 papers published. The most prolific countries/regions were the United States (279) and Harvard Medical School (59). Among journals, Spine (3289 citations) was the most cited, while World Neurosurgery (98 publications) had the highest number of publications. Lewandrowski, Kai-Uwe (29 publications) wrote the most articles, and Ahn, Y (239 citations) ranked first among cited authors. The most frequently used keyword was "discectomy", but recent years have shown a strong emergence of keywords such as "microendoscopic decompressive laminotomy", "foraminotomy" and "classification". Conclusion: The United States and China have emerged as leaders in the field of minimally invasive surgery for LSS. Endoscopic spinal surgery is recognized as a critical approach, with ongoing research focused on indications, potential complications, minimally invasive anatomical approaches, and outcomes. Furthermore, there is a strong emphasis on optimizing the surgical process, which has become a trending and hot spot in current research. The improvement of surgical techniques is at the forefront of advancements in this field.

[Effect of folic acid coated-crosslinked urethane-doped polyester elastomer nerve conduit on promoting the repair of long distance peripheral nerve injury in rats].

Objective: To investigate the effect of folic acid coated-crosslinked urethane-doped polyester elastomer (fCUPE) nerve conduit in repairing long distance peripheral nerve injury. Methods: Thirty-six 3-month-old male Sprague Dawley rats weighing 180-220 g were randomly assigned to 3 groups, each consisting of 12 rats: CUPE nerve conduit transplantation group (group A), fCUPE nerve conduit transplantation group (group B), and autologous nerve transplantation group (group C), the contralateral healthy limb of group C served as the control group (group D). A 20-mm-long sciatic nerve defect model was established in rats, and corresponding materials were used to repair the nerve defect according to the group. The sciatic function index (SFI) of groups A-C was calculated using the Bain formula at 1, 2, and 3 months after operation. The nerve conduction velocity (NCV) of the affected side in groups A-D was assessed using neuroelectrophysiological techniques. At 3 months after operation, the regenerated nerve tissue was collected from groups A-C for S-100 immunohistochemical staining and Schwann cell count in groups A and B to compare the level of nerve repair and regeneration in each group. Results: At 3 months after operation, the nerve conduits in all groups partially degraded. There was no significant adhesion between the nerve and the conduit and the surrounding tissues, the conduit was well connected with the distal and proximal nerves, and the nerve-like tissues in the conduit could be observed when the nerve conduit stents were cut off. SFI in group A was significantly higher than that in group C at each time point after operation and was significantly higher than that in group B at 2 and 3 months after operation ( P<0.05). There was no significant difference in SFI between groups B and C at each time point after operation ( P>0.05). NCV in group A was significantly slower than that in the other 3 groups at each time point after operation ( P<0.05). The NCV of groups B and C were slower than that of group D, but the difference was significant only at 1 month after operation ( P<0.05). There was no significant difference between groups B and C at each time point after operation ( P>0.05). Immunohistochemical staining showed that the nerve tissue of group A had an abnormal cavo-like structure, light tissue staining, and many non-Schwann cells. In group B, a large quantity of normal neural structures was observed, the staining was deeper than that in group A, and the distribution of dedifferentiated Schwann cells was obvious. In group C, the nerve bundles were arranged neatly, and the tissue staining was the deepest. The number of Schwann cells in group B was (727.50±57.60) cells/mm 2, which was significantly more than that in group A [(298.33±153.12) cells/mm 2] ( t=6.139, P<0.001). Conclusion: The fCUPE nerve conduit is effective in repairing long-distance sciatic nerve defects and is comparable to autologous nerve grafts. It has the potential to be used as a substitute material for peripheral nerve defect transplantation.

New Insights into the Regulatory Role of Ferroptosis in Ankylosing Spondylitis via Consensus Clustering of Ferroptosis-Related Genes and Weighted Gene Co-Expression Network Analysis.

Background: The pathogenesis of ankylosing spondylitis (AS) remains undetermined. Ferroptosis is a newly discovered form of regulated cell death involved in multiple autoimmune diseases. Currently, there are no reports on the connection between ferroptosis and AS. Methods: AS samples from the Gene Expression Omnibus were divided into two subgroups using consensus clustering of ferroptosis-related genes (FRGs). Weighted gene co-expression network analysis (WGCNA) of the intergroup differentially expressed genes (DEGs) and protein-protein interaction (PPI) analysis of the key module were used to screen out hub genes. A multifactor regulatory network was then constructed based on hub genes. Results: The 52 AS patients in dataset GSE73754 were divided into cluster 1 (n = 24) and cluster 2 (n = 28). DEGs were mainly enriched in pathways related to mitochondria, ubiquitin, and neurodegeneration. Candidate hub genes, screened by PPI and WGCNA, were intersected. Subsequently, 12 overlapping genes were identified as definitive hub genes. A multifactor interaction network with 45 nodes and 150 edges was generated, comprising the 12 hub genes and 32 non-coding RNAs. Conclusions: AS can be divided into two subtypes according to FRG expression. Ferroptosis might play a regulatory role in AS. Tailoring treatment according to the ferroptosis status of AS patients can be a promising direction.

Depression and anxiety in cervical degenerative disc disease: Who are susceptible?

Background: Pre-operative depression and anxiety are associated with poorer patient-reported outcomes following cervical spine surgery. Identification of and interventions for these disorders are key to preventing related negative effects. However, most spine surgeons do not routinely evaluate mental health disorders. Few studies have investigated which patients with cervical degenerative disc diseases (CDDD) are susceptible to depression and anxiety. Objective: To determine the factors associated with depression and anxiety in patients with CDDD. Methods: Three hundred twelve patients with CDDD were recruited in this cross-sectional case-control study. Patients underwent a structured interview to acquire demographic and clinical characteristic information, which included the Neck Disability Index (NDI), modified Japanese Orthopedic Association (mJOA), and Visual Analog Scale (VAS) for neck/arm pain. Depression and anxiety were evaluated using the Zung Self-Rating Depression and Anxiety Scales. Univariate and multivariate logistic regression analyses were used to identify factors associated with depression and anxiety. Results: Of all patients, 102 (32.7%) had depression and 92 (29.5%) had anxiety. Two hundred six (66.0%) patients with neither depression nor anxiety were defined as the control group. Univariate analysis indicated that gender, educational level, occupation type, Charlson comorbidity index, symptom duration, symptomatology, surgery history, NDI, mJOA, VAS-neck, and VAS-arm scores were associated with depression and anxiety (except for symptom duration for anxiety). Multivariate logistic regression analysis indicated that females [odds ratio (OR) 1.81, 95% confidence interval (CI) 1.01-3.23], physical work (OR 2.06, 95% CI 1.16-3.65), poor mJOA score (ORmoderate 2.67, 95% CI 1.40-5.07; ORsevere 7.63, 95% CI 3.85-15.11), and high VAS-neck score (OR 1.24, 95% CI 1.11-1.39) were independent risk factors for depression. Physical work (OR 1.84, 95% CI 1.01-3.35), poor mJOA score (ORmoderate 2.66, 95% CI 1.33-5.33; ORsevere 9.26, 95% CI 4.52-18.99), and high VAS-neck score (OR 1.34, 95% CI 1.19-1.51) were independent risk factors for anxiety. Conclusion: Approximately one-third of patients with CDDD had depression or anxiety. Patients who engaged in heavy work and had severe symptoms (poor mJOA and high VAS-neck scores) are susceptible to depression and anxiety. Additionally, female patients are susceptible to depression. Our findings may help identify CDDD patients with depression and anxiety in clinical practice.

Clinical impact of 3-level anterior cervical decompression and fusion (ACDF) on the occipito-atlantoaxial complex: a retrospective study of patients who received a zero-profile anchored spacer versus cage-plate construct.

PURPOSE: To evaluate changes in the sagittal parameters of the occipito-atlantoaxial complex after three-level anterior cervical decompression and fusion (ACDF) and identify the influential factors by comparing ACDF with a zero-profile anchored spacer (ACDF-Z) versus a cage-plate construct (ACDF-P). METHODS: The cohort comprised 106 patients who underwent three-level contiguous ACDF-Z or ACDF-P for cervical radiculopathy and/or myelopathy. Standing, flexion, and extension radiographs of cervical spine were obtained preoperatively, and 3 and 12 months postoperatively. The assessed cervical sagittal parameters were the platform angle of the axis, Cobb angle, and range of motion (ROM) of C2⁃7, C0⁃1, and C1⁃2. RESULTS: In both the ACDF-Z and ACDF-P groups, the Cobb angle of the upper cervical spine decreased and the C0-1 ROM increased from preoperatively to 3 and 12 months postoperatively (P < 0.01). The alignment restoration was lost at 12 months compared with 3 months in the ACDF-Z group, but not in the ACDF-P group (P < 0.01). The ACDF-P group showed more loss of C2-7 ROM and more compensatory changes in C0-2 ROM than the ACDF-Z group (P < 0.05). CONCLUSION: The Cobb angle decreased and ROM increased significantly as compensatory changes of the atlantooccipital or atlantoaxial joint after both types of ACDF, which may accelerate degeneration. The zero-profile anchored spacer had less impact on the occipito-atlantoaxial complex but was worse at maintaining the alignment restoration, which were contrary to the cage-plate construct. Surgeons should be aware of the impact of multi-level ACDFs on the occipito-atlantoaxial complex.

The effect of cervical intervertebral disc degeneration on the motion path of instantaneous center of rotation at degenerated and adjacent segments: A finite element analysis.

BACKGROUND: The motion path of instantaneous center of rotation (ICR) is a crucial kinematic parameter to dynamically characterize cervical spine intervertebral patterns of motion; however, few studies have evaluated the effect of cervical disc degeneration (CDD) on ICR motion path. The purpose of this study was to investigate the effect of CDD on the ICR motion path of degenerated and adjacent segments. METHOD: A validated nonlinear three-dimensional finite element (FE) model of a healthy adult cervical spine was used. Progressive degeneration was simulated with six FE models by modifying intervertebral disc height and material properties, anterior osteophyte size, and degree of endplate sclerosis at the C5-C6 level. All models were subjected to a pure moment of 1 Nm and a compressive follower load of 73.6 N to simulate physical motion. ICR motion paths were compared among different models. RESULTS: The normal FE model results were consistent with those of previous studies. In degenerative models, average ICR motion paths shifted significantly anterior at the degenerated segment (ß = 0.27 mm; 95% CI: 0.22, 0.32) and posterior at the proximal adjacent segment (ß = -0.09 mm; 95% CI: -0.15, -0.02) than those of the normal model. CONCLUSION: CDD significantly affected ICR motion paths at the degenerated and proximal adjacent segments. The changes at adjacent segments may be a result of compensatory mechanisms to maintain the balance of the cervical spine. Surgical treatment planning should take into account the restoration of ICR motion path to normal. These findings could provide a basis for prosthesis design and clinical practice.

An Unrecognized Ligament and its Ossification in the Craniocervical Junction: Prevalence, Patient Characteristics, and Anatomic Evidence.

BACKGROUND: In the craniocervical junction, the ligaments between the anterior foramen magnum and the anterior arch of the atlas are not well defined, and ossification of the ligaments in this region has rarely been reported. Characterizing the anatomy and ossification of these ligaments may help in the diagnosis and treatment of disorders in this region. QUESTIONS/PURPOSES: (1) What is the prevalence of an unrecognized ossification at the craniocervical junction in patients with cervical spine disorders, and what are the patient characteristics associated with this ossification? (2) Do patients with this ossification have a greater risk of ossification of other structures at the craniocervical junction or cervical spine? (3) Is there an unreported ligament at this ossified site? METHODS: We conducted a retrospective study of 578 hospitalized patients who underwent CT for cervical spine disorders between January 2016 and July 2020. Based on the inclusion criteria, 11% (66 of 578) were excluded because of a cervical or craniocervical tumor, deformity, infection, fracture or dislocation, or prior surgery, leaving 89% (512 of 578) for analysis. These 512 patients had diagnoses of cervical radiculopathy, cervical myelopathy, cervical spondylotic amyotrophy, cervical spinal cord injury without a radiographic abnormality, or axial neck pain. Their mean age was 57 years (range 22-90 years), and 60% of the patients were men. Patient characteristics including age, gender, and diagnosis were retrieved from a longitudinally maintained institutional database. CT images were used to assess the presence of a previously unrecognized ossification and ossification of other structures in the craniocervical junction and cervical spine, including the posterior longitudinal ligament, anterior longitudinal ligament, nuchal ligament, ligamentum flavum, transverse ligament, and apical ligament, as well as diffuse idiopathic skeletal hyperostosis (DISH). The association between these structures was also assessed. This unreported ossification was called the capped dens sign. It was defined and graded from 1 to 3. Grade 3 was defined as the typical capped dens sign. Cervical spine MRI was used to assess whether there was an unreported structure in the same region as where the capped dens sign was detected on CT images. In the database of a recent study, there were 33 patients younger than 41 years. Nine percent (three of 33) were excluded because they did not have cervical spine MRI. MRIs of the remaining 30 patients were assessed. Their mean age was 35 years (range 22-40 years), and 58% were men. All cervical spine CT images and MRIs were reviewed by one senior spine surgeon and one junior spine surgeon twice with a 2-week interval. Blinding was accomplished by removing identifying information from the radiographs and randomly assigning them to each examiner. Any discrepancy with respect to the grade of the capped dens sign was adjudicated by a third blinded senior spine surgeon. Intrarater and interrater reliabilities were assessed by calculating weighted kappa statistics. No ligament or membrane was reported at this site. MRI is not sensitive to identify thin tissue in this region, especially when severe degeneration has occurred. A cadaveric study was conducted to discover a potential ligament between the inferior margin of the foramen magnum and the anterior arch of the atlas, as prompted by the newly discovered ossification in the clinical analysis of this study. Six embalmed human cadaveric craniocervical regions (three male and three female cadavers; median age 56 years, range 45-78 years) were dissected by a senior anatomist and a senior anatomy technician. A mid-sagittal section of the craniocervical junction was created, allowing us to explore the interval between the anterior foramen magnum and anterior arch of the atlas. A histologic analysis was conducted in two of the six cadavers (a male cadaver, 45 years; and a female cadaver, 51 years). Slides were made with 4-µm sections and stained with hematoxylin and eosin. RESULTS: A novel capped dens sign was detected in 39% (198 of 512) of the patients and the most typical capped dens sign was detected in 19% (96 of 512) of patients. The prevalence of this sign was the highest in patients with cervical spondylotic amyotrophy (12 of 25 patients). The prevalence of ossification of the anterior longitudinal ligament, ligamentum nuchae, and apical ligament, as well as DISH, was higher in patients with a capped dens sign than in those without (p = 0.04, p < 0.001, p < 0.001, and p = 0.001, respectively). The capped dens sign was identified in 69% (18 of 26) of the patients with DISH. A thin and short band-like structure or osteophyte was detected on MRI in 87% (26 of 30), in the same region as the capped dens sign. In the cadaveric study, an unreported, distinct ligamentous structure was identified at this ossified site. It originated from the posterosuperior rim of the anterior arch of the atlas to the inferior margin of the foramen magnum, which we called the inter-atlanto-occipital ligament. It was found in all six dissected craniocervical junctions. The histologic analysis revealed dense connective tissue. CONCLUSION: More than one-third of the patients in this series demonstrated CT evidence of a previously unrecognized ossification in the craniocervical junction, which we called the capped dens sign. Anatomic evidence of this sign, which was a previously unidentified ligament, was also newly discovered in this region. This study was conducted among Asian patients and specimens. Further studies among diverse ethnic groups may be needed to generalize the results. An additional well-designed prospective study will be needed to provide further evidence regarding the potential pathophysiology and clinical relevance of the capped dens sign. Furthermore, the cadaveric analysis in this study was only a preliminary report of the ligament; further biomechanical research is needed to investigate its function. CLINICAL RELEVANCE: Knowledge of this novel ligament may improve the diagnosis and treatment of craniocervical stability and dislocation. Ossification of this ligament is correlated with age, cervical spondylotic amyotrophy, and DISH. We wonder whether patients with cervical degenerative disorders who also have a capped dens sign may be at risk for the formation of osteophytes of an uncovertebral joint, which may result in palsy of the upper limb muscles. The capped dens sign may be the craniocervical manifestation of DISH. This possible association between the capped dens sign and DISH should be considered when performing surgery on patients with the capped dens sign.

The association between cervical focal kyphosis and myelopathy severity in patients with cervical spondylotic myelopathy before surgery.

PURPOSE: Cervical focal kyphosis could often be observed in patients with cervical spondylotic myelopathy (CSM). However, the association between it and myelopathy severity remains unclear. This study aims to elucidate the association between cervical focal kyphosis and myelopathy severity before surgery. METHODS: A retrospective review of 191 consecutive patients treated for CSM from 2017 to 2019 was surveyed. Seven MRI and five radiographic parameters were measured, clinical parameters were included. Patients were divided into two sagittal focal angle groups (lordosis/kyphosis) and two disc herniation severity groups (severe/non-severe). The potential risk factors of myelopathy symptoms were analysed. RESULTS: Significant correlations between cervical sagittal focal angles, several other imaging findings and myelopathy severity were found in both total patients (R2 = 0.51, P < 0.001) and non-severe disc herniation patients (R2 = 0.73, P < 0.001) in multivariate regression models. Compression ratio of spinal cord exhibited the strongest correlation with JOA scores (r = - 0.567, P < 0.001). Cervical focal angles on MRI exhibited a stronger negative correlation with JOA scores (r = - 0.429, P < 0.001) than did angles on the other three postures on radiographs. Dramatic differences in JOA scores could be found in patients with non-severe cervical disc herniation, when a subgroup analysis was performed between cervical lordosis group and more than 4° kyphosis group (14.2 ± 1.7 vs. 11.1 ± 1.7, P < 0.001). CONCLUSION: Cervical focal kyphosis associates with severe myelopathy symptoms in patients with CSM, especially without severe disc herniation. This association may indicate an optimal cervical focal angle in surgical plan. It appeared feasible to assess both the cervical focal angles and spinal cord compression on supine MRI.

The Differences Among Kinematic Parameters for Evaluating the Quality of Intervertebral Motion of the Cervical Spine in Clinical and Experimental Studies: Concepts, Research and Measurement Techniques. A Literature Review.

BACKGROUND: The center of rotation (COR), instantaneous center of rotation (ICR), instantaneous axis of rotation, instantaneous helical axis, finite helical axis, and helical axis of motion are important kinematic parameters for evaluating the quality of intervertebral motion of the cervical spine (QIMC). These parameters embody different concepts and are calculated using various methods. In this review, the distinctions and connections between these kinematic parameters are analyzed according to the concepts, research, and measurement techniques to provide a theoretic basis for future research and new research directions. METHODS: The PubMed/MEDLINE databases were searched for studies published in English related to the concepts, research, and calculation of these parameters. The included studies were classified according to the different research or calculation methods, and the proportion of each study type was calculated and analyzed. RESULTS: Forty articles were selected. The methods for analyzing the QIMC include in vivo and in vitro studies and finite element analysis. The primary methods for calculating these parameters include the method of perpendicular bisectors and the finite helical axis method. CONCLUSIONS: COR was the simplest but not the most accurate parameter to evaluate the QIMC. Conversely, instantaneous helical axis/helical axis of motion were the most accurate, but relatively complex parameters to evaluate the QIMC. ICR showed dynamic changes during flexion-extension motion, but not the three-dimensional kinematic motion of the cervical spine. These parameters were equivalent only in certain situations but cannot be substituted for each other in the clinic. A dynamic radiographic in vivo study was the most convenient and frequently used research method to calculate COR, but failed to describe the dynamic movement. The method of perpendicular bisectors was widely used to calculate the COR or ICR. Therefore, a combination of new research and calculation methods to simply and effectively evaluate the QIMC requires further investigation.

How Center of Rotation Changes and What Affects These After Cervical Arthroplasty: A Systematic Review and Meta-analysis.

PURPOSE: To determine how center of rotation (COR) changes and what affects changes in COR after cervical arthroplasty. METHODS: A systematic literature review of in vivo clinical studies comparing the location of the COR before and after cervical arthroplasty with different artificial prostheses was performed. Meta-analysis was performed using a fixed effects model where appropriate. RESULTS: A systematic review of the PubMed, EMBASE, and Cochrane Library databases was conducted. We initially identified 267 studies, of which 14 involved in vivo kinematics studies evaluating COR following cervical arthroplasty. We found that at the last follow-up, the COR location shifted anteriorly in patients from 4 studies including 85 segments, superiorly in patients from 4 studies including 98 segments, anterior-superiorly in patients from 4 studies including 290 segments, and anterior-inferiorly in patients from 1 study including 272 segments after cervical arthroplasty. The COR location showed no significant change in patients from 5 studies including 106 segments after cervical arthroplasty. Changes in COR showed a certain trend after cervical arthroplasty with different types of prostheses. CONCLUSIONS: Prosthesis design affects changes in COR after cervical arthroplasty. If a constrained or semiconstrained prosthesis is chosen (2-piece implant, ball-and-socket, or ball-in-trough design), the COR location tends to shift anteriorly and/or superiorly, whereas if a nonconstrained prosthesis is chosen (3-piece implant, mobile nucleus design), the COR tends to keep the same location as preoperation. In addition, the position of the prosthesis in the intervertebral space also can affect changes in COR after cervical arthroplasty.

Using finite element analysis to determine effects of the motion loading method on facet joint forces after cervical disc degeneration.

BACKGROUND: Understanding the biomechanical effects of cervical disc degeneration (CDD) on the cervical spine is fundamental for understanding the mechanisms of spinal disorders and improving clinical treatment. While the biomechanical effects of CDD on segmental flexibility and the posterior facets have been reported, a clear understanding of the effect of the motion loading method on facet joint forces after CDD is still lacking. Therefore, the objective of this study was to determine the effect of the motion loading method on facet joint forces after CDD. METHODS: A three-dimensional nonlinear finite element (FE) model of the cervical spine (C3-C7) was developed and validated to represent normal conditions. This normal model was modified to create six degenerative models simulating mild, moderate, and severe grades of disc degeneration at C5-C6. While under a follower compressive preload (73.6 N), a 1-Nm moment was applied to all models to determine range of motion (ROM). A displacement load was applied to all degenerative models under the same follower load, making the C5-C6 degeneration segment motion same to the ROM of C5-C6 in normal model, and facet joint forces were computed. RESULTS: Compared with the normal model, ROM of the C5-C6 degenerative segments dramatically declined in all postures with increasing degenerative pathologies in the disc. The ROM in the adjacent normal segments of the degenerative segments also declined, with the exception of C4-C5 during extension. Under a 1-Nm moment load, there were not obvious changes in facet joint forces in the C5-C6 degenerative segment with increasing grades of degeneration, but facet joint forces in the adjacent normal segments did increase. Under a displacement load, the facet joint forces of the C5-C6 degenerative segment increased with increasing grades of degeneration. CONCLUSIONS: Facet joint forces were positively correlated with the ROM of the degenerative segment, demonstrating that the motion loading method had a significant effect on facet joint forces after CDD. Loading conditions must be strictly controlled in future finite element analysis studies to improve the comparability between models built by different units.

Role of TRPP2 in mouse airway smooth muscle tension and respiration.

The transient receptor potential polycystin-2 (TRPP2) is encoded by the Pkd2 gene, and mutation of this gene can cause autosomal dominant polycystic kidney disease (ADPKD). Some patients with ADPKD experience extrarenal manifestations, including radiologic and clinical bronchiectasis. We hypothesized that TRPP2 may regulate airway smooth muscle (ASM) tension. Thus, we used smooth muscle-Pkd2 conditional knockout (Pkd2SM-CKO) mice to investigate whether TRPP2 regulated ASM tension and whether TRPP2 deficiency contributed to bronchiectasis associated with ADPKD. Compared with wild-type mice, Pkd2SM-CKO mice breathed more shallowly and faster, and their cross-sectional area ratio of bronchi to accompanying pulmonary arteries was higher, suggesting that TRPP2 may regulate ASM tension and contribute to the occurrence of bronchiectasis in ADPKD. In a bioassay examining isolated tracheal ring tension, no significant difference was found for high-potassium-induced depolarization of the ASM between the two groups, indicating that TRPP2 does not regulate depolarization-induced ASM contraction. By contrast, carbachol-induced contraction of the ASM derived from Pkd2SM-CKO mice was significantly reduced compared with that in wild-type mice. In addition, relaxation of the carbachol-precontracted ASM by isoprenaline, a ß-adrenergic receptor agonist that acts through the cAMP/adenylyl cyclase pathway, was also significantly attenuated in Pkd2SM-CKO mice compared with that in wild-type mice. Thus, TRPP2 deficiency suppressed both contraction and relaxation of the ASM. These results provide a potential target for regulating ASM tension and for developing therapeutic alternatives for some ADPKD complications of the respiratory system or for independent respiratory disease, especially bronchiectasis.

Clinical Relevance of Cervical Kinematic Quality Parameters in Planar Movement.

Comprehending cervical spinal motion underlies the understanding of the mechanisms of cervical disorders. We aimed to better define the clinical relevance of cervical spine kinematics, focusing on quality parameters describing cervical spine planar motion. The most common study focuses were kinematic quality parameters after cervical arthroplasty and in normal subjects, patients with cervical degeneration, and patients with cervical deformities. Kinematic quality parameters are important for cervical degeneration prevention, being detected sooner than differences on imaging examinations and being significantly related to the degree of cervical degeneration. Kinematic quality parameters are effective for evaluating the changes of cervical motion pattern after cervical fusion and non-fusion, assessing operative and adjacent segments in the early stages, and predicting adjacent segment degeneration. However, owing to current research limitations, and controversy about the changes of kinematic quality parameters after different surgical procedures, current assessments are limited to cervical spine flexion and extension. Different osteotomy methods of cervical deformity have different effects on cervical motion patterns and quality parameters. Choosing the most effective surgical method remains a challenge and kinematic quality parameters in cervical deformity are important future research topics. This review highlights the instantaneous center of rotation, the center of rotation, and the instantaneous axis of rotation as being important kinematic quality parameters of cervical spinal motion. These can be used to detect abnormal cervical mobility, to diagnose cervical degeneration, to design disc protheses, and to evaluate surgical effects earlier than other methods. Owing to limitations of research methods there is variation in the way parameters are defined by various researchers. No uniform standard exists for defining degenerative motion quality parameters in normal asymptomatic, degenerative, and postoperative patients. Therefore, further study is required. New study techniques and defining kinematic quality parameters in normal subjects will clarify the definitions of these parameters, enhancing their future clinical usefulness.