RESUMO
The compositions of Dutch lightweight packaging waste (LWP) and sorted products named "PET (Polyethylene terephthalate) trays" have been determined on object level. Additionally, the PET trays from both waste types were sorted in 16 categories representing their packaging use and material build-up. The material composition of at least 10 representative trays from each category was determined with chemical and thermal analysis, based on which the average material composition per category was established. Based on this data the average material composition of sorted PET tray products was approximated. The recyclability of the various categories of PET trays was assessed based on their material build-up. The most ubiquitous PET trays in Dutch LWP and sorted products were only found to be suitable to produce opaque recycled PET with mechanical recycling processes. Whereas only some more uncommon PET trays can be used to produce transparent recycled PET with mechanical recycling processes. Depolymerisation is deemed to be a more appropriate recycling process that will allow the production of transparent food-grade recycled PET.
Assuntos
Polietilenotereftalatos , Embalagem de Produtos , Reciclagem , Reciclagem/métodos , Gerenciamento de Resíduos/métodos , Países Baixos , Resíduos , Eliminação de Resíduos/métodosRESUMO
Currently, the management of polyethylene terephthalate (PET) trays waste is still challenging since this packaging affects the consolidate recycling of PET bottles. It is important to separate PET trays from the PET bottle waste stream to avoid its contamination during recycling process and to recover a higher amount of PET. Hence, the present study aims to evaluate the environmental (by means of Life Cycle Assessment, LCA) and economic sustainability of sorting PET trays from the plastic waste streams selected by a Material Recovery Facility (MRF). For this scope, the case of a MRF in Molfetta (Southern Italy) was chosen as reference, and different scenarios have been evaluated by assuming different schemes of manual and/or automated PET trays sorting. The alternative scenarios did not achieve very pronounced environmental benefits over the reference case. Upgraded scenarios resulted in overall environmental impacts approx. 10 % lower as compared to the current scenario, with the exception of the climate and ozone depletion categories where differences in impacts were much higher. From an economic point of view, the upgraded scenarios achieved slightly lower costs (<2 %) than the current one. Electricity or labour costs were necessary in upgraded scenarios, but in this way fines for PET trays contamination in PET streams for recycling were avoided. Implementing any of the technology upgrade scenarios is then environmentally and economically viable, when the PET sorting scheme is performed in appropriate output streams through optical sorting.
RESUMO
The building and construction industry is a key sector behind the ecological transition in that it is one of the main responsible factors in the consumption of natural resources. Thus, in line with circular economy, the use of waste aggregates in mortars is a possible solution to increase the sustainability of cement materials. In the present paper, polyethylene terephthalate (PET) from bottle scraps (without chemical pretreatment) was used as aggregate in cement mortars to replace conventional sand aggregate (20%, 50% and 80% by weight). The fresh and hardened properties of the innovative mixtures proposed were evaluated through a multiscale physical-mechanical investigation. The main results of this study show the feasibility of the reuse of PET waste aggregates as substitutes for natural aggregates in mortars. The mixtures with bare PET resulted in less fluid than the specimens with sand; this was ascribed to the higher volume of the recycled aggregates with respect to sand. Moreover, PET mortars showed a high tensile strength and energy absorption capacity (with Rf = 1.9 ÷ 3.3 MPa, Rc = 6 ÷ 13 MPa); instead, sand samples were characterized by a brittle rupture. The lightweight specimens showed a thermal insulation increase ranging 65-84% with respect to the reference; the best results were obtained with 800 g of PET aggregate, characterized by a decrease in conductivity of approximately 86% concerning the control. The properties of these environmentally sustainable composite materials may be suitable for non-structural insulating artifacts.