Trace elements in feed, manure, and manured soils.

Modern animal feeds often include nutritional mineral supplements, especially elements such as Cu, P, Se, and Zn. Other sources of trace elements also occur in livestock systems, such as pharmaceutical use of As and Zn to control gut flora, Bi in dairy for mastitis control, and Cu as hoof dips. Additionally, potential exists for inadvertent inclusion of trace elements in feeds or manures. There is concern about long-term accumulation of trace elements in manured soil that may even exceed guideline "safe" concentrations. This project measured ∼60 elements in 124 manure samples from broiler, layer, turkey, swine grower, swine nursery, sow, dairy, and beef operations. The corresponding feeds were also analyzed. In general, concentrations in manure were two- to fivefold higher than those in feed: the manure/feed concentration ratios were relatively consistent for all the animal-essential elements and were numerically similar for many of the non-nutrient elements. To confirm the potential for accumulation in soil, total trace element concentrations were measured in the profiles of 10 manured and 10 adjacent unmanured soils. Concentrations of several elements were found to be elevated in the manured soils, with Zn (and P) the most common. One soil from a dairy standing yard had concentrations of B that exceeded soil health guideline concentrations. Given that the Cu/P and Zn/P ratios found in manure were greater than typically reported in harvested crop materials, these elements will accumulate in soil even if manure application rates are managed to prevent accumulation of P in soil.

Plant/soil concentration ratios for paired field and garden crops, with emphasis on iodine and the role of soil adhesion.

In the effort to predict the risks associated with contaminated soils, considerable reliance is placed on plant/soil concentration ratio (CR) values measured at sites other than the contaminated site. This inevitably results in the need to extrapolate among the many soil and plant types. There are few studies that compare CR among plant types that encompass both field and garden crops. Here, CRs for 40 elements were measured for 25 crops from farm and garden sites chosen so the grain crops were in close proximity to the gardens. Special emphasis was placed on iodine (I) because data for this element are sparse. For many elements, there were consistent trends among CRs for the various crop types, with leafy crops > root crops ≥ fruit crops ≈ seed crops. Exceptions included CR values for As, K, Se and Zn which were highest in the seed crops. The correlation of CRs from one plant type to another was evident only when there was a wide range in soil concentrations. In comparing CRs between crop types, it became apparent that the relationships differed for the rare earth elements (REE), which also had very low CR values. The CRs for root and leafy crops of REE converged to a minimum value. This was attributed to soil adhesion, despite the samples being washed, and the average soil adhesion for root crops was 500 mg soil kg⁻¹ dry plant and for leafy crops was 5 g kg⁻¹. Across elements, the log CR was negatively correlated with log Kd (the soil solid/liquid partition coefficient), as expected. Although, this correlation is expected, measures of correlation coefficients suitable for stochastic risk assessment are not frequently reported. The results suggest that r ≈ -0.7 would be appropriate for risk assessment.

Measured elemental transfer factors for boreal hunter/gatherer scenarios: fish, game and berries.

The environmental assessment of long-term nuclear waste management requires data to estimate food chain transfers for radionuclides in various environmental settings. For key elements such as iodine (I) and chlorine (Cl), there is a paucity of transfer factor data, particularly outside of agricultural food chains. This study dealt with transfers of I, Cl and 28 other elements to foods that would be typical of boreal hunter/gatherer lifestyles, as well as being common foods for modern recreational and subsistence hunters. Food/substrate concentration ratios (CRs) and related transfer factors for eight species of widely distributed fish, whitetail deer (Odocoileus virginianus), Canada geese (Branta canadensis) and wild blueberries (Vaccinium myrtilloides) were measured and compared to the literature. Limited data were obtained for caribou (Rangifer tarandus), elk (Cervus elaphus) and moose (Alces americanus). Freshwater sediment Kd values and CRs for a ubiquitous freshwater macrophyte were also obtained. The CRs for I in fish were 29Lkg(-1) in edible muscle (fillets) of large-bodied species and 85Lkg(-1) for whole, small-bodied fish. The logCRs for fish and macrophytes were correlated across elements. For several elements, the Kds for sediments in deep water were approximately 4-fold higher than for littoral samples. The elemental transfers to wild animals for some elements were notably different than the literature indicates for domestic animals. It is argued that the transfer data obtained using indigenous elements from real environmental settings, as opposed to contaminant elements in experimental or impacted environments, are especially relevant to assessment of long-term impacts.

Verification of radionuclide transfer factors to domestic-animal food products, using indigenous elements and with emphasis on iodine.

Recent reviews have established benchmark values for transfer factors that describe radionuclide transfer from plants to animal food product such as milk, eggs and meat. They also illustrate the paucity of data for some elements and some food products. The present study quantified transfer data using indigenous elements measured in dairy, poultry and other livestock farms in Canada. Up to 62 elements are reported, with particular emphasis on iodine (I) because of the need to accurately assess the behaviour of (129)I from disposal of nuclear fuel waste. There was remarkable agreement with the literature values, and for many elements the present study involved many more observations than were previously available. Perhaps the most important observation was that product/substrate concentration ratios (CR) were quite consistent across species, whereas the traditional fractional transfer factors (TF, units of d kg(-1) or d L(-1)) necessarily vary with body mass (feed intake). This suggests that for long-term assessments, it may be advisable to change the models to use CR rather than TF.

Primordial radionuclides in Canadian background sites: secular equilibrium and isotopic differences.

A literature review and field sampling were done to obtain information on primordial (natural-series) radionuclide concentrations in terrestrial environments in diverse locations across Canada. Of special interest was the degree of secular equilibrium among members of decay series. The analytes measured in soils and plants were (nat)U by neutron activation-delayed neutron counting, (228)Th, (230)Th, (232)Th, (226)Ra and (210)Po by alpha spectroscopy, (210)Pb by gas flow proportional counting, (228)Ra by beta counting and (137)Cs by gamma spectroscopy. In addition, ICP-MS was used to obtain concentrations of about 50 analytes including elemental U, Pb, and Th. Samples were from seven representative background sites with a total of 162 plant samples from 38 different species. These data were supplemented by a review that gathered a large portion of the similar data from published sources. The sites chosen were semi-natural, far from any nuclear industry, although several were specifically located in areas with slightly elevated natural U concentrations. As might be expected, there were many cases of non-detectable concentrations. However, certain trends were evident. The activity ratio (210)Po/(210)Pb was unity in soils and non-annual plant tissues such as lichens. It was about 0.6 in annual plant tissues. These results are consistent with the time required for ingrowth of (210)Po to reach secular equilibrium. There was evidence from several sources that (210)Pb in plants came predominantly from deposition of (210)Pb from air after the decay of airborne (222)Rn. This was expected. Somewhat unexpected was the observation that (228)Th seemed to be much more plant available than (232)Th, even though both are in the same decay series and should be chemically similar. The difference was attributed to the combined effects of ingrowth from (228)Ra in the plant and effects of alpha recoil in mobilizing (228)Th in the soil. In general, the results of this study will benefit risk assessment, both in providing background concentrations, but also some indication of where isotope activity ratios can and cannot be used to estimate concentrations.

Revision and meta-analysis of selected biosphere parameter values for chlorine, iodine, neptunium, radium, radon and uranium.

There is a continual supply of new experimental data that are relevant to the assessment of the potential impacts of nuclear fuel waste disposal. In the biosphere, the traditional assessment models are data intensive, and values are needed for several thousand parameters. This is augmented further when measures of central tendency, statistical dispersion, correlations and truncations are required for each parameter to allow probabilistic risk assessment. Recent reviews proposed values for 10-15 key element-specific parameters relevant to (36)Cl, (129)I, (222)Rn, (226)Ra, (237)Np and (238)U, and some highlights from this data update are summarized here. Several parameters for Np are revised downward by more than 10-fold, as is the fish/water concentration ratio for U. Soil solid/liquid partition coefficients, Kd, are revised downward by 10-770-fold for Ra. Specific parameters are discussed in detail, including degassing of I from soil; sorption of Cl in soil; categorization of plant/soil concentration ratios for U, Ra and Np; Rn transfer from soil to indoor air; Rn degassing from surface water; and the Ca dependence of Ra transfers.